Sli and k8n diamond plus

when i install a second graphics card for sli on k8n diamond should enable or do anything in the bios?
or is it just plug and play?
im using bios 1.0
thanks in advance for any help...

s_quire,
Just make sure you use the latest nVidia nForce & ForceWare Drivers
Take Care,
Richard

Similar Messages

MOVED: sli and k8n diamond plus

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=97611.0

s_quire,
Just make sure you use the latest nVidia nForce & ForceWare Drivers
Take Care,
Richard

K8N Diamond SLI and K8N Diamond SLI PLUS

What is the main difference besides, Sound Card and HeatPipe Cooler
Thanks...Shutdown Guide

garfildd,
You also get two PCI-E Slots that will both run at 16X at the same time, even though no Vid Cards out there can use the extra Bandwidth.
Take Care,
Richard

K8N Diamond Plus, SLI and Creative X-Fi cards, anyone running similar?

Hi there!
I've got an ASUS A8N32-SLI board and my X-Fi card does not work with it, nor does it for many other people with similar setups.
See here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=31426
and here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26289
I get crackling and popping noises when running most games, e.g. BF2, Fear, FarCry. When my 2x7800GTX's are in SLI mode it crackles loads, e.g. start far cry, click options, and listen. When i disable SLI mode it crackles less, but it still crackles. Many others encounter similar issues with their systems that are not identical but the symptoms are similar - high load = crackling/popping.
My question is:
Is anyone here sucessfully running any X-Fi card (music, fatality, elite pro, etc) with 2x video cards and NO crackling/popping in BF2, FEAR and FarCry?
I've already had a replacement X-Fi card from creative which their tech guy said "should" fix it, lol, I'm wondering wether to replace my A8N32-SLI with an K8N Diamond Plus to fix the problem. Besides, the MSI board has better PCI slot location and works with nTune too unlike the ASUS board.

What's going on guys.
I hate to see peep's having soooo many prob's and it sucks major BALLZ. The reason why I'm reposting is that I encountered a new issue. Not with my rig, but a friend's.
We pretty much have the same setup. Differences are he's using 2GB of Corsair DDR400 (which is picking up as DDR333 as well), different branded video cards (I'm running two EVGA 7800GT's in SLi, he's running two BFG 7800GT's in SLi), XFi Platinum (me, Fatality Edition) and he's got a dedicated ITE RAID PCI card for his RAID from his previous rig. Configured his BIOS pretty much the same way I have it running (he wanted to Overclock his AMD x2 4400+ to 2.6 GHz), but when it came to installing Windows we kept getting BSOD's during installation. Looked over things numerous times and it didn't make sense. We resetted the BIOS to default settings and Windows went through without a hitch. We tried OC'ing it one more time and Windows was fine. But, when he installed and ran Quake 4, either Windows or the game would just lock up. He booted back into the BIOS and put the CPU back at stock frequency of 2.2 GHz. Game ran flawlessly afterwards. That points at the processor. The only differences were we both have different stock fans and his CPU was manufactured in July '05. Mine in Sept '05. His rig also reports the infamous "Phantom" PCI modem as well.
Quake 4 is the only game he's got installed so far, but he reports everything is set to their highest qualities, including resolution. He said it runs great with no anomalies. He's going to install Dawn of War and Winter Assault later I know.
Me? I haven't run into any issues with any games either, including F.E.A.R. as Hydrasworld asked. Both of our sound cards are in the Communication PCI Slot of the motherboard. My take on the OC issue is since we're using different proc's from different wafers, maybe my chip had revisions in September that the July proc my friend has didn't. Also, his heatsink has one less copper pipe I noticed. I'll still drop by for help. Good luck to you all and the only other thing I can add is try using the latest drivers for each piece of hardware you've got.
LPB
P.S. If you can and you purchased a retail version of the processor, on one of the sides of the carton insert for the processor, a date should be printed. Maybe that can explain some issues. Once more, my proc was manufactured September 15th, 2005.

K8n diamond plus sli link card

bought a open box k8n diamond plus from newegg and it didn't come with a sli link card
to go between the 2 video cards.
where can I buy one?
thanks

newegg was of no help.
I got ahold of msi and they're sending me one.
thanks.
it was a open box board that turned out to be just a board LOL.
i'm still looking for the full install of the creative software.
the drivers load but none of the base creative software is in the
msi downloads.
so digicell can't fine the creative programs.
i upgraded the bios to 1.20 and am waiting for the sli bridge
so i can put the other 7900gt ko 512meg card in.
runs good with just one, it should run even better when both are in.
thanks again.

Anoying issue with K8N Diamond PLUS and overclocking.

I just got the motherboard wehn i overclock and restart the PC either from windows or BIOS etc. The PC will not boot and have to turn it off then turn back on. Apart from this annoying issue it's a great board better theen my A8N SLi Premium mostly due to the extra CPU voltage yay :D Is anyone else getting this issue?
System spcs are
AMD Athlon64 X2 4400+ @ 2766MHz (1.6v)
2GB Crucial Tracer PC4000
2x DELL Slient Geforce 7800GTX 256MB card
Espison 700w SLi cert PSU with EPS CPU voltage connected
Koolance EXOS AI Watercooling
MSi K8N Diamond PLUS
2x 150GB Raptor X in RAID-0
Coolermaser RC-830 w/ 4x 140mm + 3x 120mm fans

thats funny mine did that when i first got it , but when i received my new memory and video card everything was normal...so i dont remember if it was the memory or the VC..i just totally forgot about it..funny though i thought it was only me

K8N Diamond Plus and Opteron 175

Anyone running a K8N Diamond Plus and an Opteron 175 ok?
Any problems?
Any tips?

Quote from: skippy9146 on 20-January-06, 08:51:51
They should run fine... as a Diamond Plus comes with a Dual Core compatable BIOS.
You'll have to post back with some news when you get it together.... I have a 165 that needs a new home.
thanks for the reply, i kinda figured it might support it, as the M8N Diamond does (accordingto the cpu support list) but MSI's site doesn't seem to have much info about the K8N Diamond plus, not even a single bios upgrade or anything.
I have an ASUS A8N32-SLI but i have 3 issues with it:
1) can't install vista 5270 - common problem, not just me
2) poor pci slot location when using 2 pci-express dual width gfx cards
3) only available pci slot shares an IRQ with 2nd gfx card, bad for sound cards
I was going to order one this weekend but i might just not bother now as someone else posted the xfi cards don't work with them (popping/crackling, just like i have now) and that was my main motivation for getting rid of my asus board as my xfi card doesn't work either.

WANTED! - List of IRQs and Hardware for K8N Diamond Plus?

Hi there!
I'm trying to find out what hardware shares IRQs on the MSI K8N Diamond Plus motherboard.
I want to use an X-Fi card in the bottom (orange) PCI slot, and 2x 7800GTX cards in the PCI-Express x16 slots and would like to know if any of the devices will share IRQ's with onboard hardware.
You can list your IRQs by running msinfo32 - start, run, msinfo32 [enter], then click expand the following item in the tree System Summary -> Hardware Resources -> IRQs.
You can export the IRQ's in msinfo32, make sure the IRQ list is displayed, then click file/export, then save to a text file. Open the text file with notepad and copy and paste your results to your reply below.
I'm trying to find out whether an MSI K8N Diamond Plus will have less conflicts or less important conflicts than a ASUS A8N32-SLI.

There are 4 PCI IRQs called INTA#, INTB#, INTC# and INTD#.
These INTx# are interrupts and are level sensitive, this means that the electrical singnaling allows for them to be shared among all PCI cards. All single device/ function PCI cards that use only 1 interrupt must use INTA# as this is one of the rules in the PCI spec. If there are additional devices within a chip or on-board a card then these additional devices can use INTB#~INTD#, since there are very few multifubtion PCI boards (none that I know of right off my head) this means that most or all devices will use INTA#.
With that said; you do not really need to worry about hard wired INTA#~INTD# at board level.
If you are using Win XP I would not even worry about IRQs as Windows uses "Virtual IRQ routing" which simply means Windows XP will assing IRQ to each device and XP handles this extremly well.

K8N Diamond Plus and MBM5

Anybody got MotherBoard Monitor 5 or Speedfan, working with the K8N Diamond Plus
I need to configure my LCD on my keyboard and can take values of temperatuer only from these two programs.
The programs to create custom screens on the LCD is the LCD studio.
If anybody got it to work please enlight me

Neither of those progs have support for the Diamond Plus...as stated, Everest Ultimate does though.
Quote from: kingdomwinds on 30-April-06, 04:15:40
BTW this is offtopic but can you get read write queue bypass to 16x? I set mine to 16x but it shows up as 8x in windows. Same with the idle cycle limit. I set it to 256 but i shows up as 16. Really retarded mobo IMO
I have both set at 16x and 256 respectively without problem

Water cooling and the K8N Diamond Plus...

I have a water cooled DFI mobo atm and I want to change it to the K8N Diamond Plus and I noticed that the board has a heat pipe on the northchip and on some other component. My question is this; I want to put a water block on the northchip but I don't know if I can. Can I safely remove the heat pipe setup to put a water block on the north chip and if I do what about the other component that the heatpipe was covering? I hope I wasn't to confusing in the explanation.

Hello !!
You will need two Waterblocks, one for the north- second one for the southbridge.
There should be no Problems mounting the blocks if the mounting holes fit the mainboard.
You can easily remove the Heatpipe. You have to squeeze those nipples togehter tha are on the backside of the board. You can do it manually but you can also use a cylindric tool to squeeze them together. I cut a plastic pen i the half, and pushed it on those mounting latches carefully.
___|\ half pen
latch___ <----
|/ ___________
After this procedure the Heatpipe is only held from the thermal grease on the chipset.
Greetz

I need help DDR voltage and latencies (K8N Diamond Plus)

I noticed my DDR voltage was incorrect in the bios and I don't know what "Auto" is doing with my timings. I have 2GB of Corsair TWINX2048-3200C2 DDR400 Memory installed on DIMM1 and DIMM2 of my K8N Diamond Plus board.
So far I've made the following changes (as my RAM's specs indicate) in the BIOS but I'm new to this (first build).
DDR Voltage 2.75V
CAS 2.0
tRCD 3
tRP 3
tRAS 6
I left everything else at it's default setting. Are there any other changes I should make?

Quote from: memeticvirus on 14-May-06, 15:41:10
I'm having an issue with the 1.10 BIOS that is preventing me from manualy setting the timings...The problem I'm having right now is deciding what BIOS to install and where to download it. Perhaps you could help me with that?
With pleasure! I had the same problem with the v1.10 BIOS, as did another member here. I flashed BACK to the v1.0 BIOS (make sure to use the command line switched (just run the batch file)) and was able to set timings, and then I flashed directly to the 3.0A BIOS and was able to adjust timings still. See my old thread here.
For my success (I don't know if any or all of these influenced it, but I'm just happy it works) in flashing I did the following:
Download the 1.0 (original) and 3.0A (latest "official") BIOS images from MSI's support site.
Downloaded the DrDos BIOS flash bootable ISO CD image from bootdisk.com
Used my ISO software to add the BIOS image files onto the ISO image.
Burned the ISO to CD.
Booted from the CD
Flashed to 1.0
Cut Power (flipped PSU switch in back), held down the CMOS reset switch button on the mobo and the power button for 45 seconds.
Powered up, set "Optimized Defaults" and set memory voltage to 2.75v and rebooted.
Set all "normal" BIOS parameters (boot devices, et al).
Windows (x64) loaded with no issues, Everest reported timings appropriately
Did the same procedure for the 3.0A BIOS, with similar success.
You can see my post or click on the link in my sig for detailed memory reports.
Quote from: RogerP on 15-May-06, 03:04:55
Are you running just one set of TWINX2048-3200C2's?
Just one pair. I fiddled with the CR and the only result was with the single known good DIMM my latency got slightly slower (like a 5ns drop), but still no love with 2 DIMMS. I think it is just dead. But this is not my story (at least not in this thread)...this is memticvirus's story.

MSI K8N Diamond Plus - Guide to my first week

OK, not a newb here, but been around the block quite a bit. MSI K8N Diamond Plus is my 5th A64 mobo (ECS K8M800, my daily undestroyed computer, K8T800, my 12 year olds gamer, Asus A8V Deluxe, first 939 system, Abit AN8 SLI, first SLI gamer, and now the MSI Diamond Plus). Had the KDP (K8N Diamond Plus) for more than a week now, and here's what I've learned.
This is state of the art again, and we have no one to blame but ourselves for the pain this causes us when we upgrade like lunatics
And as usual, the drivers and BIOS are al Dente (i.e. not cooked enought yet, a little raw)
MSI is also oddly silent on this system, which is wierd, as they are a large company, and specifically cater to enthusiasts. But their BIOS guys are MIA. Hopefully this will not be forever. Asus, ABIT, DFI, Epox are always fast with fixes
The board is a nice design, with everything basically accessible, as much as any other board. Lots of purposeful components, not too many dumb frills. No tooty fruity colors, but rather practical parts.
The new 2 piece NForce chipset is fine, and the MSI guys gave us a decent, but funky cooler. It gets a little warm to the touch when you pound on it with Prime95, or Quake4, but other than that it is fine
The manual has a zillion typos, and fortunately for us in this forum, we have shared what we've learned. The translation from Chinese to English leaves quite a bit to be desired, and hopefully, MSI will learn from Asus and Abit and get a better translation service. In 2006 this is just plain stupid, especially with a $225 board
As usual, the mobo supplied tweaker utilities are just aweful. They look like a hallucination from a Hunter S Thompson book, and they work about as well. Core center is a sad state of affairs, and the rest of them just burrow their way into your otherwise stable system and cause it to have poor behavior. And therefore as usual, the BIOS is the best way, if slowest, to tweak this bundle of parts
Which brings us to the BIOS. IMHO, the worst one I've seen on a high end board. ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation )
There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are. Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test. But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
The board is clearly sensitive, which is a result of it being high strung. This is no different than any "first out" product I've ever bought. Most take 2 or 3 turns of the crank to get totally stable and forgiving. This one hated my OCZ platinum EL 2Gb kit memory, and it brought out the worst in one of the SLI based EVGA 7800 GT COs. These components worked in the Abit AN8 SLI (although not always great), but the MSI has ZERO tolerance for even the slightest pertubation from the memory. It was BSOD city until I removed both of these components by process of elimination that took probably 100 hours
Once I removed the bad components, and replaced the memory with Geil Ultra X 2x512 2-2-2-5, it worked great, ran Prime95 for 10 hours with no errors, and seems reasonably stable. I've RMA-d the bad 7800GT CO back to EVGA, and will report back on how SLI behaves when I get the new one (cross shipped of course, I haveno patience )
I also now need to replace the 2Gb RAM kit with something that the board will tolerate. I may RMA the 2Gb kit back to OCZ and try another one, but I dunno. I love OCZ but I have a bad feeling about this, even though they have great!!! support. I may try OCZ PC4000 or the RAM that Roger successfully used.
I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster. I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53. I had to rebot to see what was going on. The Thermalright XP-90 kept the proc from melting down through the earth
Finally, I hope this board attracts more people, and therefore more tweakers that can figure out all these gadgets and settings. Everyone flocked to the Asus X16 SLI product, which is too bad, as this one needs lots o' folks to hack it up for us to figure out what is going on.
The on board Creative audio sounds lousy to my ears, and I will replace it with an Audigy 2ZS gamer that I had in the Abit. It just sounds better, but hopefully the drivers will not trash my newly stable system. Creative scares me, they scare me alot.
I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory. So far, so stable, no smoke coming out yet
I hope this info is somewhat valuable to someone on this board. I will post details of all changes that I make, as others are doing, so we can at least take care of ourselves with this thing.

Quote from: nanohead on 15-February-06, 01:17:10
Which brings us to the BIOS. IMHO, the worst one I've seen on a high end board. ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation )
There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are. Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test. But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
first of all, i do think that all the settings in the BIOS have an explanation in the manual, even if it's a basic one. if that explanation doesn't tell you everything in detail, is because if you do need a detailed explanation of the settings, you probably shouldn't be messing around with those settings.
Quote from: nanohead on 15-February-06, 01:17:10
I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster. I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53. I had to rebot to see what was going on. The Thermalright XP-90 kept the proc from melting down through the earth.
wanna tell me how did you get 1.95V on that mobo?
Quote from: nanohead on 15-February-06, 01:17:10
I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory. So far, so stable, no smoke coming out yet
a 0.5V bump? again, you must be joking. maybe 0.05V.

Someone tell me it aint so: K8N Diamond Plus nForce4

simple really work were buying a job lot of computer bits and pieces so i thought might as well bung a few things on for myself and take advantage of the discount, so a new mobo, memory, and graphics card ive got more than enough spares hdd, fans, dvd/cd drives
took all the stuff home tonight thought i would stick it altogether leave it installing with baby sitter and go pub. So build it and then look at it strangly thinking im missing something then it hits powersupply, bugger how could i forget the powersupply have no fear i'll just take it out of my other rig. so out it comes and i start connecting it all up then i come accross the 12v cpu connecter and i begin to search for a 4 pin connection on my shiny new mobo and what do i find a bloody 8pin one.
The mobo in question is MSI K8N Diamond Plus, nForce4 SLI X16, Socket-939
The power supply in question is found in my sig
My questions is am I screwed, will i have to wait till monday to order a new power supply then wait till it gets delivered or can i just ignore the little factor of 4pins into 8 doesnt fit slap it in switch on and not have the computer start blowing smoke at me. im suspecting a long wait till monday and a longer wait till delivery but stranger things have happened in the computer world

Quote from: thorpe on 17-June-06, 18:13:01
i'll be honest i was thinking your all bonkers
that's not a nice thing to say
Quote from: thorpe on 17-June-06, 18:13:01
got the wife to press the power on button
roflmao this is the best part. i think we should all make our wifes/girlfriends (or the male equivalents) to push the button after a heavy OC or after messing around with the system. that way you can blame it on them if something happens

New K8N diamond plus questions please help.

Hi all well i am new to this msi site and am thinking of buying the new MSI K8N Diamond plus motherboard, the problem i have is that i have been a fan of ASUS and have had there last 3 SLI motherboards of which i have not been happy with.
Well i am totaly into overclocking and have an Opteron 165, balistix ram, 600w Enermax PSU, 2x Gainward 6800gt's,
what i am looking for is a motherboard that does what i says it will do, yes the asus a8n32 was a great motherboard but has a limitation on the voltage if useing the new E4-E6 stepping cores of which would only give a max voltage of 1.58v of which the asus spec said 1.76v.
What i am asking you chaps is is this a great motherboard, can you play with all the coms settings without any limitation, or do you think that the DFI motherboard is better.
If you can let me have some info on this motherboard that would be great, as i can not seam to get any reply from MSI about some information.
what i am looking for is what is the max CPU voltage and is there any limitation on it for some chips.
what is the max voltage for the ram
what is the max voltage for the chipset.
any help on this would be great.

Quote from: Stick on 23-February-06, 17:46:08
there is no mobo that alows 4V for the memory. i think the DFI goes up to 3.4V and you can use a DDR Booster to get to 3.8V. the only mobo that is capable to pass 3.3V is the DFI since you can have the choice to select from which rail the memory will be powered (the 3.3V or the 5V). you don't have that option in any other mobo.
Hi thanks for the mail but i have just copied this from msi about this motherboard, see below.
1.Adjust CPU FSB Frequency:
You can adjust the desired "CPU FSB Frequency" by using "+,-" key. The default value of AMD Athlon™64 is 200MHz. The maximum value is 450MHz.
2.AMD Overclocking Configuration (CPU Ratio):
If the CPU is Athlon™64 FX series, the ratio range is from 4 to 25.
If the CPU is Athlon™64 series, the ratio should be set according to its model number. For example, the ratio range of 3000+ is from 4 to 9, and the 3200+ is from 4 to 10.
3.Adjust Extra CPU Voltage:
This is for adjusting CPU voltage while overclocking. Following the CPU default value, the maximum is 1.8V. The interval is 0.05V.
4.Adjust DDR Memory frequency:
The Memclock is the major part which has four different frequencies to match many kinds overclocking memory modules. The memory frequency settings includes DRAM/FSB=1/2, 2/3, 5/6, 1/1.
5.DDR Memory Voltage:
This is for adjusting memory voltage while overclocking. K8N Diamond Plus has a special design.We use jump to distinguish two level arrangement of voltage. In this way it can get maximum 4.1V for overclocking modules. As you can see the below pictures, the left one is the standard mode when jump hat is located at the top postion. The default value is 2.5V, and the maximum is 3.2V. The interval is 0.05V. As the right one, it is overclocking mode when jump hat is located at the under postion. The default value is 3.2V, and the maximum is 4.1V. The interval is 0.05V.
What i am asking is there any limitation on the cpu voltage like the asus a8n32 as this had a max voltage of 1.58v due to it having a limit put on it by recomendation of amd.

Aftermarket HSF options for K8N Diamond Plus

Just built a new rig with the K8N Diamond Plus and am very pleased with the board -- worked great from first power up and with a little BIOS tweaking I have no trouble getting a 50% overclock from my dual core Opteron 170. No headaches at all, unlike my previous experiences with Abit boards.
The AMD heatsink fan unit (with heatpipes) provided with the 170 is not bad at all, but I'd like to replace it with a more capable unit, along the lines of the Zalman 9500, Scythe Ninja, Tuniq Tower 120, Thermalright XP-120, etc. The tall heatsink of the Nvidia NB is close to the CPU socket and quite high, so I'm not sure if any of these will fit. Anyone using one of these or similar heatsinks ? Please let me know if they fit, or did not fit.
Since I could find any of the 7800GTX 512MB boards I wanted, I'm using a single MSI X1900XT card right now but plan to go SLI in the future with 7900GTX cards driving the 30" Dell monitor. The ATI video board and nVidia mainboard surprisingly get along great, with no crashes so far and 3DMark06 scores above 6000 -- the X1900XT is an impressive piece, and much faster than the X800XT-PE I had in my previous computer. But the fan can be extremely loud and the Catalyst Control Center sucks. Unfortunately the old ATI control panel is no longer offered...

TimeReaper,
The problems your are talking about are not uncommon with this MS-7220. The BIOS Clear Circuit physically has problems and that is not something they are going fix with a BIOS upgrade.
The BIOS Clear Circuit actually trashing the values stored in the CMOS by not doing a complete clearing of the CMOS is causing the problem. What leaves trash for parameters, for the BIOS to use when rebooting.
Let give you an example that fits your case. You can set the BIOS to turn the system on at any give time and date. So, if the trash in CMOS is in those parameters storage location. Therefore, whatever trash value gets stored in the locations, as a dated and time, will turn the computer on at that time. So, you could of had the computer come on in the meddle of the night two week later. Now, think of all the functions the BIOS have and how many weird things people are having and do not know why. There is one guy that is a regular on the Forum how has been fighting a problem I know is caused by trash in the BIOS CMOS, but Strick and I have ask him to do a good CMOS clearing and he just will not do it. I even wrote out in great deal the over night CMOS clear procedure I use. It is a pain in the ass, but some times, I have too use it. I just had to use it, upgraded V3.09 using short CMOS Clear and had no problem. Used the short procedure again when upgrading to V3.0A and everything when to hell, had to finally use the long overnight procedure and reinstall Windows to get computer to run right again.
NoBS, when your computer goes BOOO during the night just plain it o MSI.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

Sli and k8n diamond plus

Similar Messages

Maybe you are looking for