SLES 11.1 ppc64 vs x86_64 setups
Dear all
Is it possible to run x86_64 setups into SuSE 11.1 ppc64?
I have been installing oracle database 11gR2 setup of x86_64 in SLES 11.1 ppc64, but it fails to lauch runInstaller
Thanx
No, the IBM PowerPC and Intel x86_64 are based on different, incompatible CPU architecture. Oracle 11g may not be available for Linux on the PPC platform like 10g, but apparently it is for Linux on IBM System z and AIX (PPC64).
Edited by: Dude on Jun 16, 2012 3:27 PM
Similar Messages
-
AccAD 2.1 on SLES 10 SP3: Installation issue with compat-libstdc++
Hi everybody,
if someone likes to try the installation of AccAD 2.1 on SLES 10 SP3 (i386 or x86_64), be aware of the following:
After installing the OS with the delivered autoinst.xml, not all libraries needed by AccAD are installed.
If you try to install the AccAD Engine, you will get a message that the following package is missing:
compat-libstdc++
If you ignore this message, after the installation of AccAD it will not work. Especially MaxDB needs this package. You can see this in the installation protokoll that some MaxDB installation steps fail.
Since SLES 10 SP3 this package "compat-libstdc++" is moved to the software packge
libstdc+33 / libstdc+33-32bit
For example on the original SLES 10 SP3 installation DVD, these are the packages
libstdc+33-3.3.3-7.8.1 / libstdc+33-32bit-3.3.3-7.8.1
Install these packages before the installation of AccAD an then install AccAD. Now you can ignore the message of the missing rpm-package "compat-libstdc++".
Regards, Rossi
Edited by: Stephan Roßmanith on Feb 18, 2010 9:49 AMHi Stephan,
Thank you very much for your notes.
This issue has already been fixed in AccAD 2.2.
Best regards,
Yael -
Hello!
I have Primary, two Physical Standby and one Logical Standby Servers.
$ uname -a
Linux host 2.6.39-200.32.1.el6uek.x86_64 #1 SMP Wed Sep 26 23:11:38 PDT 2012 x86_64 x86_64 x86_64 GNU/Linux
$ cat /etc/issue
Oracle Linux Server release 6.3
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> select * from dba_registry;
COMP_ID COMP_NAME VERSION STATUS MODIFIED NAMESPACE CONTROL SCHEMA PROCEDURE STARTUP PARENT_ID OTHER_SCHEMAS
CATALOG Oracle Database Catalog Views 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS SYS DBMS_REGISTRY_SYS.VALIDATE_CATALOG
CATPROC Oracle Database Packages and Types 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS SYS DBMS_REGISTRY_SYS.VALIDATE_CATPROC APPQOSSYS,DBSNMP,DIP,ORACLE_OCM,OUTLN,SYSTEM
OWM Oracle Workspace Manager 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS WMSYS VALIDATE_OWM
XDB Oracle XML Database 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS XDB DBMS_REGXDB.VALIDATEXDB
DGMGRL> connect sys/password
Connected.
DGMGRL> show configuration verbose;
Configuration - work_DataGuardConfig
Protection Mode: MaxAvailability
Databases:
primary - Primary database
physical1 - Physical standby database
physical1 - Physical standby database
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '30'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
$ rpm -qa
kernel-2.6.32-279.5.2.el6.x86_64
system-config-firewall-tui-1.2.27-5.el6.noarch
poppler-data-0.4.0-1.el6.noarch
mesa-dri-drivers-7.11-5.el6.x86_64
ghostscript-fonts-5.50-23.1.el6.noarch
libxml2-python-2.7.6-8.0.1.el6_3.3.x86_64
PyGreSQL-3.8.1-2.el6.x86_64
perl-Time-HiRes-1.9721-127.el6.x86_64
glibc-2.12-1.80.el6_3.5.i686
kernel-2.6.32-279.9.1.el6.x86_64
biosdevname-0.3.11-1.el6.x86_64
device-mapper-1.02.74-10.el6.x86_64
strace-4.5.19-1.11.el6_3.2.x86_64
aic94xx-firmware-30-2.el6.noarch
cpuspeed-1.5-15.el6.x86_64
matahari-network-0.6.0-14.el6.x86_64
rhino-1.7-0.7.r2.2.el6.noarch
elinks-0.12-0.20.pre5.el6.x86_64
libICE-1.0.6-1.el6.x86_64
lvm2-libs-2.02.95-10.el6.x86_64
perl-Crypt-SSLeay-0.57-16.el6.x86_64
libtar-1.2.11-17.el6.x86_64
perl-XML-Twig-3.34-1.el6.noarch
libidn-1.18-2.el6.x86_64
libreport-plugin-logger-2.0.9-5.0.1.el6.x86_64
crda-1.1.1_2010.11.22-1.el6.x86_64
lua-5.1.4-4.1.el6.x86_64
gnutls-2.8.5-4.el6_2.2.x86_64
yp-tools-2.9-12.el6.x86_64
attr-2.4.44-7.el6.x86_64
libtirpc-0.2.1-5.el6.x86_64
file-5.04-13.el6.x86_64
pax-3.4-10.1.el6.x86_64
zip-3.0-1.el6.x86_64
dash-0.5.5.1-3.1.el6.x86_64
latrace-0.5.9-2.el6.x86_64
kexec-tools-2.0.3-3.0.1.el6.x86_64
libasyncns-0.8-1.1.el6.x86_64
libertas-usb8388-firmware-5.110.22.p23-3.1.el6.noarch
nss-softokn-3.12.9-11.el6.x86_64
dbus-python-0.83.0-6.1.el6.x86_64
ql2200-firmware-2.02.08-3.1.el6.noarch
avahi-libs-0.6.25-11.el6.x86_64
nfs-utils-lib-1.1.5-4.el6.x86_64
redhat-indexhtml-6-1.0.2.el6.noarch
boost-regex-1.41.0-11.0.1.el6_1.2.x86_64
rpm-python-4.8.0-27.el6.x86_64
slang-2.2.1-1.el6.x86_64
perl-core-5.10.1-127.el6.x86_64
libselinux-2.0.94-5.3.el6.x86_64
iptables-ipv6-1.4.7-5.1.el6_2.x86_64
audit-libs-2.2-2.el6.x86_64
tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64
keyutils-libs-1.4-4.el6.x86_64
crash-6.0.4-2.el6.x86_64
python-setuptools-0.6.10-3.el6.noarch
perl-libs-5.10.1-127.el6.x86_64
lsof-4.82-4.el6.x86_64
perl-Module-Load-Conditional-0.30-127.el6.x86_64
libusb1-1.0.9-0.5.rc1.el6.x86_64
libunistring-0.9.3-5.el6.x86_64
rsync-3.0.6-9.el6.x86_64
libXi-1.3-3.el6.x86_64
perl-IO-Zlib-1.09-127.el6.x86_64
perl-HTML-Tagset-3.20-4.el6.noarch
libXt-1.0.7-1.el6.x86_64
perl-devel-5.10.1-127.el6.x86_64
boost-wave-1.41.0-11.0.1.el6_1.2.x86_64
scli-1.7.3-50.x86_64
libthai-0.1.12-3.el6.x86_64
perl-Compress-Raw-Bzip2-2.020-127.el6.x86_64
mpfr-2.4.1-6.el6.x86_64
foomatic-db-ppds-4.0-7.20091126.el6.noarch
eggdbus-0.6-3.el6.x86_64
libXxf86misc-1.0.2-1.el6.x86_64
libvisual-0.4.0-9.1.el6.x86_64
mysql-libs-5.1.61-4.el6.x86_64
libnih-1.0.1-7.el6.x86_64
oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
hal-0.5.14-11.el6.x86_64
libgcrypt-1.4.5-9.el6_2.2.x86_64
boost-test-1.41.0-11.0.1.el6_1.2.x86_64
glibc-common-2.12-1.80.el6_3.5.x86_64
mysql-5.1.61-4.el6.x86_64
ncurses-5.7-3.20090208.el6.x86_64
python-qpid-0.14-11.el6_3.noarch
qpid-qmf-0.14-14.0.1.el6_3.x86_64
matahari-lib-0.6.0-14.el6.x86_64
oracle-logos-60.0.11-9.el6.noarch
perl-Module-Build-0.3500-127.el6.x86_64
libhugetlbfs-utils-2.12-2.el6.x86_64
fontpackages-filesystem-1.41-1.1.el6.noarch
perl-Parse-CPAN-Meta-1.40-127.el6.x86_64
openswan-2.6.32-19.el6_3.x86_64
ncurses-libs-5.7-3.20090208.el6.x86_64
e2fsprogs-libs-1.41.12-12.el6.x86_64
dracut-004-284.0.1.el6_3.1.noarch
ConsoleKit-libs-0.4.1-3.el6.x86_64
udev-147-2.42.el6.x86_64
bind-utils-9.8.2-0.10.rc1.el6_3.4.x86_64
iwl5150-firmware-8.24.2.2-1.el6.noarch
unixODBC-devel-2.2.14-11.el6.x86_64
quota-3.17-16.el6.x86_64
xdg-utils-1.0.2-17.20091016cvs.el6.noarch
matahari-broker-0.6.0-14.el6.x86_64
mingetty-1.08-5.el6.x86_64
samba-common-3.5.10-125.el6.x86_64
usermode-1.102-3.el6.x86_64
abrt-addon-ccpp-2.0.8-6.0.1.el6.x86_64
perl-XML-Dumper-0.81-6.el6.noarch
libdhash-0.4.2-9.el6.x86_64
crontabs-1.10-33.el6.noarch
libevent-1.4.13-4.el6.x86_64
mtr-0.75-5.el6.x86_64
atk-1.28.0-2.el6.x86_64
sgpio-1.2.0.10-5.el6.x86_64
rdate-1.4-16.el6.x86_64
boost-system-1.41.0-11.0.1.el6_1.2.x86_64
latencytop-common-0.5-9.el6.x86_64
libsemanage-2.0.43-4.1.el6.x86_64
libtopology-0.3-7.el6.x86_64
libtheora-1.1.0-2.el6.x86_64
atmel-firmware-1.3-7.el6.noarch
cryptsetup-luks-1.2.0-7.el6.x86_64
python-dmidecode-3.10.13-1.el6.x86_64
ipw2200-firmware-3.1-4.el6.noarch
m4-1.4.13-5.el6.x86_64
bfa-firmware-3.0.2.2-1.el6.noarch
python-iwlib-0.1-1.2.el6.x86_64
libedit-2.11-4.20080712cvs.1.el6.x86_64
smartmontools-5.42-2.el6.x86_64
numpy-1.4.1-9.el6.x86_64
libcom_err-1.41.12-12.el6.x86_64
nmap-5.51-2.0.1.el6.x86_64
python-paramiko-1.7.5-2.1.el6.noarch
grep-2.6.3-3.el6.x86_64
tcsh-6.17-19.el6_2.x86_64
db4-4.7.25-17.el6.x86_64
db4-utils-4.7.25-17.el6.x86_64
perl-Params-Check-0.26-127.el6.x86_64
make-3.81-20.el6.x86_64
expat-2.0.1-11.el6_2.x86_64
SDL-1.2.14-3.el6.x86_64
libXext-1.1-3.el6.x86_64
freetype-2.3.11-6.el6_2.9.x86_64
xorg-x11-drv-ati-firmware-6.14.2-9.el6.noarch
libXft-2.1.13-4.1.el6.x86_64
perl-Term-UI-0.20-127.el6.x86_64
perl-XML-Parser-2.36-7.el6.x86_64
libXxf86vm-1.1.0-1.el6.x86_64
perl-Archive-Extract-0.38-127.el6.x86_64
xz-lzma-compat-4.999.9-0.3.beta.20091007git.el6.x86_64
device-mapper-multipath-libs-0.4.9-56.el6_3.1.x86_64
libss-1.41.12-12.el6.x86_64
cloog-ppl-0.15.7-1.2.el6.x86_64
libfprint-0.1.0-19.pre2.el6.x86_64
module-init-tools-3.9-20.0.1.el6.x86_64
desktop-file-utils-0.15-9.el6.x86_64
xorg-x11-utils-7.4-8.el6.x86_64
kbd-1.15-11.el6.x86_64
augeas-libs-0.9.0-4.el6.x86_64
time-1.7-37.1.el6.x86_64
logwatch-7.3.6-49.el6.noarch
plymouth-0.8.3-24.0.1.el6.x86_64
btparser-0.16-3.el6.x86_64
libhugetlbfs-2.12-2.el6.x86_64
python-2.6.6-29.el6_3.3.x86_64
ipa-python-2.2.0-16.el6.x86_64
dbus-1.2.24-7.0.1.el6_3.x86_64
nss-3.13.5-1.0.1.el6_3.x86_64
glibc-headers-2.12-1.80.el6_3.5.x86_64
kernel-uek-2.6.39-200.29.3.el6uek.x86_64
libuser-0.56.13-5.el6.x86_64
foomatic-db-filesystem-4.0-7.20091126.el6.noarch
qpid-tools-0.14-6.el6_3.noarch
perl-ExtUtils-Embed-1.28-127.el6.x86_64
perl-DBD-MySQL-4.013-3.el6.x86_64
iso-codes-3.16-2.el6.noarch
postgresql-server-8.4.13-1.el6_3.x86_64
mesa-libGLU-7.11-5.el6.x86_64
dstat-0.7.0-1.el6.noarch
poppler-utils-0.12.4-3.el6_0.1.x86_64
libX11-common-1.3-2.el6.noarch
fipscheck-lib-1.2.0-7.el6.x86_64
java-1.6.0-openjdk-1.6.0.0-1.49.1.11.4.el6_3.x86_64
pam_krb5-2.3.11-9.el6.x86_64
libcap-2.16-5.5.el6.x86_64
kernel-uek-2.6.39-200.31.1.el6uek.x86_64
polkit-0.96-2.el6_0.1.x86_64
kernel-uek-firmware-2.6.39-200.32.1.el6uek.noarch
setuptool-1.19.9-3.el6.x86_64
popt-1.13-7.el6.x86_64
kernel-uek-2.6.39-200.32.1.el6uek.x86_64
kernel-devel-2.6.32-279.9.1.el6.x86_64
b43-openfwwf-5.2-4.el6.noarch
libacl-2.2.49-6.el6.x86_64
telnet-0.17-47.el6_3.1.x86_64
iwl1000-firmware-39.31.5.1-1.el6.noarch
yum-plugin-security-1.1.30-14.0.1.el6.noarch
readahead-1.5.6-1.el6.x86_64
libldb-0.9.10-23.el6.x86_64
libsepol-2.0.41-4.el6.x86_64
hicolor-icon-theme-0.11-1.1.el6.noarch
shadow-utils-4.1.4.2-13.el6.x86_64
prelink-0.4.6-3.el6.x86_64
ethtool-2.6.33-0.3.el6.x86_64
elfutils-libelf-0.152-1.el6.x86_64
postgresql-odbc-08.04.0200-1.el6.x86_64
iputils-20071127-16.el6.x86_64
sqlite-3.6.20-1.el6.x86_64
mysql-connector-odbc-5.1.5r1144-7.el6.x86_64
findutils-4.4.2-6.el6.x86_64
libcap-ng-0.6.4-3.el6_0.1.x86_64
cyrus-sasl-2.1.23-13.el6.x86_64
ntpdate-4.2.4p8-2.el6.x86_64
nc-1.84-22.el6.x86_64
cronie-anacron-1.4.4-7.el6.x86_64
plymouth-core-libs-0.8.3-24.0.1.el6.x86_64
setserial-2.17-25.el6.x86_64
rfkill-0.3-4.el6.x86_64
lcms-libs-1.19-1.el6.x86_64
ql2100-firmware-1.19.38-3.1.el6.noarch
cyrus-sasl-gssapi-2.1.23-13.el6.x86_64
newt-python-0.52.11-3.el6.x86_64
rt61pci-firmware-1.2-7.el6.noarch
python-iniparse-0.3.1-2.1.el6.noarch
acl-2.2.49-6.el6.x86_64
ipw2100-firmware-1.3-11.el6.noarch
blktrace-1.0.1-6.el6.x86_64
diffutils-2.8.1-28.el6.x86_64
man-pages-3.22-17.el6.noarch
system-config-firewall-base-1.2.27-5.el6.noarch
boost-date-time-1.41.0-11.0.1.el6_1.2.x86_64
yum-metadata-parser-1.1.2-16.el6.x86_64
rpm-libs-4.8.0-27.el6.x86_64
python-nss-0.11-3.el6.x86_64
unixODBC-2.2.14-11.el6.x86_64
libgcc-4.4.6-4.el6.x86_64
gdbm-1.8.0-36.el6.x86_64
libstdc++-4.4.6-4.el6.x86_64
python-dateutil-1.4.1-6.el6.noarch
pcre-7.8-4.el6.x86_64
python-pycurl-7.19.0-8.el6.x86_64
xmlrpc-c-1.16.24-1209.1840.el6.x86_64
python-gudev-147.1-4.el6_0.1.x86_64
libblkid-2.17.2-12.7.el6.x86_64
perl-version-0.77-127.el6.x86_64
perl-Locale-Maketext-Simple-0.18-127.el6.x86_64
perl-IO-Compress-Base-2.020-127.el6.x86_64
abrt-libs-2.0.8-6.0.1.el6.x86_64
perl-Compress-Raw-Zlib-2.020-127.el6.x86_64
libXau-1.0.5-1.el6.x86_64
perl-DBIx-Simple-1.32-3.el6.noarch
binutils-2.20.51.0.2-5.34.el6.x86_64
libXrender-0.9.5-1.el6.x86_64
perl-IO-Compress-Zlib-2.020-127.el6.x86_64
libXcursor-1.1.10-2.el6.x86_64
perl-Log-Message-Simple-0.04-127.el6.x86_64
libXinerama-1.1-1.el6.x86_64
perl-libwww-perl-5.833-2.el6.noarch
libstdc++-devel-4.4.6-4.el6.x86_64
perl-Test-Harness-3.17-127.el6.x86_64
xorg-x11-font-utils-7.2-11.el6.x86_64
libstdc++-4.4.6-4.el6.i686
perl-IPC-Cmd-0.56-127.el6.x86_64
libXv-1.0.5-1.el6.x86_64
elfutils-0.152-1.el6.x86_64
ncurses-static-5.7-3.20090208.el6.x86_64
perl-Module-Loaded-0.02-127.el6.x86_64
gstreamer-tools-0.10.29-1.0.1.el6.x86_64
device-mapper-multipath-0.4.9-56.el6_3.1.x86_64
keyutils-1.4-4.el6.x86_64
iw-0.9.17-4.el6.x86_64
xorg-x11-xauth-1.0.2-7.1.el6.x86_64
coreutils-8.4-19.el6.x86_64
foomatic-4.0.4-1.el6_1.1.x86_64
gcc-4.4.6-4.el6.x86_64
MAKEDEV-3.24-6.el6.x86_64
libdmx-1.1.0-1.el6.x86_64
authconfig-6.1.12-10.el6.x86_64
ksh-20100621-16.el6.x86_64
tar-1.23-7.el6.x86_64
pm-utils-1.2.5-9.el6.x86_64
ed-1.1-3.3.el6.x86_64
iptables-1.4.7-5.1.el6_2.x86_64
hunspell-1.2.8-16.el6.x86_64
nmon-14g-1.el6.rf.x86_64
jasper-libs-1.900.1-15.el6_1.1.x86_64
initscripts-9.03.31-2.0.1.el6_3.1.x86_64
rhn-client-tools-1.0.0-87.0.2.el6.noarch
qpid-cpp-client-0.14-22.0.1.el6_3.x86_64
libipa_hbac-python-1.8.0-32.el6.x86_64
redhat-lsb-graphics-4.0-3.0.1.el6.x86_64
less-436-10.el6.x86_64
postgresql-8.4.13-1.el6_3.x86_64
cracklib-dicts-2.8.16-4.el6.x86_64
logrotate-3.7.8-15.el6.x86_64
fontconfig-2.8.0-3.el6.x86_64
qpid-cpp-server-0.14-22.0.1.el6_3.x86_64
openldap-2.4.23-26.el6_3.2.x86_64
kernel-uek-firmware-2.6.39-200.29.3.el6uek.noarch
perl-CPANPLUS-0.88-127.el6.x86_64
upstart-0.6.5-12.el6.x86_64
saslwrapper-0.14-1.el6.x86_64
net-tools-1.60-110.el6_2.x86_64
device-mapper-event-libs-1.02.74-10.el6.x86_64
openssh-5.3p1-81.el6.x86_64
matahari-consoles-0.6.0-14.el6.x86_64
matahari-python-0.6.0-14.el6.x86_64
dmraid-events-1.0.0.rc16-11.el6.x86_64
tuned-0.2.19-7.el6.noarch
certmonger-0.56-1.el6.x86_64
libreport-plugin-reportuploader-2.0.9-5.0.1.el6.x86_64
abrt-addon-python-2.0.8-6.0.1.el6.x86_64
libreport-plugin-kerneloops-2.0.9-5.0.1.el6.x86_64
libpath_utils-0.2.1-9.el6.x86_64
gtk2-2.18.9-10.el6.x86_64
vim-common-7.2.411-1.8.el6.x86_64
setup-2.8.14-16.el6.noarch
latencytop-0.5-9.el6.x86_64
autofs-5.0.5-54.el6.x86_64
ipa-client-2.2.0-16.el6.x86_64
abrt-cli-2.0.8-6.0.1.el6.x86_64
lvm2-2.02.95-10.el6.x86_64
openssh-clients-5.3p1-81.el6.x86_64
microcode_ctl-1.17-11.el6.x86_64
libcgroup-0.37-4.el6.x86_64
e2fsprogs-1.41.12-12.el6.x86_64
python-psycopg2-2.0.14-1.el6_2.1.x86_64
rhn-setup-1.0.0-87.0.2.el6.noarch
sos-2.2-29.0.1.el6.noarch
psacct-6.3.2-63.el6_3.3.x86_64
cifs-utils-4.8.1-10.el6.x86_64
perl-CGI-3.51-127.el6.x86_64
libicu-4.2.1-9.1.el6_2.x86_64
mcelog-1.0pre3_20110718-0.14.el6.x86_64
ltrace-0.5-23.45svn.el6.x86_64
efibootmgr-0.5.4-10.el6.x86_64
libvorbis-1.2.3-4.el6_2.1.x86_64
ql2500-firmware-5.06.05-1.el6.noarch
curl-7.19.7-26.el6_2.4.x86_64
selinux-policy-targeted-3.7.19-155.0.1.el6_3.4.noarch
jpackage-utils-1.7.5-3.12.el6.noarch
perl-IO-Compress-Bzip2-2.020-127.el6.x86_64
filesystem-2.4.30-3.el6.x86_64
qpid-cpp-server-ssl-0.14-22.0.1.el6_3.x86_64
pciutils-3.1.4-11.el6.x86_64
xml-common-0.6.3-32.el6.noarch
ghostscript-8.70-14.el6_3.1.x86_64
urw-fonts-2.4-10.el6.noarch
iotop-0.3.2-3.el6.noarch
mailcap-2.1.31-2.el6.noarch
libxslt-1.1.26-2.0.2.el6_3.1.x86_64
wget-1.12-1.4.el6.x86_64
nss-softokn-freebl-3.12.9-11.el6.x86_64
openjpeg-libs-1.3-9.el6_3.x86_64
fipscheck-1.2.0-7.el6.x86_64
libattr-2.4.44-7.el6.x86_64
kernel-uek-firmware-2.6.39-200.31.1.el6uek.noarch
info-4.13a-8.el6.x86_64
bind-libs-9.8.2-0.10.rc1.el6_3.4.x86_64
ConsoleKit-0.4.1-3.el6.x86_64
systemtap-runtime-1.7-5.0.1.el6_3.1.x86_64
iwl6000g2b-firmware-17.168.5.2-1.el6.noarch
kernel-uek-headers-2.6.32-300.32.3.el6uek.x86_64
iwl6050-firmware-41.28.5.1-2.el6.noarch
perf-2.6.32-279.9.1.el6.x86_64
gnupg2-2.0.14-4.el6.x86_64
iwl6000-firmware-9.221.4.1-1.el6.noarch
yum-utils-1.1.30-14.0.1.el6.noarch
bzip2-libs-1.0.5-7.el6_0.x86_64
nss_compat_ossl-0.9.6-1.el6.x86_64
gamin-0.1.10-9.el6.x86_64
jline-0.9.94-0.8.el6.noarch
virt-what-1.11-1.1.el6.x86_64
dbus-glib-0.86-5.el6.x86_64
libSM-1.1.0-7.1.el6.x86_64
sigar-1.6.5-0.4.git58097d9.el6.x86_64
pam_passwdqc-1.0.5-6.el6.x86_64
hunspell-en-0.20090216-7.1.el6.noarch
libogg-1.1.4-2.1.el6.x86_64
postfix-2.6.6-2.2.el6_1.x86_64
libgpg-error-1.7-4.el6.x86_64
libtdb-1.2.1-3.el6.x86_64
ntp-4.2.4p8-2.el6.x86_64
mlocate-0.22.2-3.el6.x86_64
cronie-1.4.4-7.el6.x86_64
cyrus-sasl-plain-2.1.23-13.el6.x86_64
pkgconfig-0.23-9.1.el6.x86_64
oddjob-0.30-5.el6.x86_64
libtevent-0.9.8-8.el6.x86_64
hdparm-9.16-3.4.el6.x86_64
traceroute-2.0.14-2.el6.x86_64
gpm-libs-1.20.6-12.el6.x86_64
dosfstools-3.0.9-4.el6.x86_64
eject-2.1.5-17.el6.x86_64
sysvinit-tools-2.87-4.dsf.el6.x86_64
iwl5000-firmware-8.83.5.1_1-1.el6_1.1.noarch
elfutils-libs-0.152-1.el6.x86_64
iwl4965-firmware-228.61.2.24-2.1.el6.noarch
pyOpenSSL-0.10-2.el6.x86_64
rt73usb-firmware-1.8-7.el6.noarch
boost-thread-1.41.0-11.0.1.el6_1.2.x86_64
python-ldap-2.3.10-1.el6.x86_64
gpg-pubkey-ec551f03-4c2d256a
libfontenc-1.0.5-2.el6.x86_64
pygpgme-0.1-18.20090824bzr68.el6.x86_64
libtool-ltdl-2.2.6-15.5.el6.x86_64
python-lxml-2.2.3-1.1.el6.x86_64
mc-4.7.0.2-3.el6.x86_64
newt-0.52.11-3.el6.x86_64
glib2-2.22.5-7.el6.x86_64
nss-util-3.13.5-1.el6_3.x86_64
pytz-2010h-2.el6.noarch
python-urlgrabber-3.9.1-8.el6.noarch
readline-6.0-4.el6.x86_64
perl-Module-Pluggable-3.90-127.el6.x86_64
boost-python-1.41.0-11.0.1.el6_1.2.x86_64
perl-5.10.1-127.el6.x86_64
libpng-1.2.49-1.el6_2.x86_64
perl-URI-1.40-2.el6.noarch
perl-Log-Message-0.02-127.el6.x86_64
perl-Package-Constants-0.02-127.el6.x86_64
libxcb-1.5-1.el6.x86_64
cpio-2.10-10.el6.x86_64
cairo-1.8.8-3.1.el6.x86_64
libipa_hbac-1.8.0-32.el6.x86_64
libXtst-1.0.99.2-3.el6.x86_64
perl-Archive-Tar-1.58-127.el6.x86_64
perl-HTML-Parser-3.64-2.el6.x86_64
libXdamage-1.1.2-1.el6.x86_64
perl-Module-CoreList-2.18-127.el6.x86_64
libgcc-4.4.6-4.el6.i686
libXfont-1.4.1-2.el6_1.x86_64
libXcomposite-0.4.1-2.el6.x86_64
perl-ExtUtils-ParseXS-2.2003.0-127.el6.x86_64
giflib-4.1.6-3.1.el6.x86_64
perl-ExtUtils-CBuilder-0.27-127.el6.x86_64
ncurses-term-5.7-3.20090208.el6.x86_64
tmpwatch-2.9.16-4.el6.x86_64
grubby-7.0.15-3.0.1.el6.x86_64
oracleasm-support-2.1.5-1.el6.x86_64
coreutils-libs-8.4-19.el6.x86_64
cpp-4.4.6-4.el6.x86_64
hal-libs-0.5.14-11.el6.x86_64
redhat-lsb-printing-4.0-3.0.1.el6.x86_64
gcc-c++-4.4.6-4.el6.x86_64
libutempter-1.1.5-4.1.el6.x86_64
liboil-0.3.16-4.1.el6.x86_64
hwdata-0.233-7.8.el6.noarch
libaio-devel-0.3.107-10.el6.x86_64
boost-iostreams-1.41.0-11.0.1.el6_1.2.x86_64
libssh2-1.2.2-11.el6_3.x86_64
compat-libcap1-1.10-1.x86_64
hal-info-20090716-3.1.el6.noarch
vim-minimal-7.2.411-1.8.el6.x86_64
perl-YAML-Syck-1.07-4.el6.x86_64
libcollection-0.6.0-9.el6.x86_64
glibc-2.12-1.80.el6_3.5.x86_64
boost-serialization-1.41.0-11.0.1.el6_1.2.x86_64
oraclelinux-release-6Server-3.0.2.x86_64
openssl-1.0.0-25.el6_3.1.x86_64
dejavu-sans-fonts-2.30-2.el6.noarch
qt-sqlite-4.6.2-24.el6.x86_64
libxml2-2.7.6-8.0.1.el6_3.3.x86_64
groff-1.18.1.4-21.el6.x86_64
ql23xx-firmware-3.03.27-3.1.el6.noarch
cups-libs-1.4.2-48.el6_3.1.x86_64
cracklib-2.8.16-4.el6.x86_64
pcmciautils-015-4.2.el6.x86_64
man-1.6f-30.el6.x86_64
qpid-cpp-client-ssl-0.14-22.0.1.el6_3.x86_64
nss-tools-3.13.5-1.0.1.el6_3.x86_64
alsa-lib-1.0.22-3.el6.x86_64
hwloc-1.1-0.1.el6.x86_64
perl-Test-Simple-0.92-127.el6.x86_64
phonon-backend-gstreamer-4.6.2-24.el6.x86_64
perl-Time-Piece-1.15-127.el6.x86_64
fprintd-0.1-20.git04fd09cfa.el6.x86_64
python-saslwrapper-0.14-1.el6.x86_64
device-mapper-event-1.02.74-10.el6.x86_64
matahari-agent-lib-0.6.0-14.el6.x86_64
matahari-sysconfig-0.6.0-14.el6.x86_64
matahari-rpc-0.6.0-14.el6.x86_64
dmraid-1.0.0.rc16-11.el6.x86_64
matahari-host-0.6.0-14.el6.x86_64
portreserve-0.0.4-9.el6.x86_64
libreport-2.0.9-5.0.1.el6.x86_64
libreport-plugin-mailx-2.0.9-5.0.1.el6.x86_64
abrt-addon-kerneloops-2.0.8-6.0.1.el6.x86_64
libtasn1-2.3-3.el6_2.1.x86_64
libref_array-0.1.1-9.el6.x86_64
file-libs-5.04-13.el6.x86_64
c-ares-1.7.0-6.el6.x86_64
rpcbind-0.2.0-9.el6.x86_64
busybox-1.15.1-15.el6.x86_64
dhclient-4.1.1-31.P1.0.1.el6_3.1.x86_64
vim-enhanced-7.2.411-1.8.el6.x86_64
samba-client-3.5.10-125.el6.x86_64
openssh-server-5.3p1-81.el6.x86_64
rsyslog-5.8.10-2.el6.x86_64
rng-tools-2-13.el6_2.x86_64
fprintd-pam-0.1-20.git04fd09cfa.el6.x86_64
sudo-1.7.4p5-13.el6_3.x86_64
rhn-check-1.0.0-87.0.2.el6.noarch
m2crypto-0.20.2-9.el6.x86_64
gdb-7.2-56.el6.x86_64
audit-2.2-2.el6.x86_64
oprofile-0.9.7-1.el6.x86_64
valgrind-3.6.0-5.el6.x86_64
irqbalance-0.55-35.0.1.el6_3.x86_64
alsa-utils-1.0.22-3.el6.x86_64
dmidecode-2.11-2.el6_1.x86_64
libgomp-4.4.6-4.el6.x86_64
oraclelinux-release-notes-6Server-7.x86_64
xmlrpc-c-client-1.16.24-1209.1840.el6.x86_64
selinux-policy-3.7.19-155.0.1.el6_3.4.noarch
cas-0.15-1.el6.1.noarch
ca-certificates-2010.63-3.el6_1.5.noarch
perl-CPAN-1.9402-127.el6.x86_64
libsndfile-1.0.20-5.el6.x86_64
cups-1.4.2-48.el6_3.1.x86_64
MySQL-python-1.2.3-0.3.c1.1.el6.x86_64
dejavu-fonts-common-2.30-2.el6.noarch
qt-x11-4.6.2-24.el6.x86_64
krb5-workstation-1.9-33.el6_3.3.x86_64
pulseaudio-libs-0.9.21-14.el6_3.x86_64
dracut-kernel-004-284.0.1.el6_3.1.noarch
util-linux-ng-2.17.2-12.7.el6.x86_64
tzdata-java-2012f-1.el6.noarch
iwl100-firmware-39.31.5.1-1.el6.noarch
kpartx-0.4.9-56.el6_3.1.x86_64
mailx-12.4-6.el6.x86_64
yum-3.2.29-40.0.1.el6.noarch
acpid-1.0.10-2.1.el6.x86_64
cyrus-sasl-lib-2.1.23-13.el6.x86_64
hesiod-3.1.0-19.el6.x86_64
usbutils-003-4.el6.x86_64
tcp_wrappers-libs-7.6-57.el6.x86_64
mdadm-3.2.3-9.el6.x86_64
xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64
abrt-2.0.8-6.0.1.el6.x86_64
libnl-1.1-14.el6.x86_64
abrt-tui-2.0.8-6.0.1.el6.x86_64
unzip-6.0-1.el6.x86_64
pciutils-libs-3.1.4-11.el6.x86_64
libini_config-0.6.1-9.el6.x86_64
powertop-1.11-6.el6.x86_64
psmisc-22.6-15.el6_0.1.x86_64
sssd-1.8.0-32.el6.x86_64
pixman-0.18.4-1.el6_0.1.x86_64
bridge-utils-1.2-9.el6.x86_64
boost-filesystem-1.41.0-11.0.1.el6_1.2.x86_64
dhcp-common-4.1.1-31.P1.0.1.el6_3.1.x86_64
ustr-1.0.4-9.1.el6.x86_64
xz-4.999.9-0.3.beta.20091007git.el6.x86_64
nfs-utils-1.2.3-26.el6.x86_64
zd1211-firmware-1.4-4.el6.noarch
checkpolicy-2.0.22-1.el6.x86_64
matahari-0.6.0-14.el6.x86_64
rhnlib-2.5.22-12.0.2.el6.noarch
rootfiles-8.1-6.1.el6.noarch
libusb-0.1.12-23.el6.x86_64
parted-2.1-18.el6.x86_64
gettext-0.17-16.el6.x86_64
pth-2.0.7-9.3.el6.x86_64
system-config-network-tui-1.6.0.el6.2-1.0.3.el6.noarch
python-netaddr-0.7.5-4.el6.noarch
bash-4.1.2-9.el6_2.x86_64
man-pages-overrides-6.3.3-1.el6.noarch
nspr-4.9.1-2.el6_3.x86_64
grub-0.97-77.0.1.el6.x86_64
python-crypto-2.0.1-22.el6.x86_64
sed-4.2.1-10.el6.x86_64
sysstat-9.0.4-20.el6.x86_64
rhnsd-4.9.3-2.0.1.el6.x86_64
perl-Pod-Escapes-1.04-127.el6.x86_64
numactl-2.0.7-3.el6.x86_64
boost-1.41.0-11.0.1.el6_1.2.x86_64
libudev-147-2.42.el6.x86_64
crash-trace-command-1.0-4.el6.x86_64
libX11-1.3-2.el6.x86_64
matahari-core-0.6.0-14.el6.x86_64
ql2400-firmware-5.06.05-1.el6.noarch
libXrandr-1.3.0-4.el6.x86_64
perl-Object-Accessor-0.34-127.el6.x86_64
perl-libxml-perl-0.08-10.el6.noarch
nss-softokn-freebl-3.12.9-11.el6.i686
pycairo-1.8.6-2.1.el6.x86_64
perl-File-Fetch-0.26-127.el6.x86_64
ncurses-libs-5.7-3.20090208.el6.i686
gmp-4.3.1-7.el6_2.2.x86_64
flac-1.2.1-6.1.el6.x86_64
ppl-0.10.2-11.el6.x86_64
python-matplotlib-0.99.1.2-1.el6.x86_64
qt-4.6.2-24.el6.x86_64
patch-2.6-6.el6.x86_64
libXxf86dga-1.1.1-1.el6.x86_64
kbd-misc-1.15-11.el6.noarch
procps-3.2.8-23.el6.x86_64
perl-Date-Manip-6.24-1.el6.noarch
libdrm-2.4.25-2.el6.x86_64
libgfortran-4.4.6-4.el6.x86_64
python-libs-2.6.6-29.el6_3.3.x86_64
python-krbV-1.0.90-3.el6.x86_64
gzip-1.3.12-18.el6.x86_64
dbus-libs-1.2.24-7.0.1.el6_3.x86_64
nss-sysinit-3.13.5-1.0.1.el6_3.x86_64
samba-winbind-clients-3.5.10-125.el6.x86_64
glibc-devel-2.12-1.80.el6_3.5.x86_64
plymouth-scripts-0.8.3-24.0.1.el6.x86_64
basesystem-10.0-4.0.1.el6.noarch
mesa-libGL-7.11-5.el6.x86_64
postgresql-docs-8.4.13-1.el6_3.x86_64
poppler-0.12.4-3.el6_0.1.x86_64
ncurses-base-5.7-3.20090208.el6.x86_64
perl-parent-0.221-127.el6.x86_64
kernel-devel-2.6.32-279.5.2.el6.x86_64
oddjob-mkhomedir-0.30-5.el6.x86_64
zlib-1.2.3-27.el6.x86_64
libselinux-utils-2.0.94-5.3.el6.x86_64
kernel-firmware-2.6.32-279.9.1.el6.noarch
device-mapper-libs-1.02.74-10.el6.x86_64
tzdata-2012f-1.el6.noarch
iwl6000g2a-firmware-17.168.5.3-1.el6.noarch
libjpeg-6b-46.el6.x86_64
policycoreutils-2.0.83-19.24.0.1.el6.x86_64
yum-rhn-plugin-0.9.1-43.0.1.el6.noarch
gpgme-1.1.8-3.el6.x86_64
matahari-service-0.6.0-14.el6.x86_64
libaio-0.3.107-10.el6.x86_64
pinfo-0.6.9-12.el6.x86_64
libtalloc-2.0.1-1.1.el6.x86_64
cryptsetup-luks-libs-1.2.0-7.el6.x86_64
boost-program-options-1.41.0-11.0.1.el6_1.2.x86_64
libreport-python-2.0.9-5.0.1.el6.x86_64
perl-XML-Grove-0.46alpha-40.el6.noarch
which-2.19-6.el6.x86_64
libreport-cli-2.0.9-5.0.1.el6.x86_64
wireless-tools-29-5.1.1.el6.x86_64
bzip2-1.0.5-7.el6_0.x86_64
ypbind-1.20.4-29.el6.x86_64
nano-2.0.9-7.el6.x86_64
libgssglue-0.1-11.el6.x86_64
vconfig-1.9-8.1.el6.x86_64
kernel-2.6.32-279.5.1.el6.x86_64
b43-fwcutter-012-2.2.el6.x86_64
libmng-1.0.10-4.1.el6.x86_64
libffi-3.0.5-3.2.el6.x86_64
ivtv-firmware-20080701-20.2.noarch
python-ethtool-0.6-1.el6.x86_64
iwl3945-firmware-15.32.2.9-4.el6.noarch
bc-1.06.95-1.el6.x86_64
words-3.0-17.el6.noarch
mysql-server-5.1.61-4.el6.x86_64
python-kerberos-1.1-6.2.el6.x86_64
rpm-4.8.0-27.el6.x86_64
libpcap-1.0.0-6.20091201git117cb5.el6.x86_64
passwd-0.77-4.el6_2.2.x86_64
chkconfig-1.3.49.3-2.el6.x86_64
cvs-1.11.23-11.el6_2.1.x86_64
libuuid-2.17.2-12.7.el6.x86_64
perl-DBI-1.609-4.el6.x86_64
at-3.1.10-43.el6_2.1.x86_64
pygobject2-2.20.0-5.el6.x86_64
gawk-3.1.7-9.el6.x86_64
libgudev1-147-2.42.el6.x86_64
python-nose-0.10.4-3.1.el6.noarch
perl-Pod-Simple-3.13-127.el6.x86_64
ntsysv-1.3.49.3-2.el6.x86_64
perl-Module-Load-0.16-127.el6.x86_64
trace-cmd-1.0.5-7.el6.x86_64
theora-tools-1.1.0-2.el6.x86_64
libtiff-3.9.4-6.el6_3.x86_64
perl-DBD-SQLite-1.27-3.el6.x86_64
nfs4-acl-tools-0.3.3-6.el6.x86_64
libXfixes-4.0.4-1.el6.x86_64
perl-Compress-Zlib-2.020-127.el6.x86_64
kernel-devel-2.6.32-279.5.1.el6.x86_64
qt3-3.3.8b-30.el6.x86_64
perl-ExtUtils-MakeMaker-6.55-127.el6.x86_64
boost-graph-1.41.0-11.0.1.el6_1.2.x86_64
ncurses-devel-5.7-3.20090208.el6.x86_64
pango-1.28.1-3.el6_0.5.x86_64
perl-Digest-SHA-5.47-127.el6.x86_64
gstreamer-0.10.29-1.0.1.el6.x86_64
libXmu-1.0.5-1.el6.x86_64
foomatic-db-4.0-7.20091126.el6.noarch
pam-1.1.1-10.el6_2.1.x86_64
tcp_wrappers-7.6-57.el6.x86_64
compat-libstdc++-33-3.2.3-69.el6.x86_64
gstreamer-plugins-base-0.10.29-1.el6.x86_64
pinentry-0.7.6-6.el6.x86_64
elfutils-libelf-devel-0.152-1.el6.x86_64
iproute-2.6.32-20.el6.x86_64
boost-signals-1.41.0-11.0.1.el6_1.2.x86_64
krb5-libs-1.9-33.el6_3.3.x86_64
atlas-3.8.4-2.el6.x86_64
cdparanoia-libs-10.2-5.1.el6.x86_64
postgresql-libs-8.4.13-1.el6_3.x86_64
redhat-lsb-4.0-3.0.1.el6.x86_64
sssd-client-1.8.0-32.el6.x86_64
python-qpid-qmf-0.14-14.0.1.el6_3.x86_64
seekwatcher-0.12-5.el6.noarch
libcurl-7.19.7-26.el6_2.4.x86_64
I want to upgrade my OS from official repository on Primary and Standby Servers. And I have a question:
Will I have a problem with my RDBMS after upgrade OS (e.g. statuses in dba_registry will become INVALID)?It's Ok.
Now I have:
$ cat /etc/issue
Oracle Linux Server release 6.4
No any problem. -
SAP NetWeaver Enterprise Search fails to install on VMWare
Hello,
i try to install SAP NetWeaver Enterprise Search 7.2 from
SLES-10-SP3-SAP-APL-x86_64-GM-DVD1.iso with VMWare Player.
The installation fails at point where i have to choose the location of SAP NetWeaver Enterprise Search.
Here are several options for device://, nfs://, ftp://, usb://, etc.
Because of VMWare i am not sure if i can select them.
1. Is it a must to select at this point of installation the NW ES 7.2? can i do it later on?
2. Why do i have to choose SLES 10 at this point? must i do this?
best regards,
EduardHi Eduard,
regarding your both questions:
1. Is it a must to select at this point of installation the NW ES 7.2? can i do it later on?
The easiest way is to select the installation path of the source files of NWES at this point.
But you can do it as well later but you have to adjust by your own the installation config file "config.dat". This config file is needed by the appliance installer of NWES 7.2
2. Why do i have to choose SLES 10 at this point? must i do this?
Yes. You have to choose SLES 10. This is the only operation systems which is supported by NWES.
Best regards
Frank -
Libdb.so.2 RHEL4 during 10GR2 Companion CD install - HTTP Server
I'm getting the following error in the log file when the install is trying to start the HTTP Server as part of the HTMLDB installation path.
/app/oracle/product/10.2.0.ae/Apache/Apache/bin/apachectl start: execing httpd
/app/oracle/product/10.2.0.ae/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directory
libdb.so.2 does exist under /usr/lib64.
I've compared my libraries against those listed in the installation guide and I appear to be at or higher. I even added gnome-libs-devel after searching other locations for info even though its not listed in the guide.
binutils-2.15.92.0.2-13.0.0.0.2 (x86_64)
compat-db-4.1.25-9 (x86_64)
control-center-2.8.0-12.rhel4.2 (x86_64)
gcc-3.4.4-2 (x86_64)
gcc-c++-3.4.4-2 (x86_64)
glibc-2.3.4-2.13 (i686)
glibc-2.3.4-2.13 (x86_64)
glibc-common-2.3.4-2.13 (x86_64)
gnome-libs-1.4.1.2.90-44.1 (x86_64)
libstdc++-3.4.4-2 (i386)
libstdc++-3.4.4-2 (x86_64)
libstdc++-devel-3.4.4-2 (x86_64)
make-3.80-5 (x86_64)
pdksh-5.2.14-30.3 (x86_64)
sysstat-5.0.5-1 (x86_64)
xscreensaver-4.18-5.rhel4.9 (x86_64)
Setup:
RHEL4 (2.6.9-22.0.2.ELsmp AMD64) x86_64
10.2.0.1 Companion CD (HTMLDB 1.6)
64 Bit Oracle DB (10.2.0.1) installed and running from separate ORACLE_HOME
any assistance would be appreciated?
Thx
Cindy LouSysAdmin friend helped out, so I figured I post the solution.
In my prior research, gnome-libs was pointed as the problem, including info from Metalink, except that I was told libdb.so.2 is not in that library.
I need to install the i386 of compat-db
as root: up2date -u compat-db --arch=i386
as oracle: $ORACLE_HOME/opmn/bin/opmnctl startall
Things started with no errors. Yeah onto configuration.
Cindy Lou -
CC conforming to IEEE but not GCC?
Hi,
Im not sure if this is the right forum, if not then please move it.
I have started working on code which is to run on a sunfire15k server.
I am compiling a serial version of code that was previously developed and run on a 64bit amd machine. Compilation had always taken place using gcc.
Output from the sparc system differs very slightly from the amd system. Only slightly and it looks like rounding errors. An exampleof the different numbers would be:
AMD: -0.324831
SPARC: -0.324832
Although this looks like a very small difference, this value is then used in other programs and the differences between the two platforms gets greater and greater. The code is mainly floating point maths.
I have read about x86 chips using more guard bits for computation - is this true?
Ideally I would like a compiler flag to enable x86 compatibility on the sparc systems. Even if the x86 is doing things incorrectly (which I suspect it is), a large backcatalogue of data has been generated on the x86 platform and proven to be of value.
Any suggestions on how to achieve the same output?
Many thanks
...phobMy application also does lots of double calculations and I am supporting solaris-sparc64,aix-ppc64,linux-x86_64 and MS windows. I can tell you there is little you can do if the problem is the input data.
I am not sure what compilation options you use, but SunCC comes with some highly optimized math libraries. I doubt you have exact replicate with your gcc amd 64 build. Besides, compiler can convert (x / 2.0) to (x * 0.5). I have seen different results merely by switching to a faster sun processor in the same family. I believe I got 14+ significant digit accuracy before subtracting 2 almost identical numbers.
I think you may have to find out where roundoff error is more likely to cause problem and rework your formulas/implementation. -
I have followed these instructions to the letter.
tid (3344085)
"Can the Apache DocumentRoot point to an NSS data volume?"
I'm almost there, I can feel it.
I have the OES11 server up and running attached to edir and NSS volumes working.
But I keep getting "access forbidden!"
I have placed wwwrun with read and file scan rights on the volume and htdocs folder.
What am I dooing wrong?I've got an article on communities that I did for clustering Apache web server on NSS and how it worked.
I used another communities article to get going.
Here's mine:
http://www.novell.com/communities/no...ion-oes2-linux
and here's another one as well:
http://www.novell.com/communities/no...s-apache-oes-2
Note that in my example, you will run into problems (forbidden errors) if you try to use this on an OES2 server that ALSO has iPrint on it.
And this is assuming you're using OES2 (you mentioned SUSE as your solution which is not the same as OES2). If all you want is Apache without using NSS you can use SLES just fine. Although never setup eDir authentication (there's no more mod_edir thingy anymore but I think you can use some LDAP plugin or something instead).
Does this help?
If not, there's log files you can enable/look at to determine why you're getting the forbidden error. I had to do that to determine that it was iPrint causing problems on my clustered host. -
Is there a SCOM install agent for SLES on PPC64?
Is there a SCOM install agent for SLES on PPC64?
Trying to install an agent for SCOM on Suse VM units that are hosted on IBM's power 7 hardware.
While i do see .ppc AIX agent installers I do not see one for SLES on ppc64.
Has anyone installed SCOM on SLES ppc64 or know of a viable agent for the install?To elaborate a bit, Microsoft definitely does not offer an agent for SLES on PowerPC. Linux has been ported to a lot of different processor chip architectures, which is great. But Intel x86/x64 is by far the most popular, and it's the only
chip architecture for which Microsoft supplies an agent for monitoring Linux. As you noted, there is an agent for AIX on PowerPC, but AIX is a very different operating system from Linux, and the agent for AIX on PPC will not work on Linux on PowerPC.
I don't see Microsoft doing an agent for Linux on PowerPC. We would need to see a significant business opportunity for that to change.
I would note that the source code for the OpsMgr agent for Linux/UNIX is available at
http://scx.codeplex.com, along with instructions on how to compile and build the agent. Someone with developer skills in C++, compilers, makefiles, etc. could definitely build an agent for SLES on PowerPC. For
example, I'm aware of someone who has built an agent for Linux running on the IBM S/390 (z-Series) chip architecture running as a guest under zOS and has it working with SC 2012 OpsMgr. But you would be on your own,
perhaps with help from the community, to make that happen.
Michael Kelley, Lead Program Manager, Open Source Technology Center -
11g on SLES 10 x86_64 problem
Hi
I'm trying to install Oracle 11g Database (linux.x64_11gR1_database.zip)
on SLES 10 x86_64 SP1 (2.6.16.46-0.12-smp)
And I've got error while linking:
Exception Name: MakefileException
Exception String: Error in invoking target 'ioracle client_sharedlib' of makefile '/opt/oracle/product/11.1/db/rdbms/lib/ins_rdbms.mk'.
See '/opt/oracle/oraInventory/logs/installActions2007-12-27_08-34-26PM.log' for details.
Exception Severity: 1
and make.log last lines is:
/opt/oracle/product/11.1/db/lib//libctx11.a: could not read symbols: File format not recognized
collect2: ld returned 1 exit status
make: *** [opt/oracle/product/11.1/db/rdbms/lib/oracle] Error 1
Any ideas to solve it?you welcome:
gcc -o /opt/oracle/product/11.1/db/rdbms/lib/oracle -L/opt/oracle/product/11.1/db/rdbms/lib/ -L/opt/oracle/product/11.1/db/lib/ -L/opt/ora
cle/product/11.1/db/lib/stubs/ -Wl,-E /opt/oracle/product/11.1/db/rdbms/lib/opimai.o /opt/oracle/product/11.1/db/rdbms/lib/ssoraed.o /opt
/oracle/product/11.1/db/rdbms/lib/ttcsoi.o -Wl,--whole-archive -lperfsrv11 -Wl,--no-whole-archive /opt/oracle/product/11.1/db/lib/nautab.o
/opt/oracle/product/11.1/db/lib/naeet.o /opt/oracle/product/11.1/db/lib/naect.o /opt/oracle/product/11.1/db/lib/naedhs.o /opt/oracle/produ
ct/11.1/db/rdbms/lib/config.o -lserver11 -lodm11 -lsage11 -lnnet11 -lskgxp11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11
-lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 -lclient11 -lvsn11 -lcommon11 -lgeneric11 -lknlopt `if /usr/bin/ar tv
/opt/oracle/product/11.1/db/rdbms/lib/libknlopt.a | grep xsyeolap.o > /dev/null 2>&1 ; then echo "-loraolap11" ; fi` -lslax11 -lpls11 -lr
t -lplp11 -lserver11 -lclient11 -lvsn11 -lcommon11 -lgeneric11 `if [ -f /opt/oracle/product/11.1/db/lib/libavserver11.a ] ; then echo "-la
vserver11" ; else echo "-lavstub11"; fi` `if [ -f /opt/oracle/product/11.1/db/lib/libavclient11.a ] ; then echo "-lavclient11" ; fi` -lknlo
pt -lslax11 -lpls11 -lrt -lplp11 -ljavavm11 -lserver11 -lwwg `cat /opt/oracle/product/11.1/db/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs
11 -ln11 -lnl11 -lnro11 `cat /opt/oracle/product/11.1/db/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnnz11 -lzt11 -lztkg11
-lmm -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 -lzt
kg11 `cat /opt/oracle/product/11.1/db/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnro11 `cat /opt/oracle/product/11.1/db/li
b/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnnz11 -lzt11 -lztkg11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsn
ls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `if /usr/bin/ar tv /opt/oracle/product/11.1/db/rdbms/lib/libknlopt
.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo11"; fi` -L/opt/oracle/product/11.1/db/ctx/lib/ -lctxc11 -lctx11
-lzx11 -lgx11 -lctx11 -lzx11 -lgx11 -lordimt11 -lclsra11 -ldbcfg11 -lhasgen11 -lcore11 -lskgxn2 -locr11 -locrb11 -locrutl11 -lhasgen11 -
lcore11 -lskgxn2 -loraz -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11
-lcore11 -lnls11 -lsnls11 -lunls11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls1
1 -lnls11 -lcore11 -lnls11 -laio `cat /opt/oracle/product/11.1/db/lib/sysliblist` -Wl,-rpath,/opt/oracle/product/11.1/db/lib -lm `cat
/opt/oracle/product/11.1/db/lib/sysliblist` -ldl -lm -L/opt/oracle/product/11.1/db/lib
/opt/oracle/product/11.1/db/lib//libctx11.a: could not read symbols: File format not recognized
collect2: ld returned 1 exit status
make: *** [opt/oracle/product/11.1/db/rdbms/lib/oracle] Error 1
enough or more? -
Kernel.shmmax on Linux 64 bit (SLES 10 x86_64)
i'm installing 10gR2 on SLES 10 x86_64 bit on a machine with 64 bit xeon processors and i'm a bit confused
about the setting of kernel parameter kernel.shmmax. According to note 373681.1 and other similar notes
of requirements for installations on linux 64 bit it seems that this values can be setted at a maximum of
4gb and i can't understand why. For what i know Oracle tries to allocate SGA on one large shared memory
segment and the parameter kernel.shmmax for what i've understand limits the maximum size of shared memory
segments, with kernel.shmall. So if i set kernel.shmmax to 4 GB i'm not able to set SGA_MAX_SIZE to a value
higher than 4 gb and this is not what i want.
So, why on all notes i've found on the web it is written to set the parameter to a values max of 4 GB????
Regards,
Cristian CudizioOn a 32 bit machine max addressable memory is 2^32-1^ which comes to 2GB considering one parity bit actual usable size for SGA is aroung 1.7-1.8GB. Using VLM/AWE you can increase upto 4gb (which comes to across 3.7GB usable). These are all limits given for 32bit machine which i could come across in metalink but I am not sure where is 4GB limit for 64bit machine specified as i don't have metalink access now. So, I cannot say anything about the doc which haven't seen.
Thanks -
How to setup em for all oracle database templetas X86/X86_64 /10g/11g
Hi: everyone know about Oracle database templates X86/X86_64 /10g/11g all not setup em.
I have builder all Oracle database templates X86/X86_64 can not start em
https://hostname:1158/em
$emctl start dbconsole
to display Oc4j configurate issue......
I have do
$emca -repos create
$emca -config dbcontrol db
$emctl start dbconsole
but still not login em.
Everyone can test it,why can not running.
How to config about em.
thank.Hi:
$emctl status dnconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996,2007 Oracle Corporation .All righs reserved.
https://majin148:5500/em/console/aboutApplication
Oracle Enterprise Manager 11g is running
I am also to try:
#chkconfig iptables off
https://192.168.100.148:5500/em -
Setup of Xwindows - step by step guide for SLES 11.3 reqd
Hi
I have used Unix before but I am new to SLES and I need to run a gui based installer on a new AWS image of SUSE 11.3.
I wanted to remove Putty/SSH complications from the equation so for now, to check if XWindows is working I directly connected to the SLES desktop using xRDP as ec2-user, and from xterm I issued the following commands:
su - root
export TERM=xterm
export DISPLAY=localhost:0.0
After checking the variables, I launched xclock but it fails making me conclude that Xwindows is not correctly configured or running.
Can anyone point me towards a step by step guide on how to setup XWindows, or given my dated knowledge, is there a better way to run a gui-based program?
Regards
RatnaA couple thoughts:
1. If this is just SLES (and not Open Enterprise Server (OES) then you
may want to post in the SUSE forums (https://forums.suse.com/) using the
same credentials that you used to access this site.
2. It sounds like you have X working already since you were able to acess
the system using xRDP. Is there a reason you cannot just start the
installer from there? Alt+F2 to run things usually, I think. If you are
using Gnome, I think 'gksu' or 'gksudo' will start things as a privileged
user from the current non-root user after sufficient credentials are
entered; from the KDE side of things I use 'kdesu' all of the time for the
same thing. This avoids loading a shell, changing to root, forwarding X,
etc. as you are trying to do.
3. Going back to your attempt, I do not see you allowing access to your X
session anywhere so that 'root' can connect with its new process. Before
you change to root, you need to instruct your current X session to allow
other users to throw things onto your desktop (usually not a good thing).
The easy way is to just run 'xhost +' from a shell, maybe before running
'su'; note that if other users are on the system they can now send shells
your way forever, and that may not be fun.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below... -
Db adapter setup with SOA Suite 10.1.3.1 on SLES 9
Unable to deploy any database adapters to BPEL Process Manager on SOA SUITE 10.1.3.1. Components not using a DB Adapter appear to be working ok.
SOA Suite 10.1.3.1 is deployed on SuSe Linux Enterprise Server 9 Intel 64 bit with Jdeveloper 10.1.3.1 on Windows XP 32 Bit
Default deploy of a BPEL suitcase containing a single service using a new BPEL project produces the following error when initiated from within the BPEL Console:
file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_testDatabaseAdapter_1.0_13729157064958ee187241caef4b05f4.tmp/getSequence.wsdl [ getSequence_ptt::getSequence(getSequenceInput_msg,getSequenceOutputCollection) ] - WSIF JCA Execute of operation 'getSequence' failed due to: Adapter Framework unable to create outbound JCA connection.
file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_testDatabaseAdapter_1.0_13729157064958ee187241caef4b05f4.tmp/getSequence.wsdl [ getSequence_ptt::getSequence(getSequenceInput_msg,getSequenceOutputCollection) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12529
ManagedConnectionFactory problem.
Could not instantiate ManagedConnectionFactory oracle.tip.adapter.db.DBManagedConnectionFactory due to:
Missing class: oracle.tip.adapter.db.DBManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /opt/oracle/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.
Please make sure the corresponding JCA Resource Adapter has been deployed.
commented out the jca:address in the WSDL and tried to update oc4j-ra.xml per generated comments
<!--Your runtime connection is declared in
J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml
These mcf properties here are from your design time connection and
save you from having to edit that file and restart the application server
if eis/DB/CISSDBHoneyConn is missing.
These mcf properties are safe to remove.-->
still didn't work. yes did restart application server
tried following the tutorial samples 122.DBAdapter\File2Table README.txt, however the directories mentioned do not exist
created directories and placed an oc4j-ra.xml file as per steps 1 and 2. Restarted application server, checked through Oracle Enterprise Manager, JNDI Browser for a corresponding EIS entry- none available.
tried adding also /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/application-deployments/orabpel/datasources/oc4j-ra.xml
Any ideas on how to correctly configure a DbAdapter under SOA Suite 10.1.3.1 would be appreciated?Same problem also occurred under SLES 10. Notice similar issue in some other threads.
Had to manually install the adapters, replace <pw> with your oc4jadmin password.
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/JmsAdapter.rar -deploymentName JmsAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/DBAdapter.rar -deploymentName DbAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/AqAdapter.rar -deploymentName AqAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/pcapps.rar -deploymentName AppsAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw>deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/fileAdapter.rar -deploymentName FileAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/MQSeriesAdapter.rar -deploymentName MQSeriesAdapter -parent default -
Oracle RAC and ASM for SAP in SLES
Hello,
We are installing our SAP ERP with Oracle RAC 11.2.0.2 on SLES 11 x86_64. According note 527843 (Oracle RAC support in the SAP environment), this is supported for SAP. But as a requirement ASM Cluster File System must be setup.
But when Oracle Grid is installed, ACFS installation returns the following error:
ACFS-9459: ADVM/ACFS is not supported on this OS version: 'sles-release-11.1-1.152'
So Oracle GRID has been installed without ACFS, so we will not be able to use Oracle Clusterware for providing high availability of SAP.
As this is supposed to be a feasible combination (Oracle RAC 11.2.0.2 with ASM on SLES 11 SP1, Netweaver 7.0), I'm wondering if it is a bug, a lack of documentation or something I'm missing.
Kind regards,
FermíRead this below Oracle Note:
ACFS not supported on certain platforms [ID 1075058.1]
oracle@node1:~/app/oracle/product/grid/log/node1> tail -1 alertesiha.log
[client(14083)]CRS-10001:ADVM/ACFS is not supported on SUSE
Then these can be ignored, since ACFS/ADVM may not be supported for your platform. As of this writing, Sun, AIX, SuSE 10 are all supported in 11.2.0.2 only. HP-UX, SuSe 11 and RH6.0, as well as Oracle UEK ((2.6.32-100*) are not yet supported in 11.2.0.2. Keep in mind that this does not prevent your Grid Infrastructure stack (Clusterware and ASM) from starting. This is just an informational message for these platforms
Extract from SAP Note:
RAC 11.2.0.2 (x86 & x86_64 only):
Oracle Clusterware 11.2.0.2 + ASM/ACFS 11.2.0.2 (currently only for SLES10, RHEL5, OL 5.x (without UEK))
Thanks
Srikanth M -
AMD 5650/Intel switchable graphics setup configuration woes
I was wondering if someone could help me with my POS HP DV7-4100 ATI Radeon 5650/Intel switchable graphics setup. I'm so annoyed with this and don't know how to proceed but it looks like I'm not completing the configuration properly.
I have tried seemingly everything so far:
Catalyst w/ Catalyst-utils
Catalyst-hook
Catalyst w & w/out utils-pxp
Catalyst-total-pxp
Anyway, loading catalyst without xorg.conf seems to get me the closest to a working setup but once I log into Cinnamon, I get a message saying that it has loaded in fallback mode and if I would like to try to restart cinnamon (nothing happens).
This leads me to believe that this is a config issue.
This is the dmesg without an xorg.conf file.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask F80000000 write-back
[ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
[ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
[ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
[ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
[ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
[ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009b75e000 00040
[ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
[ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
[ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x25bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
[ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
[ 0.000000] On node 0 totalpages: 2045404
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9881 pages used for memmap
[ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
[ 0.000000] Normal zone: 22272 pages used for memmap
[ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7968736K/8181616K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2527.100 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.79 BogoMIPS (lpj=8423666)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000033] Security Framework initialized
[ 0.000044] AppArmor: AppArmor disabled by boot time parameter
[ 0.000045] Yama: becoming mindful.
[ 0.000537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002402] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003219] Mount-cache hash table entries: 256
[ 0.003418] Initializing cgroup subsys memory
[ 0.003430] Initializing cgroup subsys devices
[ 0.003432] Initializing cgroup subsys freezer
[ 0.003434] Initializing cgroup subsys net_cls
[ 0.003435] Initializing cgroup subsys blkio
[ 0.003456] CPU: Physical Processor ID: 0
[ 0.003457] CPU: Processor Core ID: 0
[ 0.003463] mce: CPU supports 9 MCE banks
[ 0.003473] CPU0: Thermal monitoring enabled (TM1)
[ 0.003483] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.003568] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.004537] ACPI: Core revision 20130725
[ 0.013846] ACPI: All ACPI Tables successfully acquired
[ 0.038849] ftrace: allocating 20318 entries in 80 pages
[ 0.048808] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081797] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
[ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.187283] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.187285] ... version: 3
[ 0.187286] ... bit width: 48
[ 0.187287] ... generic registers: 4
[ 0.187288] ... value mask: 0000ffffffffffff
[ 0.187288] ... max period: 000000007fffffff
[ 0.187289] ... fixed-purpose events: 3
[ 0.187290] ... event mask: 000000070000000f
[ 0.660504] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.647139] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.700394] Brought up 4 CPUs
[ 0.700400] smpboot: Total of 4 processors activated (20224.16 BogoMIPS)
[ 0.702976] devtmpfs: initialized
[ 0.705408] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
[ 0.706249] RTC time: 18:58:44, date: 01/06/14
[ 0.706292] NET: Registered protocol family 16
[ 0.706388] cpuidle: using governor ladder
[ 0.706389] cpuidle: using governor menu
[ 0.706414] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.706416] ACPI: bus type PCI registered
[ 0.706418] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.706482] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.706485] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.713484] PCI: Using configuration type 1 for base access
[ 0.714057] bio: create slab <bio-0> at 0
[ 0.714171] ACPI: Added _OSI(Module Device)
[ 0.714172] ACPI: Added _OSI(Processor Device)
[ 0.714174] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.714175] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.715777] ACPI: EC: Look up EC in DSDT
[ 0.723731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.729362] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.729739] ACPI: Dynamic OEM Table Load:
[ 0.729741] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.729882] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.730243] ACPI: Dynamic OEM Table Load:
[ 0.730245] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.750624] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.751035] ACPI: Dynamic OEM Table Load:
[ 0.751037] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.760515] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.760902] ACPI: Dynamic OEM Table Load:
[ 0.760904] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.813748] ACPI: Interpreter enabled
[ 0.813763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.813769] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.813788] ACPI: (supports S0 S3 S4 S5)
[ 0.813790] ACPI: Using IOAPIC for interrupt routing
[ 0.813825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.813932] ACPI: No dock devices found.
[ 1.447844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 1.447876] \_SB_.PCI0:_OSC invalid UUID
[ 1.447877] _OSC request data:1 8 0
[ 1.447907] \_SB_.PCI0:_OSC invalid UUID
[ 1.447908] _OSC request data:1 1f 0
[ 1.447911] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.447913] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.448565] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
[ 1.448567] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 1.448573] PCI host bridge to bus 0000:00
[ 1.448575] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 1.448577] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.448578] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.448580] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.448581] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
[ 1.448589] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 1.448606] DMAR: Disabling batched IOTLB flush on Ironlake
[ 1.448669] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 1.448699] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.448735] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.448767] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 1.448778] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 1.448783] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.448787] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
[ 1.448892] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 1.448920] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
[ 1.449016] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.449101] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 1.449515] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
[ 1.451973] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.452031] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.452072] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 1.452093] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
[ 1.452188] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.452234] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.452267] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 1.452365] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.452412] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.452444] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 1.452541] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.452588] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.452634] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 1.453043] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
[ 1.455490] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.455548] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.455583] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 1.455686] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.455720] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 1.455888] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 1.455915] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
[ 1.455926] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
[ 1.455937] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
[ 1.455947] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
[ 1.455958] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
[ 1.455969] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
[ 1.456035] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.456106] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 1.456126] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
[ 1.456155] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
[ 1.456246] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 1.456272] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
[ 1.456465] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
[ 1.456479] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.456489] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
[ 1.456496] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
[ 1.456507] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 1.456544] pci 0000:01:00.0: supports D1 D2
[ 1.456587] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
[ 1.456603] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
[ 1.456673] pci 0000:01:00.1: supports D1 D2
[ 1.456730] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.456732] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.456735] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
[ 1.456738] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.456862] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
[ 1.456921] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
[ 1.457132] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.466741] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.466749] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.466756] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
[ 1.466765] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.466869] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 1.466888] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 1.466916] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
[ 1.466934] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[ 1.466946] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 1.467011] pci 0000:03:00.0: supports D1 D2
[ 1.467012] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.467054] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 1.476687] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.476695] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.476702] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
[ 1.476712] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.476826] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 1.476839] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.476840] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.476842] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.476843] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[ 1.477284] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.477332] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.477378] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.477428] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.477474] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.477521] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.477569] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.477615] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.680263] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[ 1.680266] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.680268] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.680328] PCI host bridge to bus 0000:7f
[ 1.680331] pci_bus 0000:7f: root bus resource [bus 7f]
[ 1.680335] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[ 1.680372] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[ 1.680411] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[ 1.680444] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[ 1.680478] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[ 1.680511] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[ 1.680856] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 1.680862] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.680897] ACPI: \_SB_.CPBG: notify handler is installed
[ 1.680908] Found 2 acpi root devices
[ 1.680944] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 1.681029] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.681034] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.681036] vgaarb: loaded
[ 1.681036] vgaarb: bridge control possible 0000:01:00.0
[ 1.681037] vgaarb: no bridge control possible 0000:00:02.0
[ 1.681073] PCI: Using ACPI for IRQ routing
[ 1.685883] PCI: pci_cache_line_size set to 64 bytes
[ 1.685985] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 1.685987] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
[ 1.685988] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
[ 1.686076] NetLabel: Initializing
[ 1.686077] NetLabel: domain hash size = 128
[ 1.686078] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.686090] NetLabel: unlabeled traffic allowed by default
[ 1.686116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.686121] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.688150] Switched to clocksource hpet
[ 1.692075] pnp: PnP ACPI init
[ 1.692093] ACPI: bus type PNP registered
[ 1.692220] pnp 00:00: [dma 4]
[ 1.692249] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.692269] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.692384] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.692417] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.692471] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.692473] system 00:04: [io 0x0800-0x080f] has been reserved
[ 1.692475] system 00:04: [io 0xffff] has been reserved
[ 1.692477] system 00:04: [io 0xffff] has been reserved
[ 1.692479] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 1.692480] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.692482] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.692484] system 00:04: [io 0x0380-0x038e] has been reserved
[ 1.692487] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.692512] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.692543] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.692578] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
[ 1.692691] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 1.692891] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.692893] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.692895] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.692897] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.692899] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[ 1.692900] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.692905] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.692906] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.692908] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
[ 1.692911] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.891768] pnp: PnP ACPI: found 10 devices
[ 1.891775] ACPI: bus type PNP unregistered
[ 1.898277] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 1.898281] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 1.898320] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
[ 1.898323] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.898326] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.898328] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
[ 1.898331] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.898334] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.898337] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.898343] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
[ 1.898347] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.898355] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
[ 1.898356] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.898359] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.898365] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
[ 1.898369] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.898376] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 1.898391] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.898392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.898394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.898395] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.898397] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.898399] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
[ 1.898400] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.898402] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 1.898403] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
[ 1.898405] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.898406] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.898408] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
[ 1.898409] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.898411] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.898413] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.898414] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.898416] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.898448] NET: Registered protocol family 2
[ 1.898658] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.898905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.899101] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.899137] TCP: reno registered
[ 1.899150] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.899184] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.899281] NET: Registered protocol family 1
[ 1.899297] pci 0000:00:02.0: Boot video device
[ 1.924902] PCI: CLS 64 bytes, default 64
[ 1.924949] Unpacking initramfs...
[ 1.973386] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
[ 1.973392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.973394] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
[ 1.973427] Simple Boot Flag at 0x44 set to 0x1
[ 1.973607] Scanning for low memory corruption every 60 seconds
[ 1.973892] audit: initializing netlink socket (disabled)
[ 1.973905] type=2000 audit(1389034724.406:1): initialized
[ 1.984356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.985602] zbud: loaded
[ 1.985767] VFS: Disk quotas dquot_6.5.2
[ 1.985802] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.985955] msgmni has been set to 15569
[ 1.986298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.986347] io scheduler noop registered
[ 1.986349] io scheduler deadline registered
[ 1.986371] io scheduler cfq registered (default)
[ 1.986564] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.986816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.986829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.986868] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 1.986869] vesafb: scrolling: redraw
[ 1.986870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.987210] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
[ 2.194780] Console: switching to colour frame buffer device 200x56
[ 2.401807] fb0: VESA VGA frame buffer device
[ 2.401818] intel_idle: MWAIT substates: 0x1120
[ 2.401819] intel_idle: v0.4 model 0x25
[ 2.401820] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.401952] GHES: HEST is not enabled!
[ 2.402009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.402448] Linux agpgart interface v0.103
[ 2.402509] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.424294] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.424318] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.424413] mousedev: PS/2 mouse device common for all mice
[ 2.426083] rtc_cmos 00:05: RTC can wake from S4
[ 2.426226] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.426258] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.426312] drop_monitor: Initializing network drop monitor service
[ 2.426376] TCP: cubic registered
[ 2.426451] NET: Registered protocol family 10
[ 2.426607] NET: Registered protocol family 17
[ 2.426615] Key type dns_resolver registered
[ 2.426872] registered taskstats version 1
[ 2.427642] Magic number: 14:769:998
[ 2.427665] pnp 00:00: hash matches
[ 2.427763] rtc_cmos 00:05: setting system clock to 2014-01-06 18:58:45 UTC (1389034725)
[ 2.427806] PM: Hibernation image not present or could not be loaded.
[ 2.428656] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 2.428658] Write protecting the kernel read-only data: 8192k
[ 2.430898] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
[ 2.431903] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 2.444295] systemd-udevd[57]: starting version 208
[ 2.454799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.473820] SCSI subsystem initialized
[ 2.474804] ACPI: bus type USB registered
[ 2.474841] usbcore: registered new interface driver usbfs
[ 2.474855] usbcore: registered new interface driver hub
[ 2.474933] usbcore: registered new device driver usb
[ 2.474994] libata version 3.00 loaded.
[ 2.475610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.475775] ehci-pci: EHCI PCI platform driver
[ 2.475950] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.475967] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.475975] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.475992] ehci-pci 0000:00:1a.0: debug port 2
[ 2.479915] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.479939] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
[ 2.487831] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.488136] hub 1-0:1.0: USB hub found
[ 2.488148] hub 1-0:1.0: 3 ports detected
[ 2.488623] ahci 0000:00:1f.2: version 3.0
[ 2.488766] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.488870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 2.488874] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 2.488880] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.508305] scsi0 : ahci
[ 2.508478] scsi1 : ahci
[ 2.508661] scsi2 : ahci
[ 2.508872] scsi3 : ahci
[ 2.509076] scsi4 : ahci
[ 2.509232] scsi5 : ahci
[ 2.509314] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
[ 2.509319] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
[ 2.509322] ata3: DUMMY
[ 2.509324] ata4: DUMMY
[ 2.509328] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
[ 2.509332] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
[ 2.509617] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.509640] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.509655] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.509681] ehci-pci 0000:00:1d.0: debug port 2
[ 2.513619] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.513636] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
[ 2.521138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.521432] hub 2-0:1.0: USB hub found
[ 2.521446] hub 2-0:1.0: 3 ports detected
[ 2.794491] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.827773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.827866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.830049] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
[ 2.831101] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.831251] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
[ 2.831257] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.832374] ata2.00: configured for UDMA/100
[ 2.834382] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.841297] ata1.00: configured for UDMA/133
[ 2.841651] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
[ 2.842799] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
[ 2.918525] hub 1-1:1.0: USB hub found
[ 2.918713] hub 1-1:1.0: 6 ports detected
[ 2.974340] tsc: Refined TSC clocksource calibration: 2527.281 MHz
[ 3.024393] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.148413] hub 2-1:1.0: USB hub found
[ 3.148604] hub 2-1:1.0: 8 ports detected
[ 3.227872] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 3.231028] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
[ 3.231032] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.232183] ata5.00: configured for UDMA/100
[ 3.232540] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
[ 3.236887] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 3.236939] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.236941] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 3.237016] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.237019] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.237035] sd 0:0:0:0: [sda] Write Protect is off
[ 3.237040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.237050] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.237086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.237518] sda: sda1 sda2 sda3 sda4
[ 3.237920] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.237923] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.237954] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.238066] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.280297] sdb: sdb1 sdb3
[ 3.281140] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.320840] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.324133] usbcore: registered new interface driver usbhid
[ 3.324137] usbhid: USB HID core driver
[ 3.324888] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 3.325079] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.1/input0
[ 3.384362] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[ 3.550965] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 3.714287] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[ 3.795307] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.853249] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.854872] systemd[1]: Set hostname to <HP-DV7>.
[ 3.858373] systemd-fstab-generator[118]: Mount point swap is not a valid path, ignoring.
[ 3.909882] systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
[ 3.910099] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.910161] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.910174] systemd[1]: Starting Login Prompts.
[ 3.910186] systemd[1]: Reached target Login Prompts.
[ 3.910195] systemd[1]: Starting Remote File Systems.
[ 3.910203] systemd[1]: Reached target Remote File Systems.
[ 3.910213] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.910241] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.910250] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.910267] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.910276] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.910299] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.910309] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.910330] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.910359] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.910451] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.910465] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.910492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.910501] systemd[1]: Starting Paths.
[ 3.910535] systemd[1]: Reached target Paths.
[ 3.910550] systemd[1]: Starting udev Kernel Socket.
[ 3.910571] systemd[1]: Listening on udev Kernel Socket.
[ 3.910582] systemd[1]: Starting udev Control Socket.
[ 3.910602] systemd[1]: Listening on udev Control Socket.
[ 3.910612] systemd[1]: Starting Journal Socket.
[ 3.910647] systemd[1]: Listening on Journal Socket.
[ 3.910661] systemd[1]: Starting udev Coldplug all Devices...
[ 3.911488] systemd[1]: Starting Apply Kernel Variables...
[ 3.911775] systemd[1]: Mounting Huge Pages File System...
[ 3.912052] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.914336] systemd[1]: Starting Load Kernel Modules...
[ 3.919413] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.920515] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.920540] systemd[1]: Starting Journal Service...
[ 3.920857] systemd[1]: Started Journal Service.
[ 3.934908] systemd-journald[130]: Vacuuming done, freed 0 bytes
[ 3.936662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.936668] ACPI: Power Button [PWRB]
[ 3.936710] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 3.937069] ACPI: Lid Switch [LID0]
[ 3.937129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.937132] ACPI: Power Button [PWRF]
[ 3.938040] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 3.938042] AMD IOMMUv2 functionality not available on this system
[ 3.968968] EXT4-fs (sda4): re-mounted. Opts: discard
[ 3.974125] Switched to clocksource tsc
[ 3.990703] systemd-udevd[155]: starting version 208
[ 3.994113] systemd-journald[130]: Received request to flush runtime journal from PID 1
[ 4.011409] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.011415] Disabling lock debugging due to kernel taint
[ 4.022291] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
[ 4.022509] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
[ 4.022812] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
[ 4.022823] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.023031] <6>[fglrx] Kernel PAT support is enabled
[ 4.023051] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
[ 4.092258] ACPI: Requesting acpi_cpufreq
[ 4.101543] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 4.101553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.101558] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 4.101563] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[ 4.101568] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[ 4.101573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.101575] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 4.101580] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[ 4.101585] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[ 4.101589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.101591] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 4.101595] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[ 4.101600] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[ 4.101604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.101606] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.103941] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 4.104143] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 4.106273] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 4.106627] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 4.106742] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.108091] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 4.108226] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 4.108419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.109161] mei_me 0000:00:16.0: setting latency timer to 64
[ 4.109212] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 4.116824] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[ 4.116833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.125699] [drm] Initialized drm 1.1.0 20060810
[ 4.151578] [Firmware Bug]: Invalid critical threshold (0)
[ 4.152801] hp_accel: hardware type DV7 found
[ 4.153398] lis3lv02d: 8 bits sensor found
[ 4.162429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.162451] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.162458] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[ 4.162734] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 4.163141] [drm] Memory usable by graphics device = 2048M
[ 4.163146] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[ 4.163149] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 4.163171] Console: switching to colour dummy device 80x25
[ 4.163258] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90008efe000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 43
[ 4.163262] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.165071] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.165073] ACPI: Thermal Zone [TZ01] (60 C)
[ 4.167001] i915 0000:00:02.0: setting latency timer to 64
[ 4.189598] Bluetooth: Core ver 2.16
[ 4.189618] NET: Registered protocol family 31
[ 4.189620] Bluetooth: HCI device and connection manager initialized
[ 4.189632] Bluetooth: HCI socket layer initialized
[ 4.189636] Bluetooth: L2CAP socket layer initialized
[ 4.189642] Bluetooth: SCO socket layer initialized
[ 4.189750] cfg80211: Calling CRDA to update world regulatory domain
[ 4.193820] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 4.200427] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 4.200432] Copyright(c) 2003-2013 Intel Corporation
[ 4.200504] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
[ 4.200613] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.200826] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
[ 4.203438] usbcore: registered new interface driver btusb
[ 4.206393] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[ 4.209620] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 4.209634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.209636] [drm] Driver supports precise vblank timestamp query.
[ 4.209838] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 4.212021] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 4.224616] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 4.235557] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.235562] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.235564] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 4.235566] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 4.235664] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4.259013] fbcon: inteldrmfb (fb0) is primary device
[ 4.262350] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.284850] iTCO_vendor_support: vendor-support=0
[ 4.285523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.285561] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 4.285676] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.286793] media: Linux media interface: v0.10
[ 4.290737] Linux video capture interface: v2.00
[ 4.301250] systemd-udevd[174]: renamed network interface eth0 to enp3s0
[ 4.302202] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
[ 4.304880] cfg80211: World regulatory domain updated:
[ 4.304881] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.304883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4.304883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4.304884] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 4.304885] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 4.304886] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 4.304887] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 4.309128] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
[ 4.309335] usbcore: registered new interface driver uvcvideo
[ 4.309336] USB Video Class driver (1.1.1)
[ 4.311646] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 4.316794] ACPI: Battery Slot [BAT0] (battery present)
[ 4.325688] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 4.327465] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 4.328001] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.337248] systemd-udevd[192]: renamed network interface wlan0 to wlo1
[ 4.345739] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.355989] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4.364320] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 4.398187] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4.405698] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 4.414845] ACPI: AC Adapter [ACAD] (on-line)
[ 4.415293] wmi: Mapper loaded
[ 4.435932] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 4.467799] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 4.498300] r8169 0000:03:00.0 enp3s0: link down
[ 4.498337] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.050228] Console: switching to colour frame buffer device 200x56
[ 5.056819] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.056821] i915 0000:00:02.0: registered panic notifier
[ 5.062898] acpi device:02: registered as cooling_device5
[ 5.063042] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.063105] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 5.074847] acpi device:14: registered as cooling_device6
[ 5.081681] acpi device:15: registered as cooling_device7
[ 5.081715] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 5.081795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input12
[ 5.081995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.082246] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5.096419] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
[ 5.114610] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.114695] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.114984] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.115037] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[ 5.123576] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 5.343735] wlo1: authenticate with 04:a1:51:18:3f:5a
[ 5.357336] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
[ 5.360056] wlo1: authenticated
[ 5.363243] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
[ 5.367023] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=1)
[ 5.370719] wlo1: associated
[ 5.370764] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 5.649701] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
[ 5.737424] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 9.301633] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 12.411184] systemd-journald[130]: File /var/log/journal/9f3480e1044d4c389152563598411bae/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 12.848912] fuse init (API version 7.22)
[ 14.026946] traps: cinnamon[570] trap int3 ip:7ff3d815c289 sp:7fffd52060f0 error:0
[ 14.114772] systemd-journald[130]: Deleted empty journal /var/log/journal/9f3480e1044d4c389152563598411bae/[email protected]~ (3256320 bytes).
[ 14.116644] systemd-journald[130]: Vacuuming done, freed 10727424 bytes
[ 14.129219] systemd-journald[130]: Failed to write entry (26 items, 14336620 bytes) despite vacuuming, ignoring: Argument list too long
[ 14.305135] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 14.347792] ISO 9660 Extensions: RRIP_1991A
[ 62.027286] Corrupted low memory at ffff880000006598 (6598 phys) = 100000000000
[ 62.027363] ------------[ cut here ]------------
[ 62.027373] WARNING: CPU: 0 PID: 45 at arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10f/0x120()
[ 62.027375] Memory corruption detected in low memory
[ 62.027417] Modules linked in: nls_utf8 isofs fuse snd_hda_codec_hdmi snd_hda_codec_idt hp_wmi sparse_keymap joydev intel_powerclamp coretemp kvm_intel kvm crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media iTCO_wdt iTCO_vendor_support arc4 iwldvm mac80211 microcode psmouse serio_raw pcspkr btusb iwlwifi bluetooth cfg80211 r8169 snd_hda_intel rfkill hp_accel mii i915 thermal snd_hda_codec lis3lv02d wmi snd_hwdep snd_pcm input_polldev drm_kms_helper snd_page_alloc ac video drm snd_timer i2c_i801 i2c_algo_bit snd battery mei_me i2c_core soundcore intel_agp mei shpchp intel_ips intel_gtt lpc_ich acpi_cpufreq processor evdev fglrx(PO) amd_iommu_v2 button ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod cdrom sd_mod ahci ehci_pci ehci_hcd libahci libata scsi_mod
[ 62.027498] usbcore usb_common
[ 62.027504] CPU: 0 PID: 45 Comm: kworker/0:2 Tainted: P O 3.12.6-1-ARCH #1
[ 62.027506] Hardware name: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[ 62.027511] Workqueue: events check_corruption
[ 62.027513] 0000000000000009 ffff88024f0b5d30 ffffffff814ee4fb ffff88024f0b5d78
[ 62.027518] ffff88024f0b5d68 ffffffff81062bcd 0000000000000000 ffff880000010000
[ 62.027521] ffffffff81a28c50 0000000000000001 ffff880000000000 ffff88024f0b5dc8
[ 62.027525] Call Trace:
[ 62.027534] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
[ 62.027541] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
[ 62.027545] [<ffffffff81062c3c>] warn_slowpath_fmt+0x4c/0x50
[ 62.027548] [<ffffffff8105046f>] check_for_bios_corruption+0x10f/0x120
[ 62.027552] [<ffffffff8105048e>] check_corruption+0xe/0x40
[ 62.027558] [<ffffffff8107dbc7>] process_one_work+0x167/0x450
[ 62.027561] [<ffffffff8107e5d1>] worker_thread+0x121/0x3a0
[ 62.027565] [<ffffffff8107e4b0>] ? manage_workers.isra.23+0x2b0/0x2b0
[ 62.027572] [<ffffffff81084fe0>] kthread+0xc0/0xd0
[ 62.027576] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
[ 62.027581] [<ffffffff814fcffc>] ret_from_fork+0x7c/0xb0
[ 62.027585] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
[ 62.027588] ---[ end trace 7db8b9483b232f3c ]---
[ 379.895022] systemd-journald[130]: Vacuuming done, freed 7458816 bytes
[ 382.437200] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
[ 382.535763] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 382.535904] scsi6 : usb-storage 2-1.1:1.0
[ 382.536046] usbcore: registered new interface driver usb-storage
[ 383.537746] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
[ 383.539529] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 383.541031] sd 6:0:0:0: [sdc] Write Protect is off
[ 383.541037] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 383.542023] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 383.554355] sdc: sdc1
[ 383.558183] sd 6:0:0:0: [sdc] Attached SCSI removable disk
If I run aticonfig --intial, xorg does not start and the dmesg output is:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask F80000000 write-back
[ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bfffffI have toyed with the catalyst-total-pxp configuration and it will now launch x but executing a cinnamon session kicks me back out into the console.
E: Dmesg output and Xorg log both look fine (to me).
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask F80000000 write-back
[ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
[ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
[ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
[ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
[ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
[ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009b75e000 00040
[ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
[ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
[ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x25bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
[ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
[ 0.000000] On node 0 totalpages: 2045404
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9881 pages used for memmap
[ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
[ 0.000000] Normal zone: 22272 pages used for memmap
[ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7968736K/8181616K available (5116K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2527.115 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.82 BogoMIPS (lpj=8423716)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000034] Security Framework initialized
[ 0.000044] AppArmor: AppArmor disabled by boot time parameter
[ 0.000045] Yama: becoming mindful.
[ 0.000540] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002404] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003228] Mount-cache hash table entries: 256
[ 0.003423] Initializing cgroup subsys memory
[ 0.003435] Initializing cgroup subsys devices
[ 0.003437] Initializing cgroup subsys freezer
[ 0.003439] Initializing cgroup subsys net_cls
[ 0.003440] Initializing cgroup subsys blkio
[ 0.003461] CPU: Physical Processor ID: 0
[ 0.003462] CPU: Processor Core ID: 0
[ 0.003467] mce: CPU supports 9 MCE banks
[ 0.003478] CPU0: Thermal monitoring enabled (TM1)
[ 0.003488] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.003577] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.004553] ACPI: Core revision 20130725
[ 0.013862] ACPI: All ACPI Tables successfully acquired
[ 0.040074] ftrace: allocating 20317 entries in 80 pages
[ 0.050041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083030] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
[ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.187282] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.187285] ... version: 3
[ 0.187285] ... bit width: 48
[ 0.187286] ... generic registers: 4
[ 0.187287] ... value mask: 0000ffffffffffff
[ 0.187288] ... max period: 000000007fffffff
[ 0.187289] ... fixed-purpose events: 3
[ 0.187290] ... event mask: 000000070000000f
[ 0.663841] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.650477] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.703729] Brought up 4 CPUs
[ 0.703734] smpboot: Total of 4 processors activated (20225.29 BogoMIPS)
[ 0.706247] devtmpfs: initialized
[ 0.709362] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
[ 0.710207] RTC time: 6:14:18, date: 01/25/14
[ 0.710248] NET: Registered protocol family 16
[ 0.710345] cpuidle: using governor ladder
[ 0.710347] cpuidle: using governor menu
[ 0.710375] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.710377] ACPI: bus type PCI registered
[ 0.710379] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.710443] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.710446] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.717442] PCI: Using configuration type 1 for base access
[ 0.718023] bio: create slab <bio-0> at 0
[ 0.718137] ACPI: Added _OSI(Module Device)
[ 0.718139] ACPI: Added _OSI(Processor Device)
[ 0.718140] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.718141] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.719738] ACPI: EC: Look up EC in DSDT
[ 0.727062] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.732709] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.733085] ACPI: Dynamic OEM Table Load:
[ 0.733087] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.733226] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.733586] ACPI: Dynamic OEM Table Load:
[ 0.733588] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.757289] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.757699] ACPI: Dynamic OEM Table Load:
[ 0.757701] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.767184] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.767569] ACPI: Dynamic OEM Table Load:
[ 0.767571] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.827076] ACPI: Interpreter enabled
[ 0.827091] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.827097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.827117] ACPI: (supports S0 S3 S4 S5)
[ 0.827119] ACPI: Using IOAPIC for interrupt routing
[ 0.827154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.827263] ACPI: No dock devices found.
[ 1.461183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 1.461215] \_SB_.PCI0:_OSC invalid UUID
[ 1.461216] _OSC request data:1 8 0
[ 1.461245] \_SB_.PCI0:_OSC invalid UUID
[ 1.461246] _OSC request data:1 1f 0
[ 1.461249] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.461251] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.461907] PCI host bridge to bus 0000:00
[ 1.461911] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 1.461912] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.461914] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.461915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.461917] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
[ 1.461925] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 1.461941] DMAR: Disabling batched IOTLB flush on Ironlake
[ 1.462003] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 1.462034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.462069] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.462102] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 1.462112] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 1.462118] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.462122] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
[ 1.462225] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 1.462253] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
[ 1.462346] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.462430] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 1.462844] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
[ 1.465285] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.465342] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.465384] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 1.465404] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
[ 1.465500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.465545] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.465580] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 1.465677] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.465723] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.465756] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 1.465853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.465899] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.465946] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 1.466360] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
[ 1.468800] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.468856] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.468891] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 1.468992] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.469026] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 1.469192] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 1.469218] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
[ 1.469229] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
[ 1.469239] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
[ 1.469250] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
[ 1.469261] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
[ 1.469272] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
[ 1.469336] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.469405] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 1.469425] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
[ 1.469455] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
[ 1.469543] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 1.469570] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
[ 1.469761] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
[ 1.469775] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.469785] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
[ 1.469792] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
[ 1.469803] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 1.469840] pci 0000:01:00.0: supports D1 D2
[ 1.469884] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
[ 1.469899] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
[ 1.469966] pci 0000:01:00.1: supports D1 D2
[ 1.470024] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.470027] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.470029] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
[ 1.470032] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.470151] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
[ 1.470195] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
[ 1.470407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.480075] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.480083] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.480090] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
[ 1.480101] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.480205] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 1.480221] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 1.480247] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
[ 1.480264] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[ 1.480276] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 1.480339] pci 0000:03:00.0: supports D1 D2
[ 1.480340] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.480382] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 1.490020] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.490028] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.490035] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
[ 1.490046] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.490160] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 1.490173] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.490174] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.490176] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.490177] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[ 1.490618] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.490666] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.490712] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.490761] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.490808] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.490854] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.490902] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.490948] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.693626] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[ 1.693629] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.693631] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.693691] PCI host bridge to bus 0000:7f
[ 1.693694] pci_bus 0000:7f: root bus resource [bus 7f]
[ 1.693698] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[ 1.693735] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[ 1.693774] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[ 1.693808] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[ 1.693841] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[ 1.693875] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[ 1.694220] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 1.694226] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.694261] ACPI: \_SB_.CPBG: notify handler is installed
[ 1.694272] Found 2 acpi root devices
[ 1.694307] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 1.694393] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.694397] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.694399] vgaarb: loaded
[ 1.694400] vgaarb: bridge control possible 0000:01:00.0
[ 1.694401] vgaarb: no bridge control possible 0000:00:02.0
[ 1.694436] PCI: Using ACPI for IRQ routing
[ 1.699238] PCI: pci_cache_line_size set to 64 bytes
[ 1.699337] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 1.699339] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
[ 1.699340] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
[ 1.699428] NetLabel: Initializing
[ 1.699429] NetLabel: domain hash size = 128
[ 1.699430] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.699443] NetLabel: unlabeled traffic allowed by default
[ 1.699467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.699472] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.701500] Switched to clocksource hpet
[ 1.705449] pnp: PnP ACPI init
[ 1.705466] ACPI: bus type PNP registered
[ 1.705591] pnp 00:00: [dma 4]
[ 1.705621] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.705641] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.705757] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.705791] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.705846] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.705848] system 00:04: [io 0x0800-0x080f] has been reserved
[ 1.705850] system 00:04: [io 0xffff] has been reserved
[ 1.705852] system 00:04: [io 0xffff] has been reserved
[ 1.705853] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 1.705855] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.705857] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.705858] system 00:04: [io 0x0380-0x038e] has been reserved
[ 1.705861] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.705887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.705918] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.705955] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
[ 1.706069] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 1.706268] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.706270] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.706272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.706274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.706275] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[ 1.706277] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.706281] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.706283] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.706285] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
[ 1.706287] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.905114] pnp: PnP ACPI: found 10 devices
[ 1.905115] ACPI: bus type PNP unregistered
[ 1.911635] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 1.911639] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 1.911677] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
[ 1.911680] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.911682] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.911685] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
[ 1.911687] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.911691] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.911694] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.911699] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
[ 1.911704] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.911711] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
[ 1.911713] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.911716] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.911721] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
[ 1.911726] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.911733] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 1.911747] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.911749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.911750] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.911752] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.911753] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.911755] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
[ 1.911756] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.911758] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 1.911760] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
[ 1.911761] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.911763] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.911764] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
[ 1.911766] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.911767] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.911769] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.911770] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.911772] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.911805] NET: Registered protocol family 2
[ 1.912015] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.912263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.912459] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.912493] TCP: reno registered
[ 1.912506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.912542] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.912641] NET: Registered protocol family 1
[ 1.912657] pci 0000:00:02.0: Boot video device
[ 1.938251] PCI: CLS 64 bytes, default 64
[ 1.938297] Unpacking initramfs...
[ 1.987010] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
[ 1.987017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.987019] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
[ 1.987050] Simple Boot Flag at 0x44 set to 0x1
[ 1.987234] Scanning for low memory corruption every 60 seconds
[ 1.987523] audit: initializing netlink socket (disabled)
[ 1.987536] type=2000 audit(1390630458.423:1): initialized
[ 1.998005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.999257] zbud: loaded
[ 1.999421] VFS: Disk quotas dquot_6.5.2
[ 1.999457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.999614] msgmni has been set to 15569
[ 1.999955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.000004] io scheduler noop registered
[ 2.000006] io scheduler deadline registered
[ 2.000029] io scheduler cfq registered (default)
[ 2.000219] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.000474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.000487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.000526] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 2.000528] vesafb: scrolling: redraw
[ 2.000529] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.000872] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
[ 2.208493] Console: switching to colour frame buffer device 200x56
[ 2.415572] fb0: VESA VGA frame buffer device
[ 2.415583] intel_idle: MWAIT substates: 0x1120
[ 2.415585] intel_idle: v0.4 model 0x25
[ 2.415585] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.415721] GHES: HEST is not enabled!
[ 2.415778] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.416220] Linux agpgart interface v0.103
[ 2.416282] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.437802] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.437825] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.437928] mousedev: PS/2 mouse device common for all mice
[ 2.439572] rtc_cmos 00:05: RTC can wake from S4
[ 2.439720] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.439752] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.439804] drop_monitor: Initializing network drop monitor service
[ 2.439867] TCP: cubic registered
[ 2.439942] NET: Registered protocol family 10
[ 2.440100] NET: Registered protocol family 17
[ 2.440110] Key type dns_resolver registered
[ 2.440362] registered taskstats version 1
[ 2.441127] Magic number: 14:648:216
[ 2.441252] rtc_cmos 00:05: setting system clock to 2014-01-25 06:14:19 UTC (1390630459)
[ 2.441297] PM: Hibernation image not present or could not be loaded.
[ 2.442333] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 2.442335] Write protecting the kernel read-only data: 8192k
[ 2.444650] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
[ 2.445600] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 2.458198] systemd-udevd[57]: starting version 208
[ 2.466960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.485606] SCSI subsystem initialized
[ 2.487357] ACPI: bus type USB registered
[ 2.487410] usbcore: registered new interface driver usbfs
[ 2.487487] libata version 3.00 loaded.
[ 2.487522] usbcore: registered new interface driver hub
[ 2.487576] usbcore: registered new device driver usb
[ 2.488154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.488305] ehci-pci: EHCI PCI platform driver
[ 2.488453] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.488473] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.488484] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.488507] ehci-pci 0000:00:1a.0: debug port 2
[ 2.492709] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.492734] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
[ 2.501178] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.501456] hub 1-0:1.0: USB hub found
[ 2.501468] hub 1-0:1.0: 3 ports detected
[ 2.501772] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.501779] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.501786] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.501801] ehci-pci 0000:00:1d.0: debug port 2
[ 2.505713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.505733] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
[ 2.514513] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.514735] hub 2-0:1.0: USB hub found
[ 2.514741] hub 2-0:1.0: 3 ports detected
[ 2.514993] ahci 0000:00:1f.2: version 3.0
[ 2.515120] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.515225] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 2.515229] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 2.515236] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.535192] scsi0 : ahci
[ 2.535558] scsi1 : ahci
[ 2.535764] scsi2 : ahci
[ 2.535955] scsi3 : ahci
[ 2.536149] scsi4 : ahci
[ 2.536359] scsi5 : ahci
[ 2.536451] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
[ 2.536457] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
[ 2.536459] ata3: DUMMY
[ 2.536462] ata4: DUMMY
[ 2.536467] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
[ 2.536471] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
[ 2.807839] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.854462] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.854564] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.854611] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.854735] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.856919] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
[ 2.859217] ata2.00: configured for UDMA/100
[ 2.861881] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
[ 2.861886] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.871886] ata1.00: configured for UDMA/133
[ 2.872196] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
[ 2.873244] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
[ 2.903929] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
[ 2.903933] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.905148] ata5.00: configured for UDMA/100
[ 2.905285] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
[ 2.909966] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.910041] sd 0:0:0:0: [sda] Write Protect is off
[ 2.910048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.910091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.910499] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.910501] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 2.910526] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.910528] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.910540] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.910633] sda: sda1 sda2 sda3 sda4
[ 2.911010] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.911016] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.911095] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.911204] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.932118] hub 1-1:1.0: USB hub found
[ 2.932226] hub 1-1:1.0: 6 ports detected
[ 2.953159] sdb: sdb1 sdb3
[ 2.953757] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.987624] tsc: Refined TSC clocksource calibration: 2527.285 MHz
[ 3.037677] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.161529] hub 2-1:1.0: USB hub found
[ 3.161615] hub 2-1:1.0: 8 ports detected
[ 3.241106] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[ 3.333324] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.336248] usbcore: registered new interface driver usbhid
[ 3.336250] usbhid: USB HID core driver
[ 3.336850] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[ 3.337086] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.2/input0
[ 3.397519] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[ 3.486816] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.546180] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.548701] systemd[1]: Set hostname to <HP-DV7>.
[ 3.553751] systemd-fstab-generator[119]: Mount point swap is not a valid path, ignoring.
[ 3.564291] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 3.601149] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.601160] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.601361] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.601419] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.601433] systemd[1]: Starting Remote File Systems.
[ 3.602633] systemd[1]: Reached target Remote File Systems.
[ 3.602645] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.604045] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.604055] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.605524] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.605534] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.606751] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.606760] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.608067] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.608103] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.610164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.610180] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.610209] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.610218] systemd[1]: Starting Paths.
[ 3.611135] systemd[1]: Reached target Paths.
[ 3.611150] systemd[1]: Starting udev Kernel Socket.
[ 3.612271] systemd[1]: Listening on udev Kernel Socket.
[ 3.612284] systemd[1]: Starting udev Control Socket.
[ 3.613423] systemd[1]: Listening on udev Control Socket.
[ 3.613435] systemd[1]: Starting Journal Socket.
[ 3.614518] systemd[1]: Listening on Journal Socket.
[ 3.614535] systemd[1]: Starting udev Coldplug all Devices...
[ 3.616439] systemd[1]: Starting Apply Kernel Variables...
[ 3.617780] systemd[1]: Mounting Huge Pages File System...
[ 3.619103] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.622065] systemd[1]: Starting Load Kernel Modules...
[ 3.626618] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.629265] systemd[1]: Starting Set Up Additional Binary Formats...
[ 3.630812] systemd[1]: Starting Journal Service...
[ 3.633257] systemd[1]: Started Journal Service.
[ 3.643151] systemd-journald[134]: Vacuuming done, freed 0 bytes
[ 3.643416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.643422] ACPI: Power Button [PWRB]
[ 3.643483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 3.643552] EXT4-fs (sda4): re-mounted. Opts: discard
[ 3.643855] ACPI: Lid Switch [LID0]
[ 3.643927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.643930] ACPI: Power Button [PWRF]
[ 3.644676] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 3.644679] AMD IOMMUv2 functionality not available on this system
[ 3.705533] systemd-udevd[157]: starting version 208
[ 3.714133] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[ 3.723418] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 3.723419] Disabling lock debugging due to kernel taint
[ 3.734452] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
[ 3.734648] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
[ 3.734918] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
[ 3.734926] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 3.735095] <6>[fglrx] Kernel PAT support is enabled
[ 3.735114] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
[ 3.783368] ACPI: Requesting acpi_cpufreq
[ 3.784868] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.785719] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 3.785798] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.786504] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 3.786902] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 3.787185] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 3.787188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.787192] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 3.787195] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[ 3.787198] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[ 3.787198] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.787200] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 3.787203] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[ 3.787205] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[ 3.787206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.787208] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 3.787210] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[ 3.787213] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[ 3.787213] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.787214] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.788226] mei_me 0000:00:16.0: setting latency timer to 64
[ 3.788279] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 3.803478] hp_accel: hardware type DV7 found
[ 3.804108] lis3lv02d: 8 bits sensor found
[ 3.806403] [drm] Initialized drm 1.1.0 20060810
[ 3.817825] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.820698] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 3.821478] scsi6 : usb-storage 2-1.1:1.0
[ 3.822190] usbcore: registered new interface driver usb-storage
[ 3.836293] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 3.840807] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 3.842785] [Firmware Bug]: Invalid critical threshold (0)
[ 3.848265] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.848278] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.848284] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[ 3.848512] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[ 3.848684] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90000c4e000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 44
[ 3.848685] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.848994] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.848996] ACPI: Thermal Zone [TZ01] (60 C)
[ 3.854926] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.855035] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.855410] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 3.855479] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 3.856762] [drm] Memory usable by graphics device = 2048M
[ 3.856877] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[ 3.856906] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.861908] cfg80211: Calling CRDA to update world regulatory domain
[ 3.867315] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
[ 3.872505] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 3.873734] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 3.873734] Copyright(c) 2003-2013 Intel Corporation
[ 3.873811] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
[ 3.875297] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.875446] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
[ 3.879450] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[ 3.879788] Bluetooth: Core ver 2.16
[ 3.881003] NET: Registered protocol family 31
[ 3.881005] Bluetooth: HCI device and connection manager initialized
[ 3.881016] Bluetooth: HCI socket layer initialized
[ 3.881019] Bluetooth: L2CAP socket layer initialized
[ 3.881026] Bluetooth: SCO socket layer initialized
[ 3.883938] usbcore: registered new interface driver btusb
[ 3.884347] Console: switching to colour dummy device 80x25
[ 3.886414] i915 0000:00:02.0: setting latency timer to 64
[ 3.892348] ACPI: AC Adapter [ACAD] (on-line)
[ 3.906181] systemd-journald[134]: Received request to flush runtime journal from PID 1
[ 3.910134] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 3.910140] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 3.910142] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 3.910145] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 3.910257] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3.930630] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 3.930654] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.930656] [drm] Driver supports precise vblank timestamp query.
[ 3.931084] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 3.934147] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 3.936986] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.950834] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 3.966690] fbcon: inteldrmfb (fb0) is primary device
[ 3.987780] Switched to clocksource tsc
[ 3.996141] iTCO_vendor_support: vendor-support=0
[ 3.996902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 3.996972] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 3.997186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.022206] systemd-udevd[171]: renamed network interface eth0 to enp3s0
[ 4.023553] cfg80211: World regulatory domain updated:
[ 4.023554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.023555] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4.023556] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4.023557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 4.023558] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 4.023558] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 4.023559] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 4.080995] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 4.098822] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 4.099319] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 4.099803] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.100209] ACPI: Battery Slot [BAT0] (battery present)
[ 4.100361] wmi: Mapper loaded
[ 4.103136] input: HP WMI hotkeys as /devices/virtual/input/input13
[ 4.104748] systemd-udevd[164]: renamed network interface wlan0 to wlo1
[ 4.125347] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.240631] media: Linux media interface: v0.10
[ 4.244154] Linux video capture interface: v2.00
[ 4.252000] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
[ 4.257341] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
[ 4.257488] usbcore: registered new interface driver uvcvideo
[ 4.257489] USB Video Class driver (1.1.1)
[ 4.770357] Console: switching to colour frame buffer device 200x56
[ 4.778627] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.778629] i915 0000:00:02.0: registered panic notifier
[ 4.785739] acpi device:02: registered as cooling_device5
[ 4.785956] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.786022] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 4.797354] acpi device:14: registered as cooling_device6
[ 4.802976] acpi device:15: registered as cooling_device7
[ 4.803025] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 4.803087] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input16
[ 4.803440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.803977] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 4.805256] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 4.805400] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[ 4.805408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.824848] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
[ 4.827187] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 4.828646] sd 6:0:0:0: [sdc] Write Protect is off
[ 4.828651] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 4.830784] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.839857] sdc: sdc1
[ 4.843514] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 4.894625] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4.902120] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 4.937012] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4.944514] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 4.978524] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.038118] r8169 0000:03:00.0 enp3s0: link down
[ 5.038174] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.376682] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
[ 5.470179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 5.851763] wlo1: authenticate with 04:a1:51:18:3f:5a
[ 5.865752] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
[ 5.868512] wlo1: authenticated
[ 5.869715] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
[ 5.873551] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=2)
[ 5.876272] wlo1: associated
[ 5.876327] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 38.341494] fuse init (API version 7.22)
Xorg.0.log
[ 20.932]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 20.932] X Protocol Version 11, Revision 0
[ 20.932] Build Operating System: Linux 3.12.6-1-ARCH x86_64
[ 20.932] Current Operating System: Linux HP-DV7 3.12.8-1-ARCH #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014 x86_64
[ 20.932] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
[ 20.932] Build Date: 08 January 2014 01:35:51PM
[ 20.932]
[ 20.932] Current version of pixman: 0.32.4
[ 20.932] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.932] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.932] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 25 01:16:07 2014
[ 20.935] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.938] (==) No Layout section. Using the first Screen section.
[ 20.938] (==) No screen section available. Using defaults.
[ 20.938] (**) |-->Screen "Default Screen Section" (0)
[ 20.938] (**) | |-->Monitor "<default monitor>"
[ 20.938] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 20.938] (**) | |-->Device "Intel Graphics"
[ 20.938] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.938] (==) Automatically adding devices
[ 20.938] (==) Automatically enabling devices
[ 20.938] (==) Automatically adding GPU devices
[ 20.947] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 20.947] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 20.947] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.947] (II) Loader magic: 0x7fac20
[ 20.947] (II) Module ABI versions:
[ 20.947] X.Org ANSI C Emulation: 0.4
[ 20.947] X.Org Video Driver: 14.1
[ 20.947] X.Org XInput driver : 19.1
[ 20.947] X.Org Server Extension : 7.0
[ 20.947] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.948] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[ 20.949] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 20.949] Initializing built-in extension Generic Event Extension
[ 20.949] Initializing built-in extension SHAPE
[ 20.949] Initializing built-in extension MIT-SHM
[ 20.949] Initializing built-in extension XInputExtension
[ 20.949] Initializing built-in extension XTEST
[ 20.949] Initializing built-in extension BIG-REQUESTS
[ 20.949] Initializing built-in extension SYNC
[ 20.949] Initializing built-in extension XKEYBOARD
[ 20.949] Initializing built-in extension XC-MISC
[ 20.949] Initializing built-in extension SECURITY
[ 20.949] Initializing built-in extension XINERAMA
[ 20.949] Initializing built-in extension XFIXES
[ 20.949] Initializing built-in extension RENDER
[ 20.949] Initializing built-in extension RANDR
[ 20.949] Initializing built-in extension COMPOSITE
[ 20.949] Initializing built-in extension DAMAGE
[ 20.949] Initializing built-in extension MIT-SCREEN-SAVER
[ 20.950] Initializing built-in extension DOUBLE-BUFFER
[ 20.950] Initializing built-in extension RECORD
[ 20.950] Initializing built-in extension DPMS
[ 20.950] Initializing built-in extension X-Resource
[ 20.950] Initializing built-in extension XVideo
[ 20.950] Initializing built-in extension XVideo-MotionCompensation
[ 20.950] Initializing built-in extension XFree86-VidModeExtension
[ 20.950] Initializing built-in extension XFree86-DGA
[ 20.950] Initializing built-in extension XFree86-DRI
[ 20.950] Initializing built-in extension DRI2
[ 20.950] (II) LoadModule: "glx"
[ 20.951] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[ 20.954] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.954] compiled for 6.9.0, module version = 1.0.0
[ 20.954] Loading extension GLX
[ 20.954] (II) LoadModule: "intel"
[ 20.955] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.959] (II) Module intel: vendor="X.Org Foundation"
[ 20.959] compiled for 1.14.2, module version = 2.21.15
[ 20.959] Module class: X.Org Video Driver
[ 20.959] ABI class: X.Org Video Driver, version 14.1
[ 20.959] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 20.960] (++) using VT number 1
[ 20.963] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.963] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.963] (==) intel(0): RGB weight 888
[ 20.963] (==) intel(0): Default visual is TrueColor
[ 20.963] (**) intel(0): Option "AccelMethod" "sna"
[ 20.964] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 20.964] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 20.964] (**) intel(0): Framebuffer tiled
[ 20.964] (**) intel(0): Pixmaps tiled
[ 20.964] (**) intel(0): "Tear free" disabled
[ 20.964] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 20.964] (II) intel(0): Output LVDS1 has no monitor section
[ 20.965] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 20.965] (II) intel(0): Output VGA1 has no monitor section
[ 20.965] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 20.965] (==) intel(0): DPI set to (96, 96)
[ 20.965] (II) Loading sub module "dri2"
[ 20.965] (II) LoadModule: "dri2"
[ 20.965] (II) Module "dri2" already built-in
[ 20.965] (==) Depth 24 pixmap format is 32 bpp
[ 20.969] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 20.969] (==) intel(0): Backing store disabled
[ 20.969] (==) intel(0): Silken mouse enabled
[ 20.969] (II) intel(0): HW Cursor enabled
[ 20.969] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.972] (==) intel(0): DPMS enabled
[ 20.972] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 20.972] (II) intel(0): [DRI2] Setup complete
[ 20.972] (II) intel(0): [DRI2] DRI driver: i965
[ 20.972] (II) intel(0): direct rendering: DRI2 Enabled
[ 20.972] (==) intel(0): hotplug detection: "enabled"
[ 20.972] (--) RandR disabled
[ 20.984] (EE) GLX error: Can not get required symbols.
[ 20.996] (II) intel(0): switch to mode [email protected] on pipe 0 using LVDS1, position (0, 0), rotation normal
[ 21.006] (II) intel(0): Setting screen physical size to 423 x 238
[ 21.139] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.139] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.139] (II) LoadModule: "evdev"
[ 21.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.141] (II) Module evdev: vendor="X.Org Foundation"
[ 21.141] compiled for 1.14.3, module version = 2.8.2
[ 21.141] Module class: X.Org XInput Driver
[ 21.141] ABI class: X.Org XInput driver, version 19.1
[ 21.141] (II) Using input driver 'evdev' for 'Power Button'
[ 21.141] (**) Po
Maybe you are looking for
-
Dual Displays, not enough firewire ports?!
My MacPro isn't here yet...and I only have 1 cinema display right now but plan on adding a 2nd one in a few months. In my anticipation for the Mac to be dropped of by FedEx, I noticed something while reviewing the specs... My video card, the ATI Rade
-
Applet Button acting weirdly...
Hello I'm quite new at Java, and new to this forum, so don't be too hard;) I've got a problem with a awt.button in an Applet. When i click on the button it seems to send two events, and thus executing twice the code. I would like it to execute only o
-
How to specify dynamic cursorname in FETCH INTO statement
Hi there, my pl/sql block is like below: LOOP FETCH pSnCur INTO <variablevalue> EXIT WHEN pSnCur%NOTFOUND; end loop; here after INTO i want to specify variable for cursorname because my cursorname is changing dynamically. Is it possible to do thi
-
I cannot log into the itunes store. Everytime that I have tried to log in and error message appears and says it cannot perform this task...and when I try to go into the music section of the application it says its not availble in the U.S as this time
-
ALBPM:Polling of folder and create a process instance.
Hi, everyone. I am quite new to ALBPM, but I want to make everyone a question: I have a requirement where i need to poll or view a folder at particular location and in the folder search for the files. And If the files are present i need to create a p