Sleep and UPS/Backup issues
I am rethinking my UPS backup requirement.
To me AVR (Automatic Voltage Regulation) may be way more important than software to shut down my iMac upon a power outage. Power outages are less frequent lately, but power fluctuations are still with me in my neighborhood, and probably were the reasons for a crashy iMac DVSE.
If my iMac DVSE and G5 are both in sleep and on the UPS, and the power goes out, I figure the power USEAGE will be small and the batteries will last pretty long - so no need for shut down. I guess I just need to know what the specs are for energy useage to calculate battery time.
Thoughts?
Yes. I always shut down and unplug my computers during a storm. I have had the plug of a surge protector get blown right out of the wall during a lightning strike before now. I'm not willing to take the risk.
Also, although I don't worry too much about my computers running out of juice if there's a power failure and I'm not around, I do wake them up and shut them down as soon as I get home if there's a power failure. You're right that it usually comes back on well before the battery runs down, but I don't want to take the chance of having an extended outage and forgetting about the computer till it's too late. Also, it takes a while to charge that battery back up again, and the computer won't run even with power if the battery is all the way down.
Similar Messages
-
My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night
Turn off Voice Control.
Otherwise, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). -
Sleep, Passwords, and Scheduled Backups
Okay, I have a question that I've yet to find an answer to (and I've looked high and low). I would think it would be a common issue, but perhaps not.
I downloaded Deja Vu a few days ago to schedule backups for my computer. Ideally I'd like them to run at like 5am when I'm not near my computer. So far so good. The problem is that I would like my computer passworded, and there lies the trouble.
Ideally it would be nice if I could set it to sleep for the night, go to bed, schedule it to wakeup at 4:59am, start Deja Vu at 5am, make the backup and go back to sleep. The problem with that is that I originally had it set to ask for a password when coming out of sleep or a screen saver- when that's on and it comes on a scheduled wakeup, it prompts for password for 10-20 seconds, sees no password and goes back to sleep, bypassing my backup. Obviously that's not what I need.
I then thought, hey, that's fine, I guess I could just unpassword the sleep/screen saver functions and live with the need to lock my screen every time I'm away (I have it set up to lock my screen in a couple of keystrokes, so that's not that big of a deal). But then I realized that even if I did that, it would come back from sleep, perform the backup, head back to sleep, but at that point anyone could just come by, wake it back up from sleep and not need a password, because the screen doesn't get locked after the backup is made.
So here's the endpoint: I would like to keep my iMac secure throughout the day by requiring a password to use it, but on the same token I need it to be able to wake up from sleep in order to perform the backup.
I was thinking about never setting it to go to sleep and just locking my screen at night (with my monitor automatically turning off after X minutes), but I'm worried about keeping it on for a more than necessary amount of time- I figure that if I set it to sleep during the night it might theoretically prolong its life- can anyone comment on that? (I'm a recent OS X convert, so I'm still learning some things- and yes, I completely love OS X now!)
Thanks a lot for any insight you could provide.
Mac OS X (10.4.3)Welcome to the Apple community:
You certainly don't need to worry about shortening your computer's life by leaving it on 24/7. I have my monitor set to sleep after a few minutes, but the computer never sleeps. One of the things that OS X does is run cron tasks (housekeeping, cleaning logs, caches and various mundane tasks) sometime early in the morning when you are unlikely to be using the computer. I think the latest iteration of 10.3 runs these at other times of the days, but the main thing is, don't fret about leaving your computer on, they are built to do this and you will save yourself a lot of fiddling about and accomplish what you want to do by simply leaving it on.
Miriam -
I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
Using 2 displays, connected via HDMI and thunderbolt
Been on to support a number of times now - is anyone experiencing the same issues?BUMP.
I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
kernel[0]: Previous Shutdown Cause: -128
I don't know if that's related or not, but maybe helps? -
I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?
Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html -
Toshiba USB Sleep and Charge causes s3 wake issues
Toshiba Satellite P500-ST6844
PSPGSU-0Q2012
Windows 7 Ultimate SP1 x64
I have posted before about an issue with my laptop not waking from sleep properly, (see here)
basically my problem is this:
I put the laptop to sleep and everything appears to go normally. but when i go to wake the system up, the Toshiba boot logo is shown, and i have lost my windows session. the system acts like it is cold booting, except for a 30 second pause following the boot logo. Just to be clear, once my windows is up and running again my session is not restored, so my system has not gone into hibernation. this issue does not affect hibernation mode. Hibernation mode works perfectly. Only taking out the battery and unplugging the machine and then pressing the power button for 30 secs. seems to alleviate the issue. but the issue always seemed to return. after much trial and error, I have narrowed down the cause of the issue. if the Toshiba USB Sleep and charge feature is used, the sleep problem is triggered, even if the sleep and charge port is not being used. This issue occurs even in a clean state (clean from a factory restore using restore media). this sleep issue has been occurring since i bought the laptop in 2010, but it has been only in the last 2-3 months that i have been able to narrow down the exact trigger for the issue.
I have updated to the latest version of the sleep and charge app for my laptop, but this does not seem to help any. the issue does not seem to be triggered by just activating or deactivating the USB sleep and charge feature in bios, but using/configuring the sleep and charge feature using the Toshiba application in windows, does.
I don't know if this is indicative of a bios, software, utility, hardware, or power supply issue. I am hoping some one here might have an answer for me, or at least point me in the right direction on where i can go from here.this behavior even occurs in a "factory fresh state" - (restored from OS recovery media). In that state, only toshiba stuff is installed..
Sounds like you found a bug.
-Jerry -
i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.
You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.
-
10.5.3 Sleep and shutdown issues
I'm truly confused about the current issues I'm dealing with since my choice to upgrade to 10.5.3...
Since I upgraded, everything seemed to be fine until I closed my macbook and moved it into another room just to open it again. What happened? Nothing! That's the problem! The normally pulsing LED on the release button now stares at me with a constant, unchanging glow. I tried to open it and nothing happens! I was forced to hard boot my machine by holding down the power button only to be stuck with a lengthy boot back into the OS. Once I FINALLY got back to my desktop, I was able to hold option-apple-eject to put the macbook into sleep mode. The LED pulsed once again! I thought my troubles were over! Unfortunately, I was wrong. I figured it might be a good idea to cleanly shut down the machine and reboot it to reset the environment. My macbook never shutdown completely! It sat still with a black screen appearing to be off with the LED again.. Constantly glowing, unchanged... no pulsing... I let the machine sit there and do it's thing for several minutes and it never shut down... I was forced to hold the power button down to shut it off once again. Once the desktop arrived, I then tried again to do the apple-option-eject to place it into sleep and it gave me the unchanging, staring glow... Hard boot? AGAIN? What's going on here?
The most confusing part of this situation is it repeated the same symptoms after reinstalling the operating system from a complete erase and install. The only update I performed was the 10.5.3 combined upgrade after installing bare-bones Leopard from the installation DVD.
My kingdom for the ability to install 10.5.2 again! I've never had these issues before and I'm beginning to lose the faith I once had in the stability of this amazing operating system.I've had the problem where my MBP doesn't wake up from sleep when I closed it recently. I think the problem is that when you close it, it writes all the information to the hard drive so that it can "hibernate". I've found (especially if I have a lot of things open) that if I open it too soon after closing, the best thing to do is close the lid until the light goes from solid to pulsing. This lets you know that the computer is actually asleep. After that, it should be ok to open the lid.
-
Sleep and Shutdown issues after upgrading to Windows 10
Hi there,So I'm having issues with sleep and shutdown after I upgraded to Windows 10, the laptop won't go to sleep or shutdown properly. The screen turns off, but the power LED stays on and the fan as well. If I chose sleep it won't wake up no matter what I try, and I'd have to perform a hard shutdown everytime.Any solution for this problem?Thanks.
**I have posted this in another area with the same issue** YES!!!!! A Solution that worked. Spread the news. It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue. 1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS. If you have not done this before, proceed at your own risk. You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled. My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS. The Computer will restart and from that point on Shut Down, Sleep, etc. has worked. WOW this was a frustrating issue. Almost went back to Windos 8. I take no credit for this solution, I pieced it together from other posts on this issue. Hope this helps.
-
990FXA-GD80 sleep and post-sleep issues
Hi,
I've recently upgraded to an MSI 990FXA-GD80 motherboard paired with an AMD 8320 Black Edition CPU. My previous set-up was with an MSI 790FX-GD70 and AMD Phenom II X4 955 BlackEdition. I also put in a new PSU (see below).
Full spec
Board: MSI 990FXA-GD80
Bios: Version 13.1
VGA: Asus DirectCU II TOP Radeon HD 7970
PSU: Seasonic X-Series 650W (54A 12V rail)
CPU: AMD FX 8320 Black Edition 8 Core Processor Socket AM3+
MEM: 8GB Mushkin DDR3 PC3-12800 Redline Ridgeback (7-9-8-24) Dual Channel kit (2x4GB)
Boot HDD: Corsair P128 128GB 2.5" SATA-II SSD
Storage HDD: 1TB Samsung HD103UJ Spinpoint F1
COOLER: Noctua NH-C12P
OC: None
OS: Windows 7 64bit Home
Rather than do a complete reinstall, I simply removed all of the old drivers that I could, replaced the hardware, and let windows do its thing with the updates. Then ran LiveUpdate and cleaned up any further remnant drivers I could find. Everything seemed to work fine.
The RAM is running at auto frequency, timings and voltage - I know this is under its rated values, but I wanted to make sure everything was in good shape before mucking about with OC settings.
I'm having a few minor issues though.
When the board goes in to sleep mode after being left alone for a while, it can only be woken by hitting the power switch. After a search of these forums, I see that can be altered in the BIOS - no problem.
Once the board wakes from sleep, however, performance is extemely sluggish. Load times for games more than double, and frame rates drop to about 30-40% of where they were before.
Rebooting fixes this, but I really shouldn't have to be doing that every time the board goes to sleep.
Would updating the BIOS help with these issues (I've read a few negative comments about v 13.1)? If so, which version?
Are there some power management, or other settings, in the BIOS that are causing the RAM or CPU to only partially wake up?
How can I stop the motherboard going in to sleep mode at all? I'm pretty sure I found a BIOS setting to do this on my last board, but am missing it on this one.
Any ideas?
Thanks (in advance).Yea..I've seen a lot of odd stuff. I don't blame MSI, I think it's a combination of the newer UEFI BIOS, all the green power stuff, and BIOS changes to make Windows 8 compatible. Every motherboard seems to have it's quirks these days.
You are basically doing what I do now. My computer is set to never sleep, and monitors off in 15. I normally turn my computer off manually when I'm done with it, unless I'm downloading from Steam or something...then I want it to keep running. So this "work around" has me happy.
I hear you on the clean install. It's such a pain in the butt getting all my software back in order. I literally spend a week just getting all my games downloaded from Steam, lol. I'm riding the AM3 platform until I absolutely no longer can.
The good news, our CPUs, while never being as fast as their Intel counterparts clock for clock will get faster over time as the software industry get's more and more in line with multi-core programs. Just keep feeding them new vidoe cards. -
RMAN BACKUPS AND ARCHIVED LOG ISSUES
제품 : RMAN
작성날짜 : 2004-02-17
RMAN BACKUPS AND ARCHIVED LOG ISSUES
=====================================
Scenario #1:
1)RMAN이 모든 archived log들을 삭제할 때 실패하는 경우.
database는 두 개의 archive destination에 archive file을 생성한다.
다음과 같은 스크립트를 수행하여 백업후에 archived redo logfile을 삭제한다.
run {
allocate channel c1 type 'sbt_tape';
backup database;
backup archivelog all delete input;
Archived redo logfile 삭제 유무를 확인하기 위해 CROSSCHECK 수행시 다음과
같은 메시지가 발생함.
RMAN> change archivelog all crosscheck;
RMAN-03022: compiling command: change
RMAN-06158: validation succeeded for archived log
RMAN-08514: archivelog filename=
/oracle/arch/dest2/arcr_1_964.arc recid=19 stamp=368726072
2) 원인분석
이 문제는 에러가 아니다. RMAN은 여러 개의 arhive directory중 하나의
directoy안에 있는 archived file들만 삭제한다. 그래서 나머지 directory안의
archived log file들은 삭제되지 않고 남게 되는 것이다.
3) 해결책
RMAN이 강제로 모든 directory안의 archived log file들을 삭제하게 하기 위해서는
여러 개의 채널을 할당하여 각 채널이 각 archive destination안의 archived file을
백업하고 삭제하도록 해야 한다.
이것은 아래와 같이 구현될 수 있다.
run {
allocate channel t1 type 'sbt_tape';
allocate channel t2 type 'sbt_tape';
backup
archivelog like '/oracle/arch/dest1/%' channel t1 delete input
archivelog like '/oracle/arch/dest2/%' channel t2 delete input;
Scenario #2:
1)RMAN이 archived log를 찾을 수 없어 백업이 실패하는 경우.
이 시나리오에서 database를 incremental backup한다고 가정한다.
이 경우 RMAN은 recover시 archived redo log대신에 incremental backup을 사용할
수 있기 때문에 백업 후 모든 archived redo log를 삭제하기 위해 OS utility를 사용한다.
그러나 다음 번 backup시 다음과 같은 Error를 만나게 된다.
RMAN-6089: archive log NAME not found or out of sync with catalog
2) 원인분석
이 문제는 OS 명령을 사용하여 archived log를 삭제하였을 경우 발생한다. 이때 RMAN은
archived log가 삭제되었다는 것을 알지 못한다. RMAN-6089는 RMAN이 OS 명령에 의해
삭제된 archived log가 여전히 존재하다고 생각하고 백업하려고 시도하였을 때 발생하게 된다.
3) 해결책
가장 쉬운 해결책은 archived log를 백업할 때 DELETE INPUT option을 사용하는 것이다.
예를 들면
run {
allocate channel c1 type 'sbt_tape';
backup archivelog all delete input;
두 번째로 가장 쉬운 해결책은 OS utility를 사용하여 archived log를 삭제한 후에
다음과 같은 명령어를 RMAN prompt상에서 수행하는 것이다.
RMAN>allocate channel for maintenance type disk;
RMAN>change archivelog all crosscheck;
Oracle 8.0:
RMAN> change archivelog '/disk/path/archivelog_name' validate;
Oracle 8i:
RMAN> change archivelog all crosscheck ;
Oracle 9i:
RMAN> crosscheck archivelog all ;
catalog의 COMPATIBLE 파라미터가 8.1.5이하로 설정되어 있으면 RMAN은 찾을 수 없는
모든 archived log의 status를 "DELETED" 로 셋팅한다. 만약에 COMPATIBLE이 8.1.6이상으로
설정되어 있으면 RMAN은 Repository에서 record를 삭제한다.Very strange, I issue following command in RMAN on both primary and standby machine, but it they don't delete the 1_55_758646076.dbf, I find in v$archived_log, this "/home/oracle/app/oracle/dataguard/1_55_758646076.dbf" had already been applied.
RMAN> connect target /
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
old RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
new RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
new RMAN configuration parameters are successfully stored
RMAN>
---------------------------------------------------------------------------------- -
Battery, Power, Deep Sleep and Spotlight problems after 10.9.4 update
Hi, I have a Macbook Pro 8,1 13in (Late 2011). I updated to the latest version of Mavericks (10.9.4) and iTunes on Sunday, right after that my macbook started to goes into Deep Sleep after closing the lid, even when the battery was 80% of charge. My battery normally lasts for almost 5 hours. After it went to deep sleep, the power bottom does not respond. Also, I have noticed that spotlight process in Monitor was consuming so huge amount of resources. This problem persists in Boot Camp. There is no way to turn the machine up without plugging it to the power cord. Sometimes it charges the battery as usual, sometimes it does not recognize the battery. Suddenly, the mac goes into sleep mode while I'm using it.
I have researching and troubleshooting in order to fix this but no solution. I have reset the PRAM and SMC. I made a backup of my files and installed Mavericks from the ground with external storage in order to erase the entire disk, no solution. I made an Internet Recovery and downgraded it to Lion, it worked for 2 hours and then I upgraded again to Mavericks (10.9.0) and the same problem came again, the upgraded to 10.9.4 and no solution at all.
I have searched on internet and there are other people experiencing this problem but nobody is able to bring a valid solution.
This is my battery's health:
Battery Information:
Model Information:
Serial Number: 9G1450LRJD3MA
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 3204
Fully Charged: No
Charging: Yes
Full Charge Capacity (mAh): 4859
Health Information:
Cycle Count: 931
Condition: Normal
Battery Installed: Yes
Amperage (mA): 2406
Voltage (mV): 12273
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x008d9c78
Charging: YesReseting the NVRAM/PRAM doesn't solve my problems.
Hi, since you have performed NVRAM /PRAM reset, try:
Intel-based Macs: Resetting the System Management Controller (SMC)
and if still issues persist, try: OS X: What is Safe Boot, Safe Mode?
Cheers -
IMac Model 2012 makes restart after sleep and after shutdown ?!
Hello Communities ,
my iMac Model 2012 i5 / 16 Gb RAM , does not go shut down ! it makes a restart , the same when it go to sleep ?
When i shut down , the iMac goes down .... then ca. 10 sek. after them it starts self again !!!!
What i have do :
- all power .pls in Library deletet
- PRAM reset
- SMC reset
- all USB device plug out
- a new Admin account
- check filesystem
- start up in safe mode
here .log file .... can anyone help me ?
thx very much .... roger
{\rtf1\ansi\ansicpg1252\cocoartf1187\cocoasubrtf390
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\paperw11900\paperh16840\margl1440\margr1440\vieww38300\viewh24840\viewkind0
\pard\tx566\tx1133\tx1700\tx2267\tx2834\tx3401\tx3968\tx4535\tx5102\tx5669\tx623 6\tx6803\pardirnatural
\f0\fs24 \cf0 14.07.13 17:27:49.000 syslogd[299]: --- syslogd restarted ---\
14.07.13 17:27:49.444 com.apple.launchd[1]: (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds\
14.07.13 17:27:49.459 com.apple.launchd[1]: (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds\
14.07.13 17:27:49.545 com.apple.launchd[1]: (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds\
14.07.13 17:28:26.000 bootlog[0]: BOOT_TIME 1373815706 0\
14.07.13 17:28:45.000 kernel[0]: PMAP: PCID enabled\
14.07.13 17:28:45.000 kernel[0]: PMAP: Supervisor Mode Execute Protection enabled\
14.07.13 17:28:45.000 kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64\
14.07.13 17:28:45.000 kernel[0]: vm_page_bootstrap: 3877659 free pages and 283877 wired pages\
14.07.13 17:28:45.000 kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]\
14.07.13 17:28:45.000 kernel[0]: zone leak detection enabled\
14.07.13 17:28:45.000 kernel[0]: standard timeslicing quantum is 10000 us\
14.07.13 17:28:45.000 kernel[0]: standard background quantum is 2500 us\
14.07.13 17:28:45.000 kernel[0]: mig_table_max_displ = 74\
14.07.13 17:28:45.000 kernel[0]: TSC Deadline Timer supported and enabled\
14.07.13 17:28:45.000 kernel[0]: corecrypto kext started!\
14.07.13 17:28:45.000 kernel[0]: Running kernel space in FIPS MODE\
14.07.13 17:28:45.000 kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d\
14.07.13 17:28:45.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!\
14.07.13 17:28:45.000 kernel[0]: corecrypto.kext FIPS POST passed!\
14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled\
14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled\
14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled\
14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled\
14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled\
14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled\
14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled\
14.07.13 17:28:45.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled\
14.07.13 17:28:45.000 kernel[0]: calling mpo_policy_init for TMSafetyNet\
14.07.13 17:28:45.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)\
14.07.13 17:28:45.000 kernel[0]: calling mpo_policy_init for Sandbox\
14.07.13 17:28:45.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)\
14.07.13 17:28:45.000 kernel[0]: calling mpo_policy_init for Quarantine\
14.07.13 17:28:37.720 com.apple.launchd[1]: *** launchd[1] has started up. ***\
14.07.13 17:28:45.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)\
14.07.13 17:28:45.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993\
14.07.13 17:28:45.000 kernel[0]: The Regents of the University of California. All rights reserved.\
14.07.13 17:28:45.000 kernel[0]: MAC Framework successfully initialized\
14.07.13 17:28:45.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers\
14.07.13 17:28:45.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87\
14.07.13 17:28:45.000 kernel[0]: ACPI: System State [S0 S3 S4 S5]\
14.07.13 17:28:45.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 2344\
14.07.13 17:28:45.000 kernel[0]: AppleIntelCPUPowerManagement: (built 12:18:39 Oct 18 2012) initialization complete\
14.07.13 17:28:45.000 kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000\
14.07.13 17:28:45.000 kernel[0]: [ PCI configuration begin ]\
14.07.13 17:28:37.720 com.apple.launchd[1]: *** Shutdown logging is enabled. ***\
14.07.13 17:28:45.000 kernel[0]: Sleep failure code 0x00000000 0x1f006700\
14.07.13 17:28:45.000 kernel[0]: console relocated to 0xfc0020000\
14.07.13 17:28:44.816 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination\
14.07.13 17:28:45.000 kernel[0]: PCI configuration changed (bridge=17 device=4 cardbus=0)\
14.07.13 17:28:45.000 kernel[0]: [ PCI configuration end, bridges 13 devices 16 ]\
14.07.13 17:28:45.000 kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management\
14.07.13 17:28:45.000 kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled\
14.07.13 17:28:45.000 kernel[0]: AppleThunderboltNHIType2::start - SXFP method found\
14.07.13 17:28:45.000 kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]\
14.07.13 17:28:45.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused\
14.07.13 17:28:45.000 kernel[0]: rooting via boot-uuid from /chosen: FA41975F-8187-39BF-A050-6EA65F3EC755\
14.07.13 17:28:45.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>\
14.07.13 17:28:45.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start\
14.07.13 17:28:45.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start\
14.07.13 17:28:45.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded\
14.07.13 17:28:45.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded\
14.07.13 17:28:45.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready\
14.07.13 17:28:45.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD WDC WD10EALX-408EA0 Media/IOGUIDPartitionScheme/Customer@2\
14.07.13 17:28:45.000 kernel[0]: BSD root: disk0s2, major 1, minor 2\
14.07.13 17:28:45.000 kernel[0]: BTCOEXIST off \
14.07.13 17:28:45.000 kernel[0]: BRCM tunables:\
14.07.13 17:28:45.000 kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]\
14.07.13 17:28:45.000 kernel[0]: jnl: unknown-dev: replay_journal: from: 32392192 to: 41551360 (joffset 0x1d18000)\
14.07.13 17:28:45.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0\
14.07.13 17:28:45.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0\
14.07.13 17:28:45.000 kernel[0]: jnl: unknown-dev: journal replay done.\
14.07.13 17:28:45.000 kernel[0]: Kernel is LP64\
14.07.13 17:28:45.000 kernel[0]: hfs: Removed 19 orphaned / unlinked files and 136 directories \
14.07.13 17:28:48.000 kernel[0]: BCM5701Enet: Ethernet address 10:dd:b1:9f:be:37\
14.07.13 17:28:48.000 kernel[0]: AirPort_Brcm4331: Ethernet address 8c:2d:aa:57:1a:eb\
14.07.13 17:28:48.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification\
14.07.13 17:28:48.000 kernel[0]: IO80211Interface::efiNVRAMPublished(): \
14.07.13 17:28:50.614 hidd[49]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1\
14.07.13 17:28:50.698 hidd[49]: void __IOHIDLoadBundles(): Loaded 0 HID plugins\
14.07.13 17:28:51.022 fseventsd[50]: event logs in /.fseventsd out of sync with volume. destroying old logs. (679 25 725)\
14.07.13 17:28:51.658 fseventsd[50]: log dir: /.fseventsd getting new uuid: FBF6F1D0-FD4C-43AB-ACCA-A2A33EF85E41\
14.07.13 17:28:52.000 kernel[0]: macx_swapon SUCCESS\
14.07.13 17:28:57.000 kernel[0]: Waiting for DSMOS...\
14.07.13 17:28:58.508 appleeventsd[55]: main: Starting up\
14.07.13 17:28:58.509 com.apple.SecurityServer[19]: Session 100000 created\
14.07.13 17:28:58.708 coreservicesd[66]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false\
14.07.13 17:28:58.000 kernel[0]: IOBluetoothUSBDFU::probe\
14.07.13 17:28:58.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828B FirmwareVersion - 0x0032\
14.07.13 17:28:58.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed\
14.07.13 17:28:58.000 kernel[0]: NVDAStartup: Official\
14.07.13 17:28:58.000 kernel[0]: Previous Shutdown Cause: -128\
14.07.13 17:28:58.000 kernel[0]: NVDAGK100HAL loaded and registered\
14.07.13 17:28:58.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification \
14.07.13 17:28:58.000 kernel[0]: [IOBluetoothHCIController][start] -- completed\
14.07.13 17:28:58.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService\
14.07.13 17:28:58.000 kernel[0]: DSMOS has arrived\
14.07.13 17:28:59.058 mDNSResponder[41]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12\
14.07.13 17:28:59.231 airportd[70]: _processDLILEvent: en1 attached (down)\
14.07.13 17:28:59.000 kernel[0]: createVirtIf(): ifRole = 1\
14.07.13 17:28:59.000 kernel[0]: in func createVirtualInterface ifRole = 1\
14.07.13 17:28:59.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff804e998000\
14.07.13 17:28:59.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1\
14.07.13 17:28:59.000 kernel[0]: Created virtif 0xffffff804e998000 p2p0\
14.07.13 17:28:59.631 blued[58]: Read the UHE Info\
14.07.13 17:28:59.631 blued[58]: Read version 2 info. Number of devices:2\
14.07.13 17:28:59.631 blued[58]: Class of device: 0x2580\
14.07.13 17:28:59.631 blued[58]: Device name: 'Apple Magic Mouse' length:18\
14.07.13 17:28:59.631 blued[58]: Finished reading the HID data\
14.07.13 17:28:59.631 blued[58]: Found a device with PID:0x030d VID:0x05ac\
14.07.13 17:28:59.733 blued[58]: Class of device: 0x2540\
14.07.13 17:28:59.733 blued[58]: Device name: 'Apple Wireless Keyboard' length:24\
14.07.13 17:28:59.733 blued[58]: Finished reading the HID data\
14.07.13 17:28:59.733 blued[58]: Found a device with PID:0x0256 VID:0x05ac\
14.07.13 17:29:00.000 kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).\
14.07.13 17:29:00.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed\
14.07.13 17:29:00.389 com.apple.usbmuxd[29]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit\
14.07.13 17:29:00.521 configd[16]: network changed.\
14.07.13 17:29:01.770 com.apple.SecurityServer[19]: Entering service\
14.07.13 17:29:03.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,45e1,0000]\
14.07.13 17:29:03.106 configd[16]: network changed: v6(en0+:fe80::de0b:1aff:fea8:5393) DNS* Proxy+ SMB\
14.07.13 17:29:05.732 systemkeychain[76]: done file: /var/run/systemkeychaincheck.done\
14.07.13 17:29:05.801 configd[16]: network changed: v6(en0:fe80::de0b:1aff:fea8:5393) DNS* Proxy SMB\
14.07.13 17:29:06.157 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
14.07.13 17:29:06.165 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
14.07.13 17:29:06.343 mDNSResponder[41]: D2D_IPC: Loaded\
14.07.13 17:29:06.343 mDNSResponder[41]: D2DInitialize succeeded\
14.07.13 17:29:06.766 locationd[45]: NOTICE,Location icon should now be in state 0\
14.07.13 17:29:07.000 kernel[0]: [BNBMouseDevice::init][75.19] init is complete\
14.07.13 17:29:07.572 loginwindow[44]: Login Window Application Started\
14.07.13 17:29:07.000 kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1\
14.07.13 17:29:07.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered\
14.07.13 17:29:07.758 stackshot[32]: Timed out waiting for IOKit to finish matching.\
14.07.13 17:29:08.000 kernel[0]: [AppleMultitouchDevice::start] entered\
14.07.13 17:29:09.000 kernel[0]: USBF: 42.955 AppleUSBHubPort: Port 2 of Hub at 0x1d181000 about to terminate a busy device (CompositeDevice) after waiting 10 seconds\
14.07.13 17:29:10.349 netbiosd[74]: Unable to start NetBIOS name service: \
14.07.13 17:29:10.648 digest-service[101]: label: default\
14.07.13 17:29:10.649 digest-service[101]: dbname: od:/Local/Default\
14.07.13 17:29:10.649 digest-service[101]: mkey_file: /var/db/krb5kdc/m-key\
14.07.13 17:29:10.649 digest-service[101]: acl_file: /var/db/krb5kdc/kadmind.acl\
14.07.13 17:29:10.650 digest-service[101]: digest-request: uid=0\
14.07.13 17:29:11.794 awacsd[59]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)\
14.07.13 17:29:11.844 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store\
14.07.13 17:29:11.850 rpcsvchost[103]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded\
14.07.13 17:29:11.854 digest-service[101]: digest-request: init request\
14.07.13 17:29:11.914 digest-service[101]: digest-request: init return domain: BUILTIN server: LOCALHOST\
14.07.13 17:29:12.705 com.apple.kextd[12]: Can't load /System/Library/Extensions/LogitechUSBHIDevices.kext - no code for running kernel's architecture.\
14.07.13 17:29:12.706 com.apple.kextd[12]: Load com.Logitech.driver.HIDDevices failed; removing personalities from kernel.\
14.07.13 17:29:13.000 kernel[0]: X86PlatformPlugin::setRingTable - No ring table found!\
14.07.13 17:29:13.000 kernel[0]: X86PlatformPlugin::configResourceHandler - Failed to set ring table!\
14.07.13 17:29:13.000 kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice11a2\
14.07.13 17:29:14.724 mds[40]: (Normal) FMW: FMW 0 0\
14.07.13 17:29:14.790 WindowServer[95]: Server is starting up\
14.07.13 17:29:15.252 WindowServer[95]: Session 256 retained (2 references)\
14.07.13 17:29:15.252 WindowServer[95]: Session 256 released (1 references)\
14.07.13 17:29:16.052 WindowServer[95]: Session 256 retained (2 references)\
14.07.13 17:29:16.052 WindowServer[95]: init_page_flip: page flip mode is on\
14.07.13 17:29:16.166 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
14.07.13 17:29:16.838 WindowServer[95]: mux_initialize: Couldn't find any matches\
14.07.13 17:29:16.936 WindowServer[95]: GLCompositor enabled for tile size [256 x 256]\
14.07.13 17:29:16.936 WindowServer[95]: CGXGLInitMipMap: mip map mode is on\
14.07.13 17:29:17.032 WindowServer[95]: WSMachineUsesNewStyleMirroring: true\
14.07.13 17:29:17.033 WindowServer[95]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available\
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0\
UUID 0x000006100000b00500000000042c0140\
14.07.13 17:29:17.033 WindowServer[95]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available\
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0\
UUID 0xffffffffffffffffffffffff003f003e\
14.07.13 17:29:17.033 WindowServer[95]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available\
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0\
UUID 0xffffffffffffffffffffffff003f003d\
14.07.13 17:29:17.038 WindowServer[95]: Created shield window 0x5 for display 0x042c0140\
14.07.13 17:29:17.039 WindowServer[95]: Created shield window 0x6 for display 0x003f003e\
14.07.13 17:29:17.039 WindowServer[95]: Created shield window 0x7 for display 0x003f003d\
14.07.13 17:29:17.042 WindowServer[95]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available\
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0\
UUID 0x000006100000b00500000000042c0140\
14.07.13 17:29:17.043 WindowServer[95]: Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 1 modes available\
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0\
UUID 0xffffffffffffffffffffffff003f003e\
14.07.13 17:29:17.043 WindowServer[95]: Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available\
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0\
UUID 0xffffffffffffffffffffffff003f003d\
14.07.13 17:29:17.043 WindowServer[95]: CGXPerformInitialDisplayConfiguration\
14.07.13 17:29:17.043 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; Vendor 0x610 Model 0xb005 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1\
14.07.13 17:29:17.043 WindowServer[95]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1\
14.07.13 17:29:17.043 WindowServer[95]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1\
14.07.13 17:29:17.699 configd[16]: network changed: v4(en0+:192.168.1.33) v6(en0!:fe80::de0b:1aff:fea8:5393) DNS+ Proxy SMB\
14.07.13 17:29:17.842 WindowServer[95]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, accelerator 0x00003f9b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB\
14.07.13 17:29:17.855 WindowServer[95]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, texture units 8, texture max 16384, viewport max \{16384, 16384\}, extensions FPRG|NPOT|GLSL|FLOAT\
14.07.13 17:29:17.884 loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.\
14.07.13 17:29:18.765 ntpd[97]: proto: precision = 1.000 usec\
14.07.13 17:29:18.822 WindowServer[95]: Unable to open IOHIDSystem (e00002bd)\
14.07.13 17:29:18.000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)\
14.07.13 17:29:19.470 WindowServer[95]: Created shield window 0x8 for display 0x042c0140\
14.07.13 17:29:19.470 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
14.07.13 17:29:19.488 launchctl[120]: com.apple.findmymacmessenger: Already loaded\
14.07.13 17:29:19.662 com.apple.SecurityServer[19]: Session 100004 created\
14.07.13 17:29:19.710 WindowServer[95]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.\
14.07.13 17:29:19.804 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
14.07.13 17:29:20.101 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
14.07.13 17:29:20.334 com.apple.launchd[1]: (com.apple.xprotectupdater[26]) Exited with code: 252\
14.07.13 17:29:21.493 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
14.07.13 17:29:21.533 WindowServer[95]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042c0140 device: 0x10051f110 isBackBuffered: 1 numComp: 3 numDisp: 3\
14.07.13 17:29:23.698 BezelServices 236.3[44]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)\
14.07.13 17:29:25.074 hidd[49]: CGSShutdownServerConnections: Detaching application from window server\
14.07.13 17:29:25.074 hidd[49]: CGSDisplayServerShutdown: Detaching display subsystem from window server\
14.07.13 17:29:25.074 locationd[132]: NOTICE,Location icon should now be in state 0\
14.07.13 17:29:25.182 UserEventAgent[121]: cannot find useragent 1102\
14.07.13 17:29:25.332 loginwindow[44]: Login Window Started Security Agent\
14.07.13 17:29:26.161 SecurityAgent[134]: This is the first run\
14.07.13 17:29:26.162 SecurityAgent[134]: MacBuddy was run = 0\
14.07.13 17:29:26.177 SecurityAgent[134]: User info context values set for kurt\
14.07.13 17:29:27.516 awacsd[59]: Exiting\
14.07.13 17:29:29.046 loginwindow[44]: Login Window - Returned from Security Agent\
14.07.13 17:29:29.105 loginwindow[44]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102\
14.07.13 17:29:29.127 loginwindow[44]: USER_PROCESS: 44 console\
14.07.13 17:29:29.528 coreservicesd[66]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=108\
14.07.13 17:29:29.548 com.apple.launchd[1]: (com.wacom.pentablet[126]) Exited with code: 255\
14.07.13 17:29:29.593 com.apple.launchd.peruser.501[139]: (com.apple.gamed) Ignored this key: UserName\
14.07.13 17:29:29.593 com.apple.launchd.peruser.501[139]: (com.apple.gamed) Ignored this key: GroupName\
14.07.13 17:29:29.594 com.apple.launchd.peruser.501[139]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self\
14.07.13 17:29:29.597 loginwindow[44]: Connection with distnoted server was invalidated\
14.07.13 17:29:29.622 com.apple.launchd[1]: ([0x0-0x5005].com.wacom.Consumer_TouchDriver[138]) Exited with code: 255\
14.07.13 17:29:29.624 distnoted[143]: # distnote server agent absolute time: 63.250366578 civil time: Sun Jul 14 17:29:29 2013 pid: 143 uid: 501 root: no\
14.07.13 17:29:30.353 WindowServer[95]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.\
14.07.13 17:29:30.773 blued[58]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501\
14.07.13 17:29:30.774 coreservicesd[66]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationBirth to notificationID=119\
14.07.13 17:29:30.897 WindowServer[95]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
14.07.13 17:29:31.101 com.apple.launchd.peruser.501[139]: (com.apple.afpstat-qfa[174]) Exited with code: 2\
14.07.13 17:29:31.203 talagent[154]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m\
14.07.13 17:29:31.203 talagent[154]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m\
14.07.13 17:29:32.199 locationd[179]: NOTICE,Location icon should now be in state 0\
14.07.13 17:29:32.345 apsd[175]: Couldn't change keychain information for default user: -25299\
14.07.13 17:29:32.510 com.apple.launchd.peruser.501[139]: (com.apple.mrt.uiagent[164]) Exited with code: 255\
14.07.13 17:29:32.591 NetworkBrowserAgent[186]: Starting NetworkBrowserAgent\
14.07.13 17:29:32.998 WindowServer[95]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.\
14.07.13 17:29:37.368 com.apple.SecurityServer[19]: Session 100005 created\
14.07.13 17:29:39.787 WindowServer[95]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 7.79 seconds (server forcibly re-enabled them after 1.00 seconds)\
14.07.13 17:29:49.093 com.apple.time[142]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).\
14.07.13 17:29:49.116 genatsdb[202]: ########## genatsdb Sandboxed. ##########\
14.07.13 17:29:49.348 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[125]) Exit timeout elapsed (20 seconds). Killing\
14.07.13 17:29:49.481 genatsdb[203]: ########## genatsdb Sandboxed. ##########\
14.07.13 17:29:55.004 SyncServer[200]: [0x7fd2b1c1b9f0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.\
14.07.13 17:29:56.000 kernel[0]: USBMSC Identifier (non-unique): KZGCAPH0951 0x5ac 0x1500 0x202\
14.07.13 17:29:57.807 com.apple.time[142]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).\
14.07.13 17:30:10.000 kernel[0]: jnl: disk1s3: replay_journal: from: 35868672 to: 35934208 (joffset 0x1d1f000)\
14.07.13 17:30:10.000 kernel[0]: jnl: disk1s3: journal replay done.\
14.07.13 17:30:10.000 kernel[0]: jnl: disk1s4: replay_journal: from: 36921344 to: 36995072 (joffset 0x1d1f000)\
14.07.13 17:30:10.000 kernel[0]: jnl: disk1s4: journal replay done.\
14.07.13 17:30:11.000 kernel[0]: jnl: disk1s5: replay_journal: from: 37044224 to: 37109760 (joffset 0x1d18000)\
14.07.13 17:30:11.000 kernel[0]: jnl: disk1s5: journal replay done.\
14.07.13 17:30:11.000 kernel[0]: jnl: disk1s2: replay_journal: from: 83034112 to: 83140608 (joffset 0x1d1f000)\
14.07.13 17:30:12.000 kernel[0]: jnl: disk1s2: journal replay done.\
14.07.13 17:30:24.629 coreaudiod[129]: Disabled automatic stack shots because audio IO is active\
14.07.13 17:30:24.830 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
14.07.13 17:30:27.137 genatsdb[203]: *GENATSDB* FontObjects generated = 656\
14.07.13 17:30:28.991 genatsdb[202]: *GENATSDB* FontObjects generated = 633\
14.07.13 17:30:50.048 com.apple.SecurityServer[19]: Session 100007 created\
14.07.13 17:30:54.426 firefox-bin[254]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.\
14.07.13 17:30:54.426 firefox-bin[254]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.\
14.07.13 17:30:54.427 firefox-bin[254]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.\
14.07.13 17:30:54.000 kernel[0]: AppleBCM5701Ethernet: 0 1 BCM5701Enet::replaceOrCopyPacket worked after N tries\
14.07.13 17:32:19.000 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.driver.AudioAUUC triggered rebuild\
14.07.13 17:32:24.148 com.apple.launchd.peruser.501[139]: ([0x0-0x25025].com.apple.installer[295]) Exited: Killed: 9\
14.07.13 17:32:39.371 com.apple.launchd.peruser.501[139]: ([0x0-0x27027].com.apple.installer[298]) Exited: Killed: 9\
14.07.13 17:32:43.992 coreaudiod[129]: Disabled automatic stack shots because audio IO is active\
14.07.13 17:32:44.619 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
14.07.13 17:32:45.069 coreaudiod[129]: Disabled automatic stack shots because audio IO is active\
14.07.13 17:32:45.696 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
14.07.13 17:33:30.546 com.apple.backupd[313]: Starting automatic backup\
14.07.13 17:33:31.318 com.apple.backupd[313]: Backing up to: /Volumes/Time Machine/Backups.backupdb\
14.07.13 17:33:32.254 com.apple.backupd[313]: Event store UUIDs don't match for volume: Macintosh HD\
14.07.13 17:33:32.511 com.apple.backupd[313]: Deep event scan at path:/ reason:must scan subdirs|new event db|\
14.07.13 17:34:09.502 coreaudiod[129]: Disabled automatic stack shots because audio IO is active\
14.07.13 17:34:10.268 coreaudiod[129]: Enabled automatic stack shots because audio IO is inactive\
14.07.13 17:34:13.596 Safari[316]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.\
14.07.13 17:34:13.597 Safari[316]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.\
14.07.13 17:34:13.597 Safari[316]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.\
14.07.13 17:34:34.966 com.apple.backupd[313]: Finished scan\
14.07.13 17:34:44.328 com.apple.backupd[313]: Found 728 files (41.1 MB) needing backup\
14.07.13 17:34:44.509 com.apple.backupd[313]: 376.8 MB required (including padding), 837.3 GB available\
14.07.13 17:34:45.009 WebProcess[318]: objc[318]: Object 0x7fdd1a42bf80 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug\
14.07.13 17:34:45.110 WebProcess[318]: objc[318]: Object 0x7fdd1a42bf80 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug\
14.07.13 17:34:46.236 CalendarAgent[171]: [com.apple.calendar.store.log.caldav.queue] [Account [email protected]@https://cal.me.com:8443/principals/users/1.1106928981/ timed out when executing operation: <CalDAVAccountRefreshQueueableOperation: 0x7fb09b4e2bb0; Sequence: 0>]\
14.07.13 17:34:46.287 CalendarAgent[171]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1001 "Zeit\'fcberschreitung bei der Anforderung." UserInfo=0x7fb09c064200 \{NSUnderlyingError=0x7fb09c067100 "Zeit\'fcberschreitung bei der Anforderung.", NSErrorFailingURLStringKey=https://kurt.wyttenbach%[email protected]:8443/principals/users/1.1106928981///kurt.wyttenbach%[email protected]:8443/principals/users/1.1106928981/, NSErrorFailingURLKey=https://kurt.wyttenbach%[email protected]:8443/principals/users/1.1106928981///kurt.wyttenbach%[email protected]:8443/principals/users/1.1106928981/, [email protected], CalDAVErrFromRefresh=YES, NSLocalizedDescription=Zeit\'fcberschreitung bei der Anforderung.\}]\
14.07.13 17:35:17.528 com.apple.backupd[313]: Copied 3507 files (40.2 MB) from volume Macintosh HD.\
14.07.13 17:35:17.575 com.apple.backupd[313]: Using file event preflight for Macintosh HD\
14.07.13 17:35:17.583 com.apple.backupd[313]: Will copy (189 KB) from Macintosh HD\
14.07.13 17:35:17.584 com.apple.backupd[313]: Found 38 files (189 KB) needing backup\
14.07.13 17:35:17.584 com.apple.backupd[313]: 327.7 MB required (including padding), 837.25 GB available\
14.07.13 17:35:21.858 com.apple.backupd[313]: Copied 1007 files (190 KB) from volume Macintosh HD.\
14.07.13 17:35:22.461 com.apple.backupd[313]: Created new backup: 2013-07-14-173521\
14.07.13 17:35:23.524 com.apple.backupd[313]: Starting post-backup thinning\
14.07.13 17:35:27.147 com.apple.backupd[313]: Deleted /Volumes/Time Machine/Backups.backupdb/Macintosh/2013-07-10-144448 (803 KB)\
14.07.13 17:35:32.317 com.apple.backupd[313]: Deleted /Volumes/Time Machine/Backups.backupdb/Macintosh/2013-07-11-133335 (10.1 MB)\
14.07.13 17:35:36.667 com.apple.backupd[313]: Deleted /Volumes/Time Machine/Backups.backupdb/Macintosh/2013-07-11-121821 (14.6 MB)\
14.07.13 17:35:36.667 com.apple.backupd[313]: Post-back up thinning complete: 3 expired backups removed\
14.07.13 17:35:36.721 com.apple.backupd[313]: Backup completed successfully.\
14.07.13 17:36:35.643 WindowServer[95]: Created shield window 0x72 for display 0x042c0140\
14.07.13 17:36:35.643 WindowServer[95]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)\
14.07.13 17:36:35.651 WindowServer[95]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)\
14.07.13 17:36:35.651 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc678e09560> Sun Jul 14 18:29:10 2013 CEST (approx)\
14.07.13 17:36:35.651 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc678e09560> Sun Jul 14 18:29:10 2013 CEST (approx)\
14.07.13 17:36:57.000 bootlog[0]: BOOT_TIME 1373816217 0\
14.07.13 17:37:05.000 kernel[0]: PMAP: PCID enabled\
14.07.13 17:37:05.000 kernel[0]: PMAP: Supervisor Mode Execute Protection enabled\
14.07.13 17:37:05.000 kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64\
14.07.13 17:37:05.000 kernel[0]: vm_page_bootstrap: 3917120 free pages and 244416 wired pages\
14.07.13 17:37:05.000 kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]\
14.07.13 17:37:05.000 kernel[0]: zone leak detection enabled\
14.07.13 17:37:05.000 kernel[0]: standard timeslicing quantum is 10000 us\
14.07.13 17:37:05.000 kernel[0]: standard background quantum is 2500 us\
14.07.13 17:37:05.000 kernel[0]: mig_table_max_displ = 74\
14.07.13 17:37:05.000 kernel[0]: TSC Deadline Timer supported and enabled\
14.07.13 17:37:05.000 kernel[0]: corecrypto kext started!\
14.07.13 17:37:05.000 kernel[0]: Running kernel space in FIPS MODE\
14.07.13 17:37:05.000 kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d\
14.07.13 17:37:05.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!\
14.07.13 17:37:05.000 kernel[0]: corecrypto.kext FIPS POST passed!\
14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled\
14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled\
14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled\
14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled\
14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled\
14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled\
14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled\
14.07.13 17:37:05.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled\
14.07.13 17:37:05.000 kernel[0]: calling mpo_policy_init for TMSafetyNet\
14.07.13 17:37:05.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)\
14.07.13 17:37:05.000 kernel[0]: calling mpo_policy_init for Sandbox\
14.07.13 17:37:05.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)\
14.07.13 17:37:05.000 kernel[0]: calling mpo_policy_init for Quarantine\
14.07.13 17:37:05.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)\
14.07.13 17:37:05.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993\
14.07.13 17:37:05.000 kernel[0]: The Regents of the University of California. All rights reserved.\
14.07.13 17:37:05.000 kernel[0]: MAC Framework successfully initialized\
14.07.13 17:37:05.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers\
14.07.13 17:37:05.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87\
14.07.13 17:37:05.000 kernel[0]: ACPI: System State [S0 S3 S4 S5]\
14.07.13 17:37:05.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 2344\
14.07.13 17:37:05.000 kernel[0]: AppleIntelCPUPowerManagement: (built 12:18:39 Oct 18 2012) initialization complete\
14.07.13 17:37:05.000 kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000\
14.07.13 17:37:05.000 kernel[0]: [ PCI configuration begin ]\
14.07.13 17:37:05.000 kernel[0]: Sleep failure code 0x00000000 0x1f006600\
14.07.13 17:37:05.000 kernel[0]: console relocated to 0xfc0020000\
14.07.13 17:37:05.000 kernel[0]: PCI configuration changed (bridge=17 device=4 cardbus=0)\
14.07.13 17:37:05.000 kernel[0]: [ PCI configuration end, bridges 13 devices 16 ]\
14.07.13 17:37:05.000 kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management\
14.07.13 17:37:05.000 kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled\
14.07.13 17:37:05.000 kernel[0]: AppleThunderboltNHIType2::start - SXFP method found\
14.07.13 17:37:05.000 kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]\
14.07.13 17:37:05.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused\
14.07.13 17:37:05.000 kernel[0]: rooting via boot-uuid from /chosen: FA41975F-8187-39BF-A050-6EA65F3EC755\
14.07.13 17:37:05.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>\
14.07.13 17:37:05.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start\
14.07.13 17:37:05.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start\
14.07.13 17:37:05.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded\
14.07.13 17:37:05.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded\
14.07.13 17:37:05.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready\
14.07.13 17:37:05.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD WDC WD10EALX-408EA0 Media/IOGUIDPartitionScheme/Customer@2\
14.07.13 17:37:05.000 kernel[0]: BSD root: disk0s2, major 1, minor 2\
14.07.13 17:37:05.000 kernel[0]: BTCOEXIST off \
14.07.13 17:37:05.000 kernel[0]: BRCM tunables:\
14.07.13 17:37:05.000 kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]\
14.07.13 17:37:05.000 kernel[0]: jnl: unknown-dev: replay_journal: from: 11534848 to: 15105536 (joffset 0x1d18000)\
14.07.13 17:37:05.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0\
14.07.13 17:37:05.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0\
14.07.13 17:37:05.000 kernel[0]: USBMSC Identifier (non-unique): KZGCAPH0951 0x5ac 0x1500 0x202\
14.07.13 17:37:05.000 kernel[0]: jnl: unknown-dev: journal replay done.\
14.07.13 17:37:05.000 kernel[0]: Kernel is LP64\
14.07.13 17:37:05.000 kernel[0]: hfs: Removed 10 orphaned / unlinked files and 31 directories \
14.07.13 17:37:00.744 com.apple.launchd[1]: *** launchd[1] has started up. ***\
14.07.13 17:37:00.744 com.apple.launchd[1]: *** Shutdown logging is enabled. ***\
14.07.13 17:37:05.106 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination\
14.07.13 17:37:05.000 kernel[0]: BCM5701Enet: Ethernet address 10:dd:b1:9f:be:37\
14.07.13 17:37:05.000 kernel[0]: AirPort_Brcm4331: Ethernet address 8c:2d:aa:57:1a:eb\
14.07.13 17:37:05.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification\
14.07.13 17:37:05.000 kernel[0]: IO80211Interface::efiNVRAMPublished(): \
14.07.13 17:37:10.229 hidd[49]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1\
14.07.13 17:37:10.231 hidd[49]: void __IOHIDLoadBundles(): Loaded 0 HID plugins\
14.07.13 17:37:10.241 fseventsd[50]: event logs in /.fseventsd out of sync with volume. destroying old logs. (464 13 499)\
14.07.13 17:37:10.241 fseventsd[50]: log dir: /.fseventsd getting new uuid: 6B676697-3A0C-4445-9059-FE1886DE3608\
14.07.13 17:37:10.000 kernel[0]: macx_swapon SUCCESS\
14.07.13 17:37:10.000 kernel[0]: Waiting for DSMOS...\
14.07.13 17:37:15.026 coreservicesd[65]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false\
14.07.13 17:37:15.047 mDNSResponder[41]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12\
14.07.13 17:37:15.050 airportd[71]: _processDLILEvent: en1 attached (down)\
14.07.13 17:37:15.000 kernel[0]: createVirtIf(): ifRole = 1\
14.07.13 17:37:15.000 kernel[0]: in func createVirtualInterface ifRole = 1\
14.07.13 17:37:15.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff80449cb400\
14.07.13 17:37:15.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1\
14.07.13 17:37:15.000 kernel[0]: Created virtif 0xffffff80449cb400 p2p0\
14.07.13 17:37:15.148 com.apple.SecurityServer[16]: Session 100000 created\
14.07.13 17:37:15.149 blued[58]: Read the UHE Info\
14.07.13 17:37:15.149 blued[58]: Read version 2 info. Number of devices:2\
14.07.13 17:37:15.149 blued[58]: Class of device: 0x2580\
14.07.13 17:37:15.150 blued[58]: Device name: 'Apple Magic Mouse' length:18\
14.07.13 17:37:15.150 blued[58]: Finished reading the HID data\
14.07.13 17:37:15.150 blued[58]: Found a device with PID:0x030d VID:0x05ac\
14.07.13 17:37:15.151 blued[58]: Class of device: 0x2540\
14.07.13 17:37:15.151 blued[58]: Device name: 'Apple Wireless Keyboard' length:24\
14.07.13 17:37:15.151 blued[58]: Finished reading the HID data\
14.07.13 17:37:15.151 blued[58]: Found a device with PID:0x0256 VID:0x05ac\
14.07.13 17:37:15.207 com.apple.kextd[12]: Can't load /System/Library/Extensions/LogitechUSBHIDevices.kext - no code for running kernel's architecture.\
14.07.13 17:37:15.208 com.apple.kextd[12]: Load com.Logitech.driver.HIDDevices failed; removing personalities from kernel.\
14.07.13 17:37:15.000 kernel[0]: NVDAStartup: Official\
14.07.13 17:37:15.000 kernel[0]: [IOBluetoothHCIController][start] -- completed\
14.07.13 17:37:15.000 kernel[0]: NVDAGK100HAL loaded and registered\
14.07.13 17:37:15.000 kernel[0]: IOBluetoothUSBDFU::probe\
14.07.13 17:37:15.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828B FirmwareVersion - 0x0032\
14.07.13 17:37:15.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed\
14.07.13 17:37:15.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification \
14.07.13 17:37:15.000 kernel[0]: Previous Shutdown Cause: -128\
14.07.13 17:37:15.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService\
14.07.13 17:37:15.000 kernel[0]: DSMOS has arrived\
14.07.13 17:37:15.224 mds[40]: (Normal) FMW: FMW 0 0\
14.07.13 17:37:15.381 appleeventsd[55]: main: Starting up\
14.07.13 17:37:15.388 com.apple.usbmuxd[29]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit\
14.07.13 17:37:15.943 WindowServer[81]: Server is starting up\
14.07.13 17:37:15.945 configd[17]: network changed.\
14.07.13 17:37:15.000 kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).\
14.07.13 17:37:15.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed\
14.07.13 17:37:16.000 kernel[0]: X86PlatformPlugin::setRingTable - No ring table found!\
14.07.13 17:37:16.000 kernel[0]: X86PlatformPlugin::configResourceHandler - Failed to set ring table!\
14.07.13 17:37:16.000 kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice11a2\
14.07.13 17:37:16.315 com.apple.SecurityServer[16]: Entering service\
14.07.13 17:37:16.404 UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL\
14.07.13 17:37:16.470 systemkeychain[92]: done file: /var/run/systemkeychaincheck.done\
14.07.13 17:37:16.516 loginwindow[44]: Login Window Application Started\
14.07.13 17:37:16.544 netbiosd[89]: Unable to start NetBIOS name service: \
14.07.13 17:37:16.554 awacsd[59]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)\
14.07.13 17:37:16.570 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store\
14.07.13 17:37:16.606 digest-service[113]: label: default\
14.07.13 17:37:16.606 digest-service[113]: dbname: od:/Local/Default\
14.07.13 17:37:16.606 digest-service[113]: mkey_file: /var/db/krb5kdc/m-key\
14.07.13 17:37:16.606 digest-service[113]: acl_file: /var/db/krb5kdc/kadmind.acl\
14.07.13 17:37:16.608 digest-service[113]: digest-request: uid=0\
14.07.13 17:37:16.636 rpcsvchost[115]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded\
14.07.13 17:37:16.639 digest-service[113]: digest-request: init request\
14.07.13 17:37:16.643 digest-service[113]: digest-request: init return domain: BUILTIN server: LOCALHOST\
14.07.13 17:37:16.740 WindowServer[81]: Session 256 retained (2 references)\
14.07.13 17:37:16.740 WindowServer[81]: Session 256 released (1 references)\
14.07.13 17:37:16.760 WindowServer[81]: Session 256 retained (2 references)\
14.07.13 17:37:16.760 WindowServer[81]: init_page_flip: page flip mode is on\
14.07.13 17:37:16.915 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
14.07.13 17:37:16.915 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)\
14.07.13 17:37:17.347 WindowServer[81]: mux_initialize: Couldn't find any matches\
14.07.13 17:37:17.359 WindowServer[81]: GLCompositor enabled for tile size [256 x 256]\
14.07.13 17:37:17.359 WindowServer[81]: CGXGLInitMipMap: mip map mode is on\
14.07.13 17:37:17.425 WindowServer[81]: WSMachineUsesNewStyleMirroring: true\
14.07.13 17:37:17.425 WindowServer[81]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available\
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0\
UUID 0x000006100000b00500000000042c0140\
14.07.13 17:37:17.426 WindowServer[81]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available\
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0\
UUID 0xffffffffffffffffffffffff003f003e\
14.07.13 17:37:17.426 WindowServer[81]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available\
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0\
UUID 0xffffffffffffffffffffffff003f003d\
14.07.13 17:37:17.431 WindowServer[81]: Created shield window 0x5 for display 0x042c0140\
14.07.13 17:37:17.432 WindowServer[81]: Created shield window 0x6 for display 0x003f003e\
14.07.13 17:37:17.432 WindowServer[81]: Created shield window 0x7 for display 0x003f003d\
14.07.13 17:37:17.433 WindowServer[81]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 42 modes available\
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0\
UUID 0x000006100000b00500000000042c0140\
14.07.13 17:37:17.433 WindowServer[81]: Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 1 modes available\
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0\
UUID 0xffffffffffffffffffffffff003f003e\
14.07.13 17:37:17.433 WindowServer[81]: Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available\
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0\
UUID 0xffffffffffffffffffffffff003f003d\
14.07.13 17:37:17.434 WindowServer[81]: CGXPerformInitialDisplayConfiguration\
14.07.13 17:37:17.434 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; Vendor 0x610 Model 0xb005 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1\
14.07.13 17:37:17.434 WindowServer[81]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1\
14.07.13 17:37:17.434 WindowServer[81]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1\
14.07.13 17:37:17.503 WindowServer[81]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, accelerator 0x0000409b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB\
14.07.13 17:37:17.508 WindowServer[81]: GLCompositor: GL renderer id 0x01022644, GL mask 0x00000007, texture units 8, texture max 16384, viewport max \{16384, 16384\}, extensions FPRG|NPOT|GLSL|FLOAT\
14.07.13 17:37:17.511 loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.\
14.07.13 17:37:17.524 WindowServer[81]: Unable to open IOHIDSystem (e00002bd)\
14.07.13 17:37:17.000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)\
14.07.13 17:37:18.109 WindowServer[81]: Created shield window 0x8 for display 0x042c0140\
14.07.13 17:37:18.109 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
14.07.13 17:37:18.143 launchctl[128]: com.apple.findmymacmessenger: Already loaded\
14.07.13 17:37:18.174 com.apple.SecurityServer[16]: Session 100004 created\
14.07.13 17:37:18.212 hidd[49]: CGSShutdownServerConnections: Detaching application from window server\
14.07.13 17:37:18.212 hidd[49]: CGSDisplayServerShutdown: Detaching display subsystem from window server\
14.07.13 17:37:18.234 loginwindow[44]: Login Window Started Security Agent\
14.07.13 17:37:18.324 SecurityAgent[137]: This is the first run\
14.07.13 17:37:18.325 SecurityAgent[137]: MacBuddy was run = 0\
14.07.13 17:37:18.000 kernel[0]: [BNBMouseDevice::init][75.19] init is complete\
14.07.13 17:37:18.343 WindowServer[81]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042c0140 device: 0x104561110 isBackBuffered: 1 numComp: 3 numDisp: 3\
14.07.13 17:37:18.343 SecurityAgent[137]: User info context values set for kurt\
14.07.13 17:37:18.367 coreaudiod[138]: Enabled automatic stack shots because audio IO is inactive\
14.07.13 17:37:18.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]\
14.07.13 17:37:18.477 configd[17]: network changed: v6(en0+:fe80::de0b:1aff:fea8:5393) DNS* Proxy+ SMB\
14.07.13 17:37:18.000 kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1\
14.07.13 17:37:18.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered\
14.07.13 17:37:19.017 loginwindow[44]: Login Window - Returned from Security Agent\
14.07.13 17:37:19.023 loginwindow[44]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102\
14.07.13 17:37:19.040 loginwindow[44]: USER_PROCESS: 44 console\
14.07.13 17:37:19.404 com.apple.launchd.peruser.501[143]: (com.apple.gamed) Ignored this key: UserName\
14.07.13 17:37:19.404 com.apple.launchd.peruser.501[143]: (com.apple.gamed) Ignored this key: GroupName\
14.07.13 17:37:19.404 com.apple.launchd.peruser.501[143]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self\
14.07.13 17:37:19.408 loginwindow[44]: Connection with distnoted server was invalidated\
14.07.13 17:37:19.431 distnoted[147]: # distnote server agent absolute time: 22.728758230 civil time: Sun Jul 14 17:37:19 2013 pid: 147 uid: 501 root: no\
14.07.13 17:37:19.432 WindowServer[81]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.\
14.07.13 17:37:19.436 coreservicesd[65]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=113\
14.07.13 17:37:19.438 com.apple.launchd[1]: (com.wacom.pentablet[134]) Exited with code: 255\
14.07.13 17:37:19.000 kernel[0]: [AppleMultitouchDevice::start] entered\
14.07.13 17:37:19.543 blued[58]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501\
14.07.13 17:37:19.804 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
14.07.13 17:37:19.828 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
14.07.13 17:37:20.559 configd[17]: network changed: v6(en0:fe80::de0b:1aff:fea8:5393) DNS* Proxy SMB\
14.07.13 17:37:20.619 mDNSResponder[41]: D2D_IPC: Loaded\
14.07.13 17:37:20.619 mDNSResponder[41]: D2DInitialize succeeded\
14.07.13 17:37:20.666 locationd[45]: NOTICE,Location icon should now be in state 0\
14.07.13 17:37:23.690 configd[17]: network changed: v4(en0+:192.168.1.33) v6(en0!:fe80::de0b:1aff:fea8:5393) DNS+ Proxy SMB\
14.07.13 17:37:23.803 ntpd[109]: proto: precision = 1.000 usec\
14.07.13 17:37:24.518 locationd[164]: NOTICE,Location icon should now be in state 0\
14.07.13 17:37:25.894 com.apple.SecurityServer[16]: Session 100005 created\
14.07.13 17:37:25.963 mds[40]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"\
14.07.13 17:37:25.964 mds[40]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"\
14.07.13 17:37:25.973 apsd[61]: Couldn't change keychain information for default user: -25299\
14.07.13 17:37:26.575 com.apple.launchd[1]: (com.apple.xprotectupdater[26]) Exited with code: 252\
14.07.13 17:37:31.570 awacsd[59]: Exiting\
14.07.13 17:37:32.942 WindowServer[81]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.\
14.07.13 17:37:32.978 WindowServer[81]: Display 0x042c0140: MappedDisplay Unit 0; ColorProfile \{ 2, "iMac"\}; TransferFormula (1.000000, 1.000000, 1.000000)\
14.07.13 17:37:33.073 BezelServices 236.3[44]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)\
14.07.13 17:37:33.277 NetworkBrowserAgent[185]: Starting NetworkBrowserAgent\
14.07.13 17:37:33.316 talagent[176]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m\
14.07.13 17:37:33.316 talagent[176]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m\
14.07.13 17:37:33.000 kernel[0]: jnl: disk1s2: replay_journal: from: 46989312 to: 61497344 (joffset 0x1d1f000)\
14.07.13 17:37:36.368 talagent[176]: CGSGetOnScreenWindowList: Invalid connection\
14.07.13 17:37:36.368 coreservicesd[65]: Can't change an application into stopped state for app App:"Safari" [ 0x0/0x7007] @ 0x0x7fc899b06030 because it's already been started.\
14.07.13 17:37:37.308 WindowServer[81]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.\
14.07.13 17:37:37.733 WindowServer[81]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.43 seconds (server forcibly re-enabled them after 1.00 seconds)\
14.07.13 17:37:39.381 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[133]) Exit timeout elapsed (20 seconds). Killing\
14.07.13 17:37:41.000 kernel[0]: jnl: disk1s2: journal replay done.\
14.07.13 17:37:42.000 kernel[0]: hfs: Removed 0 orphaned / unlinked files and 187 directories \
14.07.13 17:37:42.090 fseventsd[50]: event logs in /Volumes/Time Machine/.fseventsd out of sync with volume. destroying old logs. (3428 9 3429)\
14.07.13 17:37:42.097 fseventsd[50]: log dir: /Volumes/Time Machine/.fseventsd getting new uuid: 3F58FA72-0AA8-4ECC-89C5-B97788DD1AA0\
14.07.13 17:37:42.425 coreservicesd[65]: Can't change an application into stopped state for app App:"Finder" [ 0x0/0xc00c] @ 0x0x7fc89990e0d0 because it's already been started.\
14.07.13 17:37:42.000 kernel[0]: jnl: disk1s3: replay_journal: from: 35934208 to: 36024320 (joffset 0x1d1f000)\
14.07.13 17:37:43.000 kernel[0]: jnl: disk1s3: journal replay done.\
14.07.13 17:37:44.326 WindowServer[81]: CGXDisableUpdate: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.\
14.07.13 17:37:45.242 fseventsd[50]: event logs in /Volumes/TB 2/.fseventsd out of sync with volume. destroying old logs. (3337 3 3432)\
14.07.13 17:37:45.262 fseventsd[50]: log dir: /Volumes/TB 2/.fseventsd getting new uuid: C8782414-AB4E-4C53-95EC-4B1B2FD2ED51\
14.07.13 17:37:45.000 kernel[0]: jnl: disk1s4: replay_journal: from: 36995072 to: 37093376 (joffset 0x1d1f000)\
14.07.13 17:37:46.660 WindowServer[81]: reenable_update_for_connection: UI updates were finally reenabled by application "Safari" after 3.33 seconds (server forcibly re-enabled them after 1.00 seconds)\
14.07.13 17:37:47.300 com.apple.launchd.peruser.501[143]: (com.apple.afpstat-qfa[234]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory\
14.07.13 17:37:47.300 com.apple.launchd.peruser.501[143]: (com.apple.afpstat-qfa[234]) Job failed to exec(3) for weird reason: 2\
14.07.13 17:37:47.000 kernel[0]: jnl: disk1s4: journal replay done.\
14.07.13 17:37:49.320 WindowServer[81]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.\
14.07.13 17:37:49.362 com.apple.time[146]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).\
14.07.13 17:37:49.507 WindowServer[81]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.19 seconds (server forcibly re-enabled them after 1.00 seconds)\
14.07.13 17:37:49.527 com.apple.launchd.peruser.501[143]: (com.apple.mrt.uiagent[225]) Exited with code: 255\
14.07.13 17:37:50.018 fseventsd[50]: event logs in /Volumes/TB 3/.fseventsd out of sync with volume. destroying old logs. (3338 5 3437)\
14.07.13 17:37:50.108 DictationIM[216]: Exception in proxy <IMKTextInput> respondsToSelector: inputSessionDoneSleep\
name = NSPortTimeoutException\
reason = connection timeout: did not receive reply\
userInfo = (null)\
0 CoreFoundation 0x0000000109fa2b06 __exceptionPreprocess + 198\
1 libobjc.A.dylib 0x0000000109ddd3f0 objc_exception_throw + 43\
2 CoreFoundation 0x0000Same problem, my brand new iMac (27inch 2011 SSD OS X 10.6.8) comes out of sleep and after a few seconds it looks like it cannot write to disk anymore. Programs that are open can still be accessed, however once they need to log or write something to disk the system freezes.
Tried the following:
Thunderbolt 27/06 firmware upgrade
SMC and PRAM reset
Extended hardware test -> everything OK
Created new user to see if it is a cache issue that coming from my Time Machine restore from my old iMac
Keyboard and Magic mouse from my old iMac
Nothing helped, so I'm becoming desperate. I suspect an SSD drive issue however cannot find any error in the logs.
Rgds,
Zwiri -
Problem in sleep and hiberbate as system restarts if sleep or hiberbate
Dear Sir/Madam,
Please find solution for the problem of video card driver. My system works well when automatic update from windows 8.0 to windows 8.1 is done the system stops going to sleep or hibernation.
There is problem with catalyst control center (error is settings not found)
After updating Bios and All drivers the problem is not resolved.
Best regards,Hi @Puneet1 ,
Welcome to the HP Forums!
It is a great place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that after updating your Windows 8 to 8.1 you are experiencing an issue with sleep/hibernation and the Catalyst Control Center.
For the Catalyst Control Center I suggest you download the updated driver and save it.
Uninstall the current drive and delete it
restart your notebook and install the updated driver from where you saved it.
Here is a link to HP PCs - Troubleshooting Sleep and Hibernate Issues (Windows 8).
If the sleep/hibernation issue remains you can try this step.
Go to the command prompt and run as administrator
Type powercfg -restoredefaultschemes and press enter.
If your issues still remain, I suggest you try installing the original drivers from the recovery manager.
HP PCs - Using Recovery Manager to Restore Software and Drivers (Windows 8)
Next I would do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 8)
There will be an option to backup your personal files to prevent data loss.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
You may choose to contact HP support for assistance at any time.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Problems: undoes sleep, and won't give up
Folks:
A few days ago, I connected a new Seagate 1.5TB drive (USB2), accepted an offer to format the drive, and enabled TM. (Or was it vice-versa? I don't recall.)
First Problem: Something undoes sleep
Since then, when I use Apple Menu "Sleep" the system goes to sleep, and that wakes up a few seconds later. Always. This cannot be good for the system, and it isn't good for my electricity bill.
Is this waking due to enabling TM and/or attaching the Seagate drive? It seems likely, as it started happen just after I enabled TM, and I am certain I have done nothing else to the system that should affect sleep. About "Put the hard disk(s) to sleep when possible" in the Energy Saver Control Panel: I routinely leave this ENABLED. I've tried both settings since I enabled TM. No difference.
I routinely leave the Energy Saver "Put the computer to sleep when it is inactive for" setting to 15 or so minutes. Since the computer was not been asleep any morning when I start work since I enabled TM, I assume this route to sleep also fails.
Q1: How to restore sound sleep on my system?
Second issue: Won't give up.
At the moment, the TM monitor icon at the upper right of my screen is circling. It's been circling for at least 15 minutes. Before that I noticed that TM had started a backup. I checked: it was going to back up only 552 KB, which seemed reasonable -- I haven't been doing very much so far this morning. I checked minutes later. No sign of progress. I checked a few minutes later, no progress, so I clicked on the 'x' to abort the backup. Now the top entry on the TM monitor pulldown has been reading "Stopping Backup" for at least 5 minutes.
What to do? TM won't be able to do the next hourly backup if it's still trying to abort the previous one. I tried disabling TM in its Control Panel. It's now off, and yet both the Control Panel and monitor say it's back to trying to backup 552KB ... again.
I'll try dismounting and remounting the external drive. If that fails, I'll restart the system. But, of course, neither of these should be necessary.
BTW, strangely, the full TM menu says the last backup was at 3:10 AM, almost 7 hours ago. Since I didn't try to put the system to sleep last night at about 10pm, and it wasn't asleep when I arrived ... why 3:10? Maybe that's when the Unix cron-timed daily maintenance was done?
By the way, the USB drive IS alive and working. I opened it, found a random file from one of the backed-up folders, and copied it to my internal drive, no problem.
Q2: How to definitively abort a backup?
Q3: How to avoid hung backups in the future?
TIA,
HenryPondini:
Thanks for your response!
1. Exclude your TM disk from any anti-virus scanning.
None running.
2. Exclude it from Spotlight (System Preferences > Spotlight > Privacy)
Done! The next hourly scan was running so I aborted it by unmounting and remounting the external disk. When I remounted, TM appeared to be in a consistent, "happy" state. So I chose "Back Up Now" and the backup ran without apparent problem.
So far, so good, Excluding seems to have helped. I'll post back if anything different happens at the next hourly backup, or overnight.
3. Until you resolve this, leave the Put the hard drive(s) to sleep . . .
option OFF.
I did that before my original post, and left it disabled.
My system still won't stay asleep for more than a few seconds.
How is your USB disk attached to your Mac (direct or via USB hub;
port on back or keyboard)?
Directly to the back of the machine. My Mac did not seem to like for it to be connected though my external hub -- it complained about not enough power and shut down the hub. That seems strange, because both the drive and the hub are powered separately by wall-warts. But that's not an issue now.
There may be some clues in your logs. Download the Time Machine Buddy widget
from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html.
I'll just use the standard log interface... It shows some nice messages for successful TM backups. Two messages seem to correlate with TM hangs. Here they are:
Indexing a file failed. Returned -1120 for: /private/tmp, /Volumes/Time Machine Backups/Backups.backupdb/Espresso/2009-04-28-041015.inProgress/02A5D71D-2086-47 E0-A006-3C8030F2CAD8/Espresso's HD/private/tmp
Indexing a file failed. Returned -1120 for: /Library/Caches, /Volumes/Time Machine Backups/Backups.backupdb/Espresso/2009-04-28-041015.inProgress/0B66D534-640A-4F 08-9ED4-CBB0F3872450/Espresso's HD/Library/Caches
I googled around about "Indexing a file failed" in connection with TM, but I didn't find anything that useful.
You did this via the Finder? For experimenting, that's ok, but normally to
restore a file/folder from your backups, use the TM interface Enter Time
Machine. Using the Finder can result in permissions problems with the copied
files. Also be very careful not to use the Finder to change, move, or delete
anything in those backups...
Thanks for the warning. I figured as much. I just located a small file on the TM disk and made a copy of it on my internal drive. Simply copying a file from the TM backup directories should not be a problem. If it is, that would indicate TM is a lot less stable than it should be.
By the way, my profile is wrong. I'm running 10.5.6, fully updated.
Thanks,
Henry
Maybe you are looking for
-
Display problems when connecting MBP to LG 30FS4D HDTV
Apologies if a similar post has been asked before. Most questions related to this are with LCD TVs. Problem description : 1. I connected my MBP to my LG 30FS4D HDTV ( this is not an LCD ). Both handshake and I can see the output on my TV. MBP display
-
I have a table which has a column containing text with multiple lines.while i am trying to update that column i am facing the issue "Dear User, Enclosed is the attachment. Please direct problems at 209876534 or [email protected] Regards, Developement
-
DB adapter throws error while inserting ORABPEL-11616
Hi, I am using SOA suite 10.1.3.5. I have configured the BPEL DB adapter to insert into table AP_INVOICES_INTERFACE and i am getting the following error. I tried inserting record manually to the table and it is getting inserted. Any help in this rega
-
Make user/curson back & forth between the subforms of form?
Hello I am developing a adobe interactive form (webdynpro ABAP) with 4 sections/blocks to represent each sub form. I have 4 sub forms, say my_sub_form_1..... my_sub_form_2.......... my_sub_form_3........ my_sub_form_4, say, here user is family_head M
-
Thread: EPMINS-01001 error while installalling Hyperion 11.1.2.1.0
Hi All, I am getting an error EPMINS-01001 while i am running Installtool.cmd.For every prerequisite its showing ok but in the end its throwing below error: User home have to exist for successful installation. Checking user account (UAC) state.... us