Sleep wake problems with Yosemite update

I faced a multitude of issues with Yosemite 10.10. Following the 10.10.1 update, some of those were solved, but some still remained, namely those related to the Mail app, where mail server has to be selected manually. However, a new problem has arisen with the update: after going on sleep mode, the system does not wake, and needs to be rebooted. This happens every time, and makes me wonder about Apple's reliability, as it is starting to feel microsoft Vista like. Polishing the looks of the system is fine, bu doing so at the expense of performance, reliability and overall user experience is unacceptable. Looks as if a further update can not come soon enough.

Similar Messages

Macbook Pro Retina (late 2013) sleep wake problems under Yosemite

Hi,
Ever since I installed Yosemite on my MBP (details in the screen shot below), I've been getting Sleep Wake problems. At night, I simply close the lid of the laptop, leaving all applications running, and in the morning I wake it up. This worked fine under Mavericks on this laptop, but since Yosemite, every time I open the lid, I've had problems. Initially, I'd open the lid and the machine would restore from what looked like a deep sleep (screen would get an alpha layer on it, and the little progress bar would appear, as though it's waking from the battery running out). I ran Disk Utility, which found and repaired an issue on the disk (can't remember the details, unfortunately), and ever since then, when I open the lid, I have to hit the power button to get the machine going. It restores in about 15 seconds (nice and fast), and it does re-launch all of the applications I had open, but the machine will also show a little system alert, indicating a "Sleep Wake Problem". Each time I see it, I submit the issue to Apple. Because I'm an idiot, I forgot to copy the crash log from this morning, but I'll do that tomorrow and append it to this thread. Meanwhile, if anybody is having a similar experience and can isolate the cause, I'd love to know. A few variables which might matter:
* I have a Thunderbolt external hard drive which I use for Time Machine. Each night, I eject the disk before shutting the laptop down (I bring the machine home with me each night). My laptop used to have issues ejecting external disks, which I traced (thanks to this board) to an issue with attempting to put an external drive to sleep (I think that was the issue). I haven't had any issues since that time.
* The apps I have running all the time are Mail, Safari, Coda (text editor) and VMWare 8, which is running a Windows7 VM. That's been my environment for years now, yet the sleep-wake issue only started since upgrading to Yosemite.
Any help/advice is appreciated.
Thanks!

Hi Ben,
Another sleep issue and adding to your post... My MacBook Pro (2.7ghz early 2011)
Leaving apps open and closing the "lid" and then going to bed... several times thru out the night my MacBook will start to wake up. The optical drive spins up (DVD is in the drive), the hard drive fires up, I think i can see the screen glow ("lid" is still closed). Then it sets itself back to sleep (must detect the closed lid).
Did not do this with Mavericks or other earlier OSs.
I have not begun to try to figure this out... today is the day! lol.

Several problems with Yosemite update on my iMac/27"/mid-2011, but first Preview won't work...

When I try to open a jpeg with Preview, I get an error message stating that I need to reopen Preview. This doesn't help. When I try to open Preview Preferences, nothing happens. I have had multiple issues with Yosemite since upgrading just a few days ago. This is just one of them.

Quit Preview.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following.
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Credit Linc Davis for this solution.

Sleep/wake Problem with 15" MBP

Hey guys,
Just recently, my MacBook Pro has been acting up on me whenever I open it to wake it from sleep. The screen will wake for about 2 seconds and then will go back to sleep. The only way to get the screen back is by hitting the button that lowers the brightness then I have to hit the brightness increase button to get it back to normal which is getting really annoying.
When I put it to sleep with the screen open by hitting the power button, it'll wake up perfectly fine. The problem only occurs when I take it out of sleep by lifting the screen.
Has anyone experienced this before and is it an easy fix?
-Thanks

I just tried unplugging the charger and it comes awake with no issues at all, just comes up black when plugged in and have to use the brightness buttons to wake screen.....hmmmm
Jchaves wrote:
I did a little searching before i posted and it seems like the trouble doesn't have to do with the laptop itself it has to do with some sort of glitch in Lion. The problem only persists when i have it plugged into the charger but when i carry it around and open it from sleep, it wakes up perfectly fine.
Does anyone know of any settings that i can change that can make this problem go away?

Laptop sleep/wake problems with 10.5.7

I installed the latest security update 10.5.7 this week. Since then I have been having numerous daily issues with my new macbook (2.1ghz).
Problems encountered:
- laptop not waking up completely. the display will show but it's like its frozen(keystrokes and mouse don't appear to do anything)
- drives spinning but the display won't come up (I can see the actual screen very dim and using the brightness levels doesn't help)

I installed the latest security update 10.5.7 this week. Since then I have been having numerous daily issues with my new macbook (2.1ghz).
Problems encountered:
- laptop not waking up completely. the display will show but it's like its frozen(keystrokes and mouse don't appear to do anything)
- drives spinning but the display won't come up (I can see the actual screen very dim and using the brightness levels doesn't help)

Sleep/wake problems with j9 PPro10&WM2003

I'm currently developing an app on a pocket PC using WM2003.
My main headache is that if my app is running and the unit goes to sleep, sometimes it won't wake back up.
I can't determine any kind of pattern, it just seems to happen randomly.
I know that's kind of vague, I'm just hoping someone else has run into that problem and knows a workaround.
A more specific question I have is:
Does the J9 fire any events when the unit it's running on "wakes up"? I've tried some of the events available through the AWT, but nothing seems to fire when the unit returns from sleep.
Any pointers would be greatly appreciated.
Doug

I'm currently developing an app on a pocket PC using WM2003.
My main headache is that if my app is running and the unit goes to sleep, sometimes it won't wake back up.
I can't determine any kind of pattern, it just seems to happen randomly.
I know that's kind of vague, I'm just hoping someone else has run into that problem and knows a workaround.
A more specific question I have is:
Does the J9 fire any events when the unit it's running on "wakes up"? I've tried some of the events available through the AWT, but nothing seems to fire when the unit returns from sleep.
Any pointers would be greatly appreciated.
Doug

Problems with Yosemite update and hardrive space! How can I install and use macbook again?

I went to upload Yosemite but didnt have enough space on my hardrive. Now when I turn on my computer it tries to install - gets to about 15 minutes and then stops and says theres a problem extracting files from essential.
There isnt enough room on my hardrive to install Yosemite. I now cannot use my macbook. I cannot access any of my files, documents, apps, itunes ect. I dont know how to free up space on the hardrive when I cannot access anything.
tried to boot in safe mode but it will not let me. Stuck and unable to use computer. HELP!

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

HT4993 problem with software update

I need help how to reslove problems with software update on my iphone 4s.

Reset your device and try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss)
Also make sure you have enough free space on the device for the update file - usually requires 2 to 3 times the actual size of the file to be able unpack & install.

SLEEP/WAKE PROBLEM on my Macbook Pro 2.33GHz Intel Core 2 Duo

Greetings!
I love APPLE. So APPLE, please do try to help me out here...
The first problem I encountered was a faded translucent bluish/grayish rectangular line stretching from top to bottom suddenly showing up. I've shown this to our local APPLE technician and my LCD was replaced. Nice job here APPLE!
Now for the latest problem occurring as I'm writing this post. When I have my laptop fall into sleep, for say at least 5 minutes, and attempt to wake it up.. the user interface doesn't show up. The screen remains black and that pressing any key on the keyboard or clicking the mouse will automatically restart the laptop always (I do hope my internal hard disk won't be damaged from this reoccurring dilemma of mine). I've observed that this current problem started after my LCD was replaced.
Does anybody have the same problem as I have? If so, please do give me possible solutions for this? I've already talked with our local APPLE technician and told me that there might be some problems with the motherboard inside that may opening the laptop might be necessary.
Still... No worries APPLE (as of yet), I still love it even though it's my first time using such a wonderful invention of technology.
Fathom Graphis

Hi. This is Fathom Graphis again.
Reading one of the threads that mentions an individual asking for help from an Apple certified technician with a problem that's quite the same as mine, I followed the instructions given by this Apple technician that there may be an application or some device activated in the "SHARING" folder (under *System Preferences*) that's causing the problem of the laptop not waking up and requiring hard reset to get back to the Mac OSX user interface.
So, I checked my sharing folder and found that my *"PERSONAL WEB SHARING"* option is activated (Under the SERVICES menu). I deactivated (unchecked) it and tested my laptop sleeping function by shifting the PUT THE COMPUTER TO SLEEP arrow to 1 minute and letting the laptop sleep for 10 minutes. After which, I moved the mouse and the MAC OSX User Interface came abruptly and the laptop didn't restart. I tested it again by letting it sleep for another 10 minutes and waking it up through mouse click and the MAC OSX User Interface showed up abruptly and the laptop, again, restarted.
So far, I'm still putting my laptop under observation. But I just want to inform everybody with their supposed respective SLEEP/WAKE problems on their Macbook pros (or Macbooks) that this may solve their issues (though I provide no guarantees, okay? I'm just a common user who happen to find a solution accidentally).
Still I want to address APPLE that certainly, letting your laptop sleep and waking it up and restarting itself after with the Personal Web Sharing activated (or checked under System Preferences > Sharing > Services) is indeed a "bug" that needs to be fixed. So hopefully, the people at APPLE would try to resolve such an issue as soon as possible (because, to my knowledge, sudden restarts of Hard Disks may cause data damages). God Bless You All.
Fathom Graphis

Problems with Yosemite so far?

Problems with Yosemite so far: WIFI still seems a bit problematic, Safari on new update doesn't play youtube (neither hyperlinks nor for youtube's site), Problem connecting iPhone 6 to my MBP (late 2013, BT compatible) and turning Hotspot using continuity. Sorry guys, but it doesn't seem like the apple we all like, perfection-wise. any suggestion what to do? Maybe downgrading back to mavericks (god forbid, but it was an excellent OS)?

Wi-Fi: How to troubleshoot Wi-Fi connectivity
Wi-Fi Problems in OS X Yosemite
Wireless Diagnostics
Also try turning off Bluetooth.
Safari. Try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player
Adobe Flash Player updates available for OS X on October 24, 2014
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Problem with an update page.

I have a problem with an update page on my website
Here's how it work
values are defualted in from the advert table - this works fine
I should then be able to change the fields and click on the update button
This works fine but ONLY when the O_year field is populated.
There doesn't seem to be anything special about the O_year field
I thought spry text validation would of been causing the issues, but I removed them and have the same problem.
For some reason the POST_MMupdate value is not being set to 'form4', which it is doing if O_year is set.
Please can someone have a look at this, code,
Also, is there a way of 'stepping through' dreamweaver code to debug it?
Thanks
Adam
$colname_Advert = "-1";
if (isset($_GET['advert_id'])) {
$colname_Advert = $_GET['advert_id'];
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$query_Advert = sprintf("SELECT * FROM advert WHERE advert_id = %s", GetSQLValueString($colname_Advert, "int"));
$Advert = mysql_query($query_Advert, $guitarswap_db) or die(mysql_error());
$row_Advert = mysql_fetch_assoc($Advert);
$totalRows_Advert = mysql_num_rows($Advert);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form4"))
    //Сheck that we have a file
if((!empty($_FILES["PictureLocation"])) && ($_FILES['PictureLocation']['error'] == 0))
      //Check if the file is JPEG image and it's size is less than 350Kb
      $filename = basename($_FILES["PictureLocation"]["name"]);
      $ext = substr($filename, strrpos($filename, '.') + 1);
      if (($ext == "jpg") && ($_FILES["PictureLocation"]["type"] == "image/jpeg") &&
    ($_FILES["PictureLocation"]["size"] < 350000))
        //Determine the path to which we want to save this file
          $newname = dirname(__FILE__).'/upload/'.$filename;
          //Check if the file with the same name is already exists on the server
          if (!file_exists($newname))
            //Attempt to move the uploaded file to it's new place
            if ((move_uploaded_file($_FILES['PictureLocation']['tmp_name'],$newname)))
                   // echo "It's done! The file has been saved as: ".$newname;
            else
                   // echo "Error: A problem occurred during file upload!";
        else
             // echo "Error: File ".$_FILES["PictureLocation"]["name"]." already exists";
      else
         // echo "Error: Only .jpg images under 350Kb are accepted for upload";
    else
     // echo "Error: No file uploaded";
    $filename=$row_Advert['PictureLocation'];
    // set default opentoalloffers
if (!isset($_POST['checkopentoalloffers']))
    $_POST['checkopentoalloffers'] = 'n';
$updateSQL = sprintf("UPDATE advert SET PictureLocation=%s, O_Make=%s, O_Model=%s, O_Country=%s, O_Year=%s, O_Colour=%s, O_Body=%s, O_Neck=%s, O_Fingerboard=%s, O_Pickups=%s, `value`=%s, `condition`=%s, W_Make=%s, W_Model=%s, W_Country=%s, W_Year=%s, W_Colour=%s, W_Body=%s, W_Neck=%s, W_Fingerboard=%s, W_Pickups=%s, Comments=%s, opentoalloffers=%s, ChangeFlg = %s WHERE advert_id=%s",
                       GetSQLValueString($filename, "text"),
                       GetSQLValueString($_POST['O_Make'], "text"),
                       GetSQLValueString($_POST['O_Model'], "text"),
                       GetSQLValueString($_POST['O_Country'], "text"),
                       GetSQLValueString($_POST['O_Year'], "date"),
                       GetSQLValueString($_POST['O_Colour'], "text"),
                       GetSQLValueString($_POST['O_Body'], "text"),
                       GetSQLValueString($_POST['O_Neck'], "text"),
                       GetSQLValueString($_POST['O_Fingerboard'], "text"),
                       GetSQLValueString($_POST['O_Pickups'], "text"),
                       GetSQLValueString($_POST['value'], "int"),
                       GetSQLValueString($_POST['condition'], "text"),
                       GetSQLValueString($_POST['W_Make'], "text"),
                       GetSQLValueString($_POST['W_Model'], "text"),
                       GetSQLValueString($_POST['W_Country'], "text"),
                       GetSQLValueString($_POST['W_Year'], "date"),
                       GetSQLValueString($_POST['W_Colour'], "text"),
                       GetSQLValueString($_POST['W_Body'], "text"),
                       GetSQLValueString($_POST['W_Neck'], "text"),
                       GetSQLValueString($_POST['W_Fingerboard'], "text"),
                       GetSQLValueString($_POST['W_Pickups'], "text"),
                       GetSQLValueString($_POST['Comments'], "text"),
                       GetSQLValueString($_POST['checkopentoalloffers'], "text"),
                       GetSQLValueString('y', "text"),
                       GetSQLValueString($_POST['advert_id'], "int"));
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$Result1 = mysql_query($updateSQL, $guitarswap_db) or die(mysql_error());
    $updateGoTo = "Member2.php";
     if (isset($_SERVER['QUERY_STRING'])) {
       $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
       $updateGoTo .= $_SERVER['QUERY_STRING'];
     header(sprintf("Location: %s", $updateGoTo));
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<link href="Layout3.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<style type="text/css">

</style>
<script type="text/javascript">

</script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixLtHdr">
<div id="container">
<div id="header">
    <div id="Righty">
      <ul id="MenuBar2" class="MenuBarHorizontal">
    <li><a href="index.php">Search</a>      </li>
    <li><a href="Member2.php">Members</a></li>
</ul>
<p> </p>
</div>
<span id="LoginDiv">
    <?php
      if (isset($_SESSION['MM_Username']))
        echo "hello ". $_SESSION['MM_Username']. "";
        echo " <a href='Logout.php'>Log out</a> ";
    else
        echo "
            <a href='Login.php'>Login</a> / <a href='Register.php'>Register</a>
    ?>
    </a></span>
<div id="Middle">
<h1 align="center">GuitarSwap</h1>
</div>
</div>
<div id="sidebar1">
    <h4>Members Area</h4>
    <ul id="MenuBar1" class="MenuBarVertical">
      <li><a href="Member2.php">My Adverts</a></li>
      <li><a href="NewAdvert.php">Create new Advert</a></li>
      <li><a href="UpdateUserDets.php">My Account</a></li>
    </ul>
    <h3> </h3>
</div>
<div id="mainContent">
    <h4>Update Advert</h4>
    
</div>

<div id="main3">
    <div id="main">
      <fieldset>
        <legend>Please update advert details and confirm</legend>
        <form action="<?php echo $editFormAction; ?>" enctype="multipart/form-data" method="post" name="form4" id="form4">
          <input type="hidden" name="advert_id" value="<?php echo $row_Advert['advert_id']; ?>" />
          <p></p>
          <table width="650" align="center">
            <tr valign="baseline">
              <td width="17" rowspan="15" valign="middle" nowrap="nowrap"><?php echo "<img src='upload/" .$row_Advert['PictureLocation']."' width='64' height='180'/>" ?></td>
              <td width="133" align="right" nowrap="nowrap"> </td>
              <td width="240" align="center" bgcolor="#CCCCCC"><strong>Offered</strong></td>
              <td width="240" align="center" bgcolor="#CCCCCC"><strong>Wanted</strong></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Make:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Make" type="text" value="<?php echo $row_Advert['O_Make']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Make" type="text" value="<?php echo $row_Advert['W_Make']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Model:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Model" type="text" value="<?php echo $row_Advert['O_Model']; ?>" size="30" maxlength="30" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Model" type="text" value="<?php echo $row_Advert['W_Model']; ?>" size="30" maxlength="30" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Country:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Country" type="text" value="<?php echo $row_Advert['O_Country']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Country" type="text" value="<?php echo $row_Advert['W_Country']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Year:</strong></td>
              <td bgcolor="#CCFFCC"><span id="sprytextfield1">
              <input name="O_Year" type="text" value="<?php echo $row_Advert['O_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
              <td bgcolor="#CCFFFF"><span id="sprytextfield2">
              <input name="W_Year" type="text" value="<?php echo $row_Advert['W_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Colour:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Colour" type="text" value="<?php echo $row_Advert['O_Colour']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Colour" type="text" value="<?php echo $row_Advert['W_Colour']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Body:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Body" type="text" value="<?php echo $row_Advert['O_Body']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Body" type="text" value="<?php echo $row_Advert['W_Body']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Neck:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Neck" type="text" value="<?php echo $row_Advert['O_Neck']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Neck" type="text" value="<?php echo $row_Advert['W_Neck']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Fingerboard:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Fingerboard" type="text" value="<?php echo $row_Advert['O_Fingerboard']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Fingerboard" type="text" value="<?php echo $row_Advert['W_Fingerboard']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Pickups:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Pickups" type="text" value="<?php echo $row_Advert['O_Pickups']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Pickups" type="text" value="<?php echo $row_Advert['W_Pickups']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Condition:</strong></td>
              <td bgcolor="#CCFFCC"><label for="condition">
                <select name="condition" size="1" id="condition">
                  <option selected="selected" value="" <?php if (!(strcmp("", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>---select---</option>
                  <option value="immaculate" <?php if (!(strcmp("immaculate", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>immaculate</option>
                  <option value="excellent" <?php if (!(strcmp("excellent", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>excellent</option>
                  <option value="good" <?php if (!(strcmp("good", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>good</option>
                  <option value="well used" <?php if (!(strcmp("well used", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>well used</option>
                  <option value="poor" <?php if (!(strcmp("poor", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>poor</option>
              </select>
              </label></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Value:</strong></td>
              <td bgcolor="#CCFFCC"><span id="sprytextfield3">
              <input name="value" type="text" value="<?php echo $row_Advert['value']; ?>" size="11" maxlength="11" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span></span></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td align="right" valign="top" nowrap="nowrap"><strong>Comments:</strong></td>
              <td bgcolor="#CCFFCC"><textarea name="Comments" cols="25" rows="3"><?php echo $row_Advert['Comments']; ?></textarea></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Picture location</strong></td>
              <td bgcolor="#CCFFCC"><label for="checkopentoalloffers"></label>                <input type="file" name="PictureLocation" value="<?php echo $row_Advert['PictureLocation']; ?>" size="20" /></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td height="26" align="right" nowrap="nowrap"><strong>Open to all offers:</strong></td>
              <td bgcolor="#CCFFCC"><input name="checkopentoalloffers" type="checkbox" id="checkopentoalloffers" value="y" <?php if (!(strcmp($row_Advert['opentoalloffers'],"y"))) {echo "checked=\"checked\"";} ?> /></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
          </table>
          <p> </p>
          <div id="submitdiv">
            <input type="hidden" name="MM_update" value="form4" />
            <input name="submit button" type="submit" id="submit button" value="Update Advert" />
          </div>
          <div id="exitdiv">
            <label for="button15"></label>
            <input name="button" type="button" id="button15" onclick="MM_goToURL('parent','Member2.php');return document.MM_returnValue" value="Exit" />
            <label for="button16"></label>
          </div>
          <p> </p>
        </form>
      </fieldset>
      <script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010, isRequired:false});
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010});
var sprytextfield2 = new Spry.Widget.ValidationTextField("sprytextfield2", "integer", {minValue:1900, maxValue:2010, validateOn:["blur"], isRequired:false});
var sprytextfield3 = new Spry.Widget.ValidationTextField("sprytextfield3", "currency", {validateOn:["blur"], isRequired:false});
      </script>
      <br class="clearfloat" />

</div></div></div>
<script type="text/javascript">

</script>
</body>
</html>
<?php
mysql_free_result($Advert);
if (is_resource($Result1)) mysql_free_result($Result1);
?>

Please note,
Removing I investigated spry a little more, in the end I settled for removing spry altogether,
Maybe it was because the text field in a $GET (for the default) AND a $PUT (for the update)

Problems with System Update 3.14.0019 after installation SP2

Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the help

A known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s

Problems with FlashPlayer Update.

Problems with FlashPlayer Update.
after download, install begins, but when the progress bar ends a typical Windows error message displays showing :
(literal translate from spanish):
" is not found the enter point of procedure SetDIIDirectoryW into the dinamic Links Library KERNELL32.dll "
ihave: windows32, XP + FlashPlayer Ver: 11.1.102.55 + MozilaFirefox10.0
flash works ok, but i can't complete a new update since Version: 11.1.102.55
please help me, Thanks

Microsoft Windows XP Professional Version 5.1.2600 Compilacion 2600
(looks like old windows98 / 2000 style but it's XP (i choose the old look in display preferences)
i think it's Service Pack 1 beacause there were problems with SP2 updates with some programs, so this version works Ok with all my software... until now. i Know there's a SP3 and it is an obsolate OS but i like it and works well in this PC.
Do you think that it's the problem? i must install SP3?

Problems with gunnerz update

"Waiting for ICloud" after my Gunnerz update. Any solutions from anyone. Supposedly there's an update coming but I won't hold my breath?

Microsoft Windows XP Professional Version 5.1.2600 Compilacion 2600
(looks like old windows98 / 2000 style but it's XP (i choose the old look in display preferences)
i think it's Service Pack 1 beacause there were problems with SP2 updates with some programs, so this version works Ok with all my software... until now. i Know there's a SP3 and it is an obsolate OS but i like it and works well in this PC.
Do you think that it's the problem? i must install SP3?

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

how can i find out what the fix is that works..please

Sleep wake problems with Yosemite update

Similar Messages

Maybe you are looking for