SLG1 E-Recruitment Log
Hi,
I am trying to build a Custom report to display the error logs recorded for E recruitment alone.
After i get the log number can someone help me get the Log messages pls.
Tried diff tables & FM but no luck.
Thanks in advance.
Shawn.
Hi,
Is there any specific reason for which your are trying to create a seperate application to view this log?
In genaral, you can view this log in TCode SLG1.
Best Regards,
Venkat.
Similar Messages
-
Calling SLG1 for Application log creation
Hi All,
I have a requirement for writing logs in SLG1 transaction. I embedded the logic for creating log in a method of a class. The method is getting called in CRM inbound proxy where I would need to make mutiple calls to this log. If I use a call more than one time, I am getting only the log for the first call. The second and the rest of the calls are not throwing any message in SLG1 but shown as greyed out. Could we not call the log SLG1 more than one time in the same application?
Any ideas would be appreciated.
Thanks
AnandHi,
did you have a look at my weblog:
/people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
E-Recruiting- Log on for Paper application
Hi
Can you reply for the following scenario please?
An external candidate sends a hard copy and it was entered manually into e-recruiting system. When an invitation to apply for a specific job sent to a candidate, how the candidate gets the log-on.Hi Robin,
The role of the unregistered candidate is assigned to persons who have
not yet registered their data in the Talent Warehouse but who are
interested in taking up new employment. The unregistered candidate is
used as service user for E-Recruiting applications to give a person
access to these applications without the person having to register his
or her data beforehand in the Talent Warehouse.
Activities in SAP E-Recruiting:
The unregistered candidate performs the following activities:
-> Searching for jobs
-> Registering
-> Applying for jobs after registration
-> Requesting a new password.
An external candidate uses unregistered search and incase he finds
suitable vacancy then he applies for it.For applying to that vacancy
system ask him to update first name, last name and email address.
Now system should send a username & password to this external candidate
on his provided email address.So that he don't need to register again to
E-Recruitment application.
In our E-Recruitment system we have a user with name wf-batch which is
used to send all the recruitment related emails to candidate
automatically.Please check in your system this user has some missing
authorizations.
Kindly assign this user with authorization profile, authorization to
change the status of E-Recruiting objects (P_RCF_STAT).
please have a look in IMG-documentation mentioned above
(SAP E-Recruiting >Technical Settings >Workflow
>Workflow in E-Recruiting)
Best Regards,
Deepak... -
How to use Application log (slg0 & slg1)
Hi all,
Can u please give me some hints to utilize Application log?
Hope you will help me.
Thanq in advance,
Bye.hi John,
Check these FM's out
BAL_GLB_SEARCH_LOG
BAL_LOG_CREATE
BAL_LOG_EXC_ADD
BAL_LOG_HDR_CHANGE
BAL_LOG_HDR_READ
BAL_LOG_MSG_ADD
BAL_LOG_MSG_ADD_FREE_TEXT
BAL_LOG_MSG_CHANGE
BAL_LOG_MSG_CUMULATE
BAL_LOG_MSG_DELETE
BAL_LOG_MSG_DELETE_ALL
BAL_LOG_MSG_READ
BAL_LOG_REFRESH
SBAL_DETAIL Application Log: Display: Detail Screens
BAL_DSP_LOG_PARAMETERS Application Log: Display: Display log header parameter set
BAL_DSP_LOG_TECHNICAL_DATA Application Log: Display: Display log header technical data
SBAL_DISPLAY Application Log: Display Log
BAL_DSP_LOG_DISPLAY Application Log: Fullscreen log output
BAL_DSP_LOG_PRINT Application Log: Print log
SBAL_PROFILE Application Log: Display Profile
BAL_DSP_PROFILE_SINGLE_LOG_GET Application Log: Display profile: Standard profile (SLG1) for one log
SBAL_SERVICE Application Log: Service Functions
BAL_LOG_HDR_CHECK Application Log: Log: Header data: Check
BAL_LOG_MSG_CHECK Application Log: Log: Message: Check
SBAL_TOOLBOX Application Log: Toolbox
BAL_DB_LOGNUMBER_GET Application Log: Database: Get internal log number from number range
BAL_LOG_DELETE Application Log: Log: Delete log (from DB also at save)
BAL_LOG_EXIST Application Log: Log: Check existence (in memory)
BAL_LOG_MSG_EXIST Application Log: Log: Message: Check existence (in memory)
BAL_LOG_MSG_REPLACE Application Log: Log: Message: Replace last
BAL_STATISTICS_LOG_GET
BAL_STATISTICS_LOG_SET
Regards,
Santosh
Note: Reward Points if helpful -
Hi Friends,
We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
1) What needs to be done for internal candidates to visible during candidate search ?
2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
Kindly provide your inputs.
Regards,
ER.Hi,
In SLG1, getting the below error messages for multiple times.
"Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY
The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96
Qualification 52000001 does not exist
The incorrect HR object has the key 01NA60000029 "
"The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
Also please state how to differentiate internal and external candidate search pages.
Regards,
ER. -
Internal error while clicking on Candidate search from Recruiter role-EHP4
Hi
We are getting intrnal error while clicking on candidate search or any search option from recruiter log on after upgrading to EHP4.
after doing analysis through SLG1, we found below issues.
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH_MASK_GROUP====CM009 line 41
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00P line 676
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00R line 18
Customizing table T77RCF_SPT contains no corresponding entry for Business Object =/
The error occurred in program CL_HRRCF_SPT_CUST_TABS========CM00E line 26
We searched in SDN and got one threads with similar kind of errors. As mentioned in the thread, we have activated below items.
1. HCM_ERC_SES_1-activated
2. Customizing table T77RCF_SPT maintained with required information
3. Run report RCF_PERIODICAL_SERVICES to update table T77RCF_INT_PUB.
Still we are getting error as mentioned above. Can anybody help on this?
Regards,
PurnimaDear Purnima,
You should have a look at it in client 000. This is where you can find the table entries how they are shipped with SAP. Problem is that this is the search customizing and if we have other customizing entries in our system they don't suit to your system because I found one different entry in table V77RCF_SMG_NAVI. Please can you check out all tables and compare them with your client 000? (all tables in IMG candidate search > search profile and search templates).
Hope it helps,
Regards
Christine -
Recruiter Role 1.40: Missing Services Tray & Service Map in EP
Hi everyone
we're implementing SAP E-Recrruiting EHP 4 (SP04). We did some basic customizing in backend and installed Recruiter 1.40 and Recruiting Administrator 1.40 BPs on portal side.
After assigning portal roles to users, on first sight everything looks OK. But compared to other installation, there is no Service Map and no Services tray on the left side of recruiter role. Service map iView is also missing in portal content of the role.
The "create requisition" button in the Dashboard leads to error "iView not found".
Calling the preview for "create requisition" from portal content works as it should.
I created a service map iView manually and attached it to the recruiter role. Now I'm able to use all the functions in there w/o any problems! Created requisitions are shown in Dashboard for example.
SLG1 is (just) logging errors resulting from attempted searches in the Recruiter Dashboard. As TREX customizing isn't done, one can expect this to happen.
What are we missing? Is there some basic setup missing on portal side we forgot about?
Thanks for any advice!Hi Sanjay
Did you find a solution for your problem?
regards
Murat -
How to see the marketing planneru00B4s log?
Hi Everyone;
We have implemented the CRM_MKT_EXP_CAMP_DAT badi with the EXPORT_CAMPAIGN_DATA method for the campaign creation, and the documentation says that there is an output for the method ET_RETURN where we can save the generated messages during the execution.
Where can I see this marketing planner´s log?
Neither in the SM37 or the SLG1 are the log details.
Here is what the documentation says:-----
"Export of Campaign Data: Further Processing Using Ext.Tools
Functionality
This method is used to transport campaign data to external tools. It is called from the Marketing Planner when a communication channel is selected which
sends the relevant data to the open channel. The communication channel itself is defined in the IMG activity Define Communication Medium.
Result
If the export and any subsequent further processing of the campaign data was successful, then EV_RETURN_CODE must be set to 0. If EV_RETURN_CODE has a value other than 0, the calling function assumes an error has occurred during export, and displays a message to this effect in the application log.
If EV_RETURN_CODE is set to '1', this means that batch processing should be stopped. This value can be set if there are serious errors
For less serious errors processing continues within the batch report. The relevant error messages are noted down in the Application Log Handle. EV_RETURN_CODE is set to a value > 1.
Parameters
ET_RETURN
Category: BAPIRET2_TAB
These messages are copied to the application log for campaign execution. Only messages of category I, W(Prio 1) and E are displayed in the marketing planner's log. All other messages can be viewed in transaction SLG1.
Thanks.
Edited by: Georgina Mastache Benitez on Jun 2, 2011 6:28 PMHello,
Please follow instruction in note 672599 to resolve your issue.
thanks
Willie -
Web Dynpro ABAP in SAP E-Recruiting
Hi,
We just imported SP8 for our SAP E-Recruiting 6.0. SP8 offers Web Dynpro ABAP as candidate UI. One question we have is how WD pages incorporated for recruiters who still use BSP pages. For example, when a recruiter logs into E-Recruiting and finds a specific candidate, he/she can click on "Candidate Profile" to get to that candidate's pages. In BSP technology, recruiter actually uses exactly the same pages that candidate uses for Work Experience, Education, etc.. With candidate UI using WD technology, does recruiter use the same WD pages when displaying candidate profile information? I have been searching all the possible places, such as IMG, SICF, in order find a spot so that I can set the switch on, but so far unsuccessful.
Any help is greatly appreciated.
LiHi Li ,
At best of my understanding in WD ABAP , its possible to make one WebDynpro page serving same purpose ( showing profile deatils ) visible for manty( Candidate , as well as Recruiter ) ....
I would like to know what exactly you want from web Dynpro ..then I will be in better position to tell you.
FYI ...
1) Web Dynpro ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Wait not just that SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
The specified item was not found.
Cheers
Parry -
Back ground batch input processing error log handling
Dear Friends,
Currently im am scheduling job for batch processing of goods receipt through bapi, now after the succesfull run of this program im appending all the success and error logs in one internal table and sending this table to spool for future reference.
Is there any other way to handle the error logs??
bcoz in the method im using every time user has to run transaction sp01 to access that spool request to check the error logs.
Kindly suggest ....
Regards,
Sunny VBest way will be creating Application Logs of the reports log.This will be forever in the system unless you delete it.
Few one time settings are required. After that you can use tcodes
SLG1 (Analyze application log) and
SLG2 (Application Log: Delete expired logs).
For more info take the help from below link:
[Create Application Log|http://help.sap.com/saphelp_nw04/Helpdata/EN/2a/fa0216493111d182b70000e829fbfe/frameset.htm]
Let me know if you find any difficulty in doing this. -
Displaying error messages from application log
Hi,
I am using the function module RV_DELIVERY_CREATE for creating delivery in my program. If the sy-subrc is not zero i.e if delivery is not created, i have to display error messages collected inside the application.How can i do this ?
The object nd subobject are existing in SLG0 but when i
tried to see the object and subobject in SLG1 transaction , no logs were found.
Do we need to activate the object and sunobject somewhere before logging can take place??
I am using the following code in my program to display the logs but it is displaying no logs found:
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
EXPORTING
object = 'ZCH_SCL'
subobject = 'DL'
LOG_HANDLE = ' '
NO_LOG = ' '
EXCEPTIONS
OBJECT_NOT_FOUND = 1
SUBOBJECT_NOT_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'APPL_LOG_INIT'
EXPORTING
OBJECT = 'ZCH_SCL'
SUBOBJECT = 'DL'
LOG_HANDLE = ' '
EXCEPTIONS
OBJECT_NOT_FOUND = 1
SUBOBJECT_NOT_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM z_call_rv_delivery_create. " to call fm rv_delivery_create
IF sy-subrc ne 0.
CALL FUNCTION 'APPL_LOG_DISPLAY_INTERN'
EXPORTING
object = 'ZCH_SCL'
subobject = 'DL'
title_list_screen = 'Error Logs'
COLUMN_SELECTION = '11112221122 '
COLUMN_SELECTION_MSG_JUMP = '1'
EXTERNAL_NUMBER_DISPLAY_LENGTH = 20
I_S_DISPLAY_PROFILE =
IMPORTING
NUMBER_OF_PROTOCOLS =
EXCEPTIONS
OBJECT_NOT_FOUND = 1
SUBOBJECT_NOT_FOUND = 2
OTHERS = 3
thanks,
vartikaHi Vartika,
you need to save that log after creating and appending to it.
here is a code to save that log.
If log created, save to database
if e_bal_hndl is not initial.
refresh: bal_hndl.
append e_bal_hndl to bal_hndl.
call function 'BAL_DB_SAVE'
exporting
i_client = sy-mandt
i_in_update_task = 'X'
i_t_log_handle = bal_hndl
importing
e_new_lognumbers = log_no
exceptions
log_not_found = 1
save_not_allowed = 2
numbering_error = 3
others = 4.
u have to write this code after appending info to Log.
hope this will help.
regards,
vikas -
What is an appliaction Log??
I have read a bit about logs. And i feel logs are nothing but messages of different types stored in the DB with a unique id.
Can anyone tell me how the objects and the subobjects required for log header are created??
And how will i know as to the log I am creating is for which application. Please can anyone answer it??hi,
The application log is a tool that collects messages, exceptions, and errors. This information is organized and displayed in a log.
You can display logs and save them in or delete them from the database.
You can get the following information:
· Basic header information (log type, created by/on, etc.)
· Message long text
· Detail information
· Technical information
Call transaction SLG1 (Analyze application log) and SLG2 (Application Log: Delete expired logs).
for futher help
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d3/1fa03940fab918e10000000a114084/frameset.htm
Regards,
Sourabh -
Eror records written to application log
Hi all,
while i was loading the data from flat file , it is showing any error "Eror records written to application log". and also Internal error [/SAPAPO/OM_TS_TGRID_CREATE ] -- Errors in source system " .
pls help me..
what is a causeHi Leela,
[/SAPAPO/OM_TS_TGRID_CREATE ] error is due to the inconsistency with the Data source in Source system, Chk that in your Source System,
<b>Eror records written to application log</b> : Check the format of the columns in the file , specifically Dates .
And the log could be seen throguh transaction code SLG1.Analyse the log and find out the cause of issue or more detailed error message.
Hope that helps.
YJ -
Hi all,
Iam getting error like Requested Paremeter does not exist in SLG1 while creating log.
Please give me some ideas to solve this issue..
Thanks in advance.......How are you creating the error log. If you are using the BAL_LOG_CREATE FM, make sure you are passing atleast the following parameters
extnumber
aluser
alprog
object
subobject
altdate_del
If not use teh above FM, and use the BAL_LOG_MSG_ADD FM to add the message, and BAL_DB_SAVE to save the message.
Albert -
E-Recruiting: TREX--Search not working from TRM
Dear experts,
We have a strange problem in our implementation.We have configured TREX 7.0 with eRecruiting 603.The TREX is without SES.
If i go to succession planning & do the search against a succession plan(requistion) by clicking cnadidate search, i get search results & i can assign them to the plan.
If i go to Talent Relationship Management & try to do the search,it gives me an error"An internal error occured.Please try again later".
If i go to SLG1 & check the logs, i can see the following:
"Proficiency scale could not be read
Message no. HRRCF0001127
Diagnosis
The proficiency scale could not be created. Possible reasons:
Missing Customizing
Missing authorization'
"The error occurred in program CL_HRRCF_T77RCF_SCALES========CM002 line 42
Message no. HRRCF0001010
Diagnosis
The system detects a technical inconsistency.
System Response
The operation will be terminated.
Termination takes place in:
Main program: CL_HRRCF_T77RCF_SCALES========CP
Subroutine: CL_HRRCF_T77RCF_SCALES========CM002
Line in source code: 42
Can anyone please help us out with this?
Thanks,
SowmyaHello Sowmya,
I feel that the custominzing in the table T77RCF_SCALES aer not perfect.
there may be missing entries here For example :
- No entry in Customizing table T77RCF_SCALES for scale type [A]
- No entry in Customizing table T77RCF_SCALES for scale type [C]
- No entry in Customizing table T77RCF_SCALES for scale type [W]
- Customizing table T77RCF_SM_ASME contains no corresponding entry for
SMASK_ID =0002
Please make the entries accordingly..
Best Regards,
Deepak...
Maybe you are looking for
-
Spry Menu Vertical - Border thickness problem in IE 7
Hello, No. I'm not using the last 1.6.1 file, because I have change the css vertical menu to fit my design style. Errors that I get: They are all with IE 7 versions. In Firefox, everything is great. 1) A weird refresh when I click on the submenu link
-
HT201272 fring credit i purchased but cannot get credit Your receipt No.119043073492
yesterday i purchased in Singapore dollar $14.98 Your receipt No.1190430734 still i cannot get the credit pls help to update my credit Billed To: Naren Naren Dyna-mac Eng Pte ltd Singapore SGP Order ID: MGYM6TQ7F5 Receipt Date: 05/12/12 Ord
-
Weblogic- Fusion Middleware 11g domain JPS security issue.
Hello All, I'm not very familar with the extensive Security "JPS" managembnt inside weblogic including fusion middleware and the domain security policy. I just wanted to remove the below line from my "Reports Engine" configuration and now I'm stuck w
-
This is not necessarily a question but more of a comment. I do use Final Cut Pro 7 but am starting to use Final Cut Pro X and find I really like it. The only thing that is hard is that all my HD and SD cameras are tape based. Importing inFCP7 Is easy
-
Change Canvas size on one dimension
I want to change the canvas size to account for a 2 in. leader. E.G. an 8.5 x 11 image to 8.5 x 13 in. But the 2 ins want to be at the lead end of the image, that which enters the printer first. Thanks in advance for your help.