SLD Technical server name

Hi,
I work on CE 7.2 SP03, while configuring SLD in the initial step I entered Object Server Name as "ABC.PQR.XYZ" which is my server name. But when I go and see in the technical setting it shows host name as "ABC" and its not showing full name.
Please suggest.

Hi Patana,
please check this note:
#1172643 -- Error when setting the name of the SLD Object Server
(http://service.sap.com/sap/support/notes/1172643)
...this case, you must also refer to Note 935245. If you do not apply the patch, the valid value range is limited to letters, numbers and "_" (underscore), and the first character must not be a number.
(The note 935245 is under rework right now so you cannot access it, but I believe the above mentioned note answers the question.)
Best Regards,
Ervin

Similar Messages

SLD Object Server name

Hi,
This is for PI 7.0.
I got to http://<hostname>:50000/sld and choose Administrator link.
On the right middle/bottom there is a Object Server name. This Object Server name is localhost. Where do I have to change it so I can see the actual host. I am expecting it to be a actual host name. My SAPLOCALHOSTFULL is set to full name.
Please let me know if anybody has any idea about it.
Regards.
Sume

What do you mean by assumptions Mr. Ahmad?
I have done the post installation steps for SLD and ran the template as well. They all finished successfully. Now as I said that it an AIX server, you can never open a SLD home page from the server. It has to be a windows based machine. I use my laptop to open the web pages of lot of SAP related stuff like /sld or /unseradmin etc. What I do is I type
http://dpix100:50000/sld.
Now you see from the above that I am not using localhost but rather an actual host to login.
So I do not know what you mean by are you working from ur local machine or working on XI server directly because I can never work directly from XI server as far as opening a SLD page is concern.
Now when you install XI on AIX/UNIX, by default it has localhost at lot of places. One has to change it. Read my last reply where I am saying how to change it and read the SDN link as well.
My question is that I do not se that Object Server link on the Administrator page.
Please reply if anybody has any idea about it.
Regards.
Sume

LMDB - SLD "Source and target system have the same object server name"

Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AM

problem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph

SLD - Technical System Wizard - Select System: Only None (Standalone J2EE)

Hi, I want to connect to some RFC-Modules on a SAP/R3 System from my NetWeaver Web DynPro Application. Therefore I have to create JCO-Connections for the Models I created (MODELDATA_DEST and RFC_METADATA_DEST). For this I have to define the System I want these JCO-Connections to connect to in my SLD which I'm trying to do using the "Technical System Wizard". (SLD -> Technical Landscape -> New Technical System -> Web AS Java (because I'm developing a Java Application).
In the next screen I have to specifiy the location of my Server. I thought, that here, I have to define my SAP/R3 Server to which the JCO-Connections for my two models shall be connected. But the only option I can choose for "Web AS ABAP" (The ABAP System where my RFC-Modules are stored I guess) is "None (Standalone J2EE)".
Why is that? Or am I missing something? I thought I have to specify the SAP/R3 System containing the RFC-Modules here and not my local NetWeaver Server.
Thanks for your help
Thomas

Hi,
there seems to be a misunderstanding here. For JCO to work you need to set up the ABAP-System as a technical system in SLD, otherwise the Java-System is not able to determine information like Hostname and Portnumber for the RFC. Of course it's good to set up your WAS-Java in SLD as a technical system as well, but for the JCO the ABAP side is more important as far as I can see.
To have a clean start I suggest that you set up all involved technical systems in your SLD.
Regards,
Jörg

SLD Technical system data in ABAP table?

Hi All,
Can some one guide me ABAP table name where I can see all the SLD Technical system entries?
Or can read SLD Technical system entries via some BAPI/RFC.
Regards

Check LCR_GET_BS_DETAILS. In se24 check for Cl_SLD* , you will get some classes which will help you get the information.
What are the Technical system data you are looking for ?
In program SXMS_PF_GET_OWN_IS_NAME_MC , go through the subroutine get_sld_content.

Application server name

Hi
I have created an open hub , please sugget me how to set the appl server name in File tranction.please tell me step by step procesdure in file transction for setting the logical file path .
thanks in advance

Hi Sreeanil,
The steps should be:
1.- Go to FILE T-code. You should be in the "Logical File Path Definition" on the left panel.
2.- Select New Entry, and enter a new Logical Path (Technical name and description). Then Save.
3.- Once you save, go back to the previous screen, select the new line, and press on (or double click on) "Assignment of Physical Path to Logical Path" in the left panel.
4.- Choose the syntax group (Windows or unix/linux). Then write the physical path:
SERVER\FOLDERS\<SYSID>\<FILENAME>
If you put <SYSID> you will get the Server ID. At the end of the Path put <FILENAME> (to take the file name, from the below steps). Save.
5.- On the left panel, choose "Logical File Name Definition, cross Client" write all the boxes, and the last one should be the Logical Path created in step 2. Save.
Remember:
<SISID> gives you the server name.
<DATE> gives you the actual date (at the moment of the execution)
<TIME> gives you the actual time (at the moment of the execution).
Hope it helps.
Regards, Federico

WebtopNaming - can not find server name for server ID

We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

List of server names

Is it possible to get a list of server names that Adobe uses for hosting Creative Cloud apps and services?
I am stuck behind a whitelisting firewall and any domains I need to access have to be listed specifically.
Thanks

Well... this morning I tried it again and it worked, without my having to change anything!
I then managed to get Edge Animate to install after simply retrying 20 times.
It seems there was some problem with Adobe's servers but what else is new?

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

WRT610N - Unable to change "Server Name" - No Text box.

I have my WRT610N running V2 firmware. In all of the documentation I see, on the Admin area within the Storage Tab, there is a text box next to the Server Name and you are able to update that field to change the Server Name. However, I have no textbox here, and thus am unable to change the Server Name. I've attempted factory defaults, firmware upgrades, and multiple reboots to attempt to solve the issue. Any help out there?
Thanks in advance

Whats the Firmware version is installed on your Router and whats the Version number of your Router? If it's an Version 2 Router, then it doesn't have an option to change the Server Name. As far as i know the Version 1 Router has an option to change the Server Name.
If its an Version 1 Router and if you have updated the firmware, with the latest firmware you don't have an option to change the Server Name, By Default its WRT610N.

E72 connected to wifi but 'invalid server name' pr...

I had no problems connecting to the wifi at the mobile phone shop but have the 'invalid server name' problem at home. however, my husband who is using Nokia too has no problems using the home wifi on his phone.
it shows that the phone is connected to the wifi but when i try to browse, it tells me that the server name is invalid. I have had phone conversations with people from Digi, Nokia and the phone company all day long and this continues to be a problem

Delete all browser privacy data.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to pass database logon info to a Crystal Report in a subreport with different server name using VS C #

Post Author: fabu1971
CA Forum: .NET
I could pass the database logon in Reports with subreports but the reports with subreports with different server name I can not pass the logon information . Do you have any idea how I can do that to pass the database logon with different database or server name ?

Post Author: quafto
CA Forum: .NET
You can use the Subreports collection of the ReportDocument object to access all the subreports in your main report. These are returned as ReportDocument objects. Once you have your subreport as a ReportDocument you can loop through your Tables collection and set the ConnectionProperties to your appropriate Server/Database. For example here is some pseudo code: ConnectionInfo boConnectionInfo = new ConnectionInfo();boConnectionInfo.ServerName = "serverName";boConnectionInfo.DatabaseName = "databaseName";boConnectionInfo.UserID = "username";boConnectionInfo.Password = "yourpassword"; foreach(ReportDocument boSubreport in mainReport.Subreports){ foreach(Table boTable in boSubreport.Database.Tables) { TableLogOnInfo boTableLogOnInfo = boTable.LogOnInfo; boTableLogOnInfo.ConnectionInfo = boConnectionInfo; boTable.ApplyLogOnInfo(boTableLogOnInfo); boTable.Location = "newtablelocation"; }}

Get error when passing a server name to Crystal Report

I am developing a desktop application using VS 2012 with CRforVS_13_0_9 and CRRuntime_64bit_13_0_10 installed. The database is SQL Server 2012 Express. I use SQL OLEDB in Crystal Report to connect the SQL database. Here is part of the codes.
Dim crTableLogoninfo As New TableLogOnInfo
Dim crConnectionInfo As New ConnectionInfo
Dim crTables As Tables
Dim crTable As Table
With crConnectionInfo
.ServerName = Login.sServer
.DatabaseName = Login.sDatabase
.UserID = Login.sDBUserID
.Password = Login.sDBPassword
End With
Try
crTables = CReport.Database.Tables
For Each crTable In crTables
crTableLogoninfo = crTable.LogOnInfo
crTableLogoninfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogoninfo)
Next
CrystalReportViewer1.ReportSource = Nothing
CrystalReportViewer1.ReportSource = CReport
I get an error "Failed to open connection -- Database vendor code 17" when I run a Crystal Reports through my application. The problem is Crystal Reports does not like the server name which is passed. The purpose for passing a server name is to connect to different server if needed. I am not 100% sure the error occurs after VS 2012 or SQL Server 2012 express was updated.
Any ideas how I can fix this problem?
Thanks,
John

Hi John
First, you want to check the error code in your database documentation. The error is being passed from the db client through the report engine totally unmodified. Googling the error will also be a good idea.
And, seeing as you are using SQL Server 2012, make absolutely sure that the SQL Native 11 client is installed.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Domain name/"primary DNS" name/mail host name/mail server name/mx name

Hi,
I have registered my domain name (N.com) with an external dns server and created an MX record (mail.N.com) for it as well. My server sits behind a router and internet traffic is port(80)-forwarded to my server's fixed internal ip address (I can access my webpages from the internet just fine). When I initially setup the server I was asked to give it a "primary DNS name." I naturally assumed that N.com was supposed to be entered here, but that just caused all kinds of problems (though I still do not understand why). So I reinstalled and currently have server.N.com as the primary DNS name of the server (although it shows up in Server Admin and Workgroup Manager as server.local--why is that?)
I have had no luck getting any email from the internet with the default settings in mail services (domain name of N.com and host name of server.N.com). Having no luck with the defaults, I assumed that maybe I needed to change the host name to "mail.N.com" so that it matched the MX record. I also changed the user preferences in Workgroup Manager to receive mail from mail.N.com--but still no luck. Could someone tell me what I am doing wrong and how come none of the Mail Service literature mentions anything about what a mail "host name" is supposed to be? Is it supposed to be the same as the "Mail Server" name that Workgroup Manager asks each user for? and is it the same as the MX record name?
I am just needing some help to connect all these variously named, but undefined, dots.
Also, how come I can access webmail from the internet using www.N.com/webmail but can't do it from any computers within my physical network (I have to use IPaddress/webmail or server.local/webmail)?
Also, should my user email addresses be [email protected] or [email protected] (which is the current default)?
Thanks in advance and good luck!
John

I had been told by a friend that ... regular email coming in from the internet would go through port 80
Unfortunately you were misinformed.
My MX record needs the extra subname (such as "mail") in front of the domain name, right?
Not at all. A MX record for 'N.com' is entirely valid (expected, in fact).
An MX record tells remote mail servers where to send mail for any domain/subdomain. If you think about it, let's say you worked for Apple and you wanted people to be able to send email to [email protected], well then you need an MX record for 'apple.com'.
You can see if you dig MX apple.com that they actually have 9 MX records, but the point still stands.
Now, you might also have MX records for subdomains so that you can have [email protected], [email protected], [email protected], etc. Each of these subdomains would need a separate MX record.
So, in general, for any set of email addresses @[anything.]domain.com you have a MX record telling remote mail servers where to send that mail.
Of course the MX record name is mail.N.com, but I think you are implying that the in the Mail settings of Server Admin where it asks for domain name all I need to put there is the N.com, right?
What I mean is that you need to set the domain name to whatever domain name you expect to receive mail at.
If you want users to have email addresses in the form of [email protected], then you enter 'N.com'.
If you want users to have email addresses in the form of [email protected] then you enter 'mail.N.com'.
If you want both forms, enter one in the main domain and add the other(s) in the Advanced -> Hosting -> Local Host Aliases section.
Is there anything in the Mail settings that needs to have the full MX record name (mail.N.com)?
Yes. Either the 'domain name' or the 'Local Host Aliases' needs to contain the same thing as your MX record. That's because the MX record tells remote servers to send mail to this machine, but the machine won't accept the mail unless it is configured to do so.
What is the "host name" supposed to be?
This should be the name that remote servers see when this machine tries to send outgoing mail.
Ideally this should match the reverse DNS of your IP address, that way when it connects to a remote server it says "Hi, I'm $hostname" and the remote server can lookup the machine's IP address and see the same result. This will reduce the problem of remote servers thinking you're sending them spam.
If you only have a single IP address then this probably needs to be something like 'N.com'. If you don't have control over your reverse DNS then you're going to run into a problem.
Also in the user accounts (in Workgroup Manager) what should the "mail server name" be? Is it the host name or the domain name?
Off hand, I don't know.
Also, why are all the default user email addresses [email protected] (the name I gave the server at setup)? Why doesn't the user accounts create [email protected] as the default address?
Presumably because the mail server says it is 'server.N.com' and therefore any accounts on that machine would be [email protected]. Changing the domain name (as above) should fix that.

How to find out SSRS report server name

I'm trying to follow the steps for using SSRS web services (http://ssrstutorials.blogspot.com/2012/10/lesson-12-using-ssrs-web-services.html).
In Step 3:
Click advanced--> add web reference -- url - http://localhost/reportserver/reportservice2005.asmx
(replace localhost with your report server name).
How do I know what's my report server name?
Thanks,

Hi sherri71,
Sorry for that mark an incorrect reply as an answer.
The reply suggested by Akbar is about Instance Name, not report server name. Based on my further research, I find that the Reporting Services server name is the computer name which install
the report server. So we can try to click Start button, right-clicking Computer, and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
If there are any other questions, please feel free to ask.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

SLD Technical server name

Similar Messages

Maybe you are looking for