SLI with P6N Diamond not working.

I have installed 2 8800GT's and can't get them to run at 16x in SLI mode. So far I've installed the two cards in the top 2 slots and the 2 white slots. I've installed the bridge. According to GPU Z, the bus interface is operating PCI-E 16x @ 8x in either place.
Is there something I'm missing? Is there anything in the Bios I need to set?

Quote from: badnewcastle on 01-July-08, 00:27:59
Thx was just trying to help and as I stated, I wasnt sure
Next time figure it out on your own, cant have that "funny" stuff now.
If your so "good" why are you asking questions here then?
Go find another hobby instead of p.......g off people.
I am only trying to help.
Believe me, I know a lot but not everything , even I have my shortcomings, after 15 yrs off pc usage and problem solving, but thats no reason to be rude!!!!!
Off topic:
Read me sig, before you get "funny" again, on this moment my fuse is very short and believe me, going funny on me your not going to win!!!!!
Sorry mods, cant take this c... right now and ive always been a good help here but this i will not tolerate!!!!
So my apologies to the mods and to ..... with that ....... newbie !!!!!
Fill in the blanks yourself badnewcastle !!!!!

Similar Messages

HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

Help with P6N Diamond X-Fi drivers

Ok, even though we have a fair share of threads with problems with this on board sound, im sure some of you must have it working correct.
So if you do, please tell me which driver you are using for the X-Fi.
Im running Windows Vista 64bit UK and if I use the driver from the CD I get the problem with the microphone not working. (It says its connected when its not, and vice versa.)
When I use the driver downloaded from the support page I can use the microphone, but none of the fancy properties of the sound card.
I tried MSI's support and was told:
Dear Customer,
Please install driver patch for the sound card from ftp. (ftp.msi.com.tw)
Driver\Driver Patch 2.zip.
Thank you!
So, I downloaded the file, unpacked it, and have tried different ways of "installing" it. (Clicking on the exe does not seem to work, and copying the files into the filesystem where the installed driver is located did not help either.) Since it had no effect I'm completely clueless to what the idea is behind this patch. If anyone can figure it out I would very much like to hear about it.

Yes, none of the suggestions work.
The first suggestion: Don't use the front panel.
I have already disconnected the front panel completely.
The second suggestion refers to a "Headphone Detection tab" that, although mentioned in the Audio Console help file, does not show up on my computer.
I find it rather amusing that a top-of-the-line board, specially focusing on the on-board audio, does not have a working Vista audio driver.
The board is now almost one year old, and 10 months has passed since the Vista launch.
Whats even more amusing is that Creative, who put their name on the on-board audio, does not want to have anything to do with this on-board sound either.
Reading about all the other problems with the board and experiencing plenty of these problems myself.. perhaps its time to return it, and add myself to the list of people who don't care about this board....

FIND with MATCH OFFSET not working

Hi,
I have a statement:
FIND '/' IN <ls_data_package>-/bic/zbib_sysn MATCH OFFSET off2.
this works in all the case except for when <ls_data_package>-/bic/zbib_sysn = SSULTANA-VMC/.
(i.e. when /bic/zbib_sysn = USERID-VMC/, here SSULTANA is the user ID)
*In this case off2 = .
Value of sy-subrc is 0 after this statement is executed
Can some one please point out what I am doing wrong.
Thank you,
CD
Edited by: CSD . on Sep 26, 2008 9:53 PM

>FIND with MATCH OFFSET not working
Most unlikely. More likely is that it isn't doing what you think it should be doing. Or you're using it incorrectly!
I can't really follow what your problem is. I assume you mean that you are getting off2 with value 0, when /bic/zbib_sysn contains USERID-VMC/
Can you be a little clearer in what the issue is?
DATA: off2 TYPE i.
FIND '/' IN 'this string /' MATCH OFFSET off2.
WRITE: / sy-subrc, off2.
This little program returns 0 and 12
matt

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Serial number provided with download does not work, now what?

serial number provided with download does not work, now what?

Chrish29593217 you are welcome to contact our directly at Contact Customer Care. What Adobe software title are you facing difficulties with?

TS3297 i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

I have downloaded skype, but after synchronizing with itunes skype not working, why?

i have downloaded skype, but after synchronizing with itunes skype not working, why? when I was synchronizing I believe there was some message in itune saying software not backed up or somethin to that effect.

Thanks for your response.
However, I did not find any solution to my problem.
in my phone the skype application skype is not opening up, same is the caseiwth mobile voip. Both these applications were downloaded last night and it worked then, but not working now.
Thanks in advance for anyone willing to help. I am new to the iphone.

Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, send me ansver,please

Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.

Did your computer crash or did Firefox crash causing the loss of the bookmarks?
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help

This topic has been moved to AMD64 nVidia Based board.
MSI K8N SLi Platinum Duall Channel not work? Please help

Quote from: iggsy on 29-July-05, 06:03:49
Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
Mine does the same thing at the startup screen but not on cpuz...go figure. Just my 2 cents.

Sli-bridge incl with P6N Diamond??

Ive just orderd a new mobo, P6N Diamond. And was wondering if the SLI-bridge is incl in the box? I cant find anything about that. Mayby a stupid question here for all tech-heads.....sry for that

Quote from: flobelix on 16-October-07, 21:10:52
You don't need to. As it is a board with a sli chipset MSI has to add a bridge. The reminder doesn't pertain to the bridge. Any retail MSI board with sli chipset comes with a bridge, no matter the area where it is sold.
Because nVidia don't ship SLI bridges with their cards.

Windows lockup problems with P6N Diamond

MSI P6N Diamond nForce 680i SLI Socket 775 motherboard
Seagate ST3250410AS 250 GB SATA hard drive
LITEON LH-20A1L-06 20X SATA DVD Burner
EVGA e-GeForce 8800 GTS Superclocked PCI Express video card
OCZ OCZ2TA1000VX22GK PC2-8000 Titanium Alpha VX2 Dual Channel Memory (2 x 1GB)
Windows XP Pro SP2
I have been having lots of problems with Windows XP just locking up on me. It has happened 3 times now, and I am tiring of re-building my PC from scratch. Every time, it works for a while, and then, just locks up one day.
At this point, I've removed my partition, rebuilt it, reformatted and re-installed windows. I'm currently running the AMI v1.3 bios. I've loaded the latest nVidia drivers (9.53 driver package). I've loaded the latest graphic drivers from EVGA (169.02_XP32).
I've read lots of posts in various forums about issues with SATA settings on nVidia systems, but I can't seem to find a post that is clear about the best settings. They mentioned disabling command queuing, using/not using SiL drivers, etc. Can anyone offer any insight that might help me straighten out my system? I am close to tossing it out a window.

Not quite sure how to answer, but here is the dump from cpuz:
Chipset
Northbridge        NVIDIA nForce 680i SLI SPP rev. A2
Southbridge        NVIDIA nForce 680i SLI MCP rev. A2
Graphic Interface     PCI-Express
PCI-E Link Width     x16
PCI-E Max Link Width   x16
Memory Type       DDR2
Memory Size        2048 MBytes
Channels        Dual
Memory Frequency   400.1 MHz (2:3)
CAS#           4.0
RAS# to CAS#      4
RAS# Precharge      4
Cycle Time (tRAS)   15
Bank Cycle Time (tRC)   22
Command Rate      2T
Memory SPD
DIMM #1
General
Memory type      DDR2
Module format      Regular UDIMM
Manufacturer (ID)   OCZ (7F7F7F7FB0000000)
Size         1024 MBytes
Max bandwidth      PC2-6400 (400 MHz)
Part number      OCZ2TA1000VX21G
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Nominal Voltage      1.80 Volts
EPP         no
XMP         no
Timings table
Frequency (MHz)      270   333   400
CAS#           3.0     4.0 5.0
RAS# to CAS# delay   4   5   5
RAS# Precharge        4     5     5
TRAS           10 13 15
TRC           15 18 22
DIMM #2
General
Memory type      DDR2
Module format      Regular UDIMM
Manufacturer (ID)   OCZ (7F7F7F7FB0000000)
Size         1024 MBytes
Max bandwidth      PC2-6400 (400 MHz)
Part number      OCZ2TA1000VX21G
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Nominal Voltage      1.80 Volts
EPP         no
XMP         no
Timings table
Frequency (MHz)      270   333   400
CAS#           3.0     4.0     5.0
RAS# to CAS# delay   4   5   5
RAS# Precharge        4     5     5
TRAS           10     13     15
TRC           15 18 22

XSLT Mapping with Java class not working in Integration Repository

Hi,
I have an XSLT mapping program with Java enhancement and I was able to successfully tested it in Stylus Studio. However, when I imported the Java class and the xslt program in Enterprise Service Builder and tested it, my program does not compile.
Here is the error message: "Transformer Configuration Exception occurred when loading XSLT mapping_temp.xsl; details: Could not compile stylesheet".
My java program is in a zip file containing SOAPHeaderHandler.java and SOAPHeaderhandler.class. My Java has a package com.nga.xslt.
Here is the declaration of my Java class in the XSLT: xmlns:javamap="java:com.nga.xslt.SOAPHeaderHandler"
It seems that it could not read the java class. Can you please advice what is wrong?

Hi ,
select XMLTOOLKIT option in Operation mapping and execute it.
I am not sure we can call java program in XSLT Program,but alternative is copy the code and use it in XSLT mapping it self,that means your XSLT program will become with JAVA extensions.
then in Operation mapping level select SAPXMLTOOL kit option and execute it. i hope it will work. if it is not working then you have deploy some JAXP files on server,because the way execution of XSLT Mpaping program got changed,like when eve you executing XSLT with extnasions( if you are not using XMLTOOL kit option) then you have to use latest version of JAXP.JDK files.
Regards,
Raj

SLI with P6N Diamond not working.

Similar Messages

Maybe you are looking for