SLDCHECK for Non-XI/PI system??
All,
I have connected my Abap systems to my SLD and am successfully updating the data every 12 hours. However, I am running the test SLDCHECK on my ABAP systems and getting errors with the LCR Function Module. I have gone through the troubleshooting document mentioned in several SLDCHECK threads, and cannot find any issue. On my non-XI/PI Abap systems, do I need to make sure SLDCHECK runs clean? I plan on implementing E2E diagnotics in SMG. Or does the SLDCHECK only have to run successfully for XI/PI systems?
Plentiful points for helpful gurus!!!!
Thanks,
Jeff
RZ70 is all you need to do to connect ABAP to SLD. SLDCHECK is for Exchange Infrastructure.
-RK
Similar Messages
-
Export License Determination for Non R/3 systems
Hi Experts,
We have a non-R/3 system from where sales orders are created and sent to GTS for License Determination. We have developed an interface to load required details to create export declarations.
We would like to determine export license for the documents created in GTS. We have done all the settings required for License Determination but, still not able to determine license automatically.
Can anyone advise is it possible to determine license without r/3 feed? If it is possible, what could be the additional check we have to do.
Thanks,
SudheerThanks for your reply..
The settings which i done was determining license perfectly when the export declaration documents are created with reference to R/3 documents (proforma invoice from R/3.
I am looking for manually created document only in GTS, how can we determine export license. Is it possible to determine export license?
Thanks,
Sudheer. -
Can SAP BI (BW) stand alone as a data warehouse for Non-SAP Source Systems.
I recognize that the answer to this question depends on the version of SAP BW we are discussing. My question is one being posed to determine how SAP BW fits in with the BI world and the other tools available.
- Can a company implement SAP BI without also having the SAP ERS applications?
- If so, will SAP BI effectively support 3rd party source systems and what is needed to make it effective (NetWeaver XI, NetWeaver 2004s)?
Thanks for your expertise.
Dennyhi dear,
clearly the most valuable input given by BW is a native integration with all SAP world...
well, you can manage a BW without having a SAP ERP as source system:
http://help.sap.com/saphelp_bw33/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/frameset.htm
(DBconnect, BAPI...)...
Hope it helps!
Bye,
Roberto -
SMD agent for VMW-based SAP systems
SAP talents:
We have hard time to configure SMD agents for VMW-based SAP systems.
We have followed some SAP documents for non-VMW-based SAP systems, but seems that SMD agent cannot
differentiate the individual system on VMW.
Our SMD agent has no problem for non-VMW-based systems.
Thanks!Sorry to reply late because we have attempted a lot of fixes but all failed
For example, we have QAX, QAY and QAZ on VMW.
On Wily Introscope:
1) QAZ simply does not show up even we deployed/configured the agents as the procedure specified;
2) under the node QAX, we see QAY's entry as a sub-entry.
Does each SAP system need an agent OR only one agent is enough? We have tried both ways but
seems not working properly either way.
Please help, thanks a lot! -
FICA -IDOC for posting the billing data from NON-SAP ISU system
Hi,
Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking for the transaction data IDOC which is CTRACDOCUMENT_ACCOUNT (FICA Posting) in the WEDI. But it seems that it is not yet released. Can anybody help me out for this to either identify the equivalent IDOC or other method to post the data from Banner system (NON-SAP ISU ) system. We are presently not implmenting billing system in SAP ISU, but only FI systemHi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh -
Data Mapping Templates for NON-RTA Systems
Hi all,
I'm designing n extractor for my NON-SAP System.
I've been reading the Appendix B: Data Mapping Templates for Non-RTA Systems from Configuration Guide - SAP GRC AC 5.3.
I have a couple of questions regarding the size of two fields in table ACTION PERMISSION OBJECTS TEMPLATE
Is correct the size that the documents says about fields:
ACTION (document says it's 20 but in other tables is 50)
PERMISSION (document says it's 10 but in other tables is 100
ACTVT (document says it's 10but in other tables is 50)
Thank you in advanced.Hi Luis,
Yeah i will follow the recomendations but i'm updating some files to RAR and i've seen another kind of inconsistency such as in the table User File Template. Recomendation says that both FNAME field and LNAME field are 50 size each one but in my case i can update a FNAME 51 size and a LNAME 49, i mean between FNAME and LNAME it's 100 size.
Cheers. -
Solution Manager System Monitoring for non SAP system
Dear Support,
I have configured the CCMS Agent (SAPCCMSR) for non-SAP system (Windows 2008R2).
The system information (e.g. CPU, Memory, Disks etc) has already showed in RZ20 of Central Monitoring system (e.g. Solution Manager).
How can I do to configure to display these information in the Alert Inbox tab on System Monitoring Workcenter?
Best regards,
Fan HungHi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way? -
Target system install problem (SAPINST searching for Non unicode kernel)
Hi,
I'm currently performing a unicode conversion (from 4.7 to EHP4). I am finished with the upgrade and I'm now in the unicode conversion part.
I have completed the export and selected unicode as the target system. I am done with source system uninstallation and I'm now installing the unicode target system. I have selected unicode during the parameter selection (it's the default option anyway) but during the part where it will ask for the kernel DVD, it doesn't accept the path of my unicode kernel (and instead looks for the non-unicode kernel)Hi Markus,
Thanks for your response. This problem is now resolved. It turns out that there are some remaining files from the old /usr/sap/<> and /sapmnt/SID/exe that were not deleted yet (after uninstalling for non unicode system). I proceeded to delete again these files and ensure that there are no files from the non unicode system -
'Error Occured in the Source System' for Non SAP system
Hi Gurus,
We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
Please suggest me how to proceed for this error for Non SAP Systems?Hi,
Check the RFC connection in SM59 and reactivate the source system again.
Hope this helps..
Thank you,
S R. -
EWA report for non-abap systems
Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
VirgilioHi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram -
How to setup EWA for non-ABAP system with SM 4.0 ?
Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
Thanks.Hi Andrew,
we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
This is the old, available standard solution. At the moment we develop it also for java stand alone.
I think it will be available with the new ST-SER in autumn
Regards,
uDo -
Hi,
We are planing to implement EWA for Java systems. Currently EWA is active for all ABAP systems. Do we need Wily Introscope in order to setup the EWA for non-ABAP systems? Or just we can use the SMD to generate EWA reports for Java systems?
Any idea?
Thanks,
KrisThanks Paul
We are on SM 7.0 EhP1. But I see following info in note 976054. It says data sources for EWA are different on 7.0 EhP1, does it mean we don't need wily from 7.0 EhP1 onwards?
Data sources in Solution Manager Diagnostics up to SP17 used for EWA for non-ABAP components analysis are:
- Introscope (SAP Note 797147),
- Garbage Collection (SAP Note 1079125) and
- Portal Activity Reporting (SAP Notes 936612 to know how to activate PAR and 914791, 1075276 to configure SQL
Command Console).
Starting with Solution Manager 7.0 EHP1 (SP18) the data sources are:
- Solution Manager BI for performance data
- Configuration and Change DB(CCDB) for configuration data
Thanks,
Kris -
OTO information not complete for non ABAP instance of system &1 in SMSY
Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban HartzsteinHello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein -
Roles for Testing ChaRMs for Non-Abap Systems
Hi,
Can you please suggest what all authorizations are required for Testing the ChaRM functionality for non-abap systems
Thanks in advance
Regards,
Reddihi
check the link
Check the Configuration guide for the prerequisites. -
Cannot use system rollback segment for non-system tablespace 'TEMP
Hi everyone!
I encountered this error: "Cannot use system rollback segment for non-system tablespace 'TEMP"
So this is what I did to check if the undo stuffs are online.
SQL> select tablespace_name,status from dba_tablespaces;
TABLESPACE_NAME STATUS
SYSTEM ONLINE
UNDO ONLINE
SYSAUX ONLINE
TEMP ONLINE
LARGEDATA ONLINE
LARGEINDEXES ONLINE
MEDIUMDATA ONLINE
MEDIUMINDEXES ONLINE
SMALLDATA ONLINE
SMALLINDEXES ONLINE
XSMALLDATA ONLINE
TABLESPACE_NAME STATUS
XSMALLINDEXES ONLINE
XXSMALLTABS ONLINE
USERS ONLINE
CONVTABLES ONLINE
UNDO_02 ONLINE
16 rows selected.
SQL> SELECT tablespace_name, sum((bytes/1024)/1024) free FROM DBA_FREE_SPACE gr
oup by tablespace_name;
TABLESPACE_NAME FREE
LARGEDATA 18.3105469
SMALLDATA 10.46875
SYSAUX 106.5625
UNDO_02 67.125
XXSMALLTABS 13.0078125
CONVTABLES 170.039063
MEDIUMDATA 22
USERS 37.265625
SYSTEM 55.875
LARGEINDEXES 30.5175781
XSMALLINDEXES 17.34375
TABLESPACE_NAME FREE
UNDO 546.9375
MEDIUMINDEXES 33.25
SMALLINDEXES 31.015625
XSMALLDATA 23.6328125
15 rows selected.
SQL> select file#,status from v$datafile;
FILE# STATUS
1 SYSTEM
2 ONLINE
3 ONLINE
4 ONLINE
5 ONLINE
6 ONLINE
7 ONLINE
8 ONLINE
9 ONLINE
10 ONLINE
11 ONLINE
FILE# STATUS
12 ONLINE
13 ONLINE
14 ONLINE
15 ONLINE
15 rows selected.
SQL> select segment_name, tablespace_name, initial_extent,status
2 from dba_rollback_segs;
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
SYSTEM SYSTEM 102400
ONLINE
_SYSSMU1$ UNDO 131072
OFFLINE
_SYSSMU2$ UNDO 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU3$ UNDO 131072
OFFLINE
_SYSSMU4$ UNDO 131072
OFFLINE
_SYSSMU5$ UNDO 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU6$ UNDO 131072
OFFLINE
_SYSSMU7$ UNDO 131072
OFFLINE
_SYSSMU8$ UNDO 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU9$ UNDO 131072
OFFLINE
_SYSSMU10$ UNDO 131072
OFFLINE
_SYSSMU11$ UNDO_02 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU12$ UNDO_02 131072
OFFLINE
_SYSSMU13$ UNDO_02 131072
OFFLINE
_SYSSMU14$ UNDO_02 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU15$ UNDO_02 131072
OFFLINE
_SYSSMU16$ UNDO_02 131072
OFFLINE
_SYSSMU17$ UNDO_02 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU18$ UNDO_02 131072
OFFLINE
_SYSSMU19$ UNDO_02 131072
OFFLINE
_SYSSMU20$ UNDO_02 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU21$ UNDO_02 131072
OFFLINE
22 rows selected.How should I be bringing them online?
I tried this but didn't work for me.
SQL> alter rollback segment _SYSSMU1$ online;
alter rollback segment _SYSSMU1$ online
ERROR at line 1:
ORA-00911: invalid character
SQL> alter rollback segment '_SYSSMU1$' online;
alter rollback segment '_SYSSMU1$' online
ERROR at line 1:
ORA-02245: invalid ROLLBACK SEGMENT name
SQL> alter rollback segment _SYSSMU21$ online;
alter rollback segment _SYSSMU21$ online
ERROR at line 1:
ORA-00911: invalid character
SQL> alter rollback segment SYSSMU21$ online;
alter rollback segment SYSSMU21$ online
ERROR at line 1:
ORA-01534: rollback segment 'SYSSMU21$' doesn't exist
SQL> alter rollback segment '_SYSSMU21$' online;
alter rollback segment '_SYSSMU21$' online
ERROR at line 1:
ORA-02245: invalid ROLLBACK SEGMENT name
SQL> alter rollback segment "_SYSSMU21$" online;
alter rollback segment "_SYSSMU21$" online
ERROR at line 1:
ORA-30017: segment '_SYSSMU21$' is not supported in MANUAL Undo Management mode
SQL> ALTER SYSTEM SET UNDO_MANAGEMENT=AUTO SCOPE=SPFILE;
System altered.Should I be bringing every segment online separately? Please guide me.
Nith
Edited by: user645399 on Feb 23, 2011 2:52 PMSQL> select segment_name, tablespace_name, initial_extent,status
2 from dba_rollback_segs;
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
SYSTEM SYSTEM 102400
ONLINE
_SYSSMU1$ UNDO 131072
ONLINE
_SYSSMU2$ UNDO 131072
ONLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU3$ UNDO 131072
ONLINE
_SYSSMU4$ UNDO 131072
ONLINE
_SYSSMU5$ UNDO 131072
ONLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU6$ UNDO 131072
ONLINE
_SYSSMU7$ UNDO 131072
ONLINE
_SYSSMU8$ UNDO 131072
ONLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU9$ UNDO 131072
ONLINE
_SYSSMU10$ UNDO 131072
ONLINE
_SYSSMU11$ UNDO_02 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU12$ UNDO_02 131072
OFFLINE
_SYSSMU13$ UNDO_02 131072
OFFLINE
_SYSSMU14$ UNDO_02 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU15$ UNDO_02 131072
OFFLINE
_SYSSMU16$ UNDO_02 131072
OFFLINE
_SYSSMU17$ UNDO_02 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU18$ UNDO_02 131072
OFFLINE
_SYSSMU19$ UNDO_02 131072
OFFLINE
_SYSSMU20$ UNDO_02 131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU21$ UNDO_02 131072
OFFLINEStill undo_02's segments are offline.
Maybe you are looking for
-
Itunes application store bill to your phone bill
When buying applications off the app store, is it possible to get billed to your phone bill instead of visa. So that what ever u got over the month will appear on your phone bill.
-
Write again sub-header and header for every start of new page in report
Hello experts, In my report, I declared my line-count to be 0. I don't know if this is correct but what I want to do is that for every new page, I want to write again my sub-header and header. How do I do this? Thanks again guys!
-
Can I use a song from iPhoto in iMovie?
I am having trouble. I want to know if I can use the song Dateline in iPhoto on iPad in iMovie. Is there away. I am making a movie and its due on Friday. HELP!!!
-
TS3988 unable to sign into icloud account
Help. I am unable to sign into Icloud account. Am able to access other services. I am also unable to access my email account through my Galaxy note 2
-
Hp Envy states second battery not present
My second battery states not present. Please help me to solve this issue. I love this compuuter. And my warranty have already expired.