Sleep mode shut down

i recently upgraded to 10.4.9 and everytime i put computer to sleep it shut down after about 5 min. i checked all energy set pionts and they are default to never shut down. what could be problem?

Try these diagnostic procedures:
1) Try trashing these 3 .plist preferences and reboot. Reset your Energy Saver preferences.
HD > Library > Preferences > SystemConfiguration > com.apple.AutoWake.plist & com.apple.PowerManagement.plist
User > Library > Preferences > com.apple.systemuiserver.plist
2) Do an Open Firmware reset: Hold the CommandOption+OF keys during startup. At the '>' prompt type:
>reset-nvram
Return
>set-defaults
Return
>reset-all
Return
Reset PRAM:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound (bong) for the second time.
6. Release the keys.
3) Reset your PMU.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
Disclaimer required by Apple Discussions Terms of Use: MacOSG - a non-profit Apple User Group - may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

T440 - solid state drives and sleep mode, shutting down, etc.

First time with a solid state drive. With my T61, i tend not to actually shut it down unless i really need to. I just leave it on, close it, and let it go into sleep mode - which i can tell its in because of the moon icon/light. if i just need to move it around the house, i also only put it in sleep mode. If I take it somewhere of course I shut it down first. But that's always a pain, I tend to have multiple browser windows open with many, many tabs. I just hate having to book mark it all (even using bookmark all tabs) then opening them all up again.
So, I'm wondering
1) there doesn't seem to be any light to indicate that its in sleep mode - but maybe it doesn't exist in the same way with a SSD? I was always under the impression that the point of that was to make sure the moving parts of the drive had stopped before you moved the laptop.
2) is it still ok for me to just leave it on most of the time like I do with my T61?
3) Can I get away with not shutting it down when I take it someplace? Other than the battery running down - why would that be a problem since it doesn't have a spinning hard drive?
4) Windows 8, ok this is really a different topic, but I'm here already. When you shut it down, if for example, you have a bunch of browser windows and tabs open and maybe a couple of word docs - when its started back up, will it automatically open all that? Or do i have to re-open all the windows, find the word files, etc.?
5) Anything else I should know about a SSD or windows 8 that is significantly different from what i've had with my T61? (other than the logo being upside down on the top cover)
Moderator Note; subject edited; system type added

Hi again,
1. The red dot over the i in ThinkPad will pulse slowly when your machine is in sleep mode.
2. Yes, absolutely. I use sleep instead of shut down almost exclusively on all machines I use
on a daily basis.
3. Same as before, you don't have to worry about doing anything different. The machine won't
run out of battery during sleep mode for days.
4. It doesn't matter wether you run Windows 7 or 8, you use your browser settings to set it to
open the tabs where you left off.
In Internet Explorer -> Internet Options -> General Tab -> Startup -> Start with tabs from the last session.
In Chrome -> Settings -> On Start Up - Continue where you left off.
Same option is available for Firefox too.
But if you shut your machine down, your programs won't start up automatically with the files you had open
before shutdown, but I'm sure you meant to say sleep, right? When you resume from sleep, everything you
had open will be right there.
5. No, not really. It's just a new generation of a ThinkPad workhorse with a new version of Windows, you
don't have to change any of your daily routines you've gotten used to.
Cheers,
Atli Jarl.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

WINDOW 8.1 ON SLEEP MODE SHUTS DOWN

Please i have been having issues with my Windows 8.1. I find it very difficult to put my system on sleep mode , when using this boot option my system automatically restarts itself and all unsaved information or documents is lost. How do i reset this options
to it's default.Thanks

Hi olagoke,
Did the issue occur accidently , have you installed any software recently?
First of all, please install the latest drivers for the machine and update the BIOS to check whether the issue is gone.
Apart from this, I agree with the Clean Boot , Device Clean Boot and Powercfg command solutions involved in the link posted by
arnavsharma.
If the issue persists, I recommend you check the Event Viewer to collect some information for further diagnostic.
To check Event Viewer:
Event Viewer \Windows logs \System
Best regards

Cannot sleep or shut down when connected to TV through DVI

I recently reinvigorated my 2003 Power Mac G5 (Power PC) with a clean install of OSX Leopard and connected it to my TV via a VGA cable and DVI adapter. I soon discovered the computer would not sleep or shut down with the TV connected:
- Selecting "sleep" from apple menu, OR
- Pressing sleep button on original ADC monitor (with both monitors connected,) OR
- Waiting for 15 minute automatic sleep mode:
computer sleeps (tower clicks off as normal) but immediately wakes again
- Selecting "shut down" from apple menu:
computer shuts down completely but immediately reboots
When the G5 runs on only the original monitor, sleep and shutdown commands work as expected.
Aside from unplugging the DVI adapter every time I want to sleep or shut down, is there a solution to this problem?

I've seen the TV problem before, not sure there is a cure, but perhaps one of these...
http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID15122041&partno =30011&search=VGA_SWITCH&rsite=&rcode=
The DVI ones don't have high enough resolution...
http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID15122044&partno =81112&search=DVI_SWITCH&rsite=google.comsearc&rcode=

Should I put it to SLEEP or SHUT DOWN?

Greeting everyone. I recently purchased my first Macbook, my first laptop ever. I've pretty much grown up using a desktop pc. I turn it on when I get home, put it on sleep mode when I leave it to watch tv or what not. If I'm done with it for the day, I turn it off.
Now before everone jumps on me for probably doing the wrong thing please note that I come from a "Turn it off when you're not using it kind of family". Can someone give me some pointers in using my new mac? For example, someone told me that I can actually leave my macbook in sleep mode the entire day even when traveling to and from school/work. Is this safe for my macbook? I apologize if this is such an elementary question.

I have found that my machines respond better when I just close the lid (sleep). It is important to understand that the laptop caches everything in memory to the hard drive before it goes to sleep, so you want to make sure you allow the extra time for that to happen (wait until the sleep light starts pulsating) before you move the laptop if you can. Otherwise you're moving the machine while the hard drive is still spinning. I know that the newer laptops typically have a Sudden Motion Sensor that will automatically park the heads under certain conditions, but why tempt fate? Depending on how many applications you have running, and how much RAM you have installed, going into sleep mode can take longer than you might expect. Whether you adapt a sleep or shut down operating preference (I prefer sleep- only shutting down every once in a while for OS installs, restarts due to problems, etc.), it is much more important to follow Apple's guidelines for calibrating the battery. Not only does following these instructions allow the computer to more accurately report the battery charge level, it also runs the lithium ion battery through a complete cycle - something that is needed every once in a while to keep it operating in tip-top shape. The instructions for the procedure are found here:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/9036.html

Sleep or shut down at night?

Hi, it just occurred to me that in summer with frequent lightning storms especially during the night, might it be a good idea to shut the computer down and disconnect the power adapter at night?
I tend to use the computer plugged in during the day, with short periods of battery use, and then at night I leave it plugged in and just close the lid. Even with old PC's I did this without a problem, but with my new MBP I don't want to take any chances!
Thanks,
Karen

karenr wrote:
Thanks.. re. shutting down at night, I thought there was an issue of wear and tear from starting up so often.. otherwise it would certainly be simpler to shut down and not worry about nighttime power surges.
I don't worry about wear and tear, because although technically it might be better to run your computer at full power 24/7 to avoid premature wear from thermal and power cycling, realistically nearly every Mac user either sleeps or shuts down their laptop at least once a day whether that's at night or merely to transport it (since it is a laptop after all) and therefore powering off is the norm, and it is not causing mass early laptop deaths.
We are also weighing leaving the computer plugged in versus the potential damage from a lightning strike, and we're saying the potential damage from sleeping or shutting down at night is assumed to be less severe than that of a direct lightning hit.
Re. sleeping the computer all night and draining the battery, I do that once a month to calibrate the battery, but isn't it recommended to not drain deeply too often?
You are right that is is recommended to not do deep discharges too often. But an overnight sleep does not drain the battery that far, maybe a few percent. What I didn't mention is that if your battery is new and fully charged, it will probably last around a week in sleep mode. One night off the charger isn't going to drain the battery unless, as I mentioned, it's an old battery with a fraction of its original capacity.

When waking from sleep, it shuts down

I use the energy saver to put the computer to sleep when I'm not using it. When I hit a button to "wake" the computer, it starts to spin up but then shuts down.
I was told by Apple (when I still had my call-in protection plan) that this was because there was no room on my hard drive. This first happened when I had about 1 GB left (60GB drive). I have subsequently bought an external drive on to which I have moved my music files and now have 25+ GB, so that should no longer be an issue.
Any ideas?

USB scanners are generally a red flag for sleep-related isuues but usually in terms of failing to wake or failing to sleep, not shutting down instead of waking up. You can check if the peripheral hardware is involved by disconnecting all peripherals other than keyboard and mouse, Starting Up in Safe Mode (to disable any peripheral drivers), and seeing if you can then sleep and wake the Mac without the shutdown problem.
The system.log messages indicate you have the Mac set to use a Virtual Private Network (VPN); I'm not familar wnough with that to be sure if it affects the wake-from-sleep issue. You may want to post that snippet from the system.log along with a statement of the problem in the Using OS X 10.4 Tiger forum part of the Apple Discussions in order to reach a broader audience than in the eMac part of the Discussions.
The 'SystemUIServer not responding' message may be helped if you try this:
-- trash /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
-- trash /Users/[username]/Library/Preferences/com.apple.systemuiserver.plist
-- reboot while resetting PRAM
To reset PRAM, restart, as soon as the screen goes dark, hold down command-option-p-r until you hear three sets of chimes, then release the keys and let the Mac finish starting up. You may need to re-do some System Preferences settings after resettings PRAM (see What's stored in PRAM?)
BTW, a viable workaround is to change the Energy Saver settings to slepp the display only after XX number of minutes, with put system to slepp set to Never and put hard drives to slepp when possible unchecked. That also ensures the Mac can perform the background maintenance tasks overnight. If you normally shut down an OS X Mac overnight or leave it in system sleep, the cron maintenance tasks cannot run in their nominal 3 am timeframe. (Display-only sleep allows the maintenance tasks to run). Tiger 10.4.2 and later will force the maintenance tasks to run after sufficient time has elapsed, but kust how long is long enough, and whether the timer is reset on shutdown, isn't entirely clear. You can leave the Mac in display-only sleep a weekend or two a month; you can manually Force Background Maintenance; or you can use a third-party utility such as OnyX to run the maintenance. Note that any system utility you use must be compatible with the OS version (e.g., use the Tiger version of OnyX with 10.4.x).

Start up Disk full and MacBook Pro won't reboot. Only white screen but can sleep, restart, shut down.

Start up Disk full and MacBook Pro won't reboot. Only white screen but can sleep, restart, shut down.

Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.

Sleep or Shut Down with Mac Pro RAID Card?

I'll be gone for a four-day weekend trip, which is longer than the 72 hours claimed for the Mac Pro RAID Card battery. If I shut down and come back four days later, the battery will presumably be discharged. What will happen when I restart?
Asked another way ... is 72 hours the maximum amount of time that the computer should be shut down or do I simply restart and wait for the battery to recharge and the write caches to be re-enabled?
The FAQ for the Mac Pro RAID Card http://support.apple.com/kb/HT1346 talks around this issue, but doesn't say whether it is a good or bad idea to allow the battery to discharge for "... any length of time." Please review the appended excerpt from the FAQ and advise on whether I should sleep or shut down.
Regards,
iPhoton
Question: Why does RAID Utility show a yellow light and report the status "Write cache disabled"?
Answer: The write cache is disabled automatically so data cannot be written to RAID volumes when the battery charge is not sufficient to back up cached data for 72 hours. This message is normally encountered when a RAID Card is used for the first time, when the battery enters a conditioning cycle once every three months, or when a computer with a RAID Card installed is shut down for any length of time.
If your RAID card's firmware is M-2.0.3.3 or later, or E-1.2.2.4 or later, you can use RAID Utility to force-enable the write cache while the battery conditions itself. Warning: If you enable the write caches before the battery is fully charged, you might lose some data if the power to your computer is interrupted.

Thanks to everyone who replied to my message. I did a proper backup and normal shut down on Wednesday night and restarted on Monday morning. That was over 100 hours later and certainly more than the battery is specified (72 hours).
When I restarted on Monday morning I noticed ... no change! The battery was fully charged according to the RAID Utility, I received no warning messages, there were no new events in the RAID Utility log ... it's as if the extended shutdown never occurred.
So, an extended shutdown appears not to be a problem and I won't worry about it again, not even on my next extended shutdown for three weeks at the end of the year.
Regards,
iPhoton

Is it better to sleep or shut down at night?

Is it better to sleep or shut down when I'm through with my iPad for the night?

I have been letting mine sleep when not in use since buying it new almost a year and a half ago...has never caused any issues with it. Only time it has been shutdown is for aircraft take off and landing.

I have a Macbook Pro 2009, i upgraded from 10.5 to 10.8.2 and now when I put it to sleep it shuts down. Does anyone know how to fix this?

I have a Macbook Pro 2009, i upgraded from 10.5 to 10.8.2 and now when I put it to sleep it shuts down. Does anyone know how to fix this?

That disk from her computer is a machine specific version, you need this disk
http://store.apple.com/us/product/MC573Z/A
and follow these instructions
How to erase and install Snow Leopard 10.6

Sleep or shut down the laptop?

Is it better to sleep or shut down the laptop? I mean in general for the laptop, not necessarily to save battery or anything. Thank you!

No need to shut down unless perhaps the laptop is going to be in a travel bag for a while.
I just close the lid to stop using; open the lid to use.
I've been doing this routine since OS X 10.0.

Sleep and Shut-down menu commands

Our 500 MHz Power PC G3, upgraded to system 10.4.6, is a great machine and a real work horse for us. However, it has been acting up lately. The apple symbol drop down menu command that puts the computer to sleep, restart, shut down etc. will not respond. The key board commands for sleep etc. also don't work. I tried the Disk Utilitly- First Aid, both Disk Repairs and Permissions. "No repairs were necessary" for both. I even reinstalled OS 10.4.6 which seems to have complicated the problem and ate a big chunk of our precious little harddrive memory. Now every time I start up I get the warning message, "Application Launch Failure" The applicaton "Transport Monitor' could not be launched
because of a shared library error:"8<Transport Monitor><Transport Monitor><HotSyncLib.PPC><"
Could this be the root of the drop-down menu problem?

As I said, a weak or dead PRAM battery can reportedly cause odd startup issues. If it has never been changed in six years, that's a really long-lasting battery, even if the iMac was kept on continuously.
They are pretty cheap from the right source, so you may want to try changing it.
http://eshop.macsales.com/item-specials/Newer%20Technology/BAA36VPRAM/

Won't go to sleep or shut down

My iMac won't go to sleep or shut down when I tell it to. If I push the button on the back to make it go to sleep it doesn't do anything and if I select sleep from the apple menu it doesn't go to sleep. If I click shut down in the Apple menu it goes to a blue sreen and then the little loading symbol comes up and it just loads. I left it for an hour and it was still loading so I just held down the back button and turned it off that way. What can I do to resolve this?

First, try eliminating some variables-
Disconnect any devices attached via firewire or USB, and try again.
Some USB devices have been known to prevent the iMac from going to sleep or shutting down.

MacBook Pro won't Sleep or Shut Down

My MacBook Pro won't go to sleep or shut down.
Sleep
The behaviour is the same whether I press the power button and choose 'Sleep' or whether I choose 'Sleep' from the Apple menu. The computer stays awake, but it loses the ability to respond to Keyboard Shortcuts, such as those used for Expose, and can get stuck in some Apps. If I close the lid the computer stays awake but the screen blacks out. Re-openning the lid does not re-illuminate the screen so I have to force shut down and re-boot.
*Shut Down*
The behaviour is erratic. Sometimes the computer simply ignores me (although it does close the 'Are you sure you want to Shut Down now?' window), and sometimes it goes to the blue screen with the progress circle and hangs.
*What I've tried already*
- Resetting the SMC
- Checked the Firmware versions are the latest

Sorry for the repost. New to this forum and I hadn't seen the answers to the last time I brought up this topic here:
http://discussions.apple.com/message.jspa?messageID=5050821

Sleep mode shut down

Similar Messages

Maybe you are looking for