Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds.
When i select Sleep or Hibernate in Windows 8.1 with lid open, it just behaves like a Restart command.
Need this fixed! Any ideas?

Try downgrading to your older BIOS and see if it works again.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

Tecra A2: display brightness Fn F6+F7 does not work after BIOS update

Updated bios to 1.40 WIN at end of January. Since then F6 & F7 keys fail to increase or decrease screen brightness. Is this a coincidence or is the bios update the culprit!!??

Hi
Usually the BIOS update shouldn't have any bad influence on the Toshiba drivers and the OS performance.
There must be another reason for the FN key malfunction.
At first I would suggest to reinstall the common modules. Please check if it will help.

System sleep and shut down not working after upgrade to windows 10

HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone suggest, what to do ?

Hi there , Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature. Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them. 1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try. 1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook. Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter. I hope this helps! Have a great day!

Windows 10 - No sound and mediaplayer does not work after upgrade

Hi !I can't get the sound to work after upgrade to win 10, - and windows mediaplayer will not openmp3's -- I get video on the VLC - but no sound... If anybody can help me, - please post a direct link to the driver I have toreinstall.. Thanks CarstenNorway

Thanks for the answer- but I mangage to solve the problem my self this time... I just did go to controlpanel - and clicked right button on the mouse - and updated both sound drivers thatI did find in there. After restart of the lap - everything worked ut well.. I am supprized !! Carsten

Keyboard and Mousepad does not work after installing windows support software.

I was able to successfully install windows 8.1 64bit on an late 2012 iMac. I went through the installation just fine with the mousepad and keyboard. I went into the desktop and open up the files and went to computer to download the windows support software. After it was done installing the windows support software, my mouse and my keyboard stopped working completely. I couldn't even click "finish" on the download. I turned the computer off by pressing the power button, then turned it back on. I held the option key and the Macintosh HD and Windows showed up. I turned the mousepad and keyboard back on and it was working again. So I clicked on Windows and as I enter the startup screen, the mouse and keyboard stopped working again.
Computer: iMac 21.5 in. late 2012
Used Windows 8.1 Pro 64bit
The keyboard and mousepad that I have is bluetooth.

Hi,
Have you checked it from Sounds yet. Please
Right click the speaker icon
Select Recording devices
You should see a "tick", otherwise Right click it and enable it.
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT1192 caps lock function does not work after latest update

Hi there,
I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
At present if i hold or press the button, it is failing to light up or function at all.
Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
Your thoughts and opinions would be much appreciated,
Thanks,
Robsterhill101

My Macbook Pro Early 2011 15" (base model) did this to me last night.
I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
SHOULDA BOUGHT THE APPLE CARE
Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM

Lenovo G780 not working after BIOS update

First of all I want to say that I am extremely disappointed with the experience I had with my Lenovo. After I bought it I found out that Lenovo, for some reason, disabled the Turbo Boost option of the CPU. I tried to fix it by entering the BIOS but the options there were limited, so I decided to update the BIOS. I downloaded the BIOS update for 64-bit windows(i am running windows 8 which is compatible with the said update utillity). I ran the .exe and followed all the instructions (did not shut-down restart or anything my computer). After installing it automatically restarted and a Lenovo logo prompted on the screen followed by ">>Start PXE over IPv6, Press [ESC] to EXIT..." after that "EFI Network 0 for IPv6(numbers and letters) boot failed". Then ">>Start PXE over IPv4" which failed and a blue box poped saying
"Default Boot Device Missing or Boot Failed. Insert Recovery Media and Hit any ket then select boot manager to choose a new boot device or to boot recovery media". Pressed ok and got me to Boot Manager screen. Boot option Menu had only EFI Network 0 for IPv6 and EFI Network 0 for IPv4". What should I do?
Note that I tried to start up both with and without the ethernet cable in.

Hi.
I also (stupidly) updated to this new BIOS version and ran into the problems you described. I did what Lenovo recommended but nothing worked. But this how I solved my problem:
Enter the BIOS by pressing F2 just after booting up the computer.
When inside BIOS go to Boot and chang the following settings: Boot Mode [Legacy Support] AND Boot Priority [Legacy first].
Save and Exit and your computer should start.
Whence inside check if windows is activitated and check if the new BIOS is registered.
PS: I have scandivian G780 with an i3. Pls responds if this helps

Equium A60 does not start after BIOS update

I have an Equium A60. After being caught with some very nasty malware and a trojan I made the disiccion to reformat the machine and reinstall the o.s..
All went well until I updated the bios. Machine crashed and now I cannot get it to reboot. Press the power button and the machine will start for 3-4 seconds and then shuts down.
I know this is due to the bios and want to know if there is any way that i can reset this back to it original settings?
thanks in advance for your help

Hi Rob.
The model of my laptop is EA60-152 / PSA67E.
Yes i did upgrade from the Toshiba website.
I should have never done this it was working after the reinstall of the o.s and so i should not have tried anything else(never fix something that aint broke).
The only place i have found for a new motherboard is Toshiba. But the price is nasty. Talk about what a fool am i.
Never mind though i keep on thinking that there may be an answer or a scrap one that i can rob a bios chip from. Other than that a very nice paperweight me thinks..!!!!
If i get an answer than i will post it here..

MacBook Pro Late 2011 Model - Does not work after Yosemite update

i recently updated my OS to Yosemite and had in problems for two days but yesterday it ceased to work in the middle of printing a document.
I need my laptop back up and running since I have school exams soon and vital information and files are in this laptop.
i Have never had a problem with the laptop before.
Issues that I have had
logging in takes at least 20 minutes
cannot progress further than that, desktop is blank and nothing loads, only the dock.
battery drains extremely fast
Safe boot does not even load
I've tried clearing that VRAM and the other one.
Cannot access anything at all
This is appalling and at the worst possible time.

Please describe exactly what you're doing and what happens.

Satellite Pro L100 does not run after BIOS update

Ok the machine is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during a BIOS update from the official Toshiba website. I downloaded the zip file, extracted it and activated the .exe file inside.
The window opened by the .exe was a BIOS flashing program, the .exe also simultaneously wrote a new BIOS file to a temporary folder.
When tried to use the program all I got was an error saying that it couldn't find the new BIOS to input.
I tried again only to get the same error. I then left the laptop for several minutes and when I returned, I found a blank unresponsive laptop.
By unresponsive I mean an obvious lack of BIOS functions i.e. power LED's not changing when plugging in of unplugging from the mains and the fact that I had to pull the battery out to turn the machine off. When the machine is turned on now all it does is check the drives and restarts (no display, no beeps)
What do I do?
The first thing that came to mind was to reset the BIOS.
One problem, I can't find the RTC battery or a jumper switch.

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

ThinkVantage Toolbox does not run after BIOS update

Lenovo ThinkVantage System Update Tool on my T410 ThinkPad (2518EWG) offered me download and installation of ThinkPad BIOS Update Utility US version 1.28-1.11.
Since then, whenever I try to run Lenovo ThinkVantage Toolbox I receive a message: „This version of Lenovo ThinkVantage Toolbox is not licensed to run on this system“.
I notice that the ThinkVantage Toolbox still shows the old BIOS No. 6IET49WW (1.09), while the updated BIOS is 6IET68WW (1.28).
Any comprehensible instruction how to solve the problem for a computer layman will be much appreciated. Thanks - Jan

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

Qosmio X305-708 - Solved: Media Buttons not working after BIOS update

I had this problem so I thought I would share in case anyone else encountered the same problem.
Basically after installing BIOS 1.70 (in Windows 7 64bit) on my Qosmio X305-708, the media buttons remains on partially, as in they were dim, and they didn't work at all. The light even remained on when the computer was off (strangely only when plugged in). To solve this problem I reinstalled the BIOS through a boot disk (USB key), since then its been fine. Must of been a corrupt install I suppose.

Hi mate,
Wow, thats really good work! :)
Im pretty sure that this would be interesting and very useful for other Qosmio X305-708 owner!!!

Headset does not work after latest update...

It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it at all and the walkman still plays on the phone speakers. Before the update I could listen to music, use it for making calls and so on. Since the update, nothing is working. My headset is working fibe by the way, so it is not a hardware fault. Works like a charm with other phones, and on the top of that if I use the app Soundabout the music works with the headset but the calls are still not using my headset. Do not tell me to use the sony headset which was in the package because I hate it. Has poor audio quality, falling out of my ears constantly and the cable is everything but not flexible. So it is a shame that I need to use an app to get my headset work on my new phone...

I understand you don't want to use the bundled headset, however for troubleshooting purposes can you please test it and let us know if it works.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My sound device does not work after yesterdays update

after the last update my sound device is out of system.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Silverlight and google chrome not working after system update

I just did a system update and now google chrome and the silverlight plugin do not work. I've tried uninstalling and reinstalling both numerous times, restarted, and checked for updates again but nothing works. What's going on?

Check compatibility with their respective vendors.

Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

Similar Messages

Maybe you are looking for