Sleep + Home Doesn't Cold Reboot In 3.0 - How Do We Do It Now?
Used to be that holding Sleep and Home for 8 or 9 seconds would bring up the Apple logo and the 3G would reboot clearing all its memory, cache, etc.
With the new 3.0 update, this is gone. How do we do it now? I liked doing this every other week as I found the phone performed better with a little forced cold reboot
TIA
The red swipe is not what I'm looking for. There's another, deeper kind of reboot. Used to be prior to 3.0 you'd keep holding down the two buttons while the red swipe is on the screen (you don't swipe it) and eventually the screen goes black (keep holding those two buttons) and then the Apple comes back up. Only when you saw the Apple come back up did you release both buttons.
Similar Messages
-
my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do
Read
http://support.apple.com/kb/ht1808 -
My sleep buttom doesn't work how can i fix it?
i have a ipod touch and the sleep buttom doesn't work how can i fix it? thank you
Hi,
some people round here had success using a 'Standard DVD-cleaner disc' like the ones for Home Theater Systems.
Regards
Stefan -
My home button doesn't stop my icons wiggling! How do I make it work?, My home button doesn't stop my icons wiggling! How do I make it work?
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
-
My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?
Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo. -
Siri only works when I raise to speak, but when I hole down the hold button and Siri pops up, it doesn't pick up any sound. How do I fix this?
Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Set "hot corner" to put iMac to sleep. Doesn't work. Selecting the corner will momentarily put to sleep, but immediately rewakes. Have tried all four corners with same result. Have tried with wireless mouse and with corded mouse with same result. Any ideas as to how to fix?
You've been so great, I want to thank you for all the help over a very frustrating day. Last evening, I redownloaded and installed the fresh copy of Mountain Lion. The problem remained. After installing the new OS 10.8, any clicks on a web page (Firefox browser) didn't open the page, but instead made a copy of the page on the desktop. Felt it must be hardware degrading, so I set up a case with Apple support for today. Early in the diagnostics, I had swapped out for a corded mouse and the problem remained. As a last try, I changed out my wireless mouse for a different wireless mouse. That seems to have done the trick. My Logitech mouse is incompatible with OS 10.8.
Thank you again, so much!
.../awards rkaufmann87 500 points! -
My app store is not working. I followed instructions to hold wake/sleep home button....did not work, I went into settings, general, reset network settings....didn't work...now what?
Did you try to go to Settings > Store, tap on Apple ID, Log out and Login again.
What message do you get when you open the App Store? -
Turned phone off & now it won't turn back on (The Apple icon appears, then disappears).. After trying a cold reboot the itunes icon appeared, but phone still wont turn on. What should I do?
First try: Shut down Mac forcefully. Press the button to start & hold down OPTION ke once youo see white screen. Boot disk selection window will appear. From here select your drive to boot into Mac.
-
Wireless keyboard sk-2061 sleep key doesn't work. How do I get it to work?
The sleep key doesn't work on my HP SK-2061 wireless keyboard. How do I get it to work?
Hello @SunLovinGran,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your wireless keyboard's sleep key doesn't work. Is your computer able to enter sleep mode by itself after a certain period of time? Are you able to enable sleep mode using a different keyboard?
In the meantime, I recommend following the steps in this document on Wireless Keyboard and Mouse Troubleshooting. This should help diagnose any possible issue with how keys or buttons are input using your keyboard.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Toshiba 40TL838 - sleep timer doesn't work or working sometimes
Hi
I bought 40TL838 TV
and i have problem with sleep timer
doesn't work or working sometimes
but usually you can see on the screen one minute left and TV never switch off
i try change language and options also reset system doesn't help
and updates of firmware looks up to date
any suggestions or help pleaseIm not sure if you are on the right forum because this forum is for Toshiba computer systems but lets see if someone with the same device can help.
I dont know what is wrong there but how it works you can read on page 48 in Users manuals document.
By the way: have you tried to contact Toshiba hotline and ask for help? -
Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
will windows XP support Adobe PDFMaker 1.0 for Microsoft Word 97 (Final)? Windows 7 home doesn't and current Adobe programs pdf my 99 page Word 97 doc into a 108 page pdf. I need the PDF to be the same page count
Adobe PDFMaker 1.0 is very old.
-
my iphone 5 died last night while I was sleep. I have had it on charge all day and still has not came back on. I also tried to hold the sleep/home button. Is there anyway I could get my phone back on?
Did you try to connect in recovery mode, explained in this article?
If you can't update or restore your iOS device -
Home places + home doesn't work!
I've just set my wife's laptop up with Arch a few days ago and am having a couple of teething issues.
One is that Gnome's places/home doesn't work - I click it and nothing happens.
Any ideas how to troubleshoot or solve?
Thanks.Of course!
I have a 'home' icon plonked on the desktop and made visible in gconf editor which works fine - but cannot access it via the places menu.
Maybe you are looking for
-
Calculate percrentage based on a distinct value
Hi every one, I am trying to compute a percentage from a table which have got a strange format. here my example: ID Tribune Total Nomber 110 TRIBUNE OUEST 49 833 505 110 TRIBUNE OUEST 49 833 37 110 TRIBUNE OUEST 49 833 99 110
-
Btach split should not be considered in billing
Hi all, 1).I've created a sales order for 20 kgs. 2). Created delivery 10 kgs from one batch and 10 kg from another batch 3). i need to create invoice in a single line for 20 KGs without considering the batch split. In vov7 for the item category Tan
-
OWB 9.0.4.8.21
I am doing a simple mapping from a flat file to table(straingt 1 to 1, no transformations or checks). It gets validated , generated and deployed successfully, but while executing it it give me this error Starting Execution MAP1 Starting Task MAP1 RPE
-
New version of itunes is for losers
so after about 5 years of itunes working perfectly fine, i download the new version and find out some mid level lumberg decided to organize numbers AFTER z in my itunes, instead of before A like they always have been in the past. this ****** me off.
-
EHP5: changes to HRESS_C_CATS
Hi, How can I personalize the appearance of the timesheet (hiding columns) and rename the tabs (Att/Absence to Attendance/Absence) in the standard SAP Web Dynpro Components HRESS_C_CATS? Similarly rename the Save button as Submit? Thanks!