Sleep settings change after reboot

Every time I reboot my Mac Mini it changes the sleep settings to 15 minutes. I change it back to "never" (I use my mini as a movie server for the house) but if I have to reboot the computer it changes back to 15 minutes. It also selects the "Put hard disks to sleep if possible" button. It also will occasionally just change the setting even when the computer as not been rebooted. But it does this every time it is rebooted.

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. Restart again to test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Similar Messages

Display settings change after reboot

Thinkpad T400: 7417CTO
Windows XP Pro w/SP3
No docking station
I configure the extended desktop for external monitor and thinkpad LCD (both 1280 x768).
After I reboot for the first few seconds I see the display as pre-boot, then the displays are reconfigured for
single image at 800x600.
What is causing the display settings to change?
How do I prevent the display settings from changing?
Thank you,
Morris

hey p26grinz,
without the external monitor and after setting the display, will the setting remain ?
have you tried uninstalling the graphic driver from your unit and then testing it with generic driver ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Consle font settings change after reboot

Hello!
I just installed Arch from new medium and now everytime i restart my PC my terminal fonts evert back to defaults.
I set them to be Lat2-Terminus16 by adding code below in /etc/vconsole.conf:
KEYMAP=slovene
FONT=Lat2-Terminus16
FONT_MAP=
I have read here that there were some changes for fontconfig and i wonder how (if at all) they impact my situation, because
in a news it is said that: "Main systemwide configuration should be done by symlinks (especially for autohinting, sub-pixel and lcdfilter)"
cd /etc/fonts/conf.d
ln -s ../conf.avail/XX-foo.conf
Last edited by 71GA (2012-11-21 11:36:52)

Of course there is.
Rebuild your kernel image (refer to the mkinitcpio article for more info):
# mkinitcpio -p <name of your kernel preset; e.g. linux>
https://wiki.archlinux.org/index.php/Mkinitcpio
https://wiki.archlinux.org/index.php/Mk … activation
For the stock Arch Linux kernel, linux, this is done by running this command with root privileges:
# mkinitcpio -p linux
PS: The initramfs image (or images if you include the fallback image) is the one from the /boot folder. It's what loads before everything else is loaded. If you were booting into the LTS kernel, the preset would've been:
# mkinitcpio -p linux-lts
Last edited by DSpider (2012-11-21 12:31:21)

Raw device owners change after reboot the server

The raw device owner change after reboot the server. i have to adjust it manually like
chown oracle:oinstall /dev/raw/raw*
any idea to make it permanent after bouncing the Server?
MY OS is RHEL4 & Rdbms 10.2.0.1

I got my answer .
New to Linex. Need suggestions...
How i can create new file ? like i want to create file oracle.permission
should i use this command
touch <filename> or any other command?
second i want to put these entries raw device 3, 6,7,10,11 etc
shoud it work ? like in the oracle.permission directory?
# ASM
raw/raw[3671011]:oracle:dba:0660

Portcost value changes after reboot on Cat OS

here is the command on my switch
set spantree portcost 3/1-48 3019
after reboot have noticed many times.. the value changes to someother random value..
Can any one explain whats the reason behind this..
Thanks.
Mahesh.

Hi Mahesh,
Howdy!!
Can you please confirm that after reboot there is a change in path cost of port cost. As you have manually configured the port cost is should not change for that switchport but yes path cost may change after reboot as switch may found some other best path to reach the root bridge. All depends on topology and your network design.
Just want to confirm when the switch is rebooted does the value you have configured in the command changes in your config or you are checking this with a "sh spantree" command?
Regards,
Ankur

Calendar Settings reset after reboot

Hi,
Could anybody please check if you have the same issue on your phone?
Sony Calendar resets settings after reboot.
For example, if I set "Week starts on" = "Monday" and reboot the phone, this settings will be back to "Sunday" (which is the default).
I am now running Calendar 20.0.A.2.5, but I believe this bug was there before as well (even on my old Xperia V, I believe)
P.S. I found this topic, but either I didn't understand the solution correctly or it doesn't work for me... I tried to disable the Calendar app, but it didn't help in any way...
Solved!
Go to Solution.

I will forward this internally for further investigation. I will update you as soon as i have more information.
But as a possible workaround, i suspect you have selected a country/region under Settings -> Language & input -> Language where the week normally is set to start on Sunday like English US? If you are in the Netherlands but want the phone on english you could try setting it to English UK instead to avoid this until i have more information.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

ITunes settings lost after reboot

I have a problem where after a reboot the settings of iTunes are back to default. For example:
it loses the account for the Store (I have to re-enter email address and password);
it loses the wifi sync settings for my devices
it shows the iTunes tutorials screen, as if I'm starting iTunes for the first time
settings under preferences are lost
Other things are not lost:
the library is still there;
iTunes remembers the devices (when connecting it is handled as a known device) and knows what playlists/apps/.. to sync with it.
Since I'm not rebooting my Windows 7 PC a lot, the problem is not occuring a lot, it doesn't keep me from using iTunes, it is just annoying. Now after rebooting I decided it's enough and I would post the issue (since I can't seem to find a comparable issue).
Also worthwile noticing is that the problem is already there for some time, though I can't exactly pinpoint anymore when it started. Possible when iTunes 9 or 10 were realeased.
Now I'm using:
Windows 7 64-bit (completly up to date)
iTunes 10.5.2.11
Thanks for any help!

Router>sh ver
Cisco IOS Software, 1841 Sofware (C1841-IPBASE-M), Version 12.4(7d), RELEASE SOFTWARE (fc2)
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is 34 minutes
System return to ROM by power-on
System image file is "flash:c1841-ipbase-mz.124-7d.bin"
Cisco 1841 (revision 7.0) with 114688/16374K bytes of memory.
Processor board ID FCZ1251943K
2 FastEthernet interfaces
1 Channelized (E1 or T1)/PRI port
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM
31360K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2142
Router>

"Rendering: settings changed" after saving changes from Bridge

I have LR 2.6 on my Mac. I import RAW images through LR, let LR build 1:1 previews. Once the import has finished & previews are built, LR moves from image to image fine. I then do my basic edits, deletions, and do a batch renumber.
Next I go to Bridge to make my adjustments in the RAW window without opening the files. I go back to LR, save the changes, allowing the Bridge changes to overwrite the LR development import presets in the xmp files.
It usually takes LR a while to save all the changes, but eventually it does it. However, here is my issue. No matter how much time I give LR to render new previews, I don't think it does, at least not until I go to Library mode double click an image to view larger (to fit the window). When I go from image to image, it takes a few seconds while displaying the message "Rendering: settings changed..." Now, this is not necessarily right after I save the changes, but it still happens weeks later- whenever I go to view those images. Does LR not automatically re-render the previews after development changes have been made and saved to LR?
And if not, how would I force LR to do it for that catalog, or for all my images?
Thanks,
R

Robert Ripps wrote:
A fair question- one, when I have tried, LR is way slower on my Mac G5 than doing it in Bridge, which is slow itself. I just launched LR, had an open folder with 303 images in it which I had already rendered previews of, then clicked on Develop module- it took 13 seconds to go to that module & finish "loading". Yes, a new commuter would solve many problems <g>, but until then....
What you may need is more RAM. Or do you have other applications working in the background 13 seconds to build a preview!!!!! Using a old Macbook with 1.2 GB RAM an it does it faster than that!LR doesn't require a lot of power from a machine...it does need as much RAM as you can stick in a machine and the fastest disks you can use...but if it is taking 13 seconds to build a single preview then it isn't really worth using IMO
Why not make all you RAW adjustments in Lightroom Develop module. The raw processing engine is the same as ACR and you can choose "auto save changes to xmp" in the preferences.
Ah, bingo. That works, abet slowly (see above). Okay, I will just have to remember to manually do that once I save changes to LR from xmp data. I guess I thought LR would be smart enugh to do that itself, but I guess not. And again, I find it faster to go back & forths, even with an extra step.
LR can be set to automatically write any changes to xmp, it doesn't have to be done manually (set this in preferences) you just have the choice. It won't read changes made in other applications automatically as this would be a very bad idea..it would after all over write the LR database. So if you do want to over write the LR database you must activly choose to do so.
.

RV180 CSR is changed after reboot

I find that RV180 changes its CSR (cert signing request) after a reboot. This causes my cert to fail to upload.
Power up RV180
Create a CSR
View CSR (copy-n-paste into text file)
Power down RV180
Take CSR to Microsoft CA server to sign. Get cert in return.
Power up RV180
Upload cert. FAILED.
Open CSR in RV180.
Found CSR is different from that in step 3
If I change the workflow, it works:
Power up RV180
Create a CSR
View CSR (copy-n-paste into text file)
Take CSR to Microsoft CA server to sign. Get cert in return.
Upload cert. PASSED.
Open CSR in RV180.
Found CSR is same as that in step 3
The only difference in the two workflows is reboot the RV180. All this is happening on firmware 1.0.3.10.
On the out-of-the-box firmware 1.0.0.x, there is no issue.
CSR before reboot
-----BEGIN CERTIFICATE REQUEST-----
MIHJMHUCAQAwEDEOMAwGA1UEAxMFUlYxODAwXDANBgkqhkiG9w0BAQEFAANLADBI
AkEAz46n5j/6AtcVLzQdqMpf7QnyvdNk2nofmj2CZifRgMO2NMz+PWgZ+otipWmS
Yt+IJTxnB39BwLA01KFiouWwfQIDAQABoAAwDQYJKoZIhvcNAQEEBQADQQAMcPbJ
9CEKKIi8TU1a2GFB4QRoO37b+CE9Z386VbbFDzz+xgATJPP6eYwETvYmRBH1Ffhv
iqyv9JRMqts79l9W
-----END CERTIFICATE REQUEST-----
$ openssl req -text -noout -verify -in a.txt
verify OK
Certificate Request:
Data:
Version: 0 (0x0)
Subject: CN=RV180
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (512 bit)
Modulus (512 bit):
00:cf:8e:a7:e6:3f:fa:02:d7:15:2f:34:1d:a8:ca:
5f:ed:09:f2:bd:d3:64:da:7a:1f:9a:3d:82:66:27:
d1:80:c3:b6:34:cc:fe:3d:68:19:fa:8b:62:a5:69:
92:62:df:88:25:3c:67:07:7f:41:c0:b0:34:d4:a1:
62:a2:e5:b0:7d
Exponent: 65537 (0x10001)
Attributes:
a0:00
Signature Algorithm: md5WithRSAEncryption
0c:70:f6:c9:f4:21:0a:28:88:bc:4d:4d:5a:d8:61:41:e1:04:
68:3b:7e:db:f8:21:3d:67:7f:3a:55:b6:c5:0f:3c:fe:c6:00:
13:24:f3:fa:79:8c:04:4e:f6:26:44:11:f5:15:f8:6f:8a:ac:
af:f4:94:4c:aa:db:3b:f6:5f:56
CSR after reboot
-----BEGIN CERTIFICATE REQUEST-----
MIHJMHUCAQAwEDEOMAwGA1UEAxMFUlYxODAwXDANBgkqhkiG9w0BAQEFAANLADBI
AkEAuVXZl+Y+eE7xQKoq9Zn2t+InYE+GCdbESZN2/tqSjY1s+dQ5cEnRKmVdN96Z
HOle0h8+MnT/kXqKn4KpzxZe0QIDAQABoAAwDQYJKoZIhvcNAQEEBQADQQAMCjHx
SwP6MG3x4ri/Ips69ZvHL/EGGozH0kw0FkTRvx5ZKK4DWhbFDC/DmVYXN4CR+m10
oHOZm2jfFRShD+OE
$ openssl req -text -noout -verify -in b.txt
verify OK
Certificate Request:
Data:
Version: 0 (0x0)
Subject: CN=RV180
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (512 bit)
Modulus (512 bit):
00:b9:55:d9:97:e6:3e:78:4e:f1:40:aa:2a:f5:99:
f6:b7:e2:27:60:4f:86:09:d6:c4:49:93:76:fe:da:
92:8d:8d:6c:f9:d4:39:70:49:d1:2a:65:5d:37:de:
99:1c:e9:5e:d2:1f:3e:32:74:ff:91:7a:8a:9f:82:
a9:cf:16:5e:d1
Exponent: 65537 (0x10001)
Attributes:
a0:00
Signature Algorithm: md5WithRSAEncryption
0c:0a:31:f1:4b:03:fa:30:6d:f1:e2:b8:bf:22:9b:3a:f5:9b:
c7:2f:f1:06:1a:8c:c7:d2:4c:34:16:44:d1:bf:1e:59:28:ae:
03:5a:16:c5:0c:2f:c3:99:56:17:37:80:91:fa:6d:74:a0:73:
99:9b:68:df:15:14:a1:0f:e3:84

Hi ballerinasnoopy,
When you restored the device, it updated the iOS on the iPod to iOS 7. There is no way to go back to the old look. Sorry....
Cheers,
GB

Links to Folders on a external drive changed after reboot

I've got the following problem:
I've created some links to folders on a external (Firewire 800, Lacie 2big Quadra) drive in my Finder.
At first glance they are working fine and looking good, listened under places.
But after Reboot the links are changed to random files or folders on my usual Mac HD. The links pointing to folders on the internal HD are working fine!
For example:
before: "Work, Projects, Invoices" – after: "proloj.msd;italianWS;logqhrscv.ll"
This happened (almost) everytime, so i can't really work with my places
I tried to start the external drive up, before the Macbook starts, but no change.
Is this a Finder bug or a problem with the external HD? Otherwise it's working very well. I heard some Rumours about the latest 10.5.6 Update and Problem with the finder?
BTW - i got all updates from Apple

It happened again – but now i got pictures
After freshly adding the links:
http://dort.entlang.com/before.png
And after reboot:
http://dort.entlang.com/after.png
And the new links are not so random as it seems! "lpoptions.1.gz" is always the first entry.

[SOLVED] Permission for a file is changing after reboot

I know it may seem to you like a silly question, but it's a terrible problem for me. I tried to change permission for a file using chmod 660 and it changed of course ( I did it as a root ), but after reboot it resumed to the previous state. It's rather critical file form /proc/acpi/video/... and I need it for brightness manipulation. It's a file with a direct access to my hardware, so I think there's somewhere protection mechanism in Arch and I don't know what should I change.
Thanks in advance
Last edited by Gooru (2010-10-25 17:43:03)

Although this works, surely changing the permissions on every boot is a little backwards.
As far as I'm aware it's permissions are set like that for a reason - it's a hardware control and as such should only be touched with privileged permissions (root). The 'real' way to do this would probably be to use sudo and set up the sudoers file such that you don't need to use a password as a regular user.
That's just my two cents though... and if I'm honest, it's just me being really pedantic you can do it how you like!

Hwmon[0-3] not persistent, changes after reboot

I have a problem with conky, which refuses to start because it can't find my hwmon sensors.
ls /sys/class/hwmon/ -al
total 0
drwxr-xr-x 2 root root 0 2009-09-12 15:48 .
drwxr-xr-x 37 root root 0 2009-09-12 15:48 ..
lrwxrwxrwx 1 root root 0 2009-09-12 15:50 hwmon0 -> ../../devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/ATK0110:00/hwmon/hwmon0
lrwxrwxrwx 1 root root 0 2009-09-12 16:08 hwmon1 -> ../../devices/platform/coretemp.0/hwmon/hwmon1
lrwxrwxrwx 1 root root 0 2009-09-12 16:08 hwmon2 -> ../../devices/platform/coretemp.1/hwmon/hwmon2
lrwxrwxrwx 1 root root 0 2009-09-12 15:50 hwmon3 -> ../../devices/platform/w83627ehf.656/hwmon/hwmon3
These symlinks seem to change after each reboot. So when I refer to hwmon3 sensor 2, this sensor might suddenly point to coretemp.0 instead of w83627ehf.656.
Is there any way to make hwmon[0-3] always point to the same sensor? Thanks.

coretemp.0 is the name of a directory in /sys/bus/platform/devices/
temp = show the temperature
1 = sensor number inside the directory coretemp.0
ls /sys/bus/platform/devices/
Lists all the sensors you can use. For example, if you want to use coretemp.0, you add the following to .conkyrc:
${platform coretemp.0 temp 1}
So if you use:
${platform coretemp.0 temp 1}
Conky will show the value of:
/sys/bus/platform/devices/coretemp.0/temp1_input

SNMPv3 config changing after reboot

Whenever one of my C2960's reboot, our Solarwinds monitoring stops working. I found that this is due to one line of SNMPv3 config changing by itself. This used to be in the config:
     snmp-server group XXX v3 priv access permit-snmp
(permit-snmp being the access-list defining ip addresses allowed to query) After the reboot, snmpv3 stops working and this line shows up in the config instead of the one above:
     snmp-server group XXX v3 priv notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF7F
Is this a bug? (I did check the bug database, without success.) I have upgraded the IOS to 12.2(53) SE2 without any success. The switch is a C2960-24TC-L.

I had the same problem and believe the issue is that you probably have a trap server configured and are using the same snmp-server group for the trap server and your queries. I created another group for SNMPv3 queries and the configuration no longer seems to get overwritten. Here's what I did.
Go into config mode and create a group just for the trap server - let's call it TRAPS. I used priv and it looks like that's what you use. Don't worry about defining any MIB views as this group will automatically populate the notifyview once the trap servers below are added to the config. (...and will remove the readview and writeview entries after reboot - that's why a second group is needed). Remove your old trap server entries and set up the new trap server using the new group called TRAPS.
snmp-server group TRAPS v3 priv
snmp-server host version 3 priv TRAPS
Now create another group for queries only - (let's call it QUERIES but you could just use your current group XXX since it's already set up) - I like the v1default MIB view for both reads and writes but you can limit the MIBs with the snmp-server view command. I am using md5 and des56 here - your case may be different - and set up the user (or keep the one you already have configured)
snmp-server group QUERIES v3 priv read v1default write v1default access
snmp-server user QUERIES v3 auth md5 priv des56
Exit and check the config.
The group TRAPS should have the notifyview set. The group QUERIES should have the readview and writeview set to v1default (or whatever view you chose to enter here). The two SNMPv3 groups should look like this:
#sh snmp group
groupname: TRAPS                            security model:v3 priv
readview :           writeview:
notifyview: *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.F
row status: active
groupname: QUERIES                          security model:v3 priv
readview : v1default                        writeview: v1default
notifyview:
row status: active      access-list: 4
The old trap server entry using the old group XXX should have been removed already. Verify that the user: entry says TRAPS
#sh snmp host
Notification host: xxx.xxx.xxx.xxx      udp-port: 162   type: trap
user: TRAPS     security model: v3 priv
Finally make sure the user is in the correct group (QUERIES):
#sh snmp user
User name:
Engine ID: xxxxxxxxxxxxxxxxxxxxxxxxxx
storage-type: nonvolatile        active
Authentication Protocol: MD5
Privacy Protocol: DES
Group-name: QUERIES
If all is well - write the config. You should now be able to perform a coldstart without losing your SNMPv3 config.
Please, let me know if this worked for you.

MSI Control center windows 8.1 fan settings reset after reboot.

I wanted to see if anyone has any information about this. I have a z77a-gd65 motherboard running windows 8.1 and I have saved profiles for cpu fan and sys1/sys2 fans. After reboot the fan curves get reset to factoy defaults.
I didn't have this problem with windows 7 and am running the latest version of Control Center.
Is there a fix for this? Thanks in advance.

I actually did find a response from MSI in a random query.
They said, 'CC is used for temporary changes, use the bios'.
Which I can see the validity of that statement, but at the same time, what if you want to adjust things to a finer degree than the bios and want it applied after restart?
I know you can save and load individual pages of the Command Center, but still..
I do find it VERY irritating I can't set fan speeds lower than 50% for the System Fans. (or is there a way to do this?)

Hyper-V 2012 R2 - Linux Guest VLAN Settings lost after reboot

Hi Guys,
last night a have seen a strange behavior with a Sophos UTM 9.204020 Linux Guest VM. (This VM is based on SUSE SLES v11? i think)
So i have Setup this in my home lab and experienced the same problem.
----Setup-----
2 External VM Switches
Management OS is on VLAN 4093 with IP 192.168.20.1
The guest network adapter is in Trunk Mode, VLAN Tag (4093) is set in the guest OS with IP 192.168.20.100
Everything works until you kick off a reboot from the guest or hyper-v console, after the reboot you loose the connectivity on the network adapter with the vlan trunk.
If you shutdown the guest and start it everthing works again - this happens only on reboot!!
I have tried diffrent things (static mac, enable disable hardware features (vmq/offloading etc) on the vm network adapter but always the same error.
After some search on the net i have found this article: Link
This guy has the same problem with another linux vm (based on debian) his workaround was to trigger a powershell script with the eventlog after reboot of the vm, this works for me too but this must be bug?
Has anyone else experienced this problem?
André

Hi Andre,
I would suggest you to install the supported Linux guest OS on hyper-v , please refer to following link:
http://technet.microsoft.com/en-US/library/dn531030.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Sleep settings change after reboot

Similar Messages

Maybe you are looking for