Sleep mode wakeup with black screen with curser for a few seconds

when the computer goes to sleep, sometimes when i click anybutton, it gives me a black screen with a curer and then it apparing everything normally. whats the problem causing this

I have the same problem but I do not know of any solutions. I am searching for one as well.
Let me rephrase the issue I experience. After the display goes off because of the energy saving settings, and after moving the mouse (or pushing a key) to wake it up, the screen appears black (but with the presence of the mouse cursor, which can move and even change shape---to a hand or a hyphen---if the pad is clicked) and stays black for a couple of seconds, from 3 to 10 seconds I believe.
The computer is not responsive after that but not before. The previous and normal behavior is intead for the screen to turn on immediately and the computer being responsive right away. Instead, now there is a window of 3-10 seconds where the screen is black with a cursor and the computer unresponsive.
Of course, it is very frustrating. Please help.

Similar Messages

  • After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video c

    After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video content wether its from Netflix or streaming from my iTunes library

    You might try restarting the Apple TV by removing ALL the cables for a 30 seconds. If that doesn't help try using another HDMI cable.

  • Videos stopped playing... I get a black screen then plays for a few seconds and freezes.  Have downloaded the latest Adobe flash player and it did not help.

    Videos stopped playing correctly.  Now I get a black screen, then a few seconds of video and it freezes.  I downloaded the latest Adobe Flash player
    and it did not change anything.  Thanks for your help. CP

    One of the following steps should help.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:  > "Enable Plug-ins".
           or
        Internet Plug-ins >  "Allow all other plug-ins
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes beside all items.
        Check the box beside "Remove all website data".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I'm going to guess videos buffer for a while also...
    Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
    To close apps:   Double click home button, swipe up to close the apps.
    To solve internet problem, contact your provider.   Basic internet is not enough for video games and movies.   Your router may be old and slow.

  • My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

    My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

    Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
    Call Apple Care and see if your device is still under warranty to get it replace

  • Firefox 21 whole window goes black after being opened for a few seconds

    After most recent update (21 I think), Firefox window goes all black - no buttons, anything, a few seconds after opening. Sometimes it'll last a few minutes before going black. Start menu remains so I can minimize it, close it, etc. Audio if playing on the page will continue to play after blackout. Tried all basic tricks including uninstall/reinstall.
    Windows 7 64bit ATI Radeon 5XXX 4gb ram. Other browsers work fine. All else seems to be fine with Firefox before it goes black.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • My imessage wont work, when i open it the screen turns white for a few seconds then goes back to the home screen

    WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Messages>Send and Receive and sing out and sing back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart.  ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

    screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in.  looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Sometimes my iMac starts with white lettering across the screen on a black ground and after switching off for a few seconds starts on ok ! Any ideas

    Sometimes my iMac starts up with white lettering acrossthe screen on a black background - when it's switched off for a few seconds it starts up ok. Can anyone tell me why this happens ?

    I have read on here that a PRAM reset can cure this problem:
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Nano 6th turns on for a few seconds then screen goes black and nothing. what is wrong with it....

    My 6th gen nano turns on for a few seconds, then screen goes black and nano goes off. what is wrong with it? can any one help me out? do I need new battery? do I need a full repair? or is there something I can do myself to fix it.  Thanks for your help. 

    At the moment I say as I've fixed, momentarily:
    I made a downgrade to 1.0
    The problem, gentlemen, is the upgrade from 1.1 and 1.2
    It is a pity that I lost all the new features offered by the new firmware , just because Apple staff could not think to try this new update, on ipods with some airtime.
    I hope Apple pull out a version 1.3 with the ability to choose the feature detection, and the user can disable it at will.

  • Pro won't start.  Instead get a black screen and a beeping every 2 seconds. LIght at front right corner of keyboard flashes in sequence with beeping.

    Pro won't start.  Instead get a black screen and a beeping every 2 seconds.  Light at front right corner of keyboard flashes in sequence with beeping.

    If it is giving a single beep every two seconds, then it is not seeing any of the memory.  You could try taking the back off, remove the memory module and reinsert to see if that corrects the problem.  Or just take it to an Apple store genius bar and have the techs do that for you.
    If you are uncertain about working on the memory modules, you can find on-line videos for doing so at OWC, http://www.macsales.com where you can see the procedure for your year, make and model of MacBook Pro.

  • With 5th gen nano, how to display album artwork during playback at all times, it stays on for a few seconds and then the screen goes black? Is there a way to play and see artwork, at all times (using with a aux. speaker)

    I have a 5th gen nano, and I play it often on a aux. speaker. I would like the album artwork to display at all times while playing it here. Right now it plays for a few seconds on each song, and then goes blank. Can this be changed?

    The artwork turns black or the screen's backlight turns off?  If the backlight turns off, simply disable the backlight timer, but keep in mind this will significantly reduce your iPod's playback time and battery life.
    B-rock

  • The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

    The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

    When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

    Have you tried charging it with another known working USB sync cable?  After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Toshiba 46G310U turns on for a few seconds the goes black with a horizontal line

    I have a Toshiba 46G310U that when it is first plugged up it will come on for a few seconds and show a great beautiful picture, then the screen goes dark with a horizontal line across the screen that eventually fades out too. Turning the TV off and back on does not help, If I leave it unplugged for 5 minutes with the source unplugged also, it will come on when plugged back up for a few minutes at the most then starts the whole turning dark with the horizontal line that fades completely out. I've aready replaced the inverter board, the T-con board, and now I am at a stand still because I can find any help with the problem for starters(Toshiba Tech support was NO help and was unwilling to listen to my problem), second I am thinking possible power supply problem but I am having problems finding the power supply board, the main logic board, and the two small narrow boards that the T-con plugs into above the LCD display. Display has to be good for the picture to be perfect before fading to dark. Back light is also good as I can see it when the display goes dark it still has a glow and with the back of the TV off I can see the actual back light panel shinning. Suggestions? No I won't call tech support back as it was a horrible experience dealing with the rude techs. Thanks in advance.

    The tech at Toshiba support was rude and seemed more interested in what was happening in the office then my issue with the TV. I've talked to a local tv service shop and they had no clue about the LCD type of tvs. I just would like to know if it is the main logic/input board or the power supply board. I can find the power board but have had no luck with the main board. Mr.. Moderator if you have any suggestions from Toshiba I would be very appreciative of your help. Thank y

Maybe you are looking for

  • Reissue payment - with different exchange rate

    hi, Is it possible to reissue the payment,with the different exchange rate?? the reissue list box is disabled in payments screen? pls help me... thanks a lot n advance...

  • Monitor goes dark during gray screen after power outtage

    The mini was plugged into a surge protector, but after the power went out, it doesn't get past the gray screen with the swirling disk, then goes black with an out of range message. I took it to the Mac genius today, he diagnosed it with an external d

  • G/L Account FS01(Mass-Recon Generation)

    Hi Friends, I'm developing an tool in ABAP , Where it should generate mass Recon account when we execute the program, In the Selection -Screen there will be one Referance(Title) G/L Account and Company Code in one frame in the second frame there will

  • Interface level comments....

    (Using JDK1.4.0 and the javadoc tool supplied with it. Platform: WinXP Pro, using Textpad as editor.) I've created a class with class level comments before, but when I try it with an interface the resulting javadoc doesn't show the comment. Example:

  • Mp4 audio but no video

    Just installed the newest version of QuickTime and now my Camtasia produced mp4s will not play the video.  Is there a fix?