SLI NOT WORKING
Having issues getting my motherboard to work correctly with SLI not sure how to enable it to all be read properly.
Motherboard- MSI Z77A-GD65
GPUS- MSI GeForce GTX660ti Power Edition
If anyone could just point me in the direction of which setting to choose in bios that would be greatly appreciated.
I think its also worth noting that windows is only reading one of the cards at a time.
I have already tested the cards every which way including trying them individually in a different machine.
Quote from: Nutfriend on 17-September-12, 09:35:36
Flash to the latest version A6D: [follow intsrunctions from the link]
https://forum-en.msi.com/index.php?topic=158257.msg1183124#msg1183124
Looks to be BIOS issue:
Code: [Select]
03.Fix some PCIE card can't detect issue.
then retest.
Similar Messages
-
Y510P SLI not working after update to Win 8.1
Hi, my SLI is not working after update to win 8.1. (i just factory reset my computer recently). i know that i have to update my vBIOS in order for my 2nd GPU to work in win 8.1. I have updated it and reboot my computer, but nothing happens and my 2nd GPU is still not working. I have checked in device manager that my 2nd gpu is working properly. I have not update my drivers to the latest since the factory reset. Please help me out
Hi Thanks for the help, i appreciate it. But, i have already updated my BiOS for the SLI before i posted this, the actual problem is that the 2nd GPU still does not work even after the update
-
P6n sli not working with E5200
i have p6n sli and i want use E5200 but not boot up mainboard.Msi say mainboard support 45nm core2duo but mainboards not working with 45nm core2duo.Anybody run 45nm core2duo with p6n sli ?
Don't make such crossflashing experiments.
Flash back to your correct BIOS for your mainboard
List all system specification, read >>Posting Guide<< -
Well, I did a lot of search on here and found similar problems, but, those answers did not help. Here is the lengthy story:
I ordered MSI K9N2 Platinum with AMD 940 BE, 8GB OCZ Reaper, and used my current videos cards ( EVGA 9500GT 512 DDR3 ) as well as my 700 watt Thermaltake PSU. I am utilizing XP64.
I assembled PC with just 1 stick of RAM in place. Installed OS, tried to install the MoBo drivers off included CD rom, but, they do not include the XP64 drivers..... no biggie, I found a post by Boss with a link to the correct nVidia drivers. Worked!!! You go Boss!!
The VGA onboard was what I used until I got all updated BIOS 3.3 ,drivers and Service Packs installed.
I then went to install both cards at the same time ( with SLI bridge of course ). Screen was blank. It registered that there was something since the screen did not go into hibernate state...but, no visual.
I removed the cards and went back to onboard, got visual again.
I reinstalled both cards....nothing. Removed the secondary card....nothing. Put one card in secondary slot removed the other from primary, got visual. Left card in secondary, updated drivers for card.
Reinstalled both cards, nothing. Go into BIOS with cards in secondary, verified onboard VGA was disabled as well as Hybrid SLI.
Wiped CMOS several times while I removed the power cord and verified the Slot was clean. Nothing changes.
I have completed 3 fresh installs just to make sure I did not goof something up.
Removed board from case. No difference. The fan on the GPU in the primary turns on and spins just as fast as the secondary, so it seems to be getting ample power.
8-port plug is plugged into top of MoBo as well as the 4-pin.
Called tech support.......guy seemed a little unsure of issue I think.
Any suggestions? Havent resorted to a hammer yet, but, if it works
If onboard, and 2nd slot works with any card, it looks logical that there is a problem with 1st slot.
Don't think it is that, but you could have a go with less memory.
"Do not use the light-blue slot when only one PCI Express x16 card is installed."
http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&prod_no=1443# -
MSI X58 Pro SLI not working - solved
Just wanted to post my experience of the last couple days here so that hopefully google and the other spiders will grab it in case other people have the same problem I was having.
I have an MSI X58 Pro, and was running a single GeForce 8800GT for a long time. I grabbed a second one on ebay thinking an SLI setup it would be a snap to install. I came to find out that the bios version on my motherboard supported Cross Fire out of the box, but no SLI support. When I had the MSI website do an automatic scan, it came back that the most up to date bios version for my board was 7.xx, but the version that supported SLI was 8.xx. I was close to throwing in the towel, but found some threads here pointing to the download and use of the MSIHQ USB Bootable Tool and BIOS helper. I manually downloaded the v 8.E bios update, had the tool create a bootable usb thumb drive, updated the bios without any drama and bingo, SLI is now working on my machine.
Big props and my thanks to the guys who made this tool, I owe you a cold one!Thank you very much for the glowing post. Yes, we are very proud of the Forum Flasher and have been trying to get MSI to officially adopt it as well.
-
For some reason GPUz is stating SLI is disabled even though the Nvidia control panel states it is enabled.
My motherboard is a 990XA-GD55 with an AMD 8350, 2x Asus GTX 660Ti OC, Corsair CX750m, Gskill 4x4gb ram.
http://www.msi.com/product/mb/990XAGD55.html
I know that this motherboard only has two PCIe 2.0 1x16 slots, though one of them only runs in x8 so they are both being downgraded to x8 (at least that is what I think is happening).
1st PCIe x16 slot is running in x8 mode @ 2.0
2nd PCIe x16 slot is running in x8 mode @1.1
Does this seem off to anyone? Why does GPUz state SLI is disabled?
Is there any way to have my main x16 slot running in x16 while the other is x8? If not, is there a reason the secondary x16 slot that is made to run in x8 only running @ PCIe 1.1 instead of 2.0 and how can I fix this?
Edit: Hmm, for some reason it is varying which x8 it is running at. Sometimes it is 2.0/1.1, 1.1/2.0, or 2.0/2.0 yet I have changed nothing. Let me know if you can explain why this is.with that board there are only 16 PCI-E lanes total for the 2 x16 slots as the second is tied into the Primary x16 physical slot! when you have 2 cards they have to share the 16 available lanes between them so you get 2 x8 lane slots (the upper is wired for x16 and the lower is wired for x8 but they share the same lanes so the 16 gets spit in 2 to supply sufficient lanes to each slot 50/50)......
it has nothing to do with SLI at all as that is fine even if you has a x16 and a x8 slot and enougth lanes to feed both at there full lane allocations the SLI feature would engage regardless even with split lane speed on the 2 cards like that as all SLI needs is at least 8 lanes on each and so 1 would be just at it and 1 2X above (its to do with the boards architecture not the implementation of SLI as the 2 x16 physical slots are linked to 1 bank of 16 PCI-E lanes only)..... (nearly all 990XA chipset boards have that limitation and the only way they can make that better is to implement PLX splitter chips to create a multiplication of lanes but they have there own problems as its another step between the CPU and PCI-E slots as then its not PCI-E - Multiplex chips (used to allow coms to the CPU) - CPU it becomes PCI-E - Multiplex chips - PLX Splitters - CPU and they are expensive too and are reserved for only the very high end stuff eg: GD80 if price dictates some extras of that sort of line or on intel ones like a M-power MAX will maybe have them if its deemed necessary)
the x8 - x8 with 2 cards is just due to limited lanes and there is no way to make the top one x16 unless you only put in 1 card in as then the top slot has all the 16 PCI-E lanes that are available... -
Z77A-GD65 + GTX 275 SLI not working?
So I bought myself a new system yesterday, the MSI Z77A-GD65 motherboard with an i7 3770k processor. Everything installed fine, and the system is up and running. The only thing I cannot get working for the life of me is the SLI on two exact brand GTX 275 cards. The old motherboard I had before was a xfx 780i, and the SLI worked flawlessly on it.
The bios version I am running right now is the B5 bios (which I believe is the latest version).
Some of the things I did were, uninstalled the LAN drivers, then installing the nvidia drivers, updated the LAN drivers to the newest version, uninstalled Realtek's HD AUDIO driver, then trying the nvidia install, installed nvidia's beta drivers (301.24), turned on PCIE GEN3, and reinstalling the drivers using a clean install.
Does anyone have any advice on this? I am all out of options on my end. I even changed the SLI cable positioning on the graphics card by placing it closest to the back of the computer, then putting it on the next connectors going to the front of the case.
The only options I see in the nvidia control panel is the physx option, and I can either choose geforce gtx 275 or CPU... So I am wondering if maybe the integrated video is interfering with it? but I don't know how to disable it, or if you even can.
Any help would be greatly appreciated.
Thanks guys!Quote from: Bernhard on 03-May-12, 14:37:59
Check the mainboard settings in the BIOS.
Go to Advanced settings.
Enter the Integrated Graphics Configuration.
Disable Virtu technology and select your discrete card as the initial GPU under Initate Graphic Aadapter.
Check that IGD multi monitor is disabled.
This is taken from my Z68, but I imagine your BIOS being pretty similar.
Give that a try and see if it helps.
I do have that all disabled with no go... I don't think I ever enabled it.
Quote
The problem may be with the enabling of PCI-E 3.0. The VGA's you have are 2.0.
I enabled PCI-E 3.0 as a last resort because when the GEN3 option was off, it wasn't working, so I turned it on to see if that would fix it, but that was a no go too... -
MOVED: MSI EX630 SLI not working!
This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=177136.0Quote from: darkhawk on Today at 15:25:53If its crashing with 1 driver version and not crashing with another driver version, that pretty much would indicate a bad driver.
Sew333 you are not the only perso... -
Y410p, Y510p: SLI is not working in Win 8.1
QuestionWindows 8.1 is now available. With the latest Nvidia drivers for 8.1 x64, SLI is not an option. There are various suggestions to roll back to earlier (or earliest) Nvidia drivers for a solution. It is true, that with these drivers, SLI is now an option - and it is possible to set it to Enabled. However, it doesn't work.
I have 8.0 and 8.1 in dual boot, for easy comparison. SLI in 8.0 - clearly working... great performance.
SLI in 8.1 - not SLI performance, and in GPU-Z, it is clearly shown that one GPU is not under any load (also, not getting hot... further evidence).
At the moment, I have to use the 8.0 install only for gaming. Can someone please tell me -
1. Is 8.1 currently supported for the Y510p
2. If so, when can we expect drivers for SLI
3. Has anyone found a good workaround?
AnswerAfter updating to Windows 8.1 and related Nvidia graphic card drivers, customers may experience the following symptoms
- Second graphic card is not detected or SLI is disabled
- Nvidia panel indicates only one graphic card instead of two
- Can install the graphic card driver but SLI is not working
- SLI is enabled with legacy drivers but performance drops
You need to update vBIOS (video BIOS) which Lenovo just released it on 29 Oct 2013.
IdeaPad Y410p, Y510p:
NVIDIA GeForce GT750M Second VGA BIOS Update for Windows 8.1 (64-bit) - IdeaPad Y410p, Y510p
NVIDIA GeForce GT755M Second VGA BIOS Update for Windows 8.1 (64-bit) - IdeaPad Y410p, Y510p
Attention: Do not power off or restart your computer during the VBIOS flashing process, which will cause serious damage and improper functioning of your computer.
For Y400 and Y500 vBIOS, please check out this knowledge based article for more info.So I got off from talking with Lenovo Rep. I also wanna get the y410p with sli. He/She seemed kinda slow... but oh well.You have been connected to ^Sirish Tallapragada.
Thank you for contacting Lenovo Sales Chat. My name is Sirish. My rep id is 2900713381. Happy to help you today.
Hi I am interested in purchasing the y410p either with nvidia 750m or 755m sli. Do you have any idea when they are releasing the ultrabay graphics modules for these? They already have the ultrabay 650m for the y400s so I'm guessing you guys will continue the trend.
Yes, We have that machine.
Yes, but they only have one graphics card in it. Is there an ultrabay module for the y410p's?
on the site, its called sli, like the y510p's do
The Y410p is available with the GT750m and the GT755m
Yes I know, but there is an ultrabay slot in the Y410p.
Which can be used to put in another gt750m/gt755m graphics card. This can be done on Y510p via putting this in: (I gave the link for the ultrabay 750m for y510p/y500)
will this option be available for the Y410p is my question
Okay
Will lenovo release the card I mentioned above that fits the y410p? The current one only fits the y510p
The link that you gave is for Y510p
I know.
Will you release a similar model that fits the y410p?
Yes, We will do that.
That might be available next month
Ok, great, I am looking forward it as a Christmas present. Thanks, that's all my concerns for today
I've heard other forums saying that they keep on saying in on month but I don't trust lenovo anymo.... -
MSI P6N SLI Platinum- Wake on Keyboard Not working
Minor issue...... but the wake on keyboard is not working consistently. I still have version 1.0 of the bios. I can set it in the power management and it works! maybe once..... then nothing. Works again (once) when you reset it. But doesn't consistently stay working! I have a USB mouse, so the wake on PS2 mouse isn't happening.
Any thoughts?
It's not a huge issue but I would like the bios options to be working as it looks like they were intended. It's just different in that my last 3 machines I could turn on from hitting a key on the keyboard and not having to get the power button on the case. I'm using the same Microsoft corded keyboard that was working for this on the last build.Quote from: uzzi on 02-May-07, 11:52:23
No I have the SLI MB, this web site was from a MSI tech, the web site is ftp.msi.com.tw/ with not only all the BIOS files but the most updated divers. I could never find these files on their web site before. Here's the web site for the MS-7350 MB ftp://ftp.msi.com.tw/BIOS/7350/.
I did get it resolved with the wake on S3 Mode, you know hit any key. Here's the test to tell if your MB is good or bad. The easiest way is go into BIOS and turn on your number lock, make sure the light is on your keyboard, also make sure your bios is in "S3" mode w/hit any key option on. While in bios turn off your PC w/the case PB, does your number lock light stay on? If it does, your PC will boot-up. I can repeat this over and over. If you get the same results, the next test will be the last. when you turn the PC off in Bios, and the number lock light stays on, switch off your power supply, and wait about 10 sec. and then turn your power supply back on, if your keyboard number lock light never came back on, your "S3" mode on your MB is BAD according to the MSI tech. I like this MB, but it's time for a RMA. I hope the next MB wakes up right.
Uzzi
Uzzi, Did what you suggested and the light stays on when turning the PB off but then turns off and does not come back on when the power supply is cycled. I sent in a tech support request to MSI Tech. Did they tell you to RMA it? I guess I could send it back to the Egg for replacement..... but hate to keep eating shipping costs! -
MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help
This topic has been moved to AMD64 nVidia Based board.
MSI K8N SLi Platinum Duall Channel not work? Please helpQuote from: iggsy on 29-July-05, 06:03:49
Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
Mine does the same thing at the startup screen but not on cpuz...go figure. Just my 2 cents. -
MSI Gaming app does not work with SLI
I'm now doing SLI with two 770's and the Gaming app does not work. I follow the instructions that tell me to disable and then enable SLI for it to work but it does not work.
Simply don't use the gaming APP but the more advanced Afterburner: >>How to use MSI Afterburner<<
-
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Remote not working with WinXP 64
I have a X-FI Platinum card with the front module and remote. Under WinXP Pro everything worked fine. I have since upgraded to WinXP 64 bit Pro and the remote does not work.
I have installed the latest driver for WinXP 64 (At least last weeks driver) which went OK. Soundcard seems to work OK. I have a 5. speaker setup and I get sound from all speakers. Before there was the createi've audio console that was in the system tray, but that doesn't seem to be there with WinXP 64.
Is there another download that I need to do for the Remote to function ? Also I no longer have any sound test options in the audio console is there another download for that as well ??System Specs:ASUS P5N32 SLI Deluxe MOBOIntel P4 660 processor2 GB RAMBFG 7800 GT video cardX-FI Platinum sound cardWinXP Pro 64 bit?Thanks,?wstreakerI am not sure whether the remote software gets installed with the 64 bit drivers or not. I know some people have turned to alternate software to control the remote on WinXP 64 bit edition successfully. I am sure you can find out what I mean by searching these forums, I am not allowed to say any more than that. Hope that helps?
-
Hi Guru's,
This is my program . There is no syntax error but while debugging this below loop it is not working
( LOOP AT i_vbrk WHERE vbeln = i_vbak-vbeln. ), Please correct my program if anything is wrong or suggest me what do to.
REPORT zsdr_omvsa40.
TYPE-POOLS
TYPE-POOLS: slis.
TABLE DECLARATIONS
TABLES : vbak, vbkd, zzvbak, kna1, vbrk, vbrp, knvp .
INTERNALTABLE DECLARATION *
DATA: BEGIN OF i_vbak OCCURS 0,
vbeln LIKE vbak-vbeln, " Sales Order no
erdat LIKE vbak-erdat, " Date on Which Record Was Created
kunnr LIKE vbak-kunnr,
ps_psp_pnr LIKE vbak-ps_psp_pnr, " Work Breakdown Structure Element
END OF i_vbak.
DATA : BEGIN OF i_zzvbak OCCURS 0,
vbeln LIKE zzvbak-vbeln,
zssidc LIKE zzvbak-zssidc, "Salesman ID
END OF i_zzvbak.
DATA : BEGIN OF i_vbrk OCCURS 0,
vbeln LIKE vbrk-vbeln,
fkdat LIKE vbrk-fkdat, "Invoice Date
END OF i_vbrk.
DATA : BEGIN OF i_kna1 OCCURS 0,
pstlz LIKE kna1-pstlz , " Postal Code
kunnr LIKE kna1-kunnr , " Customer Number 1
name1 LIKE kna1-name1, " Customer Name
END OF i_kna1.
DATA : BEGIN OF i_vbrp OCCURS 0,
vbeln LIKE vbrp-vbeln,
aubel LIKE vbrp-aubel,
netwr LIKE vbrp-netwr , " Net Value in Document Currency
kzwi1 LIKE vbrp-kzwi1, " Subtotal 1 from pricing procedure for condition
erdat LIKE vbrp-erdat, "Billing document.
END OF i_vbrp.
DATA : BEGIN OF i_knvp OCCURS 0,
parvw LIKE knvp-parvw , " Partner Function
kunnr LIKE knvp-kunnr ,
parnr LIKE knvp-parnr , " Number of contact person
END OF i_knvp .
DATA : BEGIN OF i_data OCCURS 0,
erdat LIKE vbak-erdat, " Date on Which Record Was Created
vbeln LIKE vbak-vbeln, " Sales Order no
fkdat LIKE vbrk-fkdat, " Invoice date.
kunnr LIKE kna1-kunnr , " Customer Number 1
ps_psp_pnr LIKE vbak-ps_psp_pnr, " Work Breakdown Structure Element
name1 LIKE kna1-name1, " Customer Name
netwr LIKE vbrp-netwr , " Net Value in Document Currency
kzwi1 LIKE vbrp-kzwi1, " Subtotal 1 from pricing procedure for condition
parvw LIKE knvp-parvw , " Partner Function
parnr LIKE knvp-parnr , " Number of contact person
zssidc LIKE zzvbak-zssidc, "Salesman ID
pstlz LIKE kna1-pstlz , " Postal Code
END OF i_data.
ALV Declaraton
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
it_listheader TYPE slis_t_listheader,
gd_repid LIKE sy-repid.
Selection - Screen
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS creation FOR vbak-erdat . " Sales Order Date
SELECT-OPTIONS period FOR vbrk-fkdat . " Invoice Date
SELECT-OPTIONS order FOR vbak-vbeln . " Sales order no
SELECT-OPTIONS name FOR kna1-name1 . " Customer Name
SELECT-OPTIONS contact FOR knvp-parnr . " Contact Name.
SELECT-OPTIONS ssid FOR zzvbak-zssidc . " Salesman ID
SELECT-OPTIONS project FOR vbak-ps_psp_pnr . " Work Breakdown Structure Element
SELECTION-SCREEN : END OF BLOCK b1.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM BUILD_LAYOUT.
PERFORM top_of_page.
PERFORM fill_listheader USING it_listheader.
PERFORM display_alv_report.
END-OF-SELECTION.
*TOP-OF-PAGE.
TOP-OF-PAGE.
END-OF-PAGE.
*& Form BUILD_FIELDCATALOG
text
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'KUNNR'.
fieldcatalog-seltext_m = 'Sold to Party'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NAME1'.
fieldcatalog-seltext_m = 'Hlev Customer'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PARNR'.
fieldcatalog-seltext_m = 'Contact name'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PS_PSP_PNR'.
fieldcatalog-seltext_m = 'Project ID'.
fieldcatalog-col_pos = 3.
fieldcatalog-do_sum = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'VBELN'.
fieldcatalog-seltext_m = 'Sales Document Type'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ZSSIDC'.
fieldcatalog-seltext_m = 'SSID'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ERDAT'.
fieldcatalog-seltext_m = 'so date'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'FKDAT'.
fieldcatalog-seltext_m = 'inv date'.
fieldcatalog-col_pos = 7.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'KWZI1'.
fieldcatalog-seltext_m = 'gross amt'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'net amt'.
fieldcatalog-col_pos = 9.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PSTLZ'.
fieldcatalog-seltext_m = 'Postal code'.
fieldcatalog-col_pos = 10.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. "BUILD_FIELDCATALOG
*& Form DATA_RETRIEVAL
text
FORM data_retrieval.
SELECT vbeln erdat kunnr ps_psp_pnr INTO CORRESPONDING FIELDS OF TABLE i_vbak
FROM vbak WHERE erdat IN creation AND vbeln IN ORDER AND
ps_psp_pnr IN project.
IF NOT i_vbak[] IS INITIAL.
SELECT vbeln aubel netwr kzwi1 FROM vbrp INTO TABLE i_vbrp
FOR ALL ENTRIES IN i_vbak
WHERE aubel = i_vbak-vbeln.
SELECT vbeln fkdat FROM vbrk INTO TABLE i_vbrk FOR ALL ENTRIES IN i_vbrp
WHERE vbeln = i_vbrp-vbeln
AND fkdat IN period.
SELECT pstlz name1 kunnr FROM kna1 INTO TABLE i_kna1 FOR ALL ENTRIES IN i_vbak
WHERE kunnr = i_vbak-kunnr
AND name1 IN name.
SELECT vbeln zssidc FROM zzvbak INTO TABLE i_zzvbak FOR ALL ENTRIES IN i_vbak
WHERE vbeln = i_vbak-vbeln
AND zssidc IN ssid .
select netwr kzwi1 erdat from vbrp into table i_vbrp for all entries in i_vbak
where erdat = i_vbak-erdat.
SELECT kunnr parnr parvw FROM knvp INTO CORRESPONDING FIELDS OF TABLE i_knvp FOR ALL ENTRIES IN i_vbak
WHERE kunnr = i_vbak-kunnr
AND parvw = 'AP'
AND parnr IN contact.
ENDIF .
LOOP AT i_vbak.
LOOP AT i_vbrk WHERE vbeln = i_vbak-vbeln. " ( From this loop it'snot working)
LOOP AT i_kna1 WHERE kunnr = i_vbak-kunnr.
LOOP AT i_zzvbak WHERE vbeln = i_vbak-vbeln.
LOOP AT i_vbrp WHERE aubel = i_vbak-vbeln.
LOOP AT i_knvp ." where kunnr = i_vbak-kunnr.
CLEAR i_data.
MOVE i_kna1-kunnr TO i_data-kunnr.
MOVE i_kna1-name1 TO i_data-name1.
IF i_vbak-kunnr = i_knvp-kunnr .
MOVE i_knvp-parnr TO i_data-parnr.
ENDIF.
MOVE i_vbak-ps_psp_pnr TO i_data-ps_psp_pnr.
MOVE i_vbak-vbeln TO i_data-vbeln .
MOVE i_zzvbak-zssidc TO i_data-zssidc.
MOVE i_vbak-erdat TO i_data-erdat.
MOVE i_vbrk-fkdat TO i_data-fkdat.
MOVE i_vbrp-netwr TO i_data-netwr .
MOVE i_vbrp-kzwi1 TO i_data-kzwi1.
MOVE i_kna1-pstlz TO i_data-pstlz .
APPEND i_data.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM i_data.
*refresh : i_data.
*free : i_data.
*LOOP AT i_data.
ENDFORM. "DATA_RETRIEVAL
*& Form DISPLAY_ALV_REPORT
text
FORM display_alv_report.
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = fieldcatalog[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = i_data.
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2 .
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
ENDFORM. "DISPLAY_ALV_REPORT
FORM FOR FILLING LISTHEADER *
FORM fill_listheader USING it_listheader TYPE slis_t_listheader.
DATA : wa_listheader TYPE slis_listheader.
wa_listheader-typ = 'H'.
wa_listheader-info = 'Noel Gifts International Limited '.
APPEND wa_listheader TO it_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = 'CUSTOMER CREDIT EXCEPTION REPORT' .
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
ENDFORM. "fill_listheader
*& Form top_of_page
text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader.
ENDFORM. "top_of_page
Thanks and regards,
R.Vinod.sorry i sdint go through your entire code but it seems to me may be some conversion problem i.e. with leading zeroes. just check that...
you may have to use
fm after first loop at
LOOP AT i_vbak.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = i_vbak-vbeln
IMPORTING
OUTPUT = i_vbak-vbeln
LOOP AT i_vbrk WHERE vbeln = i_vbak-vbeln.
it will give a leading zero.
if you want to delete the leading zeroes from i_vbak-vbeln then use
LOOP AT i_vbak.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = i_vbak-vbeln
IMPORTING
OUTPUT = i_vbak-vbeln
LOOP AT i_vbrk WHERE vbeln = i_vbak-vbeln.
just check in debugging mode what conversion you need
regards
shiba dutta
Maybe you are looking for
-
How do I use my own music for a ringtone?
I just got the iphone 4s. All my music has been loaded on to the iphone. How do use that music to make pick out my own songs? Or do i have to pay for them again in the ringtone store? thanks
-
Creation of Stock transfer order using BAPI
Dear Gurus, I was trying to create Stock transfer order using BAPI function BAPI_PO_CREATE though i have defined Bsart as 'UB' still it gives message : " No master record exists for vendor MOH1 " Please
-
OS X 10.4.6 DiskWarrior 3.03
OS X 10.4.6 DiskWarrior 3.03 crashes when I hit OK after a rebuild has been completed. I believe this problem is related to the 10.4.6 update. DiskWarrior 3.03 is installed on my hard drive, I am not using the disk. This problem started after the upd
-
I changed from Vodavone to Orange, and I can't use the telephone anymore. Is there anyone who knows how to solve this problem?
-
Automatic batch separation in VL10 - Enhancement
Hi Experts, I'm working on an enhancement in VL10. Customers class with high priority are selected and they should be allocated high quality batch while the less priority customers will get items which are less in quality compared to t