Sleep screen only

When using iPhoto stabilization feature it can takes hours to complete. For some reason the display does not go to sleep like it normally does when this is running. My question is - is there a way to simply turn off the display and leave the process running?

Have you tried setting a +hot corner+ for *sleep display* ?
You can do so from System Preferences +Desktop & Screen Saver+ pane. Click the +Hot Corners+ button. Set one of the corners to +Sleep Display+. When you want sleep the display, move your mouse to that corner and walk away.

Similar Messages

My iPad stop working suddenly i see black screen only pressing the home? and sleep button dose not solve the problem please help?

My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

When I power up my ipad air the apple logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough.

When I power up my iPad Air the Apple Logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough to get to the home page. The lock screen just disappears. I have to hit the sleep/wake or home button to bring the lock screen back up so I can swipe it. Have others found this situation with the iPad Air. I have an iPad 2 and it does not happen at all. The Apple store checked it out. One rep said to me this is unusual and had a tech check it out and they said this is normal. If the iPad is suppose to be user friendly, why this extra step to get to the lock screen? Are other owners of the iPad Air having the same problem? If so, what have you done to correct it?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

I have set the presence to screen only but the checkbox still prints adobe livecycle

I have set the presence to screen only but the checkbox still prints. I am using adobe LiveCycle design 9 and it is a dynamic form
This check box is part of an action, where when clicked, it copy's the data from one row and puts it in another. It is also in a row that can be added and removed.
But basically I want the check box to appear on the screen but not print (including when the form is converted to a PDF when its completed)

Intel-based Macs: Resetting the System Management Controller (SMC)
Power
The computer sleeps or shuts down unexpectedly.

Part of sleep screen message blocks book pages

Problem: Daily Edition PRS-950 2 months old. Yesterday afternoon, I slid the power button to exit sleep mode and a portion of the display screen was obscured. It looked as if a small part of the sleep screen was failing to refresh: at the bottom of the screen, there is an opaque rectangle about 1 1/2 X 2 inches. The right-hand edge of the rectangle is on a slant of about 35 degrees. There looks to be another angled side a bit further to the right, but I can't tell what is on that tiny slice. It shows about ten tiny vertical lines which remind me of a test page from a printer that's out of toner. I've reset the reader and I'm out of ideas.

I'm replying to my own message with a note about customer service for my broken Daily Edition (my $299 paperweight/boat anchor). After getting nowhere online I called the Daily Edition support folks (in India? not an American accent, for certain) and after going thru their troubleshooting process with no change to the screen issue, I was told that, since my Daily Edition was older than 30 days I qualified for a refurbished unit. Try as I might, the 30 day qualification is nowhere to be found in my copy of the product warranty. The two levels of care for my Daily Edition end at 90 days and 1 year. I insisted on getting a new reader and my issue was escalated up the chain (according to the CS rep I spoke to, there being no way to check on that) and not only was I told that the 30-day limit had been passed, but I had to give them my credit card before they'd ship me a refurbished unit. I've owned Sonys all my life and this is a new low in customer service. Nothing I can do, I suppose, except act disappointed and accept what they offer.

My lock screen only stays on on for a millisecond on start up ipad air is this usual

my lock screen only stays on on for a millisecond on start up ipad air is this usual.

Thanks for the replies. I like to power down most of the time to save battery so if it's gonna be normal for me not to be able to get to the slider screen before it goes into sleep I guess I will have to accept it. However I'm sure I remember rightly that the first few times I used it after set up it used to stay on screen for several seconds to allow me to slide the button over. Now it never does and to be honest I would expect it to wait after all you don't boot up your PC and then it immediately go into sleep mode unless something was wrong. I thought most things when powered on would let you sign in or whatever before "going to sleep".
Just concerned to do a reset in case the darned thing does erase stuff which would seriously tee me off. Appreciate the feedback guys.

After updating to 10.4.4 p/w not required waking from sleep/screen saver

I have this checked on in the Security Pref. panel, but the password dialog is not displayed. The computer just wakes from sleep/screen saver without requiring my p/w. Anyone else?

The important thing for the future imho, is to always Repair Permissions before & after any update... seems to ward off most of these problems. Of course that is only good if the disk is Verified once in awhile.
Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
http://docs.info.apple.com/article.html?artnum=302672
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751
In fact I'd start with those 2 now, if that doesn't help you may need to reapply some updates by getting them directly from apple>downloads.

Sleeping screen on Nokia 500

why is Sleeping Screen not supported in nokia 500 belle? I downloaded on my 500, but not running properly. display is only shown for a second while unlocking. is it due to hardware restriction?

i have the same problem...... please nokia ANSWER!!!!!!!!!1

Nokia Sleeping Screen on nokia 500 Belle

hey NOKIA, why u made this app and do not work on my new nokia 500 phone!!!!!!!!!
hope u can fix the problem, because its only show about 1 to 2 seconds and then dissapear

Dear Nokia 500 user!
Did u find this NOKIA Sleeping Screen App aka NSS in Nokia store ??
Or u downloaded the same from a third-party website ??
Just For your knoledge, NSS is not a compatible app with your phone,
It only works Smoothly with Nokia N8-00 & C7
& with some other models after sum MODS.
Hope this will solve ur query
In Love with Nokia, Symbian & N8-00

At the top of my iPhone 4s,(on the home screen) only the battery life is showing but on any other screen, it is normal. How do I fix it?

At the top of my iPhone 4s,(on the home screen) only the battery life is showing but on any other screen, it is normal. How do I fix it?

have you tried resetting the phone by holding the sleep/wake button and the home button until the phone restarts?

Why iPad mini battery drain so quickly in sleep mode? about 35% in 7 days sleep mode (100% to 65%). Compare with my iPad 2, 7 days in sleep mode, only 2%! (100 - 98%). is it because differences in iOS? iPad mini iOS 6.0.1, iPad 2 iOS 4.3.3. I'm really fru

Why iPad mini battery drain so quickly in sleep mode? about 35% in 7 days sleep mode (100% to 65%). Compare with my iPad 2, 7 days in sleep mode, only 2%! (100 - 98%). is it because differences in iOS? iPad mini iOS 6.0.1, iPad 2 iOS 4.3.3. I'm really frustating because of this. thanks for help

What kind of ipad mini / ipad 2 you got?
AFAIK,
1. ipads drain battery with 3g/4g on (regardless on wifi or not) 1% overnight.. so for 7 days .. 65 is about correct.
2. Are your ipads setup to receive remote push notification? (more push = more battery drain.. as the screen lit up)
3. With iOS 6 vs iOS 4 .. there are more stuff running in the background and more toggles.. that could also contribute to battery drain.

HT3302 if I take my iphone 5 into an apple store can they replace my cracked screen only?.

My phone slipped out of my hand landing face down on my kitchen floor. the screen is now cracked. nothing else is wrong with my phone and I want to only replace the screen. I don't see a need to get another phone if mine is fine (besides the big crack on the front.) I want to know if I take my phone to an apple store.. will/ can they replace the screen only? I'm not worried about price and I know warranty doesn't cover accidental damage.

Not many Apple Stores are equipped to repair iPhone front glass. If your local Apple Store did, it would be $149. Chances are, though, you will need to pay $229 for a replacement phone.

How to hide fields which is visible on screen only

Hi,
One of my template contains some controls that are set as visible on screen only, like the reset button. They are used for blank interactive form only. But when combined with xml data file,I donot want the use will see those controls when they review the output pdf file on the screen. Does anybody know what configuration I should set on/off to make it work. I still needs those controls set as visible on screen only. Thanks
Haoming

Haoming,
I do not think this is the right place to ask this question. If you are asking a Flex question, you should try here:http://forums.adobe.com/community/flex
Tom

Custom splash screen only shows up when command line is used...

Hi,
Everything in my Java web start application works perfectly but, the custom splash screen only shows up when command line is used ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"), if I use the shortcut on the desktop or in the start menu, the Java 7 splash screen shows up (tested under Windows Vista and Seven). Does someone have any clues?
Thanks...
My jnlp file :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="6.0+" href="AcSent.jnlp">
<information>
    <title>AcSent : Commande de repas</title>
    <description>AcSent - Commande de repas</description>
    <vendor>AcSent</vendor>
    <homepage href="http://www.xxx.eu" />
    <icon href="acSentIconBiseau.png" />
    <icon href="splashAcSentRC.png" kind="splash" />
    <shortcut online="true">
      <desktop />
      <menu submenu="AcSent" />
    </shortcut>
</information>
<security>
    <all-permissions />
</security>
<resources>
    <j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" max-heap-size="128m" />
    <jar href="AcSentJnlpProgressIndicator.jar" download="progress" />
    <jar href="AcSentJnlp.jar" main="true" version="1.0" />
    <property name="jnlp.packEnabled" value="true" />
    <property name="jnlp.versionEnabled" value="true" />
</resources>
<application-desc name="AcSent" main-class="eu.acsent.jnlp.AcSentApplication"
     progress-class="eu.acsent.jnlp.progressindicator.CustomProgress">
</application-desc>
</jnlp>

Hi again,
I made some researches :
- The link in the generated shorcuts ("C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp "C:\Users\Arnaud\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\46\69c1e9ee-1f252d1a") is not the same as the one I use in the command line ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"). Is there a way in the the JNLP file to tell how to generate shortcuts (not the icon, etc., but command line options)?
- This sample (https://blogs.oracle.com/thejavatutorials/entry/changing_the_java_web_start) displays the splash screen when I click on the the generated shortcuts (I use Windows 7). I have copied the ButtonDemo jar file and the JNLP file on my IIS web server (Windows 2008 Server), this time the splash screen does not show up when I click the generated shortcuts but always shows up when I use the command line. Can someone tell me if it is a trouble with IIS ?
Thanks again...

In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.

Hi all
In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.
Thanks & Regards,
Rajib.

Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
Maybe your goal is to stop then end user changing the component assignment that is automatically detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

Sleep screen only

Similar Messages

Maybe you are looking for