SLD server connection is inactive

Hi,
"SLD server connection is inactive is shown" by executing RSGET_SMSY
SLDCHECK -> is ok
SLDAPICUST -> is ok
LCRSERVADDR -> is set
SMSY_SETUP->Edit->expert setting -> testet with all Blank and with serveral user data
SLD is working fine by connecting via http !
We use a Solution Manager 7.1 with SLES 10
Thanks
Steven

Hi,
Could you please check, if the SMSY_SETUP expert settings are empty,
as LANDSCAPE_FETCH uses only SLDAPICUST transaction
for connection data.
Maintaining expert settings at the same time will confuse the job.
Please make sure the alias & primary RFC destination are correctly set,
as well as checking that the user/password combinations are also valid.
Please review SAP Note 757204 regarding the SMSY-SETUP expert settings
empty.
#757204 - SMSY: The connection to the SLD server is inactive
Regards,
Aidan

Similar Messages

Solution Manager 3.2: SLD server connection is inactive SCDT_LIS_IF011

Trying to execute an automatic data transfer from SLD to Solution Manager 3.2 with transaction SMSY_SETUP, I have recieved the update log message:
The SLD server connection is inactive
Message no. SCDT_LIS_IF011
SLD Connection Test displayed:
No business system maintained in SLD
--> check data integrity within the SLD
We customized transactions SLDAPICUST,LCRSERVADDR, SMSY_SETUP->Edit->expert setting as requested in SAP documentation and definied technical, system and business landscapes in SLD (SLD server log: no errors found).
Some suggestions how to fix it?

Hello Christine,
due to the fact that we (up to now) have no need for a business landscape, we created one manualy to test if the check would get a bit further then.
We created a business landscape with the following settings:
Technical System: Web AS ABAP
System: <solution manager>
Business System Role: Application System
Related Integration Server: (no integration server defined)
Testing the Connection wit SLDCHECK we got this error message:
23.11.2005 Exchange Infrastructure: SLD Connection Test 1
Properties of RFC destination SAPSLDAPI
RFC host: %%RFCSERVER%%
program id: SAPSLDAPI_J2E
gateway host: solman32
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server address settings:
host name: solman32
port number: 50100
Use transaction SLDAPICUST if you wish to maintain the SLD server address
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Testing the SLD API
SLD API ping was successful
Clearing the local SLD cache
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
solman
Calling function LCR_GET_BS_DETAILS
Retrieving data from the SLD server...
Function call returned exception code 5
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations

SLD server connection is inactive SCDT_LIS_IF011

After install and test SLD into XI 3.0, I am trying to customizr a Solution Manager 3.1 to connecto with SLD using SYSM_SETUP. I configure RZ70, SLDAPICUST, and SMSY_SETUP->Edit->expert setting as requested in SAP documentation.
When I try from SMSY_SETUP, Schedule data transfer from lis/SLD, the update log returns a message:
The SLD server connection is inactive
Message no. SCDT_LIS_IF011
When executing SLDCHECK I get all checks with green status except:
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found
=> Check the SLD data content for the current system client
Summary: Some non-fatal exception has occured, but connection to SLD works technically
=> Check and maintain the SLD data content
Checking SLD data content, no error reported found.
Someone have some sugestion how to fix it??

Hello,
We met this problem too.
However, we solved the problem. In our situation, it was becasue the sldapiuser was locked on SLD. The following is our solution.
1. logon to http://<sldhost>/<port>/sld to check the ID and password of the SLD user (e.g sldapiuser)
2. fill in the user and password in /sldapicust
3. go to /smsy_setup Edit<<expert settings and then fill in the same user with the one you have in sldpicust
4. check the SLD connection with /sldcheck
Good luck!
Eddie Teng

SMSY_SETUP: via SLD: "The SLD server connection is inactive"

Hi folks,
setting up the Solman 4.0 and want to replicate our landscape from our System Landscape Directory.
I followed the instructions in SMSY, set the RFCs etc.
- set the user / pw in SLDAPICUST
- in SMST_SETUP, in the expert settings: put the right user (Administrator), host and port of the SLD
I checked customizing with transaction SLDCHECK ->everything ok, except it's coplanming that it cannot find settings for my Solman-client (yellow).
When triggering the Data transfer via SMSY_SETUP, "SLD", I get in the application log this error message:
"The SLD server connection is inactive", (Message no: SCDT_LIS_IF011)
"Access the SMSY_SETUP transaction to check the connection data for SLD in the expert settings"
Has anybody an idea how to "activate" the SLD server connection?
I cannot find anything what I am missing there...
Thanks
Christian

Hello Christian,
Please check the following document in SAP Service Marketplace. It has been designed to tackle with some of the questions on system data exchange between SAP Solution Manager and SLD, with an overview on all required steps and guides as well as some tips and tricks.
It also contains answers on how to proceed when the SLD Server is inactive:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000530282007E, see especially chapter 5. Answers to questions 1 and most probably to question 3 (in current document version on slide 7).
I hope this helps to solve your issues.
Best regards,
Doreen

Smsy_setup and The SLD server connection is inactive

Hi all,
I am trying to use smsy_setup to populate systems in smsy.
when I run the program I get the following error.
Solution Manager 4.0 by the way
The SLD server connection is inactive
    Message no. SCDT_LIS_IF011
Diagnosis
    An error occurred during communication with the System Landscape
    Directory.
Procedure
    Access the SMSY_SETUP transaction to check the connection data for SLD
    in the expert settings.
The expert settings in smsy_setup contain the follwing values.
Write Data Back into SLD
Default CPU Load AC
Multiple SLD Servers
Hide Progress Display
SLD Host             apslm
Namespace in SLD     sld/active
SLD Server Port             50100
SLD User             slddsuser
AC CPU Load Warning Value     65
doe anyone have idea as to what could be wrong?
regards,
Kevin Hill

Hi Sasha,
Are you able to connect to the SLD through the browser via http://server:port/sld
I removed everyhing from the smsy_setup except for the namespace at it works fine now.
Have you entered all the relevant data in sldapicust transaction ?
regards,
Keivn Hill

SLD server connectivity

i have read that a portal consultant is required to accomplish the task of connecting to SLD server by configuring HTTP connection parametres..
can anybody please explain what it is in detail
thanks in advance
krishna

Generally the portal doesn't need SLD, but if there's a web dynpro application running on the same instance, then that may require a Jco Destination to be configured.
If you look at the SLD data supplier service in Visual Admin on the portal instance, then you will see the connectivity parameters for sending the Web AS details to SLD.
Cheers

SLD Configuration error: Dispatcher running but no server connected!

Hi Gurus,
In t-code solman_setup under SLD configuration, the error dispatcher running but no server connected is prompted in the web browser.
Also, I've noticed that in SAP MMC the server0 in AS Java Process table has a return code error of -11113.

JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -XX:MaxNewSize=341M
-> arg[ 4]: -XX:NewSize=341M
-> arg[ 5]: -XX:MaxPermSize=512M
-> arg[ 6]: -XX:PermSize=512M
-> arg[ 7]: -XX:SurvivorRatio=2
-> arg[ 8]: -XX:TargetSurvivorRatio=90
-> arg[ 9]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 10]: -XX:+HandlePromotionFailure
-> arg[ 11]: -XX:+UseParNewGC
-> arg[ 12]: -XX:+DisableExplicitGC
-> arg[ 13]: -XX:+UseTLAB
-> arg[ 14]: -XX:+PrintGCTimeStamps
-> arg[ 15]: -XX:+PrintGCDetails
-> arg[ 16]: -verbose:gc
-> arg[ 17]: -Dsun.io.useCanonCaches=false
-> arg[ 18]: -Djava.awt.headless=true
-> arg[ 19]: -Djco.jarm=1
-> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 22]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 23]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 24]: -Djava.security.policy=./java.policy
-> arg[ 25]: -Dsys.global.dir=G:\usr\sap\SMP\SYS\global
-> arg[ 26]: -Dapplication.home=G:\usr\sap\SMP\DVEBMGS00\exe
-> arg[ 27]: -Djava.class.path=G:\usr\sap\SMP\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SMP\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_17-x64\jre\bin\server;C:\j2sdk1.4.2_17-x64\jre\bin;C:\j2sdk1.4.2_17-x64\bin;G:\usr\sap\SMP\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SMP\SYS\exe\uc\NTAMD64
-> arg[ 29]: -Dmemory.manager=2048M
-> arg[ 30]: -Xmx2048M
-> arg[ 31]: -Xms2048M
-> arg[ 32]: -Xss2M
-> arg[ 33]: -DLoadBalanceRestricted=no
-> arg[ 34]: -Djstartup.mode=JCONTROL
-> arg[ 35]: -Djstartup.ownProcessId=2184
-> arg[ 36]: -Djstartup.ownHardwareId=E1203704103
-> arg[ 37]: -Djstartup.whoami=server
-> arg[ 38]: -Djstartup.debuggable=no
-> arg[ 39]: -Xss2m
-> arg[ 40]: -DSAPINFO=SMP_00_server
-> arg[ 41]: -DSAPSTART=1
-> arg[ 42]: -DCONNECT_PORT=64999
-> arg[ 43]: -DSAPSYSTEM=00
-> arg[ 44]: -DSAPSYSTEMNAME=SMP
-> arg[ 45]: -DSAPMYNAME=solmanprd_SMP_00
-> arg[ 46]: -DSAPPROFILE=G:\usr\sap\SMP\SYS\profile\SMP_DVEBMGS00_solmanprd
-> arg[ 47]: -DFRFC_FALLBACK=ON
-> arg[ 48]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 49]: -DSAPSTARTUP=1
-> arg[ 50]: -DSAPSYSTEM=00
-> arg[ 51]: -DSAPSYSTEMNAME=SMP
-> arg[ 52]: -DSAPMYNAME=solmanprd_SMP_00
-> arg[ 53]: -DSAPDBHOST=SOLMANPRD
-> arg[ 54]: -Dj2ee.dbhost=SOLMANPRD
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 3032] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 3384] Tue Nov 30 16:51:03 2010
[Thr 3384] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 3384] Tue Nov 30 16:51:04 2010
[Thr 3384] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 3384] Tue Nov 30 16:51:05 2010
[Thr 3384] JLaunchISetClusterId: set cluster id 1030850
[Thr 3384] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 3384] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Tue Nov 30 16:51:12 2010
10.572: [GC 10.572: [DefNew: 174592K->11860K(261888K), 0.0496237 secs] 174592K->11860K(2009856K), 0.0496873 secs]
Tue Nov 30 16:51:16 2010
14.788: [GC 14.788: [DefNew: 186452K->15631K(261888K), 0.0420753 secs] 186452K->15631K(2009856K), 0.0421219 secs]
Tue Nov 30 16:51:20 2010
18.420: [GC 18.420: [DefNew: 190223K->19899K(261888K), 0.0434161 secs] 190223K->19899K(2009856K), 0.0434632 secs]
Tue Nov 30 16:51:27 2010
25.759: [GC 25.819: [DefNew: 194491K->28552K(261888K), 0.0664462 secs] 194491K->28552K(2009856K), 0.0665127 secs]
[Thr 2512] Tue Nov 30 16:51:28 2010
[Thr 2512] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 2512] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 2512] JLaunchCloseProgram: good bye (exitcode = -11113)

Content Server connection problems

SAP Content Server connection problems
I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
I thought maybe the httpd.conf file was wrong so I tried:
Listen 0.0.0.0:1090
In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
I also changed StorageDriver from SAPDBStorage to FSStorage.
I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
Thanks to all for any help. Points will dutifully be rewarded.
David

Hi Henk,
It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
David
Edited by: Dave Hill on Mar 28, 2008 12:00 AM
Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
David
Edited by: Dave Hill on Mar 28, 2008 1:06 AM
Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
/sapdb/programs/bin
Then type
./x_server start
I'm not sure what user it should run under but I started it as the sdb user.
You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
Thank you Henk, I'll call this problem solved and award points.
Edited by: Dave Hill on Mar 28, 2008 2:10 AM

SLD server exception: IO error: Read timed out

Hi,
I have deployed the components for NWDI and after that when i am creating the Domain,I am doing update CMS data for creating a Track. I am getting the following error:
SLD server exception: IO error: Read timed out
Can any one help on this.
Thanks
Ravi.S

Hi,
My SLD is a PI 7.0 system and my NWDI is configured on a standalone Java system.
I have done the SLDDataSupplier check, and it connects fine to the SLD.
Also on my http://<hostname>:<port>/devinf/main in the NWDI system, the SLD link points to the right SLD and im able to connect.
Still at the CMS update stage it gives the error -
SLD (URL http://<hostname>:<port>/) server exception: IO error: Read timed out

Cannot connect to abap server, please check your abap server connection

Installed new NW BPC 7.5 system on windows 2008 server but get the error as follows
when logon to BPC server:
"Cannot connect to abap server, please check your abap server connection".
"define system user group tab" is inactive in server manager also.
Server Diagnostic errors for SAP Server Connection:
Database Connection
Status Connection Error
as per note 1385864 but this note has not helped get past this status with installation.
User Type value is either set to Communication Data for all three users (BPC_ADMIN, BPC_SYSADMIN, BPC_USER).
and these accounts are not locked.
Any ideas for these errors?
Regards,
Aidan

Hi Aidan,
"Your logon id (domain\user) does not have SystemAdmin rights; some functionality
is disabled."
This is caused by the fact that the user you are logged in as isn't in the UJA_SVR_DEFAULT table, the SYSADMIN field needs to have a value that contains your user id (i.e. DOMAIN\USER) . You can set this up with the UJA3_WRITE_SYS_USERS program.
"When I try to install APPshell the following errors occur:
@8O@ UJA_DATA_CHECK E 006 Application PLANNING's multiprovider /CPMB/ATMKOOE not exist in BW
@8O@ UJS_EXCEPTION E 003 Errors occured during "after import" method call during activation"
Aidan, sounds like something went terribly wrong during your activation process. Do this, Clean the appset with the UJS_ACTIVATE_CONTENT program and make sure that everything is completely deleted. Make sure that there is a lot of memory available for the activation and try it again.
It should work.
Hopefully this helps you.
Cheers, Scott

SLD server Start Failure

Hi All,
I have found that the Jco connections got affected for the EP7 system, the reason of which was SLD server failure. I have found that the SLD server was stopped.
I have started it anyway, but wanted to know why it stopped. The following are the logs found. Can anybody help in getting the reason.
#2 11/09/2007 04:32:23.259 [SAPEngine_Application_Thread[impl:3]_5] WARNING com.sap.lcr.sagent.DataSupplierServlet: Request ignored! Received data for SLD bridge from 163.243.220.221. Bridge not started.
#1 11/07/2007 21:25:06.469 [SAPEngine_Application_Thread[impl:3]_10] WARNING com.sap.lcr.sagent.DataSupplierServlet: Request ignored! Received data for SLD bridge from 163.243.220.221. Bridge not started.
#0 11/07/2007 16:44:47.705 [SAPEngine_Application_Thread[impl:3]_24] FATAL com.sap.lcr.start.StartDirector: SLD start failure, profile parameter ObjectManager.BufferInstances must be set to FALSE in J2EE cluster environment. Change the SLD profile and start the application again.
Thanks,
VR.

Hi Vera,
From SLD manual; qoute "On an SAP J2EE Engine cluster with more. than one node, you must set the parameter BufferInstances to "false""
Page 19 from the manual below,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fd876513-0a01-0010-65ad-a63701bedd8d
Regards
Juan

EP not starting, Error : Dispatcher running but no server connected

Hi all,
i am getting the following error when i try starting the EP.
Dispatcher running but no server connected
Details : No details availaible
and on the mmc i see that for One of the instancce . the process List has 3 processes
1) msg_server.EXE
2) disp+work.EXE
3) igswd.EXE
all are shown as running but seems there is some problem with disp+work.EXE as it is being shown in yellow colour and not green..
please let me know if any one of you have faced this problem.
i tried restarting the server and machine but it din work
thanks,
rohit

Hi Bryan ,
i had made few changes in EP module and since then my server is not starting properly. i am not able to login to EP module. so i made changes in UME using configtool.
I changed DataSourceConfiguration to use dataSourceConfiguration_r3_rw.xml and used user J2EE_ADMIN . since then while server comes up it gives some error related to service jms_provider.
so before putting the trace here , can any one tell me which is the default dataSourceConfiguration ? and also what user do i specify ??
i just want to fall back to default datasourceconfiguration
here is the current trace when using dataSourceConfiguration_r3_rw.xml
stdout/stderr redirect
node name : server0
pid : 5276
system name : N4S
system nr. : 01
started at : Sat Nov 04 17:37:33 2006
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 4632] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Loading: LogManager ... 4015 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 125 ms.
Loading: ThreadManager ... 63 ms.
Loading: IpVerificationManager ... 15 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 610 ms.
Loading: LockingManager ... 156 ms.
Loading: ConfigurationManager ... 5797 ms.
Loading: LicensingManager ... 62 ms.
Loading: CacheManager ... 407 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (31 ms).
Service cross started. (47 ms).
Service memory started. (16 ms).
Service timeout started. (859 ms).
Service file started. (1547 ms).
Service trex.service started. (109 ms).
Service p4 started. (10062 ms).
Service classpath_resolver started. (250 ms).
Service caf~eu~cc~api started. (23265 ms).
Service jmx_notification started. (93 ms).
Service userstore started. (0 ms).
Service log_configurator started. (31093 ms).
Service locking started. (16 ms).
Service http started. (828 ms).
Service naming started. (1704 ms).
Service ts started. (203 ms).
Service javamail started. (500 ms).
Service licensing started. (32 ms).
Service failover started. (140 ms).
Service appclient started. (78 ms).
Service jmsconnector started. (79 ms).
Service iiop started. (765 ms).
Service connector started. (219 ms).
Service webservices started. (1235 ms).
Service deploy started. (29500 ms).
Service configuration started. (78 ms).
Service MigrationService started. (31 ms).
Service bi~mmr~deployer started. (109 ms).
Service dbpool started. (4344 ms).
Service caf~eu~gp~mail~cf started. (63 ms).
Service com.sap.security.core.ume.service started. (5875 ms).
Service caf~eu~odi~mnuacc started. (68281 ms).
Service caf~runtime~connectivity~impl started. (45359 ms).
Service security started. (7828 ms).
Service applocking started. (125 ms).
Service keystore started. (1547 ms).
Service classload started. (1343 ms).
Service shell started. (235 ms).
Service tc~sec~securestorage~service started. (187 ms).
Service tc~eCATTPing~service started. (31 ms).
Service jmx started. (2094 ms).
Service servlet_jsp started. (2328 ms).
Service caf~um~metadata~imp started. (94 ms).
Service telnet started. (453 ms).
Service ssl started. (94 ms).
Service caf~um~relgroups~imp started. (438 ms).
Service basicadmin started. (1391 ms).
Service adminadapter started. (469 ms).
Service prtbridge started. (1625 ms).
Service tc~sec~wssec~service started. (282 ms).
Service dsr started. (515 ms).
Service com.adobe~DocumentServicesConfiguration started. (1000 ms).
Service com.adobe~LicenseService started. (1234 ms).
Service ejb started. (1438 ms).
Service apptracing started. (390 ms).
Service tc.CBS.Service started. (46 ms).
Service monitor started. (1828 ms).
Service caf~eu~gp~model started. (31 ms).
Service CUL started. (4422 ms).
Service tc~eu~jwf~ui~wizsvc started. (1781 ms).
Service com.sap.portal.pcd.gl started. (7609 ms).
Service webdynpro started. (10172 ms).
Service com.sap.portal.prt.sapj2ee started. (2500 ms).
Service rfcengine started. (5688 ms).
Service caf~eu~er~service started. (2093 ms).
Service com.adobe~DataManagerService started. (7953 ms).
Service tc~sec~destinations~service started. (10328 ms).
Service com.adobe~TrustManagerService started. (750 ms).
Service pmi started. (391 ms).
Service com.adobe~DocumentServicesLicenseSupportService started. (2110 ms).
Service com.adobe~DocumentServicesDestProtoService started. (672 ms).
Service developmentserver started. (9891 ms).
service jms_provider ================= ERROR =================
Cannot start service DQE; it has hard reference to service jms_provider which is not started.
Service tc~sec~vsi~service started. (1187 ms).
Service sld started. (13172 ms).
Service com.adobe~DocumentServicesBinaries2 started. (1657 ms).
Service com.adobe~PDFManipulation started. (18609 ms).
Service tc.monitoring.logviewer started. (28031 ms).
Service com.adobe~FontManagerService started. (36906 ms).
Service com.adobe~XMLFormService started. (6938 ms).
ServiceManager started for 138203 ms.
Framework started for 150360 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel March 23, 2006 18:47 GMT
### Excluding compile: com.sapportals.portal.prt.jndisupport.util.AbstractHierarchicalContext::lookup
Nov 4, 2006 5:42:09 PM ...p.portal.ivs.semantic.systemLandscape [SAPEngine_Application_Thread[impl:3]_26] Fatal: Failed to create initial folders for system landscape
service jms_provider ================= ERROR =================
Nov 4, 2006 5:45:14 PM ...services.webdynpro.WebDynproContainer [SAPEngine_System_Thread[impl:5]_88] Fatal: Error occured during preparation of application startup.
Here is the trace.

Error when access EP - Dispatcher running but no server connected- details

Hi every body:
I have problem when I try to access SAP EP with URL: http://192.168.122.82:50000/irj/portal
I tried to activate the debug remote, I access on configTool and on the section of process node I activate the options of debugabble, enable debugable , restricted load balancing.
Then I apply the changes and restart the services and my SAP EP didn't run. I try to deploy my app on NWDS and the it can't connect with vm and check whether the SAP J2EE Engine is up and running.
All the services are running.
Then I try to revert the configuration of debug to try deactivate the options, apply and restart the services but my SAP EP get the error:
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
Details: No details available
All the services are running.
I post this on the thread, where I post some details
SAP EP Error: Dispatcher running but no server connected!
But I find a detail on dev_serv0.log
And I saw a difference on this attribute:
On SAP EP DEV
DLoadBalanceRestricted=yes
Djstartup.debuggable=no
And SAP EP QAS
DLoadBalanceRestricted=no
Djstartup.debuggable=no
And I check the configuration on SAP EP DEV and the checks of debug and restricted load balance are inactive
I think that this atribute no change, how can I change this attribute. ???

Hi Jesus,
Please check the service in SAP MMC are running or not. if not running, then you need to check the log file to identify the root cuase of the issue. If it is running fine then update the host and ip address in the host file and acces the portal with fully qualified domain name (fqdn) like http://<host>:<port>/
Best Regards
AJ

SLD Server can not start

Dear Experts, 
I need your help... 
 
I installed ABAP+Java stack (ECC6.0 and SAP J2EE Engine/7.00 PatchLevel 109886.44). 
When I view http://myserver01:50000/sld, I saw that the SLD server is stoped and I can not start it even I click "Start Sever button", system gave me error message "Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes.". 
 
I checked the log in Administration tab, the log said: 
=========================================== 
#4 12/20/2009 19:40:06.390 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.start.StartDirector: SLD start failure, unable to activate the SLD CIMOM. Check the log of the persistence medium for any errors. If the error is reproducible, please send a message to SAP. More... 
#3 12/20/2009 19:40:06.375 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.objmgr.core.TransactionContainerChangeBuffer: Storing changes to cache failed. Please restart the application to reinitialize the cache.(Error: CIM_ERR_FAILED: Failed to initialize cluster notification sender.) More... 
#2 12/20/2009 19:40:06.375 [SAPEngine_Application_Thread[impl:3]_6] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More... 
#1 12/20/2009 19:40:06.31 [SAPEngine_Application_Thread[impl:3]_6] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More... 
#0 12/20/2009 19:40:06.31 [SAPEngine_Application_Thread[impl:3]_6] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More... 
=========================================== 
 
Could any one tell me how to start up the SLD? 
More information: When I click Administration>details>Data, I saw: 
================== 
Nothing Available 
Model Version (sld/active): No model loaded 
SAP CR Content Version (sld/active): (SLD server stopped) 
================== 
But when I checked the location of E:\usr\sap\EC6\SYS\global\sld\model, I can see cimsap.zip and CR_Content.zip files there. 
 
 
 
Further more, I was a little bit confused about the SLD HTTP Port, that is during the installation parameter setting phase (SAP Sytem-> Central SLD), I choose SLD destination as "Register in existing central SLD(default)", and set SLD port to "8089", SLD Data Supplier User as "SLDDSUSER", but I can not find user "SLDDSUSER" in ABAP SU01, it's very strange. when I tried to view http://myserver01:8089/sld, it said "Page can not be found", could you tell me what's the difference between these two URL: Http://myserver01:8089/sld and http://myserver01:50000/sld? 
 
There are totally two questions(one problem and one question) of mine, any suggestions is welcome and it's surely that I will follow up and close this thread for the effective solutions.
 
Thank you very much in advance. 
 
Best regards, 
Nick 
 
Edited by: Li Nick on Dec 20, 2009 5:33 PM
Edited by: Li Nick on Dec 20, 2009 5:34 PM

Hi Nick,
1. Is SLD a pure java component that ABAP system should connect it through gateway port (JCo or something else..) and Java engine connect it directly with HTTP/HTTPS?
Above statment is right
2. So, the mechanism of Solution manager to manage all the systems is also based on SLD? Can we monitor all the system landscape without Solution manager, just SLD instead?
SLD is central repositoy to store system data present in landscape , Solution manager is used to monitor all the system using SLD also.
We can't montior system by just using SLD.
3. The functionality of the Visual Administrator->Cluster->Server->Services->SLD Data Supplier is to provide user inforamtion of the system that will be registered info. onto the SLD server, not configuring the SLD Server? (SLD is configured through Webpage port 50000 and to-be registered server is configured through Visual Administrator?
SLD Data Supplier is a area in As java system where you provide the information of existing SLD system ( the Exisiting SLD mean where SLD services is running )
SLD is purely java component
user SLDDSUSER belongs to the "TO-BE Registered" system, not the SLD server, am I understanding right?
SLDDSUSER belong to SLD server
so, the event of "Trigger SLD data transfer" is to send system information to the SLD Server
Yes.
Thanks
Anil

SLD server has stopped; start the SLD server in Administration

I am trying to configure Technical Systems in SLD (for deploying a webdynpro application which has models). Logged in as Administrator. I see this message when I login from the portal (https://host:port/sld):
"SLD server has stopped; start the SLD server in Administration." And all the links are greyed out.
When I log in to the Visual Admin, services->Sld->and tested the connection (with same ID as Administrator), I see "connection test failed CIMClientObject"
What ID, password should I be using for testing the connection for SLD in visual Admin. Or is this related to ID password at all.
Thanks
Srinivas

Thanks for the replies!
I still have the same problem.
When I select the SLD Data Supplier under services in Visual Admin, I see an error on the task bar at the bottom: SLD_Collector_Task
When I open this item, I see the following error message:
"2008.12.10@10:51:20: HTTP call failed: Failed to send HTTP data: 503 : Service Unavailable. Please check if the target SLD system is available and the SLD bridge is started there"
Is this something related to SLD configuration.
Thanks
Srinivas

SLD server connection is inactive

Similar Messages

Maybe you are looking for