SLD Transport

I would like to transport all the Product, Software Component , Technical System and Business System Information from DEV to Production SLD. The plan is to make the Production SLD, the only SLD in future.
I am thinkin of going to SLD Administration , Content and then do an Export ALL in DEV SLD and then in Production do an Import.
Is this OK or am I missing anything.

Smith,
Go through this doc:
<a href="https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202">How to handle SLD for XI</a>
-Naveen.

Similar Messages

PI and SLD Transports using CTS+

HI all,
We have a three system PI landscape (DEV.QAS.PRD)
There is a two system separate SLD landscape (DEV/QAS & PRD SLD) - this is also serving PI, NWDI, Portal, & solution manager has its own SLD.
CTS+ has been configured to transport all PI objects in a PI Domain controller.
In trying to integrate SLD to PI domain controller, the SLD transport is created, we can see it in the transport organizer but after releasing the SLD transport , it does not show up in the SLD source system defined in the domain controller? Any ideas why?
The transport content is in /usr/sap/trans/data at the file system level.
Regards, Neeta

I do not think CTS+ support SLD content transport. You have to use manual export/import mechanism from with in the SLDs.
VJ

Doubt in SLD Transport

Hi,
I have 2 SLD's, one for DEV and the second one is for PRD. we dont have the QTY.
I know how to transport the IR and the ID objects using File system.
i want to know abt SLD transport
I have created one TS for SAP R/3 system and the Corresponding BS for TS in SLD.
i have created one PRD---SWCV. i didnt create any TS and BS for this PRD and SWCV.
I used this SWCV for Development in DEV Server and now we want to transport the IR and ID and SLD
1) Do we need to create the Same PRD and SWCV in PRD server also OR is there any process to Import the SWCV from DEV to PRD??
2) we have only One TS and BS for SAP r/3 , so do we need to Export those from DEV to PRD or do u want me to create the same in PRD???
If u recommend me to export the TS and BS means what is very simple process to transport into PRD server???
Regards
Suman

Hi,
Refer
How to handle SLD for XI
https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
Preparation of SLD for Transports Using CMS in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b01876ac-abbb-2a10-788e-95a7c5a5aeca
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/300e3ca7-31cd-2a10-a6ba-87c7447d5fd7
SAP Network Blog: Placement of the SLD in large landscapes - So confusing
/people/community.user/blog/2007/02/12/placement-of-the-sld-in-large-landscapes--so-confusing
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/55/7a09d0d7d34b828a9740e322b9222c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/54/8b5b0555264a93a679c2117fedc748/frameset.htm
This PDF file will help you a lot,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Thanks
Swarup

Queries about SLD transport

Hi Forum,
want to know something about SLD transport,
1. If i transport a TS from one SLD to another, will it also automatically transport all products and software components refered by this TS,
2. If the products and Software component refered by this TS, are already present in the second SLD, will it update the software components,
3. If i transport a software component, that is already present in the other SLD, will it update it (overwrite it),
pls help

Hi,
1. If i transport a TS from one SLD to another, will it also automatically transport all products and software components refered by this TS,
>
Irrespective of whether you have a Common SLD or Different SLD's , you need not create the SWCV manually in your SLD. When you transport the SWCV and import it into your new IR, the corresponding entries will happen in SLD.
In CMS transport, you could select the individual object or namesapce or all software component to be transported.
refer below links for CMS
CMS for SAP Exchange Infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Configuration of CMS in Central NWDI & SLD to transport XI objects
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
In your source system,. say tool--> Export --> using file system and then select your SWCV. The exported TPZ file wll be placed in the EXPORT directory of your server.
Now, copy this TPZ file into the import directory of your new server and then tolls --> import.
For the export and import directories, XI Homepage --> Administration --> General Information.,
2. If the products and Software component refered by this TS, are already present in the second SLD,
will it update the software components
---> Hi yes it will update the existing Software component refered by TS. No need to create another one.
While transporting the modified object
Refer CMS links mentioned above. Here you could select the individual object or namesapce or all software component to be transported.
3. If i transport a software component, that is already present in the other SLD, will it update it
(overwrite it),
--> It depends upon the object you are transporting. For e.g if you have transported the whole software component then the existing will be overwrite. Or if you add individual object or namspace then only that part will be overwritten.
Here you have option in CMS transport to mentioned, if you wish to delete any object, then jsut delete it from development SDL i.r. IR or ID and transport deleted object to Qu. you will get that option in CMS.
Thanks
SWarup

Any one have done SLD Transport

Hi,
Iam struck up at SLD Transport.
I know how to Export & Import the TS & BS from this guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Can any one provide me the Over all general steps on
How to configure Transport groups & Targets*
Regards
Bopanna

Hi Boppana,
If you want to transort the objects let us say from Dev to Test, then follow these steps
1. Loginto Test SLD and go to Business systems, under business systems drop down box select Edit Groups and create Dev group and Test group.
2. For each group you need to assign the related integration server. You might be having alredy TS and BS defined for XI integration server in test and export and import the Dev integratuon server TS and BS. Now you have both the DEV and Test Integration servers TS and BS in Test SLD.
3. Export and import all other TS and BS for other systems into Test SLD. Once you import select each business system of Dev and goto Transports tab and on the left side select the target system which should be mapped.
You need to do this for all the TS and BS of Dev in Test SLD so that each BS of Dev will have a Technical Target defined.
Plz let us know if u have any problems
Thanks,
Srini

Does CTS+ work with SLD transport targets for ID transports?

Hi,
does CTS+ work with SLD transport targets for ID transports?
did any of you ever used it ?
thank you,
Regards,
Michal

Hi Michal
I would be interested to find out about this..
Hopefully this new project will use 7.1 and Basis are doing all the SLD and the CTS+ config..
I have every faith in them!!!! :-O
There is a document about transporting repository and directory objects, but every version I have found is corrupt - or I cannot open in Adobe...
You may have more luck!
Change and Transport System
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
"This How-to Guide explains stepby-step how to set up the enhanced Change and Transport System (CTS) for use in conjunction with usage type Process Integration (PI) of SAP NetWeaver (formerly known as SAP NetWeaver Exchange Infrastructure or SAP NetWeaver XI). CTS introduces a new transport handling mechanism that offers tighter integration for the transport of ABAP, Java, and Integration Builder objects (Integration Repository and Integration Directory) using the Change and Transport System (BC-CTS) functionality."
Maybe in six weeks I can actually answer this for you! I'm sure you'll have the answer by then!

SLD Transport issue

Hi All,
I have transport issue with SLD objects. I have different SLD's for my Development and Quality.
1) Is CMS a option to transport the SLD objects like Business systems and Technical systems.
2) I have technical System XYZ on Development system with 2 SWCV's installed for it but in the Quality i have for the same system XYZ i have three SWCV's installed, now if i transport the technical system XYZ from Development to Quality i want the additional SWCV installed for XYZ to be removed, but this is not happening, i even tried to transport the concerned SWCV and Product from Developmen to quality still the installed systems doesnt change as Desired.
Please tell me if its possible and how can be achieved.
Thanks and Regards,
Raj.

Hi,
Two types of transport mechanism are used in PI.
File transport method.
CMS transport method.
One upcoming is CTS+.
Perform the following to import/export ID objects.
1. To export or import directory objects, call the configuration maintenance screen of the Integration Builder.
2. Call the context menu for an object in a collaboration profile in the Integration Builder navigation tree and choose Export.or choose Tools ® Export Configuration Objects
3. Select the Transport Using File System mode and follow the wizards instructions. When selecting individual objects, you can use drag and drop to drag the objects from the navigation tree and drop them in the object selection field.
The Integration Builder saves a binary export file with the suffix tpz in the export directory of the directory server
Do not change the file name of the export file. If you do, the Integration Builder will not accept it as the appropriate file when you import.
4. To import the export file(s) to another Integration Directory, first copy or move it to the import directory of the target directory.
5. Call the configuration maintenance screen of the Integration Builder for the target directory. Choose Tools ® Import Configuration Objects...
6. Select the export file saved in the import directory by using the dialog box that appears.
If the import is successful, the export file is moved to the subdirectory Configuring Groups and Transport Targets
Configure the CMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Overview of Transition from Dev to QA in XI
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
regards
Aashish Sinha
PS : reward points if helpful

Required clue regarding SLD transport

Hi
i have transport Technical system , Bussiness system from dev to QA by using the file transport
the way i did like
i dev system i had created the TS as well as BS with dev XI system intergration server
again in dev system i have created the TS and BS with QA XI system integration server.
later i import the TS & BS into QA which were created with QA XI system integration server.
after that i transport amy IR & ID objects . all are working fine .
now i have to move to prod i followed the same fashon but while creating the BS for prod i can bot found the PROD XI system intgration server.
i tried in DEV as well as QA no luck .
please how can i move to prod?
thanks in advance.
Edited by: maheshhhh on Nov 18, 2011 9:40 PM

HI,
You can transport SLD object via file transport .
The blog discusses SLD Preparation
XI Software Logistics 1: SLD Preparation
This link talks about transport by CMS and File System
XI Software Logistics II: Overview
Check out this how to guide also
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808.
you have to maintin different groups....one for DEV...one for QA....one for PROD
regards,
ganesh.

SLD objects transport....

Hi Experts,
I hav a qs...can we transport BS,TS,LS from the SLD of a XI system( it may be Dev or Qua) to the SLD of another XI system (a sandbox) which is not in the same landscape....If it is possible thn pls can anyone provide me step by step guide...
Regds,
New XI..

Hi,
Either you need to manually export SLD objects from the first SLD and import that in second SLD.
Or You can transport the SLD objects by SLD transports...
have you check -
https://websmp210.sap-ag.de/~sapidb/011000358700000315022005E.PDF
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Thanks
Swarup

SLD Business transport groups

Hello,
I inherited a PI 7.1 system. I'm trying to determine if the current SLD transport groups are setup correctly. We currently have two SLDs: Design time (BS_DEV, BS_QA) and runtime (BS_PRD).
The current configuration is as follows:
In the design time SLD
Business system BS_Dev (development) is in the BS_DEV_GROUP and has a target group BS_QA_GROUP with a target system BS_QA. I think this is correct.
Business system BS_QA is in the BS_QA_GROUP and has a source group BS_DEV with the source group BS_DEV_GROUP with business system BS_DEV. But, there is no target for this system. I think it should be the BS_PRD system in the BS_PRD_GROUP.
In the second SLD, the runtime SLD has the following configuration:
The BS_DEV system is part of the BS_DEV_GROUP and has a target system of BS_PRD in the BS_PRD_GROUP. The BS_QA system has no source system and no target. I think this is wrong. The DEV_PRD system has a source system of BS_DEV of BS_DEV_GROUP. There is no reference to the BS_QA system.
Also, when the BS_QA system is configured it should have a source system BS_DEV system and a target system BS_QA, right?
I think this is configured to bypass the QA system. Do you agree? Sorry for the long post. Oh,, CTS+ is working.

Hi George,
Business system BS_Dev (development) is in the BS_DEV_GROUP and has a target group BS_QA_GROUP with a target system BS_QA. I think this is correct.
Business system BS_QA is in the BS_QA_GROUP and has a source group BS_DEV with the source group BS_DEV_GROUP with business system BS_DEV. But, there is no target for this system. I think it should be the BS_PRD system in the BS_PRD_GROUP.
This setting is fine, just that the BS_QA should point towards the BS_PRD.
The BS_DEV system is part of the BS_DEV_GROUP and has a target system of BS_PRD in the BS_PRD_GROUP. The BS_QA system has no source system and no target. I think this is wrong. The DEV_PRD system has a source system of BS_DEV of BS_DEV_GROUP. There is no reference to the BS_QA system.
Well, Technically this is not exactly wrong. Means, as you have mentioned, you inherited this environment. So, might be the QA was facing some technical issues for which QA was being by-passed, rather QA was being isolated.
Architecturally, this is completely wrong. So, you might have to change this and point the systems in the right directions.
Let us know if you have more queries.
Regards,
Neetesh
Edited by: Neetesh Raj on Aug 24, 2009 1:14 PM
Edited by: Neetesh Raj on Aug 24, 2009 1:15 PM

XI Transports general question (SLD / CTS+)

Hi all, I ve the both following question : (it is not clear for me)
1) Does CTS+ transport management use SLD transport and target data linked with business system to adapt XI configuration (ID) regarding Business sender and receiver systems ?????
2) One of my customer want to install only 2 XI system.
- 1 linked with Dev & Quality R/3 environment
- 1 linked with production R/3 system
Is it possible regarding SLD content ?
How must the transports be managed in this case using CTS ?
Thanks a lot

Hi Jeans
for more deatils related Transports have a look on these links
Create a Tranport Target for the SLD entries.
I think these blogs will help you-
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
For more -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Re: Transports
Re: Multiple SLD in DEV QA and PROD XI and ID transports
Transports in XI using CMS, assembly issue
XI Transports
Thanks !!!!

Regarding transporting for SLD

hi all,
i am transporting the scenario from DEV To QUA,my doubt is i have to create the new SLD in QUA or shall i use the same SLD (DEV SLD) in QUA.
regards,
subba reddy

Hi
look on the below links for more details
Overview of Transition from Dev to QA in XI
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
how to transport xi content using CMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Please refer:
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation - XI Software Logistics 1: SLD Preparation
SLD Transport
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Thanks,

Problem in Integration Directory after transport

Guys,
we did a SLD transport (only LD objects), with DEV and PRD groups. It had some error messages because the SWCV's from the Dev XI were not created into PRD XI, but apparently, despite the errors, the products and SWCV's were created.
After that, we've done IR and ID objects transports, through File System.
Apparently, the IR part was OK.
In the ID, it correctly changed the Business Systems from Dev Configuration to their respective transport targets. However, if we try to open any Adapter, it gives an error message:
Attempt to access the 1 requested objects on 1 failed. Detailed information: com.sap.aii.ib.core.roa.RoaObjectAccessException: Unable to read object Adapter Metadata SOAP | http://sap.com/xi/XI/System (b38bcd00-e471-11d7-afac-de420a1145a5) of type AdapterMetaData from application REPOSITORY on system REPOSITORY. Detailed information: Software component version with GUID b38bcd00-e471-11d7-afac-de420a1145a5 does not exist
And if we try to create a new Adapter, when we go to select adapter type (SOAP, File, RFC etc) it says
Search Result for All Component Versions
No objects found!
So, we can't select any adapter type.
Has anyone had this error before?
What did we do wrong in the transport?
Was it the error from the SLD transport that caused this?
Thanks in advance,
Henrique.

Hi Henrique,
Go and import the SAP BASIS 6.4 or 7.0 Software COmponent Version into Integration Repository.
For this tpz file you can get from -
Copy XI3_0_SAP_BASIS_6.40_09_00.tpz from <Components DVD>/XI /XI_CONTENT to directory /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
cheers,
Prashanth
P.S Please mark helpful answers

SLD: Pointing two business systems to the same client...

Hi Guys,
Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
Thanks,
Harsh

Harsh,
>>Finally all collapse to one client in production.
Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?
Take a look at this document for multiple SLD transports. Should answer all doubts,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Bhavesh

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

SLD Transport

Similar Messages

Maybe you are looking for