SLI with 2 8800 GTS 640Mo

Hello,
I'm a french customer, so don't care about my english
I have some troubles with my two 8800 gts cards. The SLI mode stay disable.
This is my configuration:
*Vista 32 ultimate
*ASUSTeK Striker Extreme (NVIDIA nForce 680i SLI)
*Intel Core 2 Duo E6750
*Kingston 2 Go DDR2-SDRAM PC6400 CL4 (2 x 1 Go)
*MSI NX8800GTS-T2D640-HD-OC- 640 Mo ! overclocked version !
*MSI NX8800GTS-T2D640-HD- 640 Mo ! normal version !
*Cool Master Real Power M1000 (1000 watts)
I used NiBiTor to look the difference, and I find that bios version is not the same.
Version 60.80.07.00.02 for the normal version.
Version 60.80.0A.00.02 for the OC version.
Do I need to flash one card to enable the SLI mode ?
Anyone have an idee ?
PS: * I placed the bridge between the 2 cards
* Nvidia driver version is 169.25

Does both VGA's are detected by OS?
Yes all detected
Have you connected power cables to each VGA's?
Yes
Make sure that your VGA's are located in correct PCI-E slots.
Both on 16x
Make sure that you have all Vista patches installed
Thanks for it and installed
Does it work in XP?
I don't have any version of XP, so i can't check this point :/
Verify SLI status with Everest:
I don't have the same as you
I make a report via Everest. Perhaps that helps you ...
http://spacefrog.no-ip.org/ReportG80SLI.htm
*I've flash the bios of my MB (Extrem Striker) with the last one (1401).
*I checked all option in BIOS and something ode ... "SLI-Ready Memory" are disabled and I can't change it.
Is it because my RAM is not compatbile ?
I turn around and i don't anderstand why SLI don't want to be enable ... I'm crying

Similar Messages

P6N SLI with Geforce 8800 GTS 640 MB won't install Windows

Hi all,
After a reply in the topic for updating your bios.
I was advised to ask the solution for my question here before flashing my Mobo.
My Specs:
Intel Core 2 Duo 6600
4 GB DDR-2 (4 slots)
Geforce 8800 GTS 640 MB PCI-Express
Sitecom WL-171 wireless lan card.
500 GB Hitachi SATA Disk
1 DVD burn/reader
P6N SLI Mainbord with Beta Bios because it wasn't able to use 4 GB Ram at that time.
Zalman 460 Watt
Now the problem
First it was working but with a Geforce 7600 GT 256 PCI-Express.
I have upgraded it today to a 8800 GTS.
After this upgrade my Vista won't boot anymore, same for my Ubuntu.
What is causing the problem?
Is my Powersupply not strong enough or should I flash my bios?
Thanks in advance.
edit: Windows XP 32 or 64 bit. Vista 32 or 64 bit all gave the same stop error: 0x000007e
The knowledge base sais it is a driver problem?
But it isn't even installed.

Check VGA power cable too.
"But it looks like it is the Power Supply or the Videocard.
Should this Power Supply succeed? Coolermaster"
look here for good PSU suggestions:
Corsair VX450W:
• ATX 2.2 and ATX 2.01 compatible
• Ultra-quiet 120mm double ball-bearing thermally controlled fan
• High efficiency, up to 85% under a wide load range
• Single +12V rail offers maximum compatibility with latest components
• Supports SATA and PCI-E devices
• High-quality Japanese capacitors
• Active Power Factor Correction (PFC) with PF value of 0.99
• Auto-Switching universal AC input from 90~264V.
• Over Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection
• Extra long fully-sleeved cables support full size tower chassis
• Standard ATX PS/2 size: 5.9"(W) x 3.4"(H) X 5.5"(L); 50mm(W) x 86mm(H) x
• 5 Year Corsair Warranty
Review: http://www.silentpcreview.com/article751-page1.html
-----> https://www.novatech.co.uk/novatech/specpage.html?CSR-VX450 £39.95
Corsair VX550W:
• Supports the latest ATX12V v2.2 standard and is backwards compatible with ATX12V 2.01 systems.
• Ultra-quiet 120mm double ball-bearing fan delivers excellent airflow at an exceptionally low noise level by varying the RPM in response to temperature.
• Double-forward switching circuitry design offers maximum efficiency, up to 85% under wide load range.
• 99% Active Power Factor Correction provides clean and reliable power to your system.
• Universal AC input 90~264V automatically scans and detects the correct voltage. No more hassle of flipping that tiny red switch!
• Dedicated single +12V rail offers maximum compatibility with latest components.
• Over Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical system components.
• High quality Japanese capacitors provide uncompromised performance and reliability.
• 6 Serial ATA connectors
• Extra long cables support full tower size chassis.
• Standard ATX PS/2 size: 5.9"(W) x 3.4"(H) X 5.5"(L); 150mm(W) x 86mm(H) x 140mm(L)
• MTBF: 100,000 Hours
• Safety Approvals: UL, CUL, CE, CB, FCC Class B, TÜV, CCC, C-tick.
• 5 Year Corsair Warranty
http://www.play.com/PC/PCs/4-/3476852/Corsair-VX-550-PSU-Power-Supply-Unit-550W/Product.html £59.99[/color]
Newest great PSU's Series TX from Corsair:
http://www.corsairmicro.com/products/tx.aspx
650W & 750W Models:
PC Power & Cooling Silencer 610 with 49A on a single +12V rail.
or
PC Power & Cooling Silencer 750 with 60A on a single +12V rail.
Tagan TG480-U01: http://www.scan.co.uk/Products/ProductInfo.asp?WebProductID=82572 http://www.hexus.net/content/item.php?item=694&page=2
ENERMAX Whisper II EG465P-VE FMA(24) 460W (+12V@33A) ---> http://www.avadirect.com/product_details_parts.asp?PRID=1925 approx. $82
ENERMAX EG651P-VE FM(24P) ATX 550W Power Supply (+12V@36A) http://www.enermaxusa.com/catalog/product_info.php?products_id=70 approx. $98
OCZ PowerStream 520W (under rated +12V@33A)---> http://www.ocztechnology.com/products/power_management/ocz_powerstream_power_supply
approx. 110$
Silverstone Zeus ST56ZF 560W (+12V@38A) ---> http://www.silverstonetek.com/products-56zf.htm approx. 110$
Sparkle 550W (EPS) FSP550-60PLG (+12V@36A) --> http://www.sparklepower.com/pdf/FSP550-60PLG.pdf approx. $76
Antec TruePower550W EPS12V (+12V@36A) ---> http://www.antec.com/us/productDetails.php?ProdID=20551 approx. $86
ENERMAX EG651P-VE FM(24P) ATX12V V1.2 550W:
+3.3V@36A; +5V@36A; -5V@1A; +12V@36A; -12V@1A; [email protected]
http://www.newegg.com/Product/Product.asp?Item=N82E16817103437
Good PSU vs Cheap/Unamed/Budget PSU Oscilloscope scan:
Bad PSU:
Quality PSU:
Cheap PSU Codegen 350W:
Enermax 365EG(350W):
What would happen if your PSU can't cope with the load?
* bad 3D performance
* crashing games
* random shutdown
* spontaneous resetting PC
* freezes during gameplay
* PSU overload can cause it to break down
Add-on to read:
PSU's---2 x 12v---The Dual Rail Myth
Is your problem caused by your PSU?

Dual Core Center- MSI P6N SLI Platinum and MSI 8800 GTS 640

I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything. ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card.
Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
{I'll put this in the graphics forum too as it hits both areas...}

Running a P6N SLI Platinum and a MSI 7900GTO with Dualcorecenter 2004 and everything is ok.
Never installed any driver from the MSI CD which comes with the board or graphics card. All drivers are downloaded
from Nvidia.
Maybe the 8800 series is not supported yet.

Big problem with AE CS3 - abnormal slow with nvidia 8800 GTS 512 !

I try everything, newest drivers (nvidia 8800 GTS 512), older drivers, beta drivers, alternative drivers, uninstall QTime, disable OpenGL in After Effects, delete openGL plugin.... Simply, did not help. AE CS3 is abnormal slow, type text, draw and edit mask, any kind of moving element , moving windows (interface).... everything. When turn on openGL, openGL work fine, fast, smooth., but non openGL operation (written above), still the same! I did some test and found that similar problem have with encore (not my primary application, but...). Other programs work perfectly (premiere, photoshop, illustrator). I have core2 quad 6600 @ 3 GHz, 3 GB RAM, 8800 GTS 512 @ 2560 x 1600, win XP pro strong configuration but unusable for AE CS3!!! I try to reduce resolution, but also, did not help.
Please, is there anyone with some solution? Is problem with AE or drivers? Thanks.

>My 8800GT is not going to work with AE and it's listed under Adobe's
>supported graphic cards????
That's premature to say. Please understand that in the OpenGL game there are just too many varaibles, a lot of them outside the control of Adobe or any other software vendor for that matter. Please consider the following:
- if tested, a card is usually tested in one configuration available at the time that presumably will be the most common one bought by users. There is room for better sub-versions (more VRAM, higher memory clock), as well as weaker ones (less VRAM, lower clock speed).
- the previous applies to the host computer. Nobody can test the 100 new different motherboards that come out every month let alone all that are already on the market. Same for RAM, processors, other peripherals.
- multiple vendors may produce cards based on the same design, but may use different BIOSes and branding
- even under ideal conditions, a given graphics card will be tested in about 30 different computer or so - some in Adobe's lab, others with Beta testers. As it stands, neither of them will necessarily coincide with your configuration nor will anyone throw a lot of money out of the window just to buy a hundred new testing machines...
- BIOS configuration, motherboard voltage fluctuations, PCI timings and whatnot can vary from user to user and thus have drastically different influence how a certain component behaves.
- lastly, driver configuration can vary. Even with seemingly the same driver version, the config may auto-adapt to different settings based on the environment it finds.
So given all of the above, please understand that this is a *******' tough job and by all rights nobody intentionally tries to scam users or something like that. You will also find it hard to blame anyone in legal terms, as you usually agree to use the software "as is" - with all it's flaws. As David says - please try first. We will gladly try to help you sort out any issues and who knows - none of the problems affecting other users may come down on you and you'll be a happy camper after all.
Mylenium

Dual Core Center- MSI 8800 GTS and MSI P6N SLI Platinum.

I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything. ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card?
Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
{I put this in the MOBO forum too as it hits both areas...}

Found that AtiTool (latest beta) works on the 8800's. The "find max core" and "find max memory" don't work perfectly though, as they start the overclock and then are supposed to check for errors; they are supposed to stop the adjustment upward when they encounter erros and come back down...... AtiTool just kept cranking it up, although you could visibly see the little 3D screen artifact all over the place. But It gave a good starting place to do the OC manually and then go run the scan for artifacts and errors manually. AtiTool listed the stock core at 513 and stock memory at 792. I was able to take the core up to ~644 and the memory up to ~877. I backed these off some (as you can't run both at max!) and it looked stable at 630 core, 860 memory. Ran through both 3DMark 05 and 3DMark06 without a hitch. Need to check it out with some extended gameplay now.

23" Cinema Display with DVI-ADC Adapter. Won't turn on with 8800 card...

I am running Windows XP on a pc. I have had the ACD 23" with the DVI to ADC adapter for 4 years now and it has been flawless. I ran this using an nVidia 6800 Ultra card and then an 8800 GTS 640 MB card. All was well. I just got a 2 new cards for 2 diferent pc's and neither will recognize or turn on the monitor. Both a brand new HD 2600 pro ATI card and an NVidia 8800 GTS 512 card. The monitor works fine with my 2 PC laptops via their DVI connections and my MBPro. So it appears the monitor is fine. This is not the "can't see the monitor in the bios" issue, I can't even use it as an additional monitor in dual view mode when at the desktop as it is not recognized as being connected. Any ideas?
PS I also applied the latest bios update to the nVidia card from EVGA.
Thanks,
Reed

Did anybody find a solution for this?
I bought a new T420s. The second week I had to send it in service because it was not turning on anymore. I couldn't convince them that the laptop suddenly restarts several times a day. And only after two weeks when it did not start anymore they told me to send it in the service.
No they brough it today. They made my day happy for 10 minutes until I turned it on and the wireless problem described in this topis apeared. The Inetl diagnostics tools installed with the card say: "Hardware radio is off". It worked before being send into the service.
Now, the wireless switch is on and I see the adapter installed by "no wireless connections available".
Pressing Fn-F5 it tells me to turn on the radio (the switch thing). But that is already turned on.
So I called again to ask them what is wrong. They told me they would send me a new mini wireless card that I can replace myself. I received it today, replaced it. BUT THE SAME BEHAVIOR!!! (((((((((((((((((((((
So I wonder, can the service guys (Wädenswil, CH) be so unprofessional to have forgotten to connect/enable the switch button?
PS:
1. The wireless LED is not turned on at all.
2. BIOS has wireless enabled
3. Device Manager sees the unknown network adapter (when driver uninstalled) and the Intel Wireless adapter (when driver installed)
(This double failure means a divorce from Lenovo products for me. Once I solve this issue I sell the laptop.) Yes I know service is better than other, but I want something that doesn't need it at all.
At least the Dell guys send a guy (freelancer service guy) at my place to fix the isssue. Now it is not only the costs for shiping it and investigate the problem (that are on my side) but also the productivity problem now costing us more than one month not beneffiting 1 minute from this laptop.
A very sad,
Gabriel

8800 GTS do not support 8x and 16x antialiasing?

Hello
When I change my antialiasing settings in Doom 3 to 8x or 16x and then restart the app it
keeps reseting to 4x. Also, in the config-file it only seems to recognize 256 MB VRAM, 8800 GTS has 512.
Is this a bug in the Doom 3 app or is it the 8800 GTS drivers or is there an actual solution to this?
Thanks in advance!

Quote from: Glacial on 20-December-06, 03:17:08
Don't worry I will do the CPU upgrade thing, it's a future plan.
I bought the 8800, as a replacement for my old 6600GT which is sorta dead!
Ok, seeing as I seem unable to find a decent single rail PSU on UK sites how about this:
http://www.ocztechnology.com/products/power_management/ocz_gamexstream_power_supply-nvidia_sli_ready_
It has 4 rails!
On further research i've discovered that OCZ tell which rail is attached to what.
One for the CPU
Another one for CPU and PCI-E
One for Peripherals including SATA
One dedicated PCI-E
What d'ya think?
Cheers guys.
Forget about split-rails, get a decent single-rail.
Tagan has nice ones, that can be combined with a switch!

8800 GTS 512 OC - Runs in 3D for few minutes then freezes

Hi there.
I just got an 8800 GTS 512 OC, upgrading from a Radeon 1950 XT. The card works fine in 2D (it's in the machine as I type this). But when I try to play any game, it works fantastically for a few minutes (or seconds depending on how intensive the game is), and then freezes completely, with sound looping endlessly. I have to reboot to get out of it.
I got the latest WHQL driver from Nvidia, 169.25, but that didn't help things. Oh, and don't worry, I removed the old ATI drivers and ran DriverClean Pro to remove any hidden remnants before I installed the card and drivers.
I cannot use MSI Live Update, because as soon as I install it, I get a BSOD after rebooting:
flashsys.sys,
page fault in non-page area
0x00000050 (0xBAB78000, 0x00000000, 0xBADF71B0, 0x00000000)
Thinking it might be an OS issue, I then reformatted the system and ran a clean install of windows, but the same thing happened again. Makes me suspect that this is a hardware issue, since it seems the new WHQL driver is working jsut fine for other people.
My system has worked fine until this card was installed, but here are my system specs for reference:
System specs:
E6600 at stock speed cooled by Zalman 9500 mod with Noctua 120mm fan
Asus P5K-Deluxe, with P-ATA, Firewire, LAN og WLAN controllers disabled.
2GB Corsair Dominator 8500 @ 1066 v/ 5-5-5-18, 2.2V
Corsair HX-620W PSU (should be more than enough juice)
D-Link DWL G510 PCI Wifi kontroller
NEC Optiarc 7170 Sata II DVD burner
Seagate Barracuda 7200.10 500MB Sata II (houses C: partition + E: storage)
Old Maxtor 320GB Sata I (storage, D:)
Gigabyte 3d Aurora case fans: 1x120mm front, 2x120mm back
and of course:
MSI 8800 GTS 512 OC, ved 730core 1944 mem, with Forceware 169.21 WHQL
Running legit Windows XP Professional SP2, fully updated.
other processes:
ESET Smart Security
Logitech SetPoint
Soundmax panel for onboard sound
The card also fails while testing with ATITool artifacts scanner. A worrying thing I have noticed is that the fan speed does not adjust as temperature increases. Instabilities while running ATITool start when the card hits around 75C, and gets worse and worse as it passes 80C. Fan still runs at same speed. Might be a fan controller issue, but this card should not be having problems at 75C-85C.
I should specify, that it does not actually fail the artifact test...it just starts freezing, then going again, then freezing, then going again, until it freezes completely.
I really do not know what to do next. I think my card is just plain faulty, so thinking of RMA. If anyone has any ideas or advice, please please help me out.
Best regards,
Mikkel.

Quote from: BOSSKILLER on 23-December-07, 01:18:06
Setup VGA mem. freq. to 1872Mhz and re-test.
OK, I just tried out your suggestion, but sadly, the same thing happens. I should add that it does exactly the same thing when just running the 3D view
Also that the card emits a high-pitch modulating whining noise (it is not bearing noise from the fan, it sounds more like a high-pitch capacitor buzz), is that supposed to be there?

NVida + 7900GTX + 8800 GTS 512 + 3 LCD's - Single Desktop Fail

I've been trying to get this to work for months - literally months (on Fedora, Ubuntu, Gentoo, and now Archlinux, which is where I'll stay), with no success. All I want is the ability to use a single desktop across all three LCD's. This is what the setup is:
Geforce 7900 GTX
- 1600x1200 LCD
- 1600x1200 LCD
Geforce 8800 GTS 512
- 1920x1200 LCD
I can get everything to work flawlessly as 3 seperate screens. When I turn on xinerama (and turn off randr, or even leave it on), X starts up, shows the root desktop, then bails. If I have Gnome installed, it tells me it's unable to find a valid depth, but if I just have the virgin X with nothing extra but the basics installed, it just drops to the console with no error message of any kind. The Xorg.0.log also shows no errors in either case. Other WM's vary in the messages they generate as well (I now have a VMWare image with snapshots with most major WM's just so I can easily try and switch between various WM's), but all fail the same way.
Since the screens are on different cards, randr isn't an option. I have used many combinations of generating the xorg.conf, as well as writing it by hand, and it always ends up the same way.
I am not new to Linux (nor Unix), but I am new to Arch. It is, finally, the distro I have been looking for for a LONG time. I wished I had noticed it a long time ago and saved myself a lot of hassle. Been a Red Hat/Fedora user since the beginning.
Anybody got any ideas? I can provide the logs and conf's if anyone likes, but I doubt they'll help. I guess what I am hoping is that someone has seen or heard of this before, because failing that, I think I might be SOL.
One last thing: I haven't tried this with the NV driver, but I will try that later today just to see if it's only the NVidia driver that's the problem. I am actually pretty sure it is specific to the NVidia driver, but I haven't verified for _sure_, and I need 3D ability, so the NV driver isn't a long term solution.

Glad to hear it. Well, not really - glad to hear I'm not alone in this. Uh, I think I'll stop before the hole gets deeper...
I've submitted a report to NVidia, but I don't expect I'll hear from them about it since it's not a common problem.
I'm checking into faking the Xinerama extension to see if that can work; Seems plausible, but who knows.
If only I could find a reliable and easy way to move windows between screens, I'd be able to live with the 3 separate desktops.
Thanks for the confirmation that I'm not going insane!

K7tpro(6330) BIOS have BUGs with Geforce2 GTS on linux !

MSI K7T Pro (6330) motherboards working with Geforce2 GTS GPU can't load driver correctly on linux !
I use the newest SBIOS v3.6 and the newest GPU driver NVIDIA-Linux-x86-1.0-7184, While loading driver It report:
Code: [Select]
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NVRM: request_mem_region failed for 496M @ 0xe0ffffff. This can
NVRM: occur when a driver such as rivatv is loaded and claims
NVRM: ownership of the device's registers. nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
I contacted with Nvidia's supporter, They say, If report "request_mem_region failed for 496M @ 0xe0ffffff" that's bec. of motherboard's System BIOS have Bugs, more details on:
http://www.nvnews.net/vbulletin/showthread.php?t=80587
(include all system information and error report )
When MSI could update 6330's BIOS ?

My Geforce card is running well on win32 system. So It will be in order.
I use the offical FC4 release, also the kernel is FC4's release version 2.6.11-1.1369_FC4. The Nvidia's driver is recompiled with Kernel's(2.6.11-1.1369_FC4) source, So there is no compatibility problem. There is no problem on compile-time, But errored while loading nvidia.ko.
As I know MSI-6330 had BIOS peoblem working with Geforce card historically, According to the BIOS update notes:
e.g.: on 2000-09-13 relaseed v1.5 BIOS to fix problem on Geforce 256 and MX card
e.g.: on 2001-08-03 released v2.9 BIOS to fix problem on Geforce2 AGP card ( I use this card )
So It already released serval BIOS updates up to v3.6, I'm afraid there are some hidden problems.
Quote
You are sure the Geforce card is in order? Especially the memory chip?
Please also say what parts you have in the system.

NX 8800 GTS 320 mb OC memory problem

Hi everyone, i have a msi 8800 gts 320 mb OC and my problem is that the graphic card is using the 320 mb always it don't stop
i have a mini aplicacion to see the clock and the fan and the memory and the memory is using 99% of it
How can i solve this problem?

I don't really know what your problem is to be honest. Are you taliking of system or vga memory. If vga memory be aware that there is no power saving on old G80 vgas for the memory.

Eclipse SLI with Corsair TR3X3G1333C9 (OC Quesion)

Hi all,
Just starting out in trying to overclock and was windering what speeds people have managed to get on their rigs. Is there anyone out there that is using the board and memory (Eclipse SLI with Corsair TR3X3G1333C9 3x1GB).
- If there is anyone out there with the same hardware as me and has overclocked it.
- What speeds did you get and what setting did you use?
Thanks All,
Halvare

Hi halvare & welcome to the forum. An Admin. or Moderator will probably move your thread to the forum subject 'Overclockers & Modding Corner'. In the mean time, take a peak at the forum posting guide & other 'Sticky' topics to help with the details needed to provide the best answers for you. Provide a full list of system specs, as this will greatly increase the forum users ability to make recommendations. Use my signature below this post text as an example.

Z97 GD65 Gaming - SLI with GTX 970 works?

Hey whatsup guys, I was looking in the support about SLI compatibility in the Z97-GD65.
My specs is:
i7 4790k
16GB Corsair Vegeance
z97 GD65
Font 1000W Corsair
ssd 480gb Kingston
2T HDD
1x EVGA Geforce GTX 970 SC
Haf 942 X case
I wanna buy another GeForce EVGA GTX 970 SC to run on SLI in this motherboard, it will work?
- The GTX 970 is compatible in SLI with z97 GD65?
- I ask because I don't see in the support list for SLI GTX 970 of this motherboard z97 GD65.
- If its works anyone here already did a real test?

Quote from: geysonhelysson on 13-June-15, 02:10:48
Thanks Remus, you make idea how many percent the performance will be improved with another gtx 970?
25-75% depending on application (game).

Mac Pro with 8800 Card Availability

On Jan 21 ETA for Mac Pro with 8800 card was 2-3 weeks. Now, on Feb 2, ( 12 days later ) ETA is still 2-3 weeks.
Anybody heard anything more definitive?

Why not just go out and buy the "stock" Mac Pro with the default ATI 2600XT card right now, and then just order the Nvidia 8800GT separately. Then when your 8800GT card finally arrives, sell the ATI card for $100 or so on eBay. All you will end up paying is about $70.00 more than the BTO option ($375 (including tax) for the 8800GT as a standalone option, minus $100 for selling the ATI 2600XT=$275 out of pocket cost vs. the $200 BTO option).
That way you can have your Mac Pro right away (as I have for the last 3 weeks), and still get my 8800GT at or around the same time as yours for only a $75.00 difference.
Having my new Mac Pro NOW is worth far more than saving $75.00. Time is $$$$$
My standalone Nvidia 8800GT is scheduled to arrive Feb 28th (according to Apple). I already have a buyer with the 1st. generation Mac Pro that will buy my ATI 2600XT when the 8800GT arrives.
Also, you might even have further delays with the BTO option if Nvidia has supply problems that could drag on into early to mid march if you hang with your current order.

Ms 7253 with nvidia graphic card 8800 gts 512

hi,
im trying to install this graphic card 8800gts 512 but the system or bios doesn't see it
spec´s
mainboard ms-7283 vms
bios w7253vms-v1,6 081607 10:22:02
proc amd 64 x 2 4200+ 2,20 ghz
mem kingston 2 x 1gb
windos xp pro sp 3
power supply m media magic atx p4 750w ws
graph. nvidia 8800gts 512
the vga on the mainboard works, tested the nvidia card in to other systems and there it works perfect
what do i wrong??
thanks
jdtexas

Quote from: Svet on 02-August-11, 01:46:48
have you connected power cables to the VGA?
do >>Clear CMOS Guide<< with power cord removed.
also make 1st VGA the add-on one, if there is a such option
yes it is connected and in this bios version there is not an option for this
i was looking for a bios update but when i go to msi there is non even with liveupdate 5
but i can also see that it doesn't read the mainboard type correctly so live update is not the rigt solution for this

SLI with 2 8800 GTS 640Mo

Similar Messages

Maybe you are looking for