Sleep Indicator Light

My computer locked up and I had to shut it down by holding in the power button. It then would not reboot. I ended up having to reinstall my operating system. Since then my sleep indicator light doesn't work. My computer goes into sleep mode, but the indicator light doesn't come on or flash. Anyone know how I can get the light to start working again??

Thanks for giving me the suggestion. I didn't get the opportunity to try your solution though. We had a power failure due to a storm today and I unplugged my computer. When I plugged it back up I decided to plug it into a power surge protector. When I booted the computer back up the light came on.

Similar Messages

  • After upgrading to Mac OS 10.6.8, sleep indicator light remains off when I start my MB Pro

    After upgrading to Mac OS 10.6.8, sleep indicator light remains off when I start my 15" MB Pro, but the computer works, and when I put it to sleep, the light flashes as normally. Any suggestions?

    Hi j,
    An SMC Reset can fix some SIL issues. If everything is working fine . . . ? Anyway, it shouldn't hurt anything to try it if you want: http://support.apple.com/kb/HT3964

  • Sleep indicator light not working

    This isn't really that huge of an issue, but I've noticed that the sleep indicator light on my 366MHz Firewire iBook, which I recently bought on eBay and installed a few upgrades in, seems to not be flashing when the computer is asleep. At first I suspected a bad LED, so I swapped it out with a known-good indicator light from my previous 300MHz iBook. That hasn't seemed to work, and both display cables going into the motherboard appear to be securely attached. Oddly enough, I do recall one time when I put the computer to sleep and the indicator light worked (this was somewhere in the middle of my trying to get it to work), but I haven't been able to replicate it.

    Have you tried to reset the Power Management Unit (PMU)?
    http://support.apple.com/kb/HT1431?viewlocale=en_US

  • Sleep Indicator light stopped working- any way to diagnose and resolve thi

    The Sleep Indicator light on my Powerbook G4 12" 1.5Ghz has ceased to work. Just wondering if this is a sign of anything other than age and if it is possible to resolve at all?

    This was a bit of a non issue it turns out. For some reason it started working again! The light has come back on! Not sure what happened there.

  • Has anyone had any issues with the sleep indicator light?

    I have a 15.4-inch MacBook Pro 2.8 GHz (Late 2009) and recently I have noticed some issues involving the sleep indicator light and my Mac sleeping.
    I learned that the sleep indicator light is supposed to be on when you press the power button until the chime sounds and then its supposed to be recognized when the computer sleeps or when the lid is closed.
    Lately, the sleep indicator light has not be working when the computer boots (it still chimes), when the computer shuts down or when the computer is sleeping. The computer still sleeps if you close the lid, but it acts up when you don't and use the Apple menu (Apple > Sleep), keyboard shortcuts (CmdOptionMedia Eject) or use the power button and select "Sleep". Usually when I use this method instead of closing the lid, the authentication login window appears and when I click "cancel", the computer sleeps.
    But still the sleep indicator light does not appear any time. I'm wondering if I need to get my Mac serviced. I still have a 2-year Best Buy Geek Squad warranty on the MacBook Pro.
    +It is weird that this is happening to me, cause my computer is only 1 year and 4 months old.+
    Is there anything you know that would help fix this issue.
    Message was edited by: studabaker
    Message was edited by: studabaker

    The microUSB cables are fairly common... most portable electronics today use them for file transfer/charging.
    If the user does not own one, they can be purchased from most retailers fairly inexpensively.

  • Sleep Indicator Light Adjusts to Ambient Light?

    I just noticed in the last few days that the sleep indicator light on my UMBP actually pulses brighter/dimmer according to ambient light, even when the lid is closed and computer is asleep. Am I imagining this? How could this work?

    I don't want to alarm you, but this is what was happening with my previous generation macbook pro 17, it turned out to be a sleep problem (would wake up when moved, or in bag) They replaced the lcd, the clamshell housing, top case, bottom case, logic board and left I/O board to no avail. Luckily I was still within my applecare, so it was replaced with a unibody. I would suggest that you take it in to the genius bar, they may try to tell you that it's some firmware update and that its supposed to do that now, but my new mbp sure doesn't do this, so I think they were just trying to get rid of me, but who knows.

  • MBP won't start or read from optical drive; steady sleep indicator light

    MBP went into sleep mode at some point during the day. Now I cannot wake it up. I had a steady sleep indicator light. I've tried everything in the book (holding down pwr button to shut down, then restarting; reset power manager; tried rebooting with OS disc #1 installed - which now will not eject).
    When I press the power button, I can hear the optical drive start to turn, then it stops short. The drive will spin for awhile, then stops automatically. The computer fans come on, but that's about it. I can't reboot so as to run Disk Utility. The screen remains black. Starting with shift key pressed for Safe mode or pressing C also have not worked. Seems as if the computer is not getting passed the initial start up sequence. My wife also has a MBP but I haven't tried reading my computer via Firewire yet. Not sure that will help.
    I'm a long way away from any Apple store (Kazakhstan) and would greatly appreciate some help. Thanks! Scott

    This problem has been resolved. Problem was a faulty RAM module. I sent my MacBook Pro to an authorized service center; they had it fixed in less than 1 day. Works fine now. No problems since!

  • ACD sleep indicator light not pulsing

    I installed Windows Vista Home Basic on my Mac Pro yesterday. My display is a 20" ACD (aluminium).
    Since this Vista installation, the indicator light on the ACD does not pulse during sleep, but remains on steadily. The front indicator light on the Mac does pulse as normal during sleep.
    In both instances, this indicator light is off as normal on both the Mac and the ACD while the Mac is being used.
    Is this an issue others have seen, and does it have any negative indications?

    In Displays/Option, the Display Power Button preference had been set to 'Turns the display on and off' and this had caused the problem I described earlier. I am not sure why this option had been selected after the installation of Vista yesterday, because I didn't open Preferences during or after this installation.
    I have now changed the option to 'Puts the system to sleep or wakes it'. This is the option I normally use and I was not actually aware it caused the display sleep light to pulse.
    The display has now returned to the more usual state (for me) of gently pulsing.
    Thank you, Malcolm, you have been very helpful.

  • MBP won't turn on (sleep indicator light is flashing)

    I just bought a new MBP. I was downloading from my USB stick when the laptop suddenly died. It won't turn on now. When I press the power button, the sleep indicator starts flashing incessantly.
    I tried the stand technique of taking out the battery, removing the AC plug, and holding down the power button for 5 seconds. Nothing.
    Any ideas?

    I'm having this same problem. I'm an alaskan, so my view of heat may be skewed, but my laptop was sitting in the car for about 30 minutes here in montana - I really hope the heat didn't damage my brand-spanking new MBP )-:
    I have a built-to-order MBP with 2GBs RAM, boring old high-quality apple standard RAM, so I don't think that's the problem ^^/

  • Sleep indicator light not working after upgrading to Snow Leopard

    Hello all, I recently upgraded to Snow Leopard on my mid-2007 Macbook Pro (Macbook Pro 3,1, 2.4Ghz Core 2 Duo, 4GB RAM) and after the upgrade the sleep light no longer comes on when I shut the lid or when the display is powered off.
    Not a huge deal, but might be an issue if I can't remember if I shut the computer down or put it to sleep last—I did not do a clean install, but would anyone happen to know something I could try before resorting to that?
    Thanks, your help is much appreciated!

    Have you tried Resetting the System Management Controller (SMC)?
    cornelius

  • Sleep Indicator Light (SIL) not functioning

    Hello,
    I own a Macbook Pro 13" (Mid 2012 model).
    The unit was purchased in March 2013.
    However, I notice that the indicator of sleep (SIL) no longer works, and that already a long time.
    Not when starting up the macbook, not when the macbook is brought into sleep mode.
    This is the case both with OS X 10.8 (Mountain Lion), 10.9 (Mavericks) and 10.10 (Yosemite).
    For problems with SIL Apple recommends to do an SMC reset.
    I've done this, without success.
    Other suggestions / tests that can help me to solve the problem?
    Kind regards.

    Have you tried to reset the Power Management Unit (PMU)?
    http://support.apple.com/kb/HT1431?viewlocale=en_US

  • How can I turn off the pulsing Sleep Indicator Light?

    I swear I remember seeing this option somewhere when setting the computer up initially. I'd rather the light be off when charging, or at least steady on. The pulsing is lighting up my whole bedroom.

    Can't do it with normal sleep. Use tape or put an object in front of it.

  • Sleep Indicator Problem when Powering Down MacBook

    When I power down my MacBook Pro and close the laptop, the sleep indicator light comes on. It does not pulse like it does when the machine is asleep, it stays constant. Then when powering the computer back on, the power button is unresponsive and needs to be held for a moment in order to turn the computer back on.
    I tried unplugging the computer while I was away from it, and after a couple of hours the sleep indicator was off and the battery was completely drained. After plugging the computer back in, it booted up like normal.
    I usually turn the computer on when I get home from work, and turn it off before I leave for work in the morning. So, the computer is usually off for about 10 hours a day. Also, I usually cycle the battery once or twice a week to keep it from dyeing on me. I have owned the computer now for about two years and keep all the software and security packages up to date. If anyone has input, it would be much appreciated. Thanks.

    The LED light comes on only after I close my laptop, it doesn't turn on until the top is closed. I always close the laptop after I turn it off though, I haven't tried leaving it open after turning it off. And I usually give it about a minute or two to completly shutdown before I close it up for awhile. By holding down the power button to turn the computer on, is that considered a forced shutdown?

  • Sleep Indicator won't Wake

    My sleep indicator light recently ceased glowing while the computer is on and awake. However, it works perfectly when the computer is asleep and/or the lid is closed. It stopped during a pause in a downloaded iTunes rental. After attempting a reset of the power module (directed by apple care representative), the problem was not corrected.
    I was then directed to an apple store/best buy to get the hardware checked out. Apparently the apple guy only works five hours a day so the problem remains unresolved. I did notice; however all the other display macs in the store had the same problem.
    Is this an intentional result of an upgrade, or a goof in some new firmware?
    I have not yet reset the firmware; however, I have been considering it as a possible next resort. Any feedback?

    I've got the same problem.
    The status/sleep light is no longer on when the computer is awake, unless the display is asleep, in which case the indicator light is fully lit.
    When the computer is asleep, the indicator light flashes as it should.
    This has just started happening since I installed Adobe Photoshop Elements 6 this morning.

  • After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

    After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

    Regarding your new Guest Account.
    If it is the Guest User created by Find My Mac, it is advisable that you leave it be in order to maintain the functionality of the Find My Mac system. It is not a typical guest account. A person can't use the account to log into the system. It only permits the user (presumably a thief) to use a crippled version of Safari, in which the thief will reveal his/her location, hopefully to an end result wherein you may be able to recover the stolen computer.
    The very nature of this unique guest account is to increase the security of the system, not to degrade it as a typical guest account might do.

Maybe you are looking for

  • Scripting: what can be done, what can't...

    Hello all, I have recently started the process of asking for InDesign Server. Before I complete this process, I would like to know whether Scripting for InDesign is the right way to go. Basically, I need to create an app that will: 1. Collect multi-l

  • Broken linux installation and not working start windows 7

    Ok so lets try it again. I have my Win 7 Home premium - given with new computer. So, how can i change bootmanager or bootpartition? Some guy here told me it will help. Can someone tell me it step by step- my windows doesnt start. What happened? I ins

  • Initialisation data load failure

    Hi all, My initialisation data load for 0EC_PCA_3 failed with an error message "Selected No does not agree with transferred no." , the data processing is ok. I am pasting the shrot dump from the source system below. Error analysis                    

  • Macbook pro running extremely slow, help please!

    Problem description: Running slow EtreCheck version: 2.1.8 (121) Report generated April 12, 2015 at 11:30:16 AM CDT Download EtreCheck from http://etresoft.com/etrecheck Click the [Click for support] links for help with non-Apple products. Click the

  • Parse multiple items in a field.

    I have a field that contains many part numbers. There can be 2 or more part numbers in the field separated by a space. How can this be dynamically read so you can compare the contents in the where clause to what you are search for? Example Part Numbe