Sleep Display Option in 10.4?

Hello Discussions,
Does anyone know if the 'Sleep Display' option available in Exposé in OSX Leopard is available for Tiger?
Perhaps a script or third-party piece of software?
Thanks for any advice.
Cheers, R.

Thanks Dale,
A little mis-understanding here
Yes I know that the Energy Saver can sleep the display, however, this is after a period of time.
In Leopard, you can sleep the display immediately as an option in Expose, which seems to be absent in Tiger.
I was hoping there was a workaround for it.
http://tinyurl.com/39m3lx6
Cheers, R.

Similar Messages

New 'Sleep Display' in Leopard

New to Leopard, the "Hot Corners" options in Screensaver prefs now includes the ability to set one or more screen corners to "Sleep Display" to make the energy saver kick in. Is anyone using this? Is anyone having problems with it?
I have dual displays (23" on a Mac Pro) and, of course, going to the corner I have designated to "Sleep Display" turns off the backlight in both displays. Oftentimes, when I come back later, the displays cannot be re-awakened. If they can, often the entire system is unresponsive -- no cursor/mouse movement, even the menubar clock is frozen.
There are two, separate failure modes: 1) when I move the mouse, the display awakens to show the system unresponsive and the clock shows a time around when I slept the display. The system is unresponsive to mouse clicks and keyboard input, though the mouse cursor is able to be moved; and 2) the displays do not awaken and I can sometimes log in via ssh to see that the system seems to be operating just fine (as determined by active processes in 'top' and the system date/time being current.)
Do any of you experience anything like this or have troubleshooting advice for someone who is?
I did not have this problem prior to upgrading to Leopard.

Bump. Same problem here. Just started though... I've had Leopard for months with no problems until now.

Screen saver + Energy Saver (Computer Sleep + Display Sleep) won't work since Mavericks

Howdy,
Sorry to bother you.
My computer: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
It took me some time to upgrade to Mavericks, but I did it eventually.
After having some problems with Spotlight (which was infinite looping indexing... and I just had to turn if off from Terminal), I realized I was encountering another big problem to me since the installation of Mavericks.
In System Preferences:
- 'Desktop and Screen Saver > Screen Saver' : it is set to 1 minute;
- 'Energy Saver > Computer Sleep' : it is set to 10 minutes;
- 'Energy Saver > Display Sleep' : it is set to 5 minutes;
- 'Energy Saver > Put hard disks to sleep when possible' : it is checked.
- 'Energy Saver > Wake for network access' : it was checked. I unchecked it. Nothing changes.
- 'Energy Saver > Start up automatically after a power failure' : it is unchecked.
- 'Energy Saver > Allow power button to put computer to sleep' : this option is absent from my System Preferences > Energy Saver, but I would like it.
So, before Mavericks, everything was working great.
Now, after 1 minute, or after 5 minutes, or after 10 minutes: it's all the same. Nothing is sleepy. Nothing is energy saving.
I did not change anything in my computer since I've updated to Mavericks. However, I changed Wi-Fi. Since it was the only new change, I've "played" with 'Energy Saver > Wake for network access'. When I opened my System Preferences, it was checked. I unchecked it. It did not change anything. I'm not sure what it's used for.
I would appreciate any advice to make it work as it used to.
Thanks for your time reading and typing your answer,
Have a good day,
Regards,

- 'Energy Saver > Allow power button to put computer to sleep' : this option is absent from my System Preferences > Energy Saver, but I would like it.
Built into the Software now.
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.
You might try Spotlight again. That is how the App Store knows what is installed.

Rich text box used in Infopath Form not displaying option to get images from Computer

Hello,
We have used "Rich text box" in Infopath Form which is not displaying option to get images from Computer.
Options available are : From Address, From SharePoint
But if we Rich text box in list, then it works fine with "From Computer" option.
can you please help me out to get this option.
Thanks in advance.
REgards,
Jayashri

Hi,
From your description, there is no “From Computer” option to get images with rich text box in InfoPath form.
Per my knowledge, by design there are “From Address” and “From SharePoint” options without “From Computer” option in rich text box in InfoPath form. As a workaround, you can develop a custom InfoPath Rich Text box to do it.
About developing a custom InfoPath control, I suggest you create a new thread on the forum “Visual Studio Tools for Office”, more experts will assist you with InfoPath development.
Visual Studio Tools for Office:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
Thanks,
Dean Wang

Calendar display options

How can I change the display options for iCal on an iPad Mini? I hate to always having to scroll in weekly view and would like to see the whole day without scrolling.

angelwoman,
Apple has not made that a feature of the iOS Calendar App.
You may want to consider providing Apple - iPad - Feedback.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

Sleep Display not staying asleep when encoding video

Hello,
I am looking for a way to turn the display off and KEEP it off with applications running as normal, until I want to wake it up. It is not always staying asleep.
I have a hot corner set up so that I can instantly turn my iMac display off (including the backlight). This works fine most of the time, but when running certain applications, activating sleep display works for a few seconds then stops working and the screen comes back to life.
Example applications which cause this are iTunes when encoding a video (e.g. converting a movie to iPod format), iSquint when encoding video, iDVD when encoding and burning a DVD - seems to be anything that makes heavy use of the processor.
I have tried all sorts of things to get around this:
1. setting the sleep display timer to 1 minute in the Energy Saving settings
2. 3rd party application and widget "Sleep Display" (http://linestreet.googlepages.com/home) which claims to make the display go to sleep and STAY asleep, suggesting "This version may work for people who experienced the monitor going off then coming right back on" - which indicates that it's not just me having the problem. This "Sleep Display" application doesn't work with Leopard though; the author acknowledges this and suggests he will update it if he upgrades to 10.5
3. different application - http://www.imalc.com/Site/SleepDisplay.html - this does the same as the hot corner and wakes up within a few seconds
4. sleep display tool in Dockables - same problem
5. "shades" system preference add-on, this makes the screen black and keeps it black but doesn't turn the backlight off
6. tried hiding the offending application, moving it to another space - nothing seems to work!
7. covering the imac with clothes - not ideal!
Thanks for your help!
Jim
P.S. the screensaver does stay on - so whatever is waking the sleep display isn't disturbing the screen saver - this suggests to me it's a bug. Obviously a black screensaver isn't the solution though - the backlight is still on.

I've got a very the similar problem. Brand new iMac 24" that shipped with Leopard -- my first Mac after jumping ship fom the Windoze side.
I had iTunes updating it's album artwork and since it was taking a while, I went to bed. When I turned out my light, I realized the screen had not yet gone to sleep (a good 15 minutes after it should have). So I set up a Hot Corner to put the display to sleep. When I put the mouse there, the monitor would go to sleep, but wake up within 10 seconds. At first I thought it was just the mouse moving as I walked away, but it wasn't.
I ended up turning the computer off because the big beautiful screen was throwing too much light. Since, I rarely turn my computers off and they're usually doing SOMETHING, this is really annoying.
Admittedly, I haven't tried some othe the potential solutions above, but this has to be the same bug. Screen saver stays on, monitor comes out of sleep.
Any help would be.....well.....helpful.
Ian

ITunes 7.0.1.8 Freezes Windows when Cover Browser display option selected.

When I select the Cover Browser display option for Music Library the entire operating system freezes within 3 seconds after the button is selected. After rebooting and deleting all music and selecting the option the freeze did not occur. I reimported a CD and tried again and the freeze occured again. ITunes works fine otherwise.
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro
Compaq Presario 2100 Windows XP Pro

I setup a new user on the computer. The problem does not happen under new user.

Document type wise PO with display & optional purchasing group.

Dear All,
we have six document type from NB1 to NB6 every document type has separate no ranges, & having three field selection as Me21n, fof, NBF,
in Spro MM Define screen layout at document level, in that we assign document type NB5 & attach field selection FOF in that purcahsing group is optional.
same other dovcument types we assign field selection Me21n & we assign purchasing group is Display option.
our requirement is that when i select documenyt type NB5, purchasing group will optional not in display.
But system shows display & we cant do PO.
Please guide me or any other config.
Thanks
Shital

Hi,
System is giving first preference to Field Selection Key ME21N, so you have to reverse the condition.
Maintain ME21N as optional and assign document type NB5 to it and
For other dovcument types Create another Field Selection Key with purchasing group as Display option and
assign that field selection key for purchasing group is Display option.
Regards

Document Display Options from portlet

How do I gain access to the user setting for the "Document Display Options" from a portlet? I want my portlet to honor this setting when creating links for the user to click on such that they open in a new window or in the main browser window as specified by this setting.
This option is set on the Display Options page of the My Account editor.
thanx!

Instead of using
<f:selectItem> use
<f:selectItems>.
Pass list to this componenet. is this your question?
Message was edited by:
KrishnaS

NO-DISPLAY option for Radio buttons

Hi All,
I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
my question was is it possible to use NO-DISPLAY option with radio buttons?
Thanks
Kumar.

See this sample code
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
*Radio button for Process PO invoice
PARAMETERS : rb_po RADIOBUTTON GROUP inv USER-COMMAND rad.
" PO Invoice
*Radio button for FI Invoice
PARAMETERS : rb_fi RADIOBUTTON GROUP inv.
" FI Invoice
*Radio button for Process PO & FI Invoice
PARAMETERS : rb_pofi RADIOBUTTON GROUP inv.
" PO & FI Invoice
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
 s_bukrs FOR rbkp-bukrs, "Company Code
 s_ekorg FOR ekko-ekorg NO INTERVALS MODIF ID md2,
 "Purchasing Org.
 s_ekgrp FOR ekko-ekgrp NO INTERVALS MODIF ID md2,
 "Purchasing Group
 s_werks FOR rseg-werks NO INTERVALS MODIF ID md2,
 "Plant
 s_lifnr FOR rbkp-lifnr NO INTERVALS,
 "Vendor
 s_matkl FOR ekpo-matkl NO INTERVALS
 MODIF ID md1,
 "Material Group
 s_belnr FOR rbkp-belnr NO INTERVALS,
 "Invoice Number
 s_ebeln FOR rseg-ebeln NO INTERVALS MODIF ID md2,
 "Purchasing Document No
 s_gjahr FOR rbkp-gjahr NO INTERVALS,
 "Fiscal year
 s_budat FOR rbkp-budat NO INTERVALS,
 "Posting date
 s_blart FOR bkpf-blart NO INTERVALS,
 " Document Type
 s_bldat FOR bkpf-bldat NO INTERVALS,
 " Invoice Date
 s_usnam FOR rbkp-usnam NO INTERVALS.
"User
*Report type
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for User Report
PARAMETERS : rb_user RADIOBUTTON GROUP za DEFAULT 'X' USER-COMMAND rad MODIF ID md2."User report
SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for Managing Report
PARAMETERS : rb_man RADIOBUTTON GROUP za
 MODIF ID md2.
"Management Report
SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
 MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
* Checking Radiobuttons and modifing Material Group field .
PERFORM f13000_check_radio.
FORM f13000_check_radio.
* When the FI button is selected hide the fields under group md1 and MD2
LOOP AT SCREEN.
 IF screen-group1 = 'MD2'
 OR screen-group1 = 'MD1'.
 IF rb_fi = c_x
 OR rb_pofi = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
* If the user output radiobutton is checked then make the screen
* input of Material Group off
 LOOP AT SCREEN.
 IF screen-group1 = 'MD1'.
 IF rb_user = 'X'.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
IF rb_user = 'X'.
* When display for material group is off
* then refresh the select option for material
* group
 REFRESH s_matkl.
ENDIF.
ENDFORM. " f13000_check_radio
hope this helps.

ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)

Hi, I'm En32, now trying to publish my first iBooks (epub).
The package I created is always rejected to deliver with following error.
Does anyone who can provide me a solution ?
=== error ===
Package Summary:
1 package(s) were not uploaded because they had problems:
 /Users/En32/Music/iTunes Producer/Playlists/10000448204.itmsp - Error Messages:
 Apple's web service operation was not successful
 Unable to authenticate the package: 10000448204.itmsp
 ERROR ITMS-9000: "Unable to parse apple display options file: com.apple.ibooks.display-options.xml" at Book (MZItmspBookPackage)
===
$ cat META-INF/com.apple.ibooks.display-options.xml
<?xml version=”1.0″ encoding=”UTF-8″?>
<display_options>
<platform name=”*”>
<option name=”fixed-layout”>true</option>
</platform>
</display_options>
===
Actually, I'd like to use fixed layout so I use com.apple.ibooks.display-options.xml.
This ePub file looks good because I can open it with my iPad - iBooks, however iTunes publisher always rejects this.
Any solutions ?

I was getting that error when I used OSX's default compress feature. I found a little utility called ePub Zip and used it to compress (zip) my ePubs and that did the trick. They then passed the validation. I got it here:
http://www.mobileread.com/forums/showthread.php?t=55681

Display Options in Acrobat X

Hi,
I'm looking to find the Display Option tab in Acrobat PDF Maker X but can't find it, specifically I want to be able to set Document Open Options. In Acrobat 5, there was a Display Option tab which allowed you to set Bookmarks and Page using a radio button and the Open Magnification from a drop down.
Are these options in Acrobat PDF Maker X?
Any information is appreciated.
Thanks

Hi,
Thanks for the reply. I was hoping that you could specify these options before you generate the PDF, you could do this in Acrobat PDF Maker 5.0
Date: Wed, 20 Apr 2011 13:34:37 -0600
From: [email protected]
To: [email protected]
Subject: Display Options in Acrobat X
You can set this options in Acrobat X. Look at the properties of the document.
>

When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons

I am using Oracle portal 9.0.2 version
When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons
Default Search Results Page
This Search Portlet
An unexpected error has occurred (WWS-32100)
User-Defined Exception (WWS-11230)
Unknown Exception (WWC-45131)
ORA-20101:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWPOB_API_PAGE", line 3369
ORA-01403: no data found
ORA-01403: no data found (WWC-11230)
No data found (WWS-32101)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
Error: An unexpected error occurred: User-Defined Exception (WWC-43000)
Please help me with this one
P.S I tried to run inctxgrn.sql, but it did not solve the problem

i solved the problem by runing 2 scripts as a portal user
You can refer to bug - 2418089. This was fixed in 9.0.2.3
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpageid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpagesiteid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
NOTE - The difference is the value of 'p_name' attribute. If u see carefully it is 'searchresultpagesiteid'. The first time u run this the value is 'searchresultpageid'.

Default display option in MB51

Hi Folks,
Can anyone help me in setting up a user specific default DISPLAY OPTION in transaction MB51.
Expecting an early reply.
T H A N K S,
Sugopa

Hi,
below link might help you
http://help.sap.com/saphelp_erp2004/helpdata/en/b5/2f2671d6f511d3b7f30000e82de955/frameset.htm
what is your requirement.
is this what you want when a user executes MB51 then the options should be default one if so
enter tcode MB51
go to system-user profile-set data and execute.
when ever you execute MB51 all the time the same data will be there.
is this your requirement if not getback......
if it helps and solves your problem reward points and close the thread
regards,
venu.

Sleep Display Option in 10.4?

Similar Messages

Maybe you are looking for