SLD to SMSY synchronization - Which product version do we have to choose ?

Hello,
We do have a CPP system running on SAP ECC 6.0 version.
1. In SLD, we do have the list of all "Software Components" used in CDP.
    We do not have the "PRODUCT VERSION" of the managed system.
2. With job SAP_SLD_DATA_COLLECT (RZ70), all data are sent from CDP (managed system) to SLD.
3. With LANDSCAPE FETCH job, all data are synchronized between SLD and SMSY.
Now, how can we choose the right "PRODUCT VERSION" to set in SMSY ?
As far as there is not "PRODUCT VERSION" defined in SLD, do we have to set manually a PRODUCT in SMSY ?
Is there any guide or OSS Notes which describe, step by step, the full workflow process synchronization
from (1) Managed System to (2) SLD to (3) SMSY ?
Thanks
Best regards
PC

Hi,
As I have observed, when the data sync happens between SLD and SM system, the product versions are also assigned.
Sometimes, the product assigned through SLD sync may not be correct or may be irrelevant to your scenario,
In that case, you should always manually edit and assign the correct product version in SMSY, to avoid any conflicts arising in further setup of EWA, SMD setup etc.
For ECC 6.0, you can goto SMSY>systems>search for SAP ECC-->your system CPP/CDP should already be present under SAP ECC through SLD landscape fetch job.
Select that system, and in the header data tab u can see the Installed product versions.
There you can always change the relevant products for your systems.
Hope this helps.

Similar Messages

  • Which model version do I have?

    iTouch PB533LL. Which version do I have?

    jmsfmtex,
    Use this article to help you determine what generation and model your iPod Touch is.
    http://support.apple.com/kb/HT1353
    B-rock

  • BIOS upgrade for MS6156 which BIOS version do i have?

    Hi Guys,
    i've got to upgrade my BIOS i think after reading these forums. I have a MS6156BX7 V2.1 motherboard. When i boot, i see W61562XMS V1.5 31400. I also see Award BIOS V1.0.
    Can anyone tell me which is the BIOS version that i have? Is it 1.5 or 1.0? Also can you direct me to the correct one as i can't afford to screw this up, important info on the HD.
    Another problem is that i have an NTFS boot partition. Do i flash the BIOS the same way?
    cheers
    Spawny

    http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=259&kind=1
    http://www.msi.com.tw/html/support/bios/note/ntfs.htm

  • Which Flash version do I have?

    Hello,
    where can I find out, which version of Adobe Flash CS3
    Professional I have installed (not player)?
    I can't update to 9.0.2 or 9.0.3. Or do I have this latest
    version yet?
    Under "help, about" there is version 9.0 listed
    Greetings, Carlos

    cmeira wrote:
    > Hello,
    > where can I find out, which version of Adobe Flash CS3
    Professional I have
    > installed (not player)?
    > I can't update to 9.0.2 or 9.0.3. Or do I have this
    latest version yet?
    > Under "help, about" there is version 9.0 listed
    >
    > Greetings, Carlos
    >
    find the EXE file in program files, right click and you will
    see detail version number.
    Best Regards
    Urami
    "Never play Leap-Frog with a Unicorn."
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Which OS version do I have ?

    My recently purchased Qosmio E10 Notebook has a Microsoft hologrammed decal on the base which says 'Windows XP Media Center Edition 2004 ( 1-2 CPU )'
    Before using I added Service Pack 2 with a CD and downloaded the latest Bios, ie 1.6 (10/09/2004).
    However when I look at 'System' in ' Control Panel ' I find that I have 'Microsoft Windows XP Media Center Edition 2002 SP2'
    Moreover running PC Diagnostic in 'Toshiba Console' I see that the OS recognised is 'XP Professional 5.1.2600 SP2'!!
    So when I visit Toshiba's website for updates under which OS do I make a selection ?

    Hi
    I have found some information that Windows XP MCE displays Version 2002 in the System properties. According to Microsoft this is because the upgrade to WXP MCE 2004 or 2005 does not change the properties in My Computer.
    If you want to determine MC version, start please Media Center and on the settings menu click on General. Scroll down and click About Media Center.
    The version number of the application that you are running will be displayed.
    Bye

  • Which AICC version do I have?

    The host of my LMS is asking which version or level of AICC I have. I am running Captivate 6. Is there any way to check to see which version of AICC I have?

    OK.  That makes sense.  About the ONLY advantage AICC has over SCORM is the ability to reference content that is not on the same domain as the LMS web server.  AICC passes it's information in the URL strings, whereas SCORM does it via a JavaScript API.
    If you have access to the project CPTX files for your published content you should be able to open up the project in Captivate 6 and go to the Quiz settings to just verify that it is indeed published for AICC.  Captivate doesn't give you any choices as to which version of AICC it uses.  (Unlike SCORM which it offers several version options for).  However, in digging through the code inside the published output I found that it appears to support up to AICC version 3.5.
    Hope that helps.

  • Which software version should I have?

    I have a Silver vision box, and can't help but think I'm stuck on an old software version.
    Sys info tells me:-
    TV2 client version: 2.1.2295.1115(release)
    Platform os/version: wince/5.0.1400
    Bootstrap rom version: 1.1527
    Stb/CPU: pace philips_DiT9719_05_L3/297
    Is this old or current?
    Thanks

    I've got the same model box as you, and it's on the same software version.
    The silver boxes are now obsolete.  The chances are that BT will never do another update to the software for them.  They certainly can't be updated to the new software that is being rolled out on the later black boxes.

  • Which SAP Product version to assign to a Logical Component in SMSY (SOLMAN)

    Dear SAP Colleagues,
    In our SAP environment, we do have 2 versions of ERP systems :
    1. CON - SIF - CDP systems are 'SAP ERP Central Component 5.0' product version.
    2. CDD - CDT - CDP systems are 'SAP ECC 6.0' product version.
    Question :
    When I want to assign these systems to a Z_LOGICAL_COMPONENTS, which product version do I have to choose ?
    Example for CON - SIF - CDP systems :
    1. They are 'SAP ERP Central Component 5.0' product version.
    2. In SMSY in our SOLMAN system, logical component are created using
        'SAP ECC 5.0' product version.
    Example for CDD - CDT - CDP systems :
    1. They are 'SAP ECC 6.0' product version.
    2. In SMSY in our SOLMAN system, logical component are created using
       'SAP ECC 6.0' product version.
    Question :
    What about 'SAP ERP 2004' and 'SAP ERP 6.0' product version ?
    In which case must I use this product version to assign CON-SIF-CPS
    or CDD-CDT-CDP to new Logical components ?
    Are they OSS Note or any matrix which give me the right product version to choose ?
    I have heard that 'SAP ECC x.x' product version should not used any longer ?
    Thanks
    Best regards
    P.C

    Hi,
    Read the following document, the mapping for systems and component versions is described in here:
    https://websmp202.sap-ag.de/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf
    For ECC 6.0 you should select ERP 6.0
    regards,
    Jaap

  • QC Activity based on Material Production Version

    Hi,
    Normally, we perform QC activity based on Material Code, i.e. in Material Master we maintain inspection type in QM View for material which needs QC activation during Good Receipt from Production
    Is it possible to perform QC Activity based on Production Version of a material i.e.
    For Example
    Product A having 2 Production Versions
    IF Product A with Production Version 1 then No QC required during goods receipt from production
    IF Product A with Production Version 2 then QC required during goods receipt from production
    So please tell me what feasible solution possible from your side
    With Regards,
    Kunal Sheth

    Dear Sap User,
    Production version is nothing just a combination of Master recipe/Routing and BOM used for particular production or process.
    If you are having so many production version then you have to choose which you want to choose but if you are having a single production version then it will be chosen automatically.
    Do it once and revert in case of any query.
    Rgrds,
    Dheeraj Rawal
    Edited by: Dheeraj89 on Feb 9, 2012 6:13 AM

  • SMSY: Product version SAP R/3 ENTERPRISE 47X200 keeps returning

    Hi,
    Last year we have upgraded our SAP R/3 ENTERPRISE 47X200 system to SAP ERP 6.0.
    For downloading enhancement packages we need the product version to be SAP ERP 6.0. In SMSY however, SAP R/3 ENTERPRISE 47X200 is still mentioned in the product versions list. We can delete it manually (not used in any logical component anymore) and are able to download enhancement packages fine at that moment. However, when we refresh SMSY by reading data from the SLD the SAP R/3 ENTERPRISE 47X200 product version returns in the list of product versions and we have to delete it manually again.
    Any ideas?
    Thanks,
    Regards,
    Bart Groot.

    check the Note and one of the same threads
    Note 1296512 - SMSY: Product version transferred from deleted system
    Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

  • Production Version in Material Master

    Hi,
    I am having problems with this.
    I need to either change date on a production version or
    delete the product version.
    I have tried using a batch input sequence from my program both for changing the date
    and for deleting the production version and this all works well.
    Now this isn't good enough since there can be multiple production versions on a material
    and I don't know which line to change or delete in the batch run.
    Is there a good FM or BAPI to handle this?
    I don't want to change the MKAL table directly since there is a history table
    connected to this also (MKAL_AEND).
    What is the best approach?
    Rgds,
    /Fredrik.

    How can I use this to achieve what I want to do, either
    change the production version date or delete the production version?
    I have tried C223, but this is not good enough, nor is batch run in MM02.
    I can have multiple production versions and can not pick the correct line
    in batch run to change or delete.

  • Demand Management with Production Versions

    Dear all,
    Is it possible to link the requirements in Demand Management with a production version which I've listed in the MRP 4 view?

    Hi,
    Yes it is possible. In MD61 when you place independent demands, switch to the schedule line view & specify which Production Version you want the demand to consider.
    Hope the above clarifies.
    Regards,
    Vivek

  • MRP Run with production version.

    Hi Experts;
    I am working as a member of a SAP implementation supporting team. The client wants to run MRP with alternative BOM, not with the 1st BOM. As a solution for the requirement i created production versions and assigned to MD61 schedule line tab. It is working properly.
    But the user maintain some quantity as a safety stock for finished materials also. To cover the safety stock requirement, system create planned orders with the 1st BOM, not the production version.Already i have maintained the selection method "3" in material master.
    Is it possible to cover safety stock with alternative BOM.
    Please help..
    Thanks,
    Malka

    Hello Malka,
    For your issue,,
    As per other expert suggested you can block the first production version but if in future you want use first production then,,
    In these case you maintain production version in many way
    Ex.
    1.  Lot size .(if production version using for specific lot)
        Maintain the Lot for both production version, so Production version 1 lot completed system take       second production version.
    2. Production version validity date (If production version using for specific period )
        In this case after completion of 1. Production version period system take second one
    3. Manually selection of production version (If multiple production version and all have same condition)
        Whenever you convert the planned order to production order, one pop up come and ask for                manually selection for Production version, for this you go to OPL8 and select the Manually                production version
    I hope this information cover your all requirement, No need to go with quota arrangement
    Still you want know about the Quota arrangement, Please create new thread so other expert also provide their view
    Regards
    Umesh Mali

  • Error: Enter a valid Production Version

    Dear Gurus
                       I have a problem while production booking of a vehicle. It says Enter a valid production version. I have checked the version in Material master-->MRP4 view. The version is maintained there. What else whould i check ?
    Pls Help
    REGARDS

    Dear Gaurav,
        As this is Repetitive Manufacturing then , you should maintain the Product cost collector also. Please do maintain this & then try.
    When u enter the group no of routing & also the alternat BOM & click on check at the top of the screen, When you click on check button then, the signals will turn to green if you have used the valid BOM & Routing group no.. If you get green in this screen then, there is no problem with Production Version.
    Please do let me know for any clarifications.
    Regards
    Kalyan

  • Which driver and find out which version i currently have(driv

    I recently bought F.E.A.R. for the pc and are having trouble with the sound in the game i.e. there is none. It was recommended to me to update my sound drivers, i don't wish to have a load of unnecessary software on my pc all i want it the drivers to make my Audigy 2 ZS to function as it should do. Could someone please advise from the below page what i need to download also could someone tell me how to find out which driver version i currently have for my Audigy 2 ZS card, thanks for any and all info you can supply.
    I have used Upload'r to shorten the url because when the full url was posted it stretched everything.
    http://url.uploadr.com/93c

    Not at all, but it is New Year and still the holiday season for a lot of people, so there are probably less folks around than usual.
    The latest full/final driver is:
    <TABLE cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
    <TBODY>
    <TR vAlign=top>
    <TD vAlign=top align=right><FONT color=#330099 size=>2. </TD>
    <TD height=5><FONT color=blue>Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55 (<FONT color=#222222 size=><B>6.34 MB</B>) </TD></TR></TBODY></TABLE>
    Or, if you want a newer driver and don't mind installing a beta driver, you can use this one:
    <TABLE cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
    <TBODY>
    <TR vAlign=top>
    <TD vAlign=top align=right><FONT color=#330099 size=>. </TD>
    <TD height=5><FONT color=blue>Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002 (<FONT color=#222222 size=><B>24.99 MB</B>) </TD></TR></TBODY></TABLE>
    Cat

Maybe you are looking for

  • Family Migration Strategy needed (from mobileme)

    My brain is about to explode. I have read countless articles about mobileme to iCloud migration, and I am NOT clear as to how to accomplish this... - I have an "AppleID" ([email protected]) that I have used for my family for countless years to purc

  • How can I setup an .indd with two columns with different threads so that I can export to epub?

    Hi all. Sorry, english is not my native language. I´ve made an .indd: each page has two columns with different threads (is a bilingual text). When I export this .indd to .epub only appears one column from a thread following the next thread. What can

  • Preview doens´t work how it´s supposed to

    Hello, I have serious problems with Preview since I´ve updated my MBP 15 retina to Yosemite. Apart from my personal problems to work with the "new" Preview, all my annotations I´ve made with GoodReader (installed on my iPad) are rotated 180°. As a st

  • Hd6990 is my card faulty?

    Hi. One of my hd6990 cards has a problem.  I have been using these cards in Xfire fot some time now without a problem but today I noticed in device manager I only have three processors when I should have four. I removed one card and went back to devi

  • Results are lost when I filter by a characteristic (SEM-BCS)

    Hi! I am building a BEx report for a SEM-BCS Worksheet. I have the posting levels 00, 01, 10, 20 and 30. At first I only have the posting level upper the ratio "Period Value GC" (Columns) and the characteristic 0CS_ITEM with a hierarchy in the Rows.