SLD: recreate deleted Business System of type Integration Server

Hi,
accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Any ideas to create such a business system?
The old one isn't there in the list, after i deleted it.
regards,
ms

Hi,
If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
Maintaining a Business System for the Integration Server
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Regarding Integration server in Business System
Regarding Integration server in Business System
Refer editing the Business System
http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM

Similar Messages

Business System of type Integration Server In SLD .

Hi
Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
And also can we have only one Business system of the type integration server in the sld ?
Can anyone please explain the concept behind this.
Thanks
Nilesh.
Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AM

hi,
steps to create a business system
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
To define a business system, follow post installation steps from install guide.
http://service.sap.com/instguides
SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
If you do not have integration server, that means your XI will not work.
Thanks,
Vijaya

Problem by Maintaining a Business System for the Integration Server

Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
Naycho

Hi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

Unable to create Business System with role Integration Server

hi Experts,
we are unable to create a BS with role of integration server, its throwing error with internal server 500.
please advise. we do not have any issues while creating TS with role of WEBASABAP.
thanks and regards,
Kesava
Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AM

Hi Kesava,
what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
best regards,
Markus

Configure Role of Business System " as Central Integration Server , PI

Hi Experts,
I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
Regards
Praveen

Hi Praveen,
For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role of business system as Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as '/sap/xi/engine?type=entry'.
Thanks & Regards,
Priyanka Anagani

Registration of Business system for the Integration Engine Java in the SLD issue

Hi,
We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
- Configuration Wizard: PI-AEX initial setup
- Configuration Wizard: PI Self Test for AEX
However when we were Checking the AEX Configuration as per help.sap.com
Check the registration of a business system for the Integration Engine Java in the SLD:
 Enter https://<host>:<port>/sld .
 Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
 The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
More information: SAP Note 1435392
for us the Pipeline URL is as below
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
and the rest " ?ximessage=true " is not there.
Also we ran the below wizard
Configuration Wizard: PI Self Test for AEX
and it finished successfully without any issue.
Any Suggestions what could be missing.
Thanks,
Regard
Ahmed Mohammed

Hi,
I found the below SAPNOTE which confirms that the Pipeline URL should be
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
However on help.sap.com it is different.
Any one experienced the same ?
Regards
Ahmed Mohammed

Business System Names during integration

Hi
I have a number of ABAP Proxy integrations between ECC and PI. My question relates to the name of the sender service when it appears in PI.
I have a system that is defined in the SLD as XXX009 (where XXX is the SID and 009 is the client number). Now when making proxy calls to my legacy system (PI 7.11) it appears as XXX009 but when calling my current system (PI 7.31) the sender system appears as XXXCLNT009.
Can I ask why the business system names are different? Why is one XX009 and the other XXXCLNT009 when the source ECC system is the same? It doesn't make sense?
Regards

Hi Robert,
A Business System can be a reflection of your SAP ECC system.
You register it in the SLD via transaction RZ70. This registration will create a technical system.
The name of the business system can be chosen freely. That is the reason why you see differences.
What I do is this: on the ECC system, go to transaction SCC4 and choose the relevant client.
Have a look at the business system name. Use that one in the SLD.
Generally, Business Systems reflecting an SAP ERP/ECC system are created like <sapsid>CLNT<client>
Hope this clarifies.
Kind regards,
Dimitri

Use PI as "Application System" instaed of "Integration Server"

All,
i have quite complicated scenario in which:
message is sent ECC > XI, this mesage triggered number of sub-interfaces XI>OraDB (via jdbc), each sub-interface activate DB stored procedure (which returns large data volumes). all returned data should be "re-packed" into IDocs which are submitted back to ECC.
I tried to encapsulate all "sub-interfaces" in a simple ECC->XI proxy interface generated coed, and implement the DB calls as XI>DB (Proxy2JDBC) interfaces. in order to enable these interfaces (for which the start point is XI) i had to change the XI (at sxmb_adm and SLD) to "Application System" instead of "Integration Server". at this point i re-tested my proxy interfaces ECC>XI and they were not working?
how can this be done?
any other possible solutions to the above scenario?
Regards'
uri

uri karagila wrote:
All,
> i had to change the XI (at sxmb_adm and SLD) to "Application System" instead of "Integration Server". at this point i re-tested my proxy interfaces ECC-->XI and they were not working?
>
> how can this be done?
> any other possible solutions to the above scenario?
>
> Regards'
>
> uri
Does your sys. Admin is aware of what you are trying to do?
You better not....
Don't let your customer define the interface to you.
You are not just a SAP PI developer.
You should be looking at the whole business process and
tell the customer what is the best way to implement the interface.
And so, I believe this integration dilemma can be simplified.
Good luck.

System Landscape : Corresponding Integration server not maintained

Hi Guys,
In ECC, SXMB_ADM - > Integration Engine Configuration
Edit ->Change Global Configuration data
System Landscape tab...
It shows System Landscape : Corresponding Integration server not maintained
I have maintained the corresponding integration server in the SLD where in the business I created for ECC,
I put the business system that I have created for Integration server
Yet The error persists...any idea?
Regards,
Teja

Hi Guys,
I have done all the setting suggested,,
then came across a thread on the forum
Unable to load Integration Server data from SLD
Regarding the System Landscape button in transaction sxmb_adm -> Integration Engine Configuration,
this button is obsolete and no longer works correctly. You can ignore the error message you get.
Thanks,
Teja

One business system and two FTP server locations

Hi,
We have one business system and two FTP server locations related to it. We have to send two different messages to this business system.
It has to be send to both the ftp server locations.
How do we configure the receiver determination and receiver agreements ?
Do we need two receiver Business systems for this?
How do we configure the receiver agreements especially?
Urgent
Regards,
John

hi
1) you must create 2 CC, each one to one FTP server.
2) how you send diferent message to each FTP yo only have to define 2 Reveiver determination, and two Interface Determination.
3)one sender Agreement
4)2 receiver agreement.
take in mind you only have 1 BS you must create 2 receiver determination, else if have 2 one receiver would be enouhgt
Thanks
Rodrigo

No Business Systems refresh in Integration Directory

Hello,
I'm working with an installation of XI NW 7.0 SR3 ABAP+JAVA on Windows
MSSQLServer.
I've created many outbound and inbound interfaces and imported idocs
too in a specific software component.
I've imported the busines system linked to the software componed in
Integration Directory but it didn't contain the I/O interfaces nor
imported idocs.
Result of this is that when I try to use Condition in Interface
Determination this error occured:
Problem loading Schema Description.
Message interface does not exist in any software components installed
on this business system.
Can you help me?
Thanks a lot,
Fabrizio

Hi,
If you get the following msg while selecting the BS in Receiver Determination
"Message interface does not exist in any software components installed on this business system"
1) Open ID-----Double click on Business system that which u are using in the scenario
2) Check whether you are able to see the SWC in the Othere attributes TAB
3) If it is not there means goto SLD----Open the Technical System of R/3 by choosing Web as ABAp type
4) Click on Installed Products TAB
5) Click on Add New product and add your Product of the SWC whcih you are using for developement and Save it
6) Then goto Business systems TAB in the same Technical systems window and click on the Business System appears in the window.
7) Click on Installed products and Check the check box of your Product and then finally save that.
Now you should be able to see the SWC in the Othere attributes TAB in ID
Regards
Seshagiri

I am not getting Business System into my Integration Directory.

Hi All!
This is satish, I created Business system in SLD. How to get them in Integration Directory.Please help me.
Thanks in advance!

Hi Satish,
Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
Then
2 options to refresh the cache-
Integration Directory->Environment->Clear SLD Data Cache
Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
Then synchronise the same by SLD cache refresh as mentiond.
changing BS
Also refer for more-
Problem in Assigning the Business System
Hope this helps,
Regards,
Moorthy

Business Systems and Related Integration Servers

Each Standalone Business System has a corresponding Related Integration Server.
Suppose I am Developing a scenario for a Business System in the development environment, I have a related XI Development Integration Server (call it XD1) then I want to transport the changes to the test environment. Since this business system is defined to only point to XD1 as the integration server, in the test environment I want it to use the Test Integration Server (call it XD2). But the Business SYstem is pointing to XD1 only!
What I am saying is: Given that one Business System only points to one Integration Server, do I need one Business System for Development (call it BS_DEV), and one for test (call it BS_TST)?
Kind Regards,
Tony.

If you have only 1 sld and you want to move the XI objects from development(XIDEV) to Quality(XIQA).
you will have to define the 2 business system groups and the related transport targets in the SLD..
1st transport group XIDEV --
BS_DEV will have XIDEV as the integration server.
2nd transport group XIQA --
BS_QA will have XIQA as the integration server.
So you will have to name the business system differently as DEV and QA
Some references
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Cheer's

SLD: Pointing two business systems to the same client...

Hi Guys,
Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
Thanks,
Harsh

Harsh,
>>Finally all collapse to one client in production.
Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?
Take a look at this document for multiple SLD transports. Should answer all doubts,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Bhavesh

SLD: recreate deleted Business System of type Integration Server

Similar Messages

Maybe you are looking for