Sleeping Mountain Lion will not wake up

I have just update to Mountain Lion on my 27inch iMac .
Once it goes to sleep automatcially it will not wake up again. I need to press the power button and reboot the whole system which loses any work I am doing
There was no problem with Lion. The machine would wake up via the mouse click or enter on the keyboard
Has anyone else experience this problem and is ther a setting that neds to be changed somewhere

I suspect now that some widgets, and apps are setting bad hibernatemodes.
source: https://discussions.apple.com/message/19066192#19066192#19066192
I used pmset -g, and it said I was in hibernatemode 5. I set this (sudo pmset -a hibernatemode 0) closed the lid, and it came back up. I set it to 3, and the same. I moved over to my widget, and set it. Checked my mode, and it was back to 5.
I used `man pmset` it said to only use mode 0, 3, and 25! No others! I again set it (sudo pmset -a hibernatemode 25) this time to 25, and it seems to work fine.
I suspect Apple made changes to their power managment, and disabled older modes. They should have set this correctly in our upgrades, instead of letting us figure it out.
[repost from: https://discussions.apple.com/message/19062891?ac_cid=op123456#19062891?ac_cid=o p123456]

Similar Messages

  • HT2404 Mountain Lion will not download through the apps store.  It shows up in Launchpad, but when the screensaver goes on and I enter my password and my desktop shows up, it has disappeared from launchpad.  I have set my energy saver controls appropriate

    Mountain lion will not download thru the apps store.  It has been purchased and redeemed.  I have set my energy settings appropriately so computer will not turn off during download as Verizon offers a connection that is very slow.  I have set the display to go to sleep (which I have set so I have to sign in again).  When I sign in again, Mountain Lion OSX has disappeared from the launchpad.  I have tried this several times.  I do have Norton Internet Security on my Mac Air.  I turned off the idle time scan on the Norton and tried again.  Same results.  Anyone?

    Ask anyone around here, and they will tell you quite differently. AV software will slow down your computer, can be incompatible with software you use, can cause kernel panics and other problems. It is unnecessay since OS X has it's own protection built-in. AV software can no more tell the difference between safe and unsafe sites on your browser than could an elephant.
    But, hey, who am I to argue with your tech person? Please, don't let me sway your opinion. How about a visit to:
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)

  • Mountain Lion will not download to my iMac, "The product distribution file could not be verified.  It may be damaged or was not signed."

    Mountain Lion will not download to my iMac, "The product distribution file could not be verified.  It may be damaged or was not signed."

    I have this problem also. I was able to download Mountain Lion to my daughter's Mac Mini without any trouble. However, I can't download this to my MacBook Pro. I have read other sites that suggest VirusBarrier is the problem and recommend turning it off in VirusBarrier>Preferences>Advanced. I have tried this and it still doesn't work, although some report that it has worked for them.

  • Mail created w/ mountain Lion will not open in SL10.6.8, or OS X yosemite.

    Mail created w/ mountain Lion will not open in SL10.6.8, or OS X yosemite.  How can I convert it to open?

    After a second call to AppleCare, they had advised me differently than before.  Once they found out that my personal computer has Mac OS X Lion installed from the App Store, they suggested I simply upgrade my parents computer to Lion.
    So, I used my download from the App Store and upgraded.  It went smoothly, but Mail still will not open properly.  And instead of the original error message, it comes up with this:
    "Check with your developer to make sure Mail can work with your version of Mac OS X.  You may need to reinstall the application.  Check if there are any updates available for the application."
    How can I re-install just Mail?  A startup disk is not accessible for me right now.  Can I download the latest version of Mail and install it from the Apple.com website?

  • Since installing Mac OS X 10.9.2, when my computer sleeps, it frequently will not wake up, and I have to restart from scratch. Any advice?

    Since installing Mac OS X 10.9.2, when my iMac sleeps, it frequently will not wake, and I have to force a computer restart.

    Kate Bernard wrote:
    The OP said that the computer will not awake from sleep, but did not mention any troulble with WiFi.
    Are the troubleshooting steps for fixing a WiFi connection after waking from sleep relevant to a computer that fails to wake up at all?
    Perhaps.

  • HT4854 Mountain Lion will not download. App just says "download" on purchase button, but nothing happens. Any ideas?

    Mountain Lion will not download. App just says "download" on purchase button, but nothing happens. Any ideas?

    My download took many many hours.  Not sure if that is because of our ISP or load on the network.  I also thought nothing was happening for my download.  Try this:
    Open App Store,
    click on Purchased
    You'll see Mountain Lion being downloaded and it will show the progress and estimated time to complete. 
    Take deep breaths and be patient. 

  • How do I import addresses from Address Book Ver 4.1.2 to the Lion Address Book version 7.0? Mountain Lion will not allow me to open Address book Version 4.1.2

    How do I import addresses from Address Book Ver 4.1.2 to the Lion Address Book version 7.0? Mountain Lion will not allow me to open Address book Version 4.1.2

    Do you have any addresses in the Lion version?
    If not, copy the AddressBook folder from your username/Library/Application Support/ folder on the old mac (or backup).
    Copy it to the same location on your new Mac, replacing the one that is there. Start Address Book in Mountain Lion and it should convert the files to the correct format.
    If you do have addresses, it is a little more complicated.
    First, create a Contacts Archive (from File>Export menu). This will be your backup.
    Next, export the current contacts as vCards.
    Then, follow the steps above.
    Then, import all the cards you exported. If you select all and double-click, it will ask if you want to add them. You'll then have to add them to whatever groups you had set up.

  • Monitor goes into sleep mode and will not wake up

    My monitor goes to sleep and will not wake up.  I try powering off and that will not respond.  I have to unplug the workstation and start back up.  I have turn off sleep to never sleep and now it just goes to sleep when Im working. 

    Hello @rosendahl14,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
    To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    Step 6. Try a different cable connecting your monitor to your computer
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
    Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command Prompt
    Step 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
    reference: http://superuser.com/questions/669571/windows-8-1-​64-bit-power-schemes-gone
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • 21in. imac running Mountain Lion will not start just get grey no entry sign

    21in. imac running Mountain Lion will not start just get grey no entry sign

    David,
    Please carefuly read what Apple says in how to troubleshoot this issue. Also PLEASE complete your profile,we don't even know what iMac you have or the version of OS X it is running.
    Gray screen appears during startup

  • After Sleep, Moutain Lion will not find Network Drives

    Hi all,
    I've upgraded to Mountain Lion on my Late 2011 MacBook Pro 13 and all was well until I've noticed that after sleeping my MacBook will not find any network drives. I only noticed this since TimeMachine came up with an error that it cannot backup due to not being able to find the device on the network, my ReadyNAS Ultra 4 was powered on and TimeMachine backed up to it less than an hour before?
    I've tried an Alt Rt Click on Finder to Relaunch Finder but still my MacBook will not find any network drives until I reboot, or switch off WiFi and then turn it back on?
    Has anybody else come across this since the upgrade to Moutain Lion?
    My MacBook Pro is fully up to date and TimeMachine works well if the MacBook doesn't sleep?
    Many thanks in advance, Jon.

    Surely it's not just me that is experiencing these issues? The latest update mentioned some networked drives but still i'm experiencing the same issues after sleep. If I reboot fine, but not after sleep?
    Can anybody help??
    Jon.

  • HP Desk top Model # 500314 Sleep Mode/Moniter will not wake up

    HP Desk Top Model 500314-  Windows 8.1 OS.
     PC will go into sleep mode but after approx 15/20 minutes when I want to wake it up the PC wakes up but  the moniter will not wake up(just a black screen).
    I have reset the power settings numerious times with all variations! same results. It is strange that the sleep mode works fine for the first 15 to 20 minutes and then the problem appears?
    All other aspects of the PC seem to be working alright. This is a new PC about 2 months old and the problem appeared from the first time it was turned on. All the latest Drivers and Windows updates are installed. HELP!

    Hello @larhoop,
    I understand that you are having issues with your HP Pavilion 500-314 Desktop PC running Windows 8.1 not waking up properly after being asleep for 15-20 minutes. I am providing you with an HP Support document: Troubleshooting sleep and hibernate issues in Windows 8, which has been designed to address issues such as the one you are facing. The steps for Windows 8 and 8.1 are the same so review the document and apply the steps set out within.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Mountain lion will not install because time machine uses hard drive for back up.  What should I do?

    I have downloaded Mountain Lion but it will not allow me to install because the time machine uses the hard drive to back up.  How do I solve this problem?

    Unless you are trying to install on an external hard drive that actually has been used for Time Machine backups, this is usually caused by having a folder named "Backups.backupd" on your hard drive somewhere. It may be at the root level of the hard drive, but may also be elsewhere. Try searching for it, and then delete it. (You shouldn't need it.)

  • Mountain lion will not allow me to download an emailed photo directly to iPhoto

    Since I downloaded Mountain Lion, my iMac lost the capability of saving an emailed photo in iPhoto. The only way I can save the photo - is drag it directly to iPhoto, or drag (multiple) photos to desktop and then drag into iPhoto.Apple Care tells me it's one of the glitches of Mtn Lion.
    has anyone figured out a way around it?

    Do you have any addresses in the Lion version?
    If not, copy the AddressBook folder from your username/Library/Application Support/ folder on the old mac (or backup).
    Copy it to the same location on your new Mac, replacing the one that is there. Start Address Book in Mountain Lion and it should convert the files to the correct format.
    If you do have addresses, it is a little more complicated.
    First, create a Contacts Archive (from File>Export menu). This will be your backup.
    Next, export the current contacts as vCards.
    Then, follow the steps above.
    Then, import all the cards you exported. If you select all and double-click, it will ask if you want to add them. You'll then have to add them to whatever groups you had set up.

  • Mountain lion will not download to my MacBook

    Purchased Mountain Lion in the App store from my MacBook Pro (early '11 version).  All software was updated.  Would not download, instead got a window stating that the product distribution file could not be verified, it may be damaged or was not signed.  Tried to download it to my iMac and it worked just fine.  Also, after NEW updates on my MacBook, Safari will not open.

    What happens when you attempt the purchase?
    Error messages?
    Does your Mac meet all the requirements?

  • Mountain lion will not download on mac air.

    I have a late 2010 mac air, purhcased mountain lion, clicked download and all it does is show me the circling icon at the top of the app store but does not proceed to download it. I can click it as many times as I like but it will not download!! I have restarted computer!! Very frustrating!

    Figured it out. Thanks.

Maybe you are looking for

  • Size of exported pages doc is too big to print on normal computer paper

    My mac is at home but I print things at the office on the office printer with a PC. I export in both pdf and word but when i go to print the size of the pictures and wording is too large and it is ballooned out. How can I get a normal exported size s

  • CS3 'Increase Leading' key not working

    I am trying to use, or create, a keyboard shortcut to increase leading by one of the preset units. The shortcut should be Com+Opt+Shift+' but this is not being recognised. I have tried removing the default shortcut and re-saving this key combination,

  • Photoshop CS4 and HP Photosmart Premium C309

    Hi, I want to print photo's from Photoshop CS4 in another format than A4 (e.g. 10 x 15 cm or 13 x 18), but the program does not accept such a setting. When I finally printed in A4 size (since I could not change that, I finally accepted that) the colo

  • Blueprint for trading company

    hi guru's i got blue print for pharmaceutical company, can i use same blueprint for trading company? in company how blue print is done? can we edit same blueprint? or we need to write this blueprint newly? max compensation!!!!!!!!! Edited by: dev on

  • Sccm 2007 need to pull report of advertisements whose success rate is less then 80%

    sccm 2007 need to pull report of all advertisements whose success rate is less then 80%