SLEEP MODE PROBLEMS!!! HELP!

Is there ever going to be an update for mac os x v10.6.4 snow leopard that fixes the slow sleep problem? Since the update my macbook takes 45 seconds to go into sleep mode after I click on sleep in the top left corner. Is there any other option other than waiting for a new update?

As I've just learned, this is a matter of what hibernation mode your model uses.
See here: http://www.macworld.com/article/53471/2006/10/sleepmode.html
With this terminal command you can see what your machine uses:
pmset -g | grep hibernatemode
For fast sleep, it should be 0.
My problem is, however, that my Mini Mac keeps waking up from sleep. Very annoying.

Similar Messages

SOLVED : Lenovo X60 spontaneous sleep mode problem.

The problem is the flat panel screen! (either t-conn board and/or backlight). Viewiz HV121X03-100 Part No. 42T0359 FRU No. 13N7205. LCD : Wistron P/N:60.4Q443.001
I have 2 identical of Lenovo X60 laptops, with swivel-type-hinge at center. One has this spontaneous sleeping mode problem. I thought it was the Inverter problem - WRONG. Next some say it's the motherboard, CPU fan & heatsink, BIOS updates wrong also. All of these assumptions and theories are wrong diagnosed.
Solution replace the flat panel screen (very expensive because it has Wacom digitizer glass on top of the screen and board at the bottom.)
Roan
Computer Technician
Chapel Hill, NC

Hello @Tilia,
I have read your post on how your notebook computer is experiencing an issue with waking up from sleep mode, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues in Windows 8. This should help configure your power management settings to effectively use sleep mode on your system.
Additionally, you can also restore your notebook's default power schemes by following the steps below:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Sending a bug report on the OS and a sleep mode problem.

I find the bug button in Safari really convenient for sending Apple bug reports. And when other applications crash, you usually get an error dialog with a button to send a bug report. But sometimes problems arise that require reporting, but which don't fall in either of these categories. It would be very handy to have a bug "button" for the OS, or perhaps just a menu selection in the Finder menu bar that invokes a bug report dialog box. I know you can dig around and find the URL for Apple's bug report web page, but I am always forgetting it -- I suppose I could just bookmark it, but then I'd just have to dig around in all the bookmarks to find it. Better would be a utility built-in to the OS for sending bug reports (like Safari's). It could also automatically transfer necessary info about the OS rev and such.
The problem I had was this. I have a script that puts my iMac to sleep. I put the script alias on the task bar and a single click puts the computer to sleep (easier than using the menu). Unfortunately, I sometimes click it by mistake when I am trying to click an adjacent icon in the task bar, and the Mac starts going through its cycle to enter sleep mode and is impervious to anything I do to try and cancel it. I tried pressing the space bar continuously to prevent it from going to sleep, but that did not work. Worse, when it went to sleep and I woke it up again, the task bar would not appear, clicking on app windows did not activate them, Finder menus could not be selected, etc. The cursor would move, but I could not do anything else. (I wish now I had noted if the clock in the menu bar was still advancing, but I didn't think to do that.) I powered down the iMac from the power key and rebooted. Things are working fine now.
I wanted to send a bug report on this, but realized that unlike Safari, there was no button or menu selection for doing that. So here I am.
Any suggestions are welcome.
TIA,
Drake

[email protected]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My ipad doesn't seem to make a sound when it is closed or in sleep mode to let me know there is an imessage until you see it on the screen that someone has imessaged. When you're taking it makes the swoosh sound, just not when it's in sleep mode. Help

Am having some problems with the sounds on my ipad, specifically my imessage notification sound when your ipad is in sleep mode and someone is messaging you. It seems to work with the swoosh sounds when you are actively messaging back and forth, but as soon as I close my ipad up and is locked or in sleep mode, I don't know anyone is messaging me until I look at my ipad. I've tried a few things.. But nothing has worked so far....Please help!

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

T400 sleep mode problem

Hi, I got my new T400 last week, prett happy. However, I found an annoying problem with T400 entering sleep mode. Randomly, it fails to go into sleep mode. It just hangs there with no response at all from keyboard and mouse, the "sleep moon" light doens't turn on either. I have to hold the power button to forcely shut it down and reboot. Quite annoying.
I did some research on this forum, somebody suggested reinstall the Power Manager and its driver, I tried that and the problem remains. BTW, My video driver is also up to date.
Then I called Lenovo/IBM Atlanta support team, and was told to try to update my BIOS. So I preceeded with that too. Because I have Vista64, I have to download an iso image and burn a bootable CD with Roxio Creator (preinstalled on T400), and changed the BIOS startup sequence to boot from the internal CD drive. Somehow, T400 couldn't boot from the CD I burned with the BIOS update iso image. So I am back to suqare one.
Someone in this forum also suggested it might be a motherboard problem, but the tech rep I talked with didn't mention that.
Any suggestions on this sleeping mode issue? Or if you could help with the bootable CD with BIOS update? Thanks in advance!
(The BIOS update iso image is here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70351)

svchw wrote:
Then I called Lenovo/IBM Atlanta support team, and was told to try to update my BIOS. So I preceeded with that too. Because I have Vista64, I have to download an iso image and burn a bootable CD with Roxio Creator (preinstalled on T400), and changed the BIOS startup sequence to boot from the internal CD drive. Somehow, T400 couldn't boot from the CD I burned with the BIOS update iso image. So I am back to suqare one.
Any suggestions on this sleeping mode issue? Or if you could help with the bootable CD with BIOS update? Thanks in advance!
(The BIOS update iso image is here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70351)
Sorry, I have to ask the usual iso burn question: are you burning it as a file, or as an image? If your cd is readable under windows (or whatever) and has a file on it called xxx.iso, you probably used the wrong burn option.
No offense, but this is the usual problem. If you are already handling this, sorry about the noise...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

G4 sleep mode problem after latest update (10.5.8 build 9L30)

Hi,
My 'old faithful' 17" G4 PowerBook 1.67GHz behaves differently after the latest SW update to 10.5.8 build 9L30:
When ordered to go to sleep mode (german: "Ruhezustand") either by Apple-menu command or closing the display does no longer result i slowly flashing white standby-LED but the LED remains dark and the PowerBook will not resume when the display is flipped open again or the power-button is pressed.
It can only be reactivated with <ctrl><apple><power-button>.
Before that, it behaved as expected i.e. resuming operation after flipping the display open again or pressing any keyboard key when in power save mode.
The behaviour is the same if operated without attached power supply.
Any idea?
Thanks in advance
Ulrich
update log:
2011-06-24 16:56:41 +0200: Installed "Sicherheitsupdate 2011-004" (1.0)
2011-06-30 20:52:43 +0200: Installed "Java für Mac OS X 10.5 Update 10" (1.0)
2011-08-04 12:06:12 +0200: Installed "iTunes" (10.4)
2011-08-04 12:07:41 +0200: Installed "QuickTime" (7.7)
2011-08-04 12:08:33 +0200: Installed "Safari" (5.0.6)

O.K., after some more tries I toggled all settings in the power management.
Even the settings are now exactly the same as before, this solved my problem!
Maybe this info can be helpful to other MAC users in the future...

Shut down without warning @ 30% , firewire not working , sleep mode problem

Hello!
I seem to have a combination of problems in which I believe that somehow they must be related altogether. I would appreciate any advice you may have on the cause of these problems and/or any solutions. Here's a detailed list of the problems:
1. The computer shuts down without warning at about 30% battery.
2. The Firewire doesn't seem to work when I try to connect my external HD.
3. The firewire Bus data is not shown on the System Profiler.
4. The sleep mode doesn't work; if I press the "sleep" icon, it doesn't respond to it.
5. When I close the lid and open it again, the screen remains turned off which requires me to force shut down the computer every time. Yet, it seems that its only the screen that does not want to come back up, the unit seems operational.
6. The sleep light indicator does not pulse when lid is closed, it stays on.
Actions taken:I have tried resetting the Power Management Unit (PMU) to no avail. Have the battery update. Have reset the PRAM.
Thanks in advance for any help!

Temp: (on start-up in regualr mode, about 2 minutes from boot up)
AMBIE: 25ºC
CPU A Heatsink: 31ºC
CPU A Proximity: 35ºC
CPU A Temperature Diode: 32ºC
Display Screen Proximity: 29ºC
Graphics Processor Heatsink 1: 34ºC
Graphics Processor Temperature Diode: 44ºC
Hard Drive Bay 1: 31ºC
Main Logic Board: 32ºC
Northbridge Chip: 55ºC
Northbridge Heat Sink: 50ºC
Northbridge Position 1: 39ºC
Optical Drive: 26ºC
Power Supply Position 1: 42ºC
SMAR Disk WDC: 33ºC
CPU Core 1: 33ºC
CPU Core 2: 32ºC
less then 5 minutes in the computer shut itself off...
went to safe mode, temp was as follows:
20 minutes running safe mode:
28ºC
50ºC
55ºC
56ºC
50ºC
54ºC - Graphics Processor Heatsink 1
64ºC - Graphics Processor Temperature Diode
47ºC
52ºC
86ºC
81ºC
62ºC
41ºC
74ºC - Power Supply Position 1
49ºC
few hours running in safe mode:
26ºC
49ºC
56ºC
56ºC
52ºC
54ºC - Graphics Processor Heatsink 1
64ºC - Graphics Processor Temperature Diode
50ºC
54ºC
89ºC
84ºC
64ºC
45ºC
80ºC - Power Supply Position 1
53ºC

HP w2207h sleep mode problem

Hey,
Just playing a video game & the graphics went kind of 'wobbly' for want if a better word & then breaking up..... Then the monitor went to sleep and when I start my pc now it just keeps saying VGA input no input found and then sleep mode kicks in... I can't even get to the monitors menu when it's disconnected from the PC just says 'check video input'
Is this a monitor or PC problem? Any help much appreciated.....

Yeah I've checked the PC by trying on my LCD tv and its started on there ok to start with buy I got a knock on the door had to leave and when I came back the tv said no input signal so I was at the same conclusion.
I have the previous graphics card (upgraded about 18 months ago) to put back in so ill try that.
Thanks for the help :-)

Powerbook G4 Sleep mode problem

Hi everyone,for some days my friend's Powerbook g4 is going to sleep mode every 2-3 mins. I removed the AC Adapter to try the powerbook only with the battery, the powerbook going to sleep mode after 2-3 mins... I removed the battery and connected the AC Adapter, same bug appened. So i read about how to reset the Power Management Unit.
Well, when I reseted the PMU, the powerbook worked well for about 1 hour, and after... Sleep mode again and again...
Is the powerbook dead ?? Or some internal battery dead ?
Thx for reading and helping, and sorry for my bad english...
- Philip

Sadly my Apple Care has expired for this product.
I followed their instructions to reset the power module, but it still did not work.
Then I tried booting under the TechTool disk that came with the AppleCare kit and the display fucntioned just fine - so I assumed as they say on the site, the system is corrupted (which it likely is due to a faulty heat sensor or some code that may be easily replaced)
ONLY PROBLEM - My computer is now in 'system load' mode, and I cannot get back to any sort of directory to remove the necessary files:
1) go to HD-Library-preferences-SystemConfig and trash com.apple.powermanagement.plist. Empty Trash
2) shutdown and then reset power management unit by holding Opt-Ctrl-Shft-Power for 5 sec.
3) restart
Detailed info at http://docs.info.apple.com/article.html?artnum=14449
How can get the system to reinstall if it is going to sleep every 15 seconds? Is there some code I can override prior to boot up?

T60 Type 2623 Blue Screen on Resume from Sleep Mode problem solved - XP Pro

I hope that this post ends some frustrations for some people.
I hope that IBM deals with this issue by getting ATI to fix the video driver issue.
After three months of tracking down blue screens when resuming from Sleep Mode and some lockups while working, I have identified the problem on my T60 Type 2623 running Windows XP-Pro and all service packs and updates. The Sleep Mode resume issues were intermittant and it would be fine for a day or two and then reboot on Resume or reboot every time I used Resume for a while. For months the Blue Screen would reboot and attempt to send the message to Microsoft using the logs, but the logs were always corrupted. I disabled every driver that I could and the problem continued for months.
The problem solution came about when I decided to try my Rhapsody Music account after many months of not using it. I kept getting a message about DRM (Digital Right Management) being disabled and Rhapsody software could not self-fix this. So I finally called Rhapsody and they spent over an hour with me trying to get Rhapsody to work. The support person asked me about my computer and I noted that it was an IBM T60. He then asked about my Video Card and I responded that it was an ATI Mobility Radeon X1300. After a few minutes on hold he asked about my driver version which was 8.442.3-080103a1-057754C the set from January 31, 2008. He noted that there is a known problem wit the 8.4 driver and it interferes with DRM. He had me go to control panel Settings and Hardware and then roll-back the driver to the prior version.
After a reboot, the DRM issue was solved and I soon discovered that my resume from Sleep mode no longer crashed. In fact it has been fine and crash free for over a month now. I have noted that the older driver can sometimes resize my screen to something like 600 X 800 if I close the lid under certain circumstances, but that is just a function key reset to get my normal desktop resolution back. At least it is not a blue screen reboot with a corrupted log file.
Message Edited by retro74 on 07-05-2008 08:50 AM
Solved!
Go to Solution.

Unfortunately I could not fix the problem so I wiped my system and loaded all new drivers before I found this posting.
Is there a way to get the old ATI driver that works? The only one available on the ATI and Lenovo website is the latest one with the problem. I agree with you David, Lenovo should have fixed this problem already with ATI.
John

[M73-SFF] - multiple sleep mode problems

My new ThinkCentre M73-SFF will not enter into sleep mode. It also will not stay in sleep mode when I manually put it into sleep mode. It regularly would go into sleep mode when I first purchased it but not so now. I have searched on the net but cannot find any solutions. I have disables the screen saver thinking this was a problem but it did not solve the problem. Anyone know of a solution?
Moderator comment: Subject edited to match content.

THANK YOU @someotherguy for explaining the problem. This solved all my issues, also for a newly bought laptop. The more recent Windows 7 updates solve the issue by subsuming the fingerprint manager update under the system updates. I know this because it's definitely a different version of fingerprint manager from when I first bought the device last week.
Nevertheless, this is far more useful and informative than the helpdesk chat support personnel I spoke to.
Internetz wins again.

OS X Mavericks v10.9.4 Update still does not fix the wifi shut off in sleep mode problem

OS X Mavericks v10.9.4 Update was supposed to fix the wifi connectivity problem with my iMac. Wifi disconnects in sleep mode and does not connect when awakened. Must reconnect manually every time. PITA.

Your observation is correct about wifi disconnection in sleep mode. That is normal, you may want to check to see if your Mac supports Power Nap/is enabled- OS X: About Power Nap
The reconnect should be automatic within a few seconds.
Does it happen with multiple wifi networks or just one?
Have you tried deleting and re-adding the wifi network?

Returning from sleep mode problem

Occasionally, when I open my MacBook from sleep mode, the login screen looks faded, the print is very faint and is shifted to the left. I can type and put in my password, and when I hit enter, it takes me to the normal login screen. But then my mouse will not move. I can tap the spacebar and click on my trackpad, and after about 10-15 seconds the mouse will move and I can click, sign in, etc. and when I sign in everything is normal, so it really doesn't affect my use but it is a little concerning. I already reset my PRAM, which an apple worker told me to do, but it didn't change anything. Anyway, help would be appreciated. Thanks.

It just happened again, and I was able to read the message that flashes on screen (very sporadic): "Not Optimum Mode" and something along the lines of switch to 1680x1050? with a big question mark icon. I'm wondering if the Mac is trying to force a higher resolution on the monitor when it comes back from sleep mode, even though I have it set at 1680x1050?

Sleeping mode problem: the hard disk doesn't stop to run.

Hello,
I try to put my iMac (Lion) in the sleeping mode. The screen becomes black but the hard disk doesn't stop. I don't see any live process in the activity monitor. This problem was not there before and I have no idea to correct it.
I you have a good idea for me !!!
Thanks

Then perhaps you have something now running on your system that is causing the computer not to fully sleep. You may want to open Activity Monitor to check what is running and to see if any application or process may be crashing.
You can also try creating a new, temporary user account, then logging into the new account to see if this issue ceases.

How to repair sleep mode problem for thinkpad t510

hi, everybody
Recently, I found that the windows was wakeup once I touch the mouse when the laptop was in the lid closing position. A wireless mouse connected into my laptop. After I close the lid, the windows turns to sleep mode. But once I move the wireless mouse, the windows is wakeup with closing lid. How can I fix this problem？ I dont want the window wakeup once I move the wireless mouse. I just simply want windows turns to sleep mode after I close the lid. My operation system is win 7.
Many thank.
Solved!
Go to Solution.

Uncheck the Wake computer checkmarks in Device Manager for your wireless mouse. If it's Bluetooth, disable it for that too.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

SLEEP MODE PROBLEMS!!! HELP!

Similar Messages

Maybe you are looking for