SLDCHECK error-Check and maintain the SLD content for the current client
Hi experts,
I am trying to configure PI on QAS box and getting this error when I ran SLD check. This is the only warning/error I am getting in YELLOW and the other messages were in green so thinking that is ok.
=============
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system NWQ client 001
=> Check and maintain the SLD content for the current client
Summary: Connection to SLD works technically, but the SLD content may need maintenance
=> Check and maintain the SLD data content
==========
I went through some threads and readiness check document but not able to get it resolved because I am a developer and not sure about exact steps. Please give me if you have any feedback and if there is admin jobs involved I will get BASIS help but it is totally my responsibilty to get the system up and running. Any help would be greatly appreciated.
Thanks.
Mithun
Hi Mithun,
Let me know if there is any recent changes/Patching/Upgradatiions in your server....
Perform Cacherefresh both in ABAP and JAVA Stacks..
For ABAP level cache go to SXI_CACHE -> RUNTIME->START DELTACACHE REFRESH
>>>>SXI_CACHE -> RUNTIME->COMPLETE CACHE REFRESH
CPACACHE:
For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
Please let me know if this doesnot resolve your issue.
Cheers!!!!
Naveen
Similar Messages
-
Credit check and Credit hold not working for 2 specific clients
Hello dear Oracle Support,
I would like to ask for your help in the following subject:
The Credit deppartment assign a Credit Hold and a Credit Check for 2 specific customers, but for some reason, these check boxes are not getting respected by the system, since the sales department are not getting any message or warning when creating an order. I tryed to look at these 2 check boxes at a table but I am affraid that I cant find the field, I am using the RA_CUSTOMERS table, but perhaps it is not the correct one, so I was wondering if you could give me any advice.
ThanksHi
1. IMG -- SD -- Basic funtions -- credit management/risk mgmt -- credit mgmt -- Define credit groups.
Here confirm that you have
01 - credit group sales order
02 - credit group delivery
03 - credit group for GI
2. IMG -- SD -- Basic funtions -- credit management/risk mgmt -- credit mgmt -- Assign sales document type and delivery document type
Here you have to assign
01 - to the sales order(Ex OR) types
02 - to delivery document type (Ex LF) <b>Dlv credit group</b>
03 - to delivery document type (Ex LF) <b>GI credit group</b>
<u><b>For delivery document type we have to assign to credit group one for Delivry another for PGI</b></u>
3. IMG -- SD -- Basic funtions -- credit management/risk mgmt -- credit mgmt -- Define automatic credit control (OVA8)
Maintain new combination for Your credit control area/risk categry of the customer/03 (GI credt group)
Example : 1000/001/03
maintain static/Dynamic credit check for this combination.
Note : give warning at order level (credit grp 01) and delivery level (credit grp 02)... and give error at PGI level (credit grp 03).....
So that you can see difference easyly
4. FD32 - Maintain credit limit and Risk category(001) for your customer
5. order - delivery - PGI
Try this
Hope your problem will be solved
Let me know if you have any problem
Reward points if helpfull
Muthupandiyan -
How to clear the table contents for the new selection values?
Hi,
Im developing some very basic web dynpro applications.I have created one application to demonstrate use of SERVICE CALL.Now in one of the COntext Nodes,I have one attributes as TABLE.I have 2 input fields and when i enter any sel critteria in these 2 fields,the table is populated accordingly.Now when i change the value in the input fields,the new output gets appended in the output TABLE.How do I clear the contents of the OUTPUT table attribute in the method?
Can someone tell me the common methods used with context nodes like REFRESHING,CLEARING etc?How do I know which methods to call for what action of the nodes ...like for binding internal table to any context node we use the method BIND_TABLE...
Any inputs will be highly appreciated.
Thanks!
BR,
SRM tech.Hi,
To clear the contents of the node, use invalidate method.
data: l_node type ref to if_wd_context_node.
l_node = wd_context->get_child_node( 'NODENAME' ).
l_node->invalidate( ). " all the data in the node will be cleared
To clear a single attribute you can use set_attribute_null.
Regards,
Radhika. -
How do I get the plus content for the Mac Premiere 10?
I bought Premiere 10 for the Mac. I wanted more themes etc so I upgraded to plus membership. I have not been able to get any plus content. I uninstalled and reloaded after I had upgraded to plus membership, no change. I have verified that my account says plus membership. Any ideas?
You should contact Tech Support at Photoshop.com. They're very responsive and very helpful.
But, assuming you're logged into the site when you start the program and you've got an always-on internet connection, the Plus content appears on the Mac just as it does on the PC -- right in the program, but with a little yellow banner over the upper right corner.
They're most easy to spot in the Themes and Disc Templates.
BTW, what kinds of additional content are you looking for? Custom-designed DVD and BluRay themes can be found on sites like http://Muvipix.com, often for free. -
Changing the email Content for the Contact Person Creation
Dear All
We are on SRM 7.0. We need to change he mail content that goes to the Contact Persons of Vendors. These contact Persons are created in SRM for bidding.
How to change the email content?.
Thanks in Advance.
veluHi,
Pl. follow the following steps :-
1. Create smartforms containing your own content to be sent to contact persons.
2. Implement the BADI : BBP_OUTPUT_CHANGE_SF.
3. There is one interface(method) in the above BADI e.g. :change_forms. You have to call smart forms in this interface.
I hope you may achieve your task by following the above steps.
regards
HARSHB -
HT4059 Will the iBooks content for the Malaysia store be expanded soon?
For the Malaysia App Store, will the Books content ever be expanded to include mainstream titles? Currently available are mostly classic novels.
We are just fellow users on here, we won't know until if/when Apple announce something. But before Apple can sell an item in a particular country's store they need to be granted a license from the content provider e.g. the book publisher.
Do you have access to other ebook apps/stores e.g. Amazon/Kindle, Nook, Kobo ? -
I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer. This is the error I receive: Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download. For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
-
How to view the file content from the directory? getting Error:ORA-21560
SQL> create directory READ_LOB_DIR as 'D:\Prj\Comm\Data';
CREATE OR REPLACE Procedure READ_FILE_LOB IS
-- Input Directory as specified in create directory
l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
-- Input File which is read word by word
l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
-- Separator Character between words is a BLANK (ascii = 32)
l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
-- Character at the end of the file is NEWLINE (ascii = 10)
l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
-- Pointer to the BFILE
l_loc BFILE;
-- Current position in the file (file begins at position 1)
l_pos NUMBER := 1;
-- Amount of characters have been read
l_sum BINARY_INTEGER := 0;
-- Read Buffer
l_buf VARCHAR2(500);
-- End of the current word which will be read
l_end NUMBER;
-- Return value
l_ret BOOLEAN := FALSE;
BEGIN
-- Mapping the physical file with the pointer to the BFILE
l_loc := BFILENAME(l_dir, l_fil);
-- Check if the file exists
l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
IF (l_ret) THEN
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' exists');
-- Open the file in READ_ONLY mode
DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
LOOP
-- Calculate the end of the current word
l_end := DBMS_LOB.INSTR(l_loc, l_seb, l_pos, 1);
-- Process end-of-file
IF (l_end = 0) THEN
l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
l_sum := l_end - l_pos - 1;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
EXIT;
END IF;
-- Read until end-of-file
l_sum := l_end - l_pos;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
l_pos := l_pos + l_sum + 1;
END LOOP;
DBMS_LOB.CLOSE(l_loc);
ELSE
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' does not exist');
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:' || SQLERRM);
DBMS_LOB.CLOSE(l_loc);
END;
The Text file content is...
Copyright 1996,2001 Oracle Corporation. All Rights Reserved
This file contains installation instructions for installing the
Oracle8 ODBC Driver software.
It is divided into four parts:
o Part I: Summary of systems supported by Oracle8 ODBC client
software
Lists the platforms on which the Oracle8 ODBC Client software can
be installed.
o Part II: Oracle8 ODBC Driver software.
Describes the files, and installation prerequisites for the Oracle8
ODBC driver software.
o Part III: Exploding the kit onto your system
Describes how to explode the kit onto your system hard drive.
o Part IV: Installation Instructions
Describes how to install the Oracle8 ODBC driver.
Part I: Systems supported by the Oracle8 client software
You can install the ODBC client software on any of the following systems:
o Windows 2000
o Windows NT X86
o Windows 95
o Windows 98
The Oracle8 ODBC Driver provides support for ODBC connections
from Windows 2000, Windows NT, Windows 95, and Windows 98 systems
to Oracle databases.
o Part II: Oracle8 ODBC Driver software.
Refer to the following files for information about the Oracle8 ODBC Driver:
LICENSE.TXT - Oracle8 ODBC Driver License Agreement. Read carefully
before installing and/or using this product. Enclosed in
your software distribution kit.
SQORA.HLP - A Window's Help file which is the primary reference
manual for the Oracle8 ODBC Driver.
ODBCRelnotes.WRI - The release notes for the Oracle8 ODBC Driver
which contains information which may have not been
included in the Help file.
Installation Prerequisites
See the Oracle8 ODBC Driver release notes (ODBCRelnotes.WRI),
for a complete list of software products required and their versions.
Time Required
The installation of the Oracle8 ODBC Driver takes approximately 5
minutes. The actual time may be shorter or longer, depending upon
your hardware configuration.
Disk Space Required
The Oracle8 ODBC driver installation requires approximately 2
megabytes of available storage space. The space required depends upon
what files you already have installed. The installation procedure
checks to see if you have enough available disk space. If you do not,
the installation fails.
Part III: Exploding the Kit onto your system
Expand the self-extracting archive file onto your hard drive.
C:\> ORA8174.EXE
Part IV: Installation Instructions
Oracle8 ODBC Driver 8.1.7.4.0
This section assumes the following:
1. MS Windows 2000, Windows NT, Windows 95 or Windows 98 is running.
2. Oracle Universal Installer shipping with 8.1.7 has already been
installed on your system.
3. Part III has been completed.
Software fixes:
Refer to release notes (ODBCRelnotes.wri) for a complete list of
Software fixes.
Installation Instructions
Once the self-extracting archive file ORA8174.EXE has been
exploded it will create an installable directory structure
onto your hard drive. Run the Oracle Universal Installer from
your local drive.
1. On the screen "File Locations" use the "Browse" button of
the source path to choose the file 'products.jar' from the
folder that ORA8174.EXE was extracted to. Choose 'Next'.
2. You will receive a warning that some of the dependencies of
this product are not found in the staging area. This warning
is OK. The ODBC driver depends on the Net8 Client being already
installed on the system. Answer 'Yes' to continue.
Oracle is a registered trademark of Oracle Corporation.
Microsoft, MS are registered trademarks of Microsoft Corporation.
Microsoft Windows, Windows NT, Windows 95, Windows 98 and Open Database
Connectivity are trademarks of Microsoft Corporation.
All other trademarks and registered trademarks are the property
of their respective owners.
The output was...
File testfile.txt in Directory READ_LOB_DIR exists
Copyright
1996,2001
Oracle
Corporation.
All
Rights
Reserved
This
file
contains
installation
instructions
for
installing
the
Oracle8
ODBC
Driver
software.
It
is
divided
into
four
parts:
o
Part
I:
Summary
of
systems
supported
by
Oracle8
ODBC
client
Error:ORA-21560: argument 2 is null, invalid, or out of range
I want to diplay/view as per file content format from the file under that specified directory.
Have any other method / any help or suggestions would be really appreciated.I changed the code like...
CREATE OR REPLACE Procedure READ_FILE_LOB_tmp IS
-- Input Directory as specified in create directory
l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
-- Input File which is read word by word
l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
-- Separator Character between words is a BLANK (ascii = 32)
l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
-- Character at the end of the file is NEWLINE (ascii = 10)
l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
-- Pointer to the BFILE
l_loc BFILE;
-- Current position in the file (file begins at position 1)
l_pos NUMBER := 1;
-- Amount of characters have been read
l_sum BINARY_INTEGER := 0;
-- Read Buffer
l_buf VARCHAR2(4000);
-- End of the current word which will be read
l_end NUMBER;
-- Return value
l_ret BOOLEAN := FALSE;
BEGIN
-- Mapping the physical file with the pointer to the BFILE
l_loc := BFILENAME(l_dir, l_fil);
-- Check if the file exists
l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
IF (l_ret) THEN
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' exists');
-- Open the file in READ_ONLY mode
DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
LOOP
-- Calculate the end of the current word
l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
-- Process end-of-file
IF (l_end = 0) THEN
EXIT;
END IF;
-- Read until end-of-file
l_sum := l_end - l_pos;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
l_pos := l_pos + l_sum + 1;
END LOOP;
DBMS_LOB.CLOSE(l_loc);
ELSE
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' does not exist');
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:' || SQLERRM);
DBMS_LOB.CLOSE(l_loc);
END;
Now its working fine with one addtional line...
The file content is...
This is My Content
This is My Content
This is My Content
This is My Content
This is My Content
But The output was...
File testfile.txt in Directory READ_LOB_DIR exists
This is My Content
This is My Content
This is My Content
This is My Content
This is My Content
here, i want to delete that additonal line...? -
Computer iMac7,1 has been giving sundry problems for sometime. Within the last six weeks I have reinstalled the OS (Snow Leopard),without affecting the overall contents of the hard drive.
±3 weeks later the problems became more serious and I againreinstalled the OS and installed OS 6.6.7 from the internet.
I used the option to restore from the external backup driveand went back some time as it was my intention to reinstall individualcomponent in an attempt to find out where the problem might lie. This hasintroduced an entirely new problem! If I open Time Machine from the desktop itappears that all backups from late 2009 to June 2011 are intact. But, in thiscase there are none of the restore functions &c on screen. The latter areonly shown if Time Machine is opened from the menu bar or from the dock but, inthis case, available are only backups in late 2009!
I also opened the Apple Hardware Test in an attempt toestablish the nature of the problem. The ‘quick’ version said there’s nothingwrong; the more detailed one reported “Error detected, 4HD/11/40000004.” I haveagain tried to employ this test but nothing I do can induce it to open!!!
What to do? I need help urgently and would appreciate anyadvice that offers solutions to the problem.To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.
-
Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
== This happened ==
A few times a week
== A week and a half after i installed Fox Filter. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5Hello Steve.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org]. -
HELP! Why am I getting this error message? It's driving me crazy! When I try to send an email, the message stalls in the outbox and the following message pops up - "A copy has been placed in your Outbox. Sending the message content to the server failed." I have deleted and reinstalled the account, restarted the phone, etc - what the heck? The emails work just fine at Yahoo online, so the account it fine...I don't want to hard reset the phone, as I had to do that recently and it's a pain - any suggestions?
OR they are the right settings but you are trying to send through a different internet provider or 3G provider, that does not allow that SMTP server to send email.
if I send email from 3g or someone elses wifi on a different ISP, it will not work, because it does not allow that server to be contacted. this is normal.
What you want to do is setup a gmail account and use their SMTP server settings for the defauly outgoing server. that way you dont have to worry about this. -
Error while maintaining the Update Rules for the Infostructure
Hi,
I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
Please guide me in resolving the issue.
Thanks & Regards,
Kumar.Hi,
This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
Solution provider for this will be rewarded with good points.
Regards,
Kumar. -
Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.
slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide -
How to check and maintain authorization objects
Hi Alll
Let me knowhow to check and maintain authorization objects in SU24 ECC 6.0.
Thanks
sathiesHi Sathies,
the old check flags
U
Unmaintained
No indicator set. The check for corresponding authorization object is always executed. Field values are not displayed in the Profile Generator.
N
No check
Check disabled. Field values are not displayed in the Profile Generator. This indicator cannot be set for HR and Basis authorization objects.
C
Check
Check always executed. Field values are not displayed in the Profile Generator. For example: Printer authorizations.
CM
Check/maintain
Check always executed. Field values are displayed for changing in the Profile Generator (yellow light).
Have been divided now in
Checkindicator : Check/NoCheck
and
Proposal: Yes/No.
If defaults=yes, then you can modify them after clicking on the apropriate button.
Please refer to the online help for SU24 too.
Although the look of su24 has been changed significantly, the technique behind it is still the same.
Once you have pressed the 'edit'-button on the top left corner, additional editing options will appear in the right-top-frame.
b.rgds,
Bernhard -
Iphone error yahoo mail- sending the message content to the server failed
yesterday i changed my yahoo password (because my yahoo email acct started spamming all of my email contacts) and i also changed password on my iphone 4s settings but now cant send emails (can get them just fine)
i get the error "sending the message content to the server failed" and the email gets stuck in the outbox.
i have deleted the yahoo acct multiple times, rebooted the phone and restored network settings, added other yahoo smtp.mail.yahoo.com server, went to the genius bar for an hour, but no luck. tried a new iphone at apple store and added my yahoo account, but still had the same error from their phone.
they said contact yahoo- currently awaiting that reply.
my gmail acct sends emais fine thru iphone.
any help appreciated
thanks
jbhi - i posted this in another thread but meant to post it here - oops - i've been following this thread and others for days now - i also have been having safari/email 'sending message content to server failed'/flash 10 plugin problems since latest security/java/qt software update - here's what i recommend and what i'll be doing from now on - before i install any updates via software update i'll be saving the download/installers to a folder as suggested in another topic thread - next i'll be disconnecting my router - and connecting the modem directly to the computer - bypassing the router - once i'm sure configurations/internet/mail are functioning correctly i'll connect the router - all this time my problems were with my router port settings - not safari or flash 10 plugin or mail app - go figure - hope this helps - peace!
Maybe you are looking for
-
Thanks to all, but giving up on Mac and going back to windows. Had enough!!
Thanks to all who have tried to assist with my issues with Mac movie and burning. In short, I have made a 105 minute movie which includes photos with transitions, video, some titles and backing track, music. When I "share" the movie to Quicktime, it
-
Can anyone help? I am unable to log into ICloud. When I type in my ID and password it comes back with 'incorrect password' I have changed the password several times but it doesn't help. strangely i can use my paswod to buy buy Itunes music but not fo
-
Cancellation of 101 document - Urgent
While cancelling a 101 document in MIGO, system is giving error that "Balance for transaction type group 10 negative for the area 01". PO and 101 document were created in 2007. Please respond that why system is giving such error. Regards, Aisha Ishra
-
How to change the endeca studio chart color . version is 3.1
how to change the endeca studio chart color
-
Safari, mail, software update very slow on new imac
Hello, I recently upgraded to a 21.5" i3 imac and transferred everything from my old imac (core 2 duo, os 10.4.10) anything involving the internet is painfully slow, safari 5.02, firefox, mail, even the software update (but once it "catches"- downloa