Sleep/hold button
my ipod touch hold/sleep button is not working i need it to restart so idk what to do i did'nt drop it to make it break or anything any suggestions?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My daughter tried to play the My Horse game on her Ipod touch that she got for Christmas and when she opened the game it said something about sending "push notifications" and gave the choice of "don't allow" or "ok"...we chose "don't allow". After that the screen went white and now we cannot get the Ipod touch to respond to anything. I tried holding the sleep/wake button to try to restart it and it doesn't seem to work. Any suggestions to get this device working again???
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, try a Restore:
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more that you can do. Post back if none of the above solves the problem.
By the way, I always allow "push." That allows the app developer to "push" information to your device rather than waiting for you to ask for it. However, "don't allow" shouldn't cause the problem that you're experiencing. -
My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
My app store is not working. I followed instructions to hold wake/sleep home button....did not work, I went into settings, general, reset network settings....didn't work...now what?
Did you try to go to Settings > Store, tap on Apple ID, Log out and Login again.
What message do you get when you open the App Store? -
My iPhone 4 will not power on. When connected to iTunes via my computer, it is recognized and shows fully charged battery. Pressing and holding the sleep/wake button does nothing; just a black screen. Any suggestions?
Only way is to bring it to the Apple Store and use the warranty if it hasn't expired
-
My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.
see here
http://support.apple.com/kb/HT1808 -
The i pod is disabled I cant conect to i tunes because it says to enter password. I have followed the steps to try a hard reset by holding down just the sleep/wake button or that and home button till the slidder bar showes which is not happening it has the lock symbol in the middle top screen of the red bar so i cant even get it to unlock.... any suggestions on how to shut this thing off so i can get it into recovery mode to reset it?
Try placing the iPod in ecovery mode and then restoring the iPod via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Next would beto wait for the battery to fully drain and the charge and try again. -
Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me
Doing those doesn't turn off your phone?
As stated hold down the top button only until you see the red slider to power off your phone.
If that doesn't work then take it to Apple and see what they say. -
My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.
- If you did not charge the iPod for a couple of hours before you did the reset then charege and reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and if iTunes sees the iPod restore via iTunes.
- Next see if recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last, make an appointment at the Genius Bar of an Apple store. -
my iphone 5 died last night while I was sleep. I have had it on charge all day and still has not came back on. I also tried to hold the sleep/home button. Is there anyway I could get my phone back on?
Did you try to connect in recovery mode, explained in this article?
If you can't update or restore your iOS device -
my phone is frozen and wont respond to holding the sleep/wake button and the home button how do i unfreeze it?
See Here for
Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting
HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again. -
email on ipad2 stopped working (frozen with no messages showing). Decided to reset the ipad via the sleep/wake button. Now all that appears is a busy symbol (white turning circle). Nothing works at all now.
Have you tried pressing and holding both the sleep and home buttons for about 10 to 15 seconds, after which you should see the Apple logo appear, and the iPad should reboot - you won't lose any content.
-
My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542
Is the iPad charged? Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.
Maybe you are looking for
-
Send An Internal Table Via Excel File As An Attachment of E-mail
Hi, I've sent my internal table via Excel file as an attachment of email but all records of internal table are in a row of sended excel file. How can i send an internal table via excel file , records of internal table for each rows of excel file,as a
-
CMYK to RGB color conversion?
Hi, I have to convert CMYK color array in the RGB color space and vice versa. I am using the following code;- UID colorUID = iDrawing->GetColorUID(kFalse); UIDRef colourUIDRef(iDrawing->GetDataBase(), colorUID); InterfacePtr<IColorData> colorData(co
-
I have one pic in iPhoto that won't appear in the iMovie lower right photos
Sometimes, a new iPhoto will simply appear for iMovie use. Sometimes I have to quit and restart iMovie for this to happen. But on this certain iPhoto, it just won't appear for iMovie, even tho I made a special album for it. That's blank, too. How can
-
Hi friends, We are facing a problem with one of our applications, that the session is pooling a number of sessions showing only 1 cursor and its not supposed to pool so many sessions from the application.. All these sessions show the below as current
-
Hi All , In most of my layouts the lead column is dynamic .For which I need to define VBA MACRO so that excel formulae are calculated properly . I am not that conversant with macro of excel .Can any body help me how to start with .If any documentati