Sleep mode not working properly in windows

I have a P67A-GD65 working fine (THANK GOODNESS!) but I have a small annoyance.. It wont wake up from sleep mode unless the power button is pressed! How can I change this to wake up on say, when I click a button on my mouse or my keyboard or even move the mouse? I have the latest bios installed. Thanks!

 Depends if you have USB or PS/2 KB/mouse
  Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3 (Suspend
to RAM) sleep state.
  Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These items determine whether the system will be awakened from what power saving
modes when input signal of the PS/2 mouse/ keyboard is detected.

Similar Messages

  • Sleep mode not working properly on Macbook Pro

    On my Macbook Pro everytime my mac enters sleep mode just the display goes to sleep never the system even after 8 hours. Checked the energy saver setting both display and computer are set to ten minutes. I can also never get the display to wake back up unless i do a hard reset. Any ideas? Thanks!

    Does it now work only on battery? or using the power supply?
    If only on the power supply use a grounded plug.
    Otherwise try reseating touchpad cable. Post the size and year of your MBP.

  • Flash player does not work properly on Windows 7 32 bits

    Hello,
    My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
    My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
    I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
    In fact, it works correctly on some sites, like youtube, but not on some others like :
    http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
    http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
    http://www.myspace.com/ => no audio player, right click gives flash context menu
    some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
    I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
    No problem too with flash player on http://www.adobe.com/software/flash/about/
    But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
    I cannot check boxes,
    My changes are not saved.
    In most of flash animations, videos, ...,
    when I click on parameters, I cannot do anything, even closing.
    when I am in full screen mode, the message "press escape to exit...." does not disappear.
    Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
    Thank you for your help

    Hi eidnolb
    Thanks for your answer.
    This is what I have :
    Verify user permissions
    I have an administrator account.
    I tried (uninstall, install and run) with super-administrator account for same results
    Install the most current version.
    I am running the latest version (10.0.45.2)
    Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
    I did not "clean" my computer.
    Troubleshoot Pop-up blockers
    I have no Pop-up or esle blocker  software.
    Ensure that Internet utilities do not block Flash Player
    I tried (uninstall, install and run) without Avast.
    I have windows 7 firewall. I do not know where I can allow ActiveX  controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
    Fix machine crashes when displaying Flash content
    I have no freez or crash.
    Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
    Using FF, I have SWF vs  10.0.45.2 and it is Enabled
    I really do not understand !!
    Thanks,
    Ju'

  • Windows 10 sleep mode not working

    windows 10 sleep mode not working

    I hope this helps. But... I had the same problem last week. Now I don't as of 8/17/15. I am not sure if a windows 10 update fixed this. I do not like problems that without any assistance fix themselves. However, try sleep mode again. This problem may have been fixed.

  • Gadgets not working properly in windows 7

    For some reason the gadgets in windows 7 are not working properly. I can open the gadget gallery and select a gadget, but it doesn't show the entire thing. For example i select the clock, and all it shows is a black square with the red ticking hand frozen. Another example is the CPU meter. All it shows when i click on it is a little white square where the meter should be. I can still close the gadgets by way of the close button on each gadget though (the calendar doesn't appear at all).  UAC is turned on and i have rebooted the pc, same thing still happening. (It is Enterprise edition if that makes any difference). If anyone could help that would be great!

    Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
    white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
    x to close does. Here are some screenshots:
    The above-mentioned behavior is caused due to the following reasons:
    A subkey with foreign/ASCII character exists under the "Zones" registry key.
    XML registration is missing in the system.
    Use these steps to fix the problem:
    Fix for Case 1
    1. Click Start, type Regedit.exe and press {ENTER}
    2. Navigate to the following branch:
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
    3. Under the Zones key, delete the subkey shown with an ASCII character:
    4. Exit the Registry Editor.
    5. Logoff and login back to your user account.
    Fix for Case 2
    1. Open an
    elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
    right-click Command Prompt, and then click Run as administrator.
    2. In the Command Prompt window, type the following command and press ENTER:
    regsvr32 msxml3.dll
    3. Similarly, run these commands:
    regsvr32 scrrun.dll
    regsvr32 jscript.dll
    You should see the DllRegisterServer in <filename> succeeded message for each command executed.
    4. Logoff and login back to your user account and see if the Gadgets display correctly.

  • Lenovo s10 3t sleeping mode not working???

    I just received my lenovo ideapad 2 days ago and upgraded to ultimate.. my problem is , even before i upgraded it and it was on windows starter, whenever i put on sleeping or hibernate mode, it actually SHUTS DOWN? after putting/thinking it was on sleeping mode, i tried to turn it on again, hoping that it will go back to where it was before., then i realized, i have to go on the safe mode or start normally coz it said it didn't properly shuts down. BUT i didn't even shut it down.. i only put it on sleeping mode.. why is it so? anyone have the same prob? or am i pressing the wrong button (the power button) in order to turn it back on from the sleeping mode.. it really bugs me that it always kinda restarting when it is supposed to be asleep!!! i changed the power setting to having the sleep mode longer than an  hour and tested it within few minutes by putting on the sleep mode and try to put it back on, it still goes into computer not properly shut down ---> safe mode or start normally window thingy.. what is wrong here???
    HELP PLEASE.. thanks a bunch..
    Solved!
    Go to Solution.

    Hi and welcome, did you install Lenovo Energymanagement there are some points to configure...
    here an excerpts of my article... .. the settings .. way gettin in
    Energy Management -->advanced tab
    Section options  check Enable Hibernation check Auto adjust schemes according to battery power
    Sectionower buttons  When I close the lid of my portable computer  choose Stand By
    When I press the power button on my computer  choose Shut Down
    When i press the sleep button on my computer (Hint: on S-Series Fn-F1)  choose hibernation
    sincerely KalvinKlein
    Want more ? For further information to get the most of your S-Class machine
    Lenovo Energymanagement   Backup  Windows 7 Driver   Windows 7  Install
    Clean XP Install  XP Startup  Small WebCam Guide  Lenovo Easy Capture
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • DVD-Rom drive in Satellite C655-S5128 not working properly in Windows 8

    I recently upgraded my system from Windows 7 to Windows 8. However, the DVD-Rom drive after the upgrade no longer works properly -- it now treats the pre-recorded disk as if it was completely blank. I tried reinstalling the Toshiba Disc Creator, but that did not work.
    Any solution?

    You apparently did not use the Toshiba Upgrade Assistant in upgrading to Windows 8.  See HERE for DVD and Disk Creator problems occurring during the upgrade and solutions.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Stand-by / sleep mode not working when USB is connected

    Hello!
    When the USB cable from my 24" LED Cinema Display is connected to my new Mac Pro 2,66 GHz Quad-Core, the stand-by / sleep mode does not work correctly: the Mac Pro goes to sleep normally, then the LED behind the on-/off-button flashes one time and then the Mac Pro awakes from sleep mode without any user interaction.
    I already tried to reset PRAM, I tested all three rear-side USB connectors (I did not test the front-side USB connectors because the display's cable is way too short), I unplugged all other USB and Firewire devices and also tried sleep mode from a freshly created account. Alas, nothing helps.
    As soon as the display's USB connector is plugged in, sleep mode does not work any more. It even doesn't matter if there are USB devices plugged into the display. Without connecting the display's USB plug, sleep mode works fine.
    So, any ideas out there?
    Thanks in advance & best regards!
    Mario.

    I fixed the problem, so I just post this to help others that might run into the same trouble.
    The Mac Pro and the display were connected to a master/slave power socket. The problem is: when the Mac Pro goes to sleep, there still seems to be some power left in the display (which socket is switched off by the master/slave power socket). Therefore, the display goes off slightly after the Mac Pro. This powering off seems to release a signal on the display's USB wire that is connected to the Mac Pro and therefore switches the Mac Pro on again.
    So, this is the same effect as removing a USB device from the Mac during sleep mode, what (at least in most cases) also starts up the Mac again.
    As a result, there seems to be no other solution to this problem than removing the display from the master/slave power socket. Sadly enough, the LED Cinema Display consumes other 2 watts in stand-by mode...
    Cheers!
    Mario.

  • LSMW in background mode not working properly

    Hi,
    I am doing LSMW in background mode. But I am facing problem in SM35. The session is ended with sessions.
    Wt I am trying to do here is: I have 4 fields on the screen in which 4 th field is non-editable field.
    I am concatenating first 3 fields and storing in 4th field and storing in a table.
    In the foreground ..I have no problems. LSMW is working properly and there no logs in SM35.
    But however if i run the session in background, It is showing as 4th field is not a input field.
    Thanks

    This is the output of journalctl --all
    May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
    May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
    May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
    May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
    May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
    May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
    May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
    May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
    May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
    May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
    May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
    May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
    May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed.

  • Toshiba DVD player is not working properly since Windows 7 upgrade

    I recently upgraded to Windows 7 and can no longer get my Toshiba DVD player to work.
    I have tried updating drivers, uninstalling and reinstalling. Also, I tried to download a Realtec driver meant for Vista from a suggestion on another thread and that was even worse. It is currently uninstalled, but when I install it, it either doesn't play at all or I get an error saying that it can't connect to the output device.
    Has someone experienced a similar problem on Windows 7?

    I have the same problem - I have upgraded my new Toshiba satellite L300-29V and the Toshiba DVD player wont work. The error message I get is "modules needed for this application are missing - if restarting does not work then re-install application" - I don't know how to reinstall - supposedly the application is on a partition on my hard drive but I dont know how to get at it. Any suggestions please?
    Tim

  • Usb not working properly in windows 7 x64 (890FXA-GD70)

    Hi,
    I am currently having problems with my USB ports.  A select few ports are not working.  In the device manager, windows claims to have not started up related drivers.  I tried fixing this by updating the drivers from the msi page.  This caused all the usb ports to stop working.  I am not sure what the problem is but however it does seem isolated to my windows 7 x64 install.  My keyboard and mouse still work in bios, but not once windows 7 starts up.  The keyboard and mouse also work when I use the system disk to restore back to a system checkpoint.  I am at a loss as to what could be causing this or how to fix it when the drivers supported are failing me.
    Any help would be appreciated. Thanks.
    Chris

    Quote from: Bas on 19-November-10, 22:57:34
    Those few need extra drivers.
    As they are USB3.0 ports: http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=2025
    Yea as I stated earlier, after installing these drivers all the usb ports stopped working in the current windows 7 install.

  • 10.7 not working properly in windows 7

    Hi,
    I have windows 7 32 Bit OS. I had downloaded 10.7 just now & installed it.
    It opened first time. but later on every time i try to run itunes, it says "iTunes has stopped working".
    A Problem caused the program to stop working correctly. Windows will close the program.

    Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
    white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
    x to close does. Here are some screenshots:
    The above-mentioned behavior is caused due to the following reasons:
    A subkey with foreign/ASCII character exists under the "Zones" registry key.
    XML registration is missing in the system.
    Use these steps to fix the problem:
    Fix for Case 1
    1. Click Start, type Regedit.exe and press {ENTER}
    2. Navigate to the following branch:
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
    3. Under the Zones key, delete the subkey shown with an ASCII character:
    4. Exit the Registry Editor.
    5. Logoff and login back to your user account.
    Fix for Case 2
    1. Open an
    elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
    right-click Command Prompt, and then click Run as administrator.
    2. In the Command Prompt window, type the following command and press ENTER:
    regsvr32 msxml3.dll
    3. Similarly, run these commands:
    regsvr32 scrrun.dll
    regsvr32 jscript.dll
    You should see the DllRegisterServer in <filename> succeeded message for each command executed.
    4. Logoff and login back to your user account and see if the Gadgets display correctly.

  • Whatsapp not working properly in windows

    Developers please try to fix the problem for whatsapp first because it the the most important application we find. The messages are delayed and does not show immediately, we cant sent videos and music on whatsapp. Many people refrain to buy Nokia windows phone just because of this problem. There are lots of problems in whatsapp too

    Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
    white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
    x to close does. Here are some screenshots:
    The above-mentioned behavior is caused due to the following reasons:
    A subkey with foreign/ASCII character exists under the "Zones" registry key.
    XML registration is missing in the system.
    Use these steps to fix the problem:
    Fix for Case 1
    1. Click Start, type Regedit.exe and press {ENTER}
    2. Navigate to the following branch:
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
    3. Under the Zones key, delete the subkey shown with an ASCII character:
    4. Exit the Registry Editor.
    5. Logoff and login back to your user account.
    Fix for Case 2
    1. Open an
    elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
    right-click Command Prompt, and then click Run as administrator.
    2. In the Command Prompt window, type the following command and press ENTER:
    regsvr32 msxml3.dll
    3. Similarly, run these commands:
    regsvr32 scrrun.dll
    regsvr32 jscript.dll
    You should see the DllRegisterServer in <filename> succeeded message for each command executed.
    4. Logoff and login back to your user account and see if the Gadgets display correctly.

  • ATI driver not working properly on windows xp

    hello sir,
    i have a problem and hope you can fixed it for me. the problem is, when im installed windows xp on my laptop. only Intel hd driver working but the  ATI driver is not working ( not detetcted when done install driver). im trying install driver manualy, but still  not working. So i dont know if ATI driver only used for window 7 or both. im used
    G470 model 20078 
    Intel (r) celeron(r) CPU B800 @ 1.5GHz
    tq

    Welcome to the forum!
    Did you install the Windows XP Chipset Driver for your model prior to trying to install the Ati driver?  The chipset driver must be one of the first drivers installed so that the operating system can correctly identify the rest of the installed hardware for their driver installation.  Once the chipset driver is installed, reboot and then try installing the Windows XP version of the Ati driver.
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Sleep mode not working after iMac WLAN Update 1.0

    Hello,
    unfortunately the sleep mode isn't working anymore after the latest "iMac WLAN Update 1.0" update.
    Usually I press cmd+alt+eject to activate the sleep mode, since the update the screen switches off (black) for a second and immediately turns on again. Fans and HD keep running without any interruption.
    Same behaviour if I use the "sleep mode" command from the Apple menu, except the screen turns off and keeps off, but fans and HD are still running.
    The iMac never activates the sleep mode by itself (e.g. after 15 minutes), this also a new "feature" which occured after the update.
    Is there anyone recognizing the same problems? Any hints how it can be solved?
    Thank you very much in advance,
    Oliver

    I finally found the solution in a German newsgroup. First: It has nothing to do with the "iMac WLAN Update 1.0" .
    A unsuccessful printer job caused the problem and just open the CUPS site http://127.0.0.1:631/jobs and delete the hanging job solved the problem!
    Thanks,
    Oliver

Maybe you are looking for