Sleek xfers like IPOD when using multi pc

does the sleek xfer files like the ipod... as in, if you sync with PC # and then sync with your laptop or PC #2, do you have to delete your playlist and music thats playable (not using as a flash dri've option)? Or is the Sleek like the Neeon, whereas you can sync the player on multiple computers w.o deleting your playlist... I like to travel between my home pc and my dorm laptop.
Thanks

It depends on what software you use I would imagine.
Assuming the MTP version of the Sleek, I understand with WMP it syncs both playlists from WMP and the content. I'm not sure if the playlists are a one way sync.
There is of course other software like Creative's MediaSource (and maybe other software that Creative ship with it).

Similar Messages

Can i listen to the track name and artist in my iphone like ipod shuffle using voiceover kit?

Hello People,
My question is, can i listen to artist and track name on my iphone 4s like Ipod shuffle using voiceover kit?
Thank You.

I have an Alpine radio with an iPod dock adapter to let me control my iPod through my head unit. This had worked great with my Nano, but I heard that these adapters didn't work well with the iPhones. Mostly due to interference / feedback from the phone being heard through the speakers.
However, I was suprised at the compatiblity mine had with the iPhone, especially being that it is a couple years old (the apadpter). When you plug the iPhone in it says that the device may not be compatible with the iPhone and that you should put the phone in "airplane mode." I just kept my nano plugged in as I thought that I didn't want the equivalent of turning my phone OFF when driving, so one day I tapped NO. Well, to my suprise, I did not hear any feedback or interference through my stereo. And, In fact, While I was driving, I received a call and the music stopped and the phone rang!
So, your mileage may vary on whichever brand adapter you use, but I have found that it works just fine for me. Hope this helps.

When using multi select in some utilities error RME-00011 occurs

When using multi-select in some utilities of headstart
eg. Enforce CDM Ordering Standard for Colums
RME-000011 error occurs:
RME-00011: Operation 'upd' on COLUMN has failed
Activity aborted with API errors.
Does someone know what went wrong?
regards,
marcel

Marcel,
Could you please let me know what utility causes this erroneous behaviour? Is it possible to give a reproduceable description? I'm not aware of this problem. If you can force the failure again, is it possible to include the last part of the debug detailed log (set message level for user at 'debug detailed') in this thread?
Kind regards,
Marc Vahsen
Headstart Team

Shock like feeling when using my iPhone?

Shock like feeling when talking on iPhone 5, anyone else notice this? my daughter also noticed this when talking on phone??

Burning from heat or electricity? If heat, restore the device as new, i.e. not from your backup.

Macbook Air 11'' (mid 2013) My display isn't running as smooth as it was before, especially when using multi-gesture commands

Hello, the major issue is that when I use a multi-gesture command like 2 finger swipe to check out my notifications or when I use 4 finger swipe to switch between apps, the edges of the app or window kind of get cut. Ignore the ghost effect in the picture. That's just because of the camera. Anyway, so you see that some widgets and the window on the right are like cut. Also when I do 4 finger swipe up or down, the windows don't move smooth at all. It looks more like a horribly done stop motion movie. An other thing is that when I hover over the dock, the magnifying effect vibrates for an instant before it fully magnifies and also when I'm hovering away it vibrates before it returns to its normal size. Also when I move the cursor quickly from one side to an other within the dock, sometimes the dock also gets cut. I started to notice these issues a little while after the update for issues with WiFi and Photoshop, maybe it has something to do with that. Any help is welcome.

Reset PRAM. http://support.apple.com/kb/PH4405
If this does not help, contact Apple.
Best.

Display Blank Tablix when using multi value parameter in SSRS 2008 R2

I have a main report which contains tablix1 and tablix2. Tablix1 is using DataSet1 and Tablix2 is using DataSet2. I have a multi value parameter set up with 71 items to choose from. My company owns 71 convenience stores and what I am doing is comparing sales
for a hard coded date in DataSet1 versus a hard coded date in DataSet2, sales for the same date 1 year ago. Pretty simple, works great when both datasets return data. However, we have a store that we opened up about 4 months ago. The data is displayed
in Tablix1, but since the store did not exist 1 year ago, there is no data for Tablix2. I have tried the "No Row Message" and Repeating Column and Row Headers, etc. When I choose all stores that existed last year, the report runs great. When I choose
a store that existed last year and our new store (#39) that did not, the report messes up. The below image, you can see Tablix1 is good, but Tablix2 should be blank and only show the column headers. Instead it moved Store #40's Tablix1 beside it. If I
run the report and just select store #39, Tablix1 runs as it should and Tablix2 shows The column headers and a blank row. It disappears as soon as I select multiple values.
When you click the next page button, you will see Store 40's Tablix2 where it's Tablix1 should be and then a blank space where Tablix2 should be.

Hi BassMan75,
According to your description, there is a main report with subreport, since the store did not exist one year ago, there is no data for the subreport. You want to show tablix grid even through there is no data in subreport, right?
Report data comes from datasets, if there is no corresponding value in the dataset, only column headers will be displayed in the report, we could not set the rows to blank, so we can’t achieve your goal directly. As a workaround, we can put one text box
in the report with the message: No data for the store. In this way, if there is no data meets search condition, the message will be displayed in the report. Please refer to the following steps:
Click and select the tablix.
In Properties window, in No Rows section, in NoRowsMessage text box, type No data for the store.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

What files can go on IPod when used as External Disk?

I have done appropriate research, and I know how to use IPod 60GB Video to store and download data files, but I am unable to find out what file types it will accept. Are there any exceptions?
I ask this because I just learned that "Notes" will only accept .txt files and not Microsoft Word document file types.
For example, can I drag PDF files into it? Would I even be able to see them on display?
Thanks!!!!

The reason notes only accept txt files is because they can be read on the ipod, and you can save a .txt file out of microsoft word by the way. When you use the ipod as external Disk, that's exactly what that is, an external disk, and you cannot see those files on the ipod. All you can do with external disk is store files (any kind) and move them to another computer.

Error -10007 when using multi PXI6115

I'm getting "error -10007 occured at setup conditional retrieval".
I am running two programs simultaneously using the example program "acquire N Scans analog software trig.VI" in order to trigger DAQ#1 & DAQ#2 at various times. When I run both programs it acts fine until I get DAQ#1 to trigger and then I receive the error.
Any help would be appricated.

Hello:
Error -10007 occurred means that a channel, port, or counter is out of range for the device type or device configuration; or the combination of channels is not allowed; or the scan order must be reversed (0 last).
So, it looks like you have an invalid channel selected. Try both examples with only CH0 selected as element 0 of the Channels array. Make sure that all other elements of the Channels array are greyed out (disabled)... Can you run each example on each device idividually without any problems?
Let me know if you are still having issues...
Sincerely,
Brooks B
Applications Engineer
National Instruments

Frozen iPod when using Pioneer Car Kit

Up till tonight, my ipod has always worked fine with my cars Pioneer headunit and ipod connect equipment but its now decided to freeze and won't let me do anything. The screen has completely locked and I've tried doing the restart procedure but nothing happens. It is less than a year old and so wouldn't have thought that would be a problem. When it's plugged into my car, it comes up saying an error on the headunit screen, when I plug it into my computer, nothing on ipod happens, doesn't recognise anything being connected, and the screen has just stayed the same with the Pioneer logo. Any thoughts?

i hv a new '10 jeep commander w/ uconnect and hv the iphone/ipod connector factory installed in the glove box. all worked great before i put the ios4 update on my 3gs. before the update all my ipod stuff on the phone was all on my touch screen. now gone:( will only play the last song that was on when i used the ipod part of the iphone and i get the message this doesn't work w/ iphone, instead of the airplane mode message that has appeared when i plugged in forever.
hope there is others w/ this. apple better get an update for the update.

Playlists aren't showing under the music tab on my ipod when using Itunes.

So I bought a new Ipod Nano the other day and I wanted to create folders and playlists manually so I can organise things to the way I like them.
But every time I click 'new playlist/folder' it appears under the device tab instead of the music tab like it had done before.
I have my settings set to manual and I don't want to sync things over because when I do that, it wont let me organise playlists or folders.
So can someone tell me how I can fix this and what I am doing wron?. Or if this is just an annoying new feature of the new itunes?

I have this problem too. When i remove all my music, I am able to click on the music tab without a problem. This leads me to believe that iTunes isn't able to handle all my music? My laptop is fairly new, with an i7 processor and 8gb ram, so the computer is definitely not the problem. Any ideas? Were you able to fix it yet?

Dead ipod when using 2nd laptop to charge

1. Using the USB port on my laptop (Dell Latitude 420) to charge my 5G 80GM ipod has worked fine for the past 30 days since new.
2. Switched to my wife's Dell Inspiron 5150 to charge it and now it's dead. I started out with the flashing white screen every 5-7 seconds and then absolutely nothing.
3. I reconnected to my laptop and its still dead. iTunes does not recognize that the ipod is connected.
I have considered:
A. 5Rs, but don't think this is an option given that the ipod must be charged first and all indications are that it is not charging.
B. The toggle of the Hold button followed by the menu/select button exercise.
C. Ran the diagnostics in iTunes - redlight/failure in the iTunes box.
Any help appreciated.

Have you left it pluged in for an hour, I'd hate to say it but you may need to send it off to get it fixed.

Messed up photos on ipod when using vista

i have a 5thGen ipod and my sister has a new nano. we both had our own librarys with our own photos on them from our own laptops. however we recently got a new pc with vista. because it had a large harddrive on it we decided to merge or libiarys together on this pc and update our ipods on it. the photos for my ipod are from a number of different cameras which are organised using an adobe photoshop album. my sisters are all from the same camera and are stored stored in the myphotos folder in windows. the photos on both used to display fine using xp but now most of the photos are messed up on both my 5thgen and my sister nano. usually the colours are messed up but some display black or white screens, some are upside down and some cut off setions of the image. the images are also being displayed in a very random order. before it was date order on mine and file name on my sisters.

If you weren't so lazy you would have done a search here and found the blurred photo problem is in several posts and no solution was found.
You can tell I'm being sarcastic here.
Have you upgraded to version 7.2 and tried resyncing your photos?

How mute a Single Midi track instead of all when using multi-timbral instrument

I added a Multi-Timbral Instument, opens up 16 midi channels. When i want to mute/solo just one of those 16 midi tracks, all of them are muted/solo-ed. How to mute/solo them individually?

If you have only one single mono audio track then duplicate it (select audio track then hold down SHIFT and OPTION/ALT key simultaneously and drag the mono audio clip down to the audio track below, it will give you a duplicate) after doing that select and double click the duplicated mono track and in the viewer Pan that hard right (1). Finally select both audio tracks and hit Option+L. You now have stereo pair.

Is there a way to keep all the music on my ipod when using a new computer

i want to keep all my music but when i go to sync my ipod to my new computer itunes says it will erase all my music. I dont want to lose 600 songs

Try this way:
Make sure your new computer is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
Saving data to a computer before setting it up again is also explained here: How to back up your data and set up as a new device

I can't move tv show to ipod when used as external drive

I have been putting itunes purchased tv shows on my 60g ipod as a hard drive untill it stopped working. I drag the show to the ipod icon on the desktop and the plus sign appears then nothing happens. I have 28g free and it's worked fine untill now. I'm just doing this temporarily untill i get a new hard drive for my computer. I only have 13g now. So if I want to buy anything else I have to free up the space and I know that if I just put it on my ipod as a watchable video I can't move it back.
G3 b&w Mac OS X (10.4.7)

Does this video play in iTunes? How is your iPod configured to sync videos from under its Movies configuration tab in iTunes?
See this article for more information on syncing videos.
http://support.apple.com/kb/ht1333
B-rock

Sleek xfers like IPOD when using multi pc

Similar Messages

Maybe you are looking for