Sleeps, then turns off

I am have a recent and perplexing problem - when logged into my computer, after putting it to sleep myself or having the power saver put it to sleep based on my settings, the computer appears to then eventually turn itself off. Without knowing the time-window, each time the computer has gone to sleep the past week I've returned to it and discovered I've needed to turn it back on.
However, what is also strange is that I can't just hit the power button, I need to hold it down, twice, as if I'm forcing it off then turning it on. If it's actually not off when I want to wake it up, it behaves in every way as if it was off.
I have removed all peripherals, etc., but the problem persists, so no externals are causing it. The only instance when the computer sleeps as expected as when I'm logged out of it. Anyone else experience this? Any known causes or fixes?
TIA

There was never an answer to this, but the question is now irrelevant.

Similar Messages

  • Backlight goes on when waking from sleep, then turns off.

    A little bit of water got into the keyboard of my iBook G4 14" last night. Mopped it up and it was fine for two hours after that. This morning, the backlight will not turn on unless you close the display lid, and it will flash on for a split second, then turn off again, which is different from most questions I see posted here. Of course, I can still see the image on the display by putting it close to light. Suggestions?

    Same issue.
    Often my MBP (1.83 GHz, 1.5 GB RAM) will not wake from sleep initially. If I close the cover and wait till the HD goes silent and then reopen, it will wake up. It's interesting though that even while in this condition, if an email comes in, there is a notification chime, so it seems that it is not really sleeping, just that the screen is black.
    There is no problem if the computer has been sleeping for some time (more than 5 or 10 minutes) and the mouse is not moved, the power cord or my external mouse has not been connected or disconnected or the machine has not been moved so that the motion detector notices, but if any of those things hav happened, then it is a problem waking up.
    I've replaced the RAM twice. At Apple Care's suggestion I did an Archive and Install. They suggested that if that did not work, to do an erase and install and then bring in my programs and data piece by piece. they think that it might have been caused by the initial migration of data from my former computer.
    What has Apple Care told you??

  • Laptop waking up from sleep, then turning off

    After I installed snow leapord the only major problem I came across was my computer waking up from sleep mode. Once it wakes up, its on for about 2 minutes then everything turns off. The weird thing is it looks like it goes back to sleep because the macbook pro light where you open the lid is still pulsing, like its trying to wake up. The keyboard lights are off, screen is off. I can hear the disk spinning also. Once it woke up to freeze and go back to sleep.
    Is anyone else having this problem?
    & it only happens when it comes back from closing the lid while the laptop is still on.

    Try resetting some of the hardware involved. See this Apple KB for details, etc.:
    http://support.apple.com/kb/HT1379
    Can't hurt to try, and apparently this has helped others recently.

  • When i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

    when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

    hi
    ... i  have  a similar problem
    but  just  with  the sleep botton.
    fist use  your adapter with other iphone/itouch ... is posible itś the  problem
    second ..  let your  phone charging
    ...normally if  we  conect  our  phone ... after  some minuts  it's put on.
    after 2 hours ... trate   to use  it ... if  after  it  your phone continue same... could  be qaa electrical/physic problem
    please  if you  have a guaranty use it.
    im  sorry but  my english   is terrible.

  • How in Ipad 3.2 setup time go to sleep mode[turn off but not shut down]

    How in Ipad 3.2 setup time go to sleep mode[turn off but not shut down]?

    Go to Settings>General>Auto Lock - tap the arrow and then choose your time setting to put the iPad to sleep.

  • My iPod touch 2nd generation keeps turning the volume up and then turns off, by itself randomly. Please help!!, My iPod touch 2nd generation keeps turning the volume up and then turns off, by itself randomly. Please help!!

    my iPod touch 2nd generation keeps turning the volume up and then turns off by itself randomly. Please help!

    Try the standard fixes in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod
    - Make an appointment at the Genius Bar of an Apple store.

  • IPhone 5 won't stay on after being charged. It is stuck at the apple logo then turns off after 30 second.

    The phone has been fully charged, software OS 8.1.1 lots of storage and fully operational. Any ideas.

    I understand what you are trying to say, but the device is not fully operational, or you wouldn't be here. Does the device go to logo, then turn off, then go to logo again? If not, then you need to first try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. If that does not help, then restore from backup. If the restore from backup is not successful, then restore as new, not from a backup. If the restore from new is not successful, then make an appointment at the Genius Bar of the nearest Apple store or Authorized Apple Service provider, depending on your location and have the hardware checked. You might also want to take a look at this link and see if your iPhone 5 qualifies for the battery replacement program.  https://www.apple.com/support/iphone5-battery/  Go to that site and enter your serial number. If you have trouble restoring, see this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • HELP PLEASE iPod Touch 4G went brown, then static, then turned off

    I was listening to music and looking at photos when my screen flashed brown, then then that static that comes up on a TV came on, then turned off. It isn't turning back on, last week when I connected it to a computer it made a noise, but it's been plugged in for the last 30 minutes and nothings come up on iTunes.
    I've tried holding the sleep and home button... IT DOESNT WORK.
    Help please!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • When I click sleep, Imac turns off not just sleep

    When I click sleep, Imac turns off not just sleep. Any fix?

    Hi Hank,
    Some things to try...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/ht1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964
    (SMC reset=  Shut down, disconnect power cord for 10 seconds, reconnect power cord, wait 5 more seconds, turn computer back on)
    but it is slightly different:   (PMU REST = Shut computer down, disconnect power cord for 10+ seconds, reconnect power cord WHILE SIMULTANEOOUSLY PRESSING POWER BUTTON, let off power button for a few seconds, then press power button again to restart the mac mini.)
    Can also be caused by USB or Firewire devices.

  • When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

    When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

    Have you tried charging it with another known working USB sync cable?  After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • IPhone 4 screen flickering then turning off and when i try to turn it back on it either works or I get a white or purple screen. When i turn it off it doesn't turn back one

    Ok so this started around a week ago. I got home one afternoon put my phone down went back to it and pressed the home button and it seemed that it turned itself off so I tried turning back on, didn't work so I hooked it up to my laptop tried turning it on again it came on but I got a WHITE screen. So after that I decided to leave it for a bit I went to it after it started working fine...until 4 days later. I was on instagram and all of a sudden the screen starts flickering like crazy and then it turned itself off, I did what i did last time and just left it for a bit it came back on working fine. And then about 2 days ago I was listening to music and the screen froze then started flickering (getting quite annoyed at this stage) and then turned off, this time I tried turning it back on straight away only this time it worked. And that brings us to this morning, i was on facebook and about 5 minutes later it starts flickering and freezing once again and then turned itself off. So i hooked it up to my laptop I then got it to turn on for like 6 seconds then the screen started to dim and turned off. That brings us up to now about 10 minutes ago i tried turning it on, it turned on but I got a PURPLE screen and it just stayed like that until i turned it off. Does anybody have any idea what is going on? I think its the screen itself but i'm probably wrong. All help is appreciated.

    I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
    ... This is happening almost most of the time keeping my phone down most of the times.

  • How do I turn off the Genius app in App Store. I've gone to Settings/Privacy/Location Services/System Services then swiped Genius for apps 'off''. Also, I've gone to Settings/ITunes and App Stores/Click on AppleID/View Apple ID and then turn off Genius.

    How do I turn off the Genius app in App Store. I've gone to Settings/Privacy/Location Services/System Services then swiped Genius for apps 'off''. Also, I've gone to Settings/ITunes and App Stores/Click on AppleID/View Apple ID and then turn off Genius. Still nothing has worked. I'm still stuck with Genius offering the same apps to me. Mind you, once I click on the App Store there is nothing I can do but swipe left and right. There's absolutely nothing at the bottom of the screen like a features tab, nothing. There is, however, a categories button at the top, but that's it. Irrelevant.

    FWIW, I just got off the phone with Apple technical support about this.  I use Genuis for creating playlists, so I don't want to disable it, but Apple support confirmed that there is no way to avoid syncing Genius data without disabling Genius altogether.  I'd read somewhere else that subscribing to iTunes Match might allow you to avoid this, but that is NOT the case, as I've confirmed, and Apple support has confirmed.  For me, it routinely syncs thousands genius of items, so I have to allow a lot of time for my manual syncs.

  • Mac book starts to boot, then turns off

    I have Mac Book Pro (13", Yr2011) which will not boot.    It has a 1TB HD which has been partitioned for Mt Lion (primary) and Snow Leopard.  The computer has worked fine in this configuration.    For about 6 wks, the computer was not used and apparently the battery charge depleted to zero.    When an attempt was made to use the computer with battery only, the screen was just light gray with a circular wait icon.    After several minutes with no change, the battery was noted to be discharged.   A charger was connected, but there was no change in the screen.   The computer was then turned off and left to fully charge.   On first attempt to turn on, the computer did come to life.   However, when attempting to Update software, it displayed No Internect connection - even though it was connected by ethernet.     The computer was power cycled, however the screen then again only showed light gray with wait icon.    Now when attempting to boot, the screen shows light gray, circular wait icon & horizontal bar graph indicating something is loading.   After about several minutes, the bar graph fills & disappears, however, the screen remains light gray with wait icon - indefinitely.    On a few attempts, the computer and screen simply turned off after about 30secs. 
    If I hold the Option key while powering on, then the Mac does boot ok to Snow Leopard.   Apparently, the Mt Lion side of the HD was corrupted during the low battery boot appempt.   The last time I backup MtLion was several months ago, so if I prefer not to reformat and reload from scratch.
    Since the Mac did boot up once, I'm wondering if there is a way to recover without having to reformat and start again.
    Don

    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).

  • My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

    My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

    I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.

  • Installed runs for 10 seconds then turns off continues doin it

    i installed firefox 4 it runs for about 10 seconds then turns off i re apply the programe thing runs a short while then turns off i have re installed from different sites several times still no joy

    Which PowerMac is experiencing the issue ? (It's a powermac forum)
    Which Mac OS ?
    and which AirPort software version ? (use Get Info on AirPort Utility)
    Which encryption method are you using on the Mac ? (it's been known to get it wrong)
    ie. WEP 40-bit, WEP 128-bit, WPA, WPA2, WPA2 Personal (open Network Prefs, select AirPort and click Advanced).
    Which encryption method are you using on the WiFi network ? Be exact.
    There's a big difference between WPA, WPA2 and WPA2 Personal (and a few others).
    Does the WiFi device have any filtering on it ? That could be anything from MAC address filtering to only using the wireless N protocol, which may xclude your wireless G (or wireless B) PowerMac.

Maybe you are looking for

  • When are you going to fix the problems with this iOs7 ????

    since I've downloaded iOs7 - everything is  a SLOW-MO!!!  And you can't scale your photos for wallpaper.. Totally disappointed with iOs7

  • Horizontal Scroll bar problem with CL_GUI_ALV_GRID

    Hi Experts, I have created Dynamic ALV by using CL_GUI_ALV_GRID . Everthing is working fine if all the data is displaying in single screen. But if the number of columns increase with the output of data the horizontal scroll bar is not working. It is

  • Search Filter on Forms in 11.1.2.1.0

    Anyone have the issue on Forms where you enter click on the dimension in page and choose the search filter. When you enter the first letter of your search string. It returns something else So when enter S, it doesn't return a list of members that sta

  • Using Content Area

    Hello, How I can control the page of a content area so that it always is within the region of portlet? Thank you

  • Safari can't connect to internet after upgrading to yosemite

    I just updated my early 2009 iMac to Yosemite from the latest version of Mavericks and now Safari, Mail, and Software Update can't connect to the internet but Chrome can (that's how I'm asking this). My internet connection is working, just not for Ap