Slices get messed up when linking

Has anyone been having funny problems with slices when you
make links for them? Linking messes up the whole page and breaks
away all the other slices a bit. Yes, I realize they go back into
place after linking by clicking on the outside. They do rearrange
but are not connected by a couple of millimeters or less around all
edges. I checked the border settings and they are zeroed. Any
clues?

> Any clues?
First clue would be to validate the page - this sounds like
invalid HTML to
me....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"djprall" <[email protected]> wrote in
message
news:g8hvfv$9fu$[email protected]..
> Has anyone been having funny problems with slices when
you make links for
> them?
> Linking messes up the whole page and breaks away all the
other slices a
> bit.
> Yes, I realize they go back into place after linking by
clicking on the
> outside. They do rearrange but are not connected by a
couple of
> millimeters or
> less around all edges. I checked the border settings and
they are zeroed.
> Any
> clues?
>

Similar Messages

  • Getting "generic error" when linking clips.  Generic not a helpful word.

    Getting "generic error" when linking clips.  Generic not a helpful word.

    Zero information also does not allow anyone here try to help
    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • Why does my email address get messed up when people hit reply sending from Mac Mail 4.6

    Why does my email address get messed up when people hit reply sending from Mac Mail 4.6
    OSX 10.6.8

    I talked to our email provider and they say it has to do with the way thre recipients email address book has recorded the address. They say that they need to fix the address on their end.

  • Figures order gets messed up when converting from Word 2010 to Acrobat PDF

    Hi,
    Im wondering if someone can help me. I have a 10 page document in Word 2010 with many figures (rectangles and circles overlapping each other). The order of these figures are essential. I have triplechecked the order in Word with the correct figure marked as on top. But when I convert (by printing) to PDF the order of the figures gets messed up making a mess in the document.
    I have Acrobat 9.
    Could someone please help me with this?
    Many thanks!

    I solved this by taking the document with me to a computer with Word 2007 installed instead of 2010. I guess the problem lays in the fact as some of you mentioned that Acrobat 9 doesnt support Word 2010. Now I know why! This is a bummer though, upgrading to Acrobat X isnt exactly cheap and I dont want to downgrade Word as I really like some of the new features in it (as the screenclip option).
    Thanks for your answers!

  • File Links in PDF getting messed up when viewed in browser

    When we put a file link in a PDF (\\servername\sharename\directory\file.doc) and display that PDF in a browser, when we click on that link, it becomes http://webname/servername/sharename/directory/file.doc which does not work at all.
    I have tried the current versions of Reader 8 and 9, as well as an old copy of 6.1 in browsers ID6/7/8 and Firefox 3.5.
    Our web unit insists that it didn't used to do this.
    If I change the Reader option to not open inside the web browser, then clicking on the file link works fine. It's just when Reader opens up in the browser that we have this problem.
    Anyone else run into this? Our folks really like Reader inside of the browser.
    Thanks.

    This is a post for Adobe Acrobat, not Adobe Reader as it is a functionality issue with Acrobat.  It is peculiar, I am having the same problem when I save the file to a local Windows Home Server.
    I have a link called file://whsservername/foldername and it becomes file://whsservername/foldernamewherepdfislocated////whsservername/foldername which is totally convoluted.  I am trying to research a solution for this but if anyone else knows what settings to change in Acrobat that would be a great help to post.
    -markerline

  • My songs are getting messed up when i try to back them up to itunes

    ok this is making me mad!!! one of my songs when i backed it up on my computer messed it up and i can lesson to the whole song, now a song that i like to lesson to is now not downloading on my computer and i cant redownload it and in my itunes on my computer it says its downloading.

    Clean the dock connectors.
    Try different sync cables.

  • Colors get messed up when exporting to adobe pdf

    I am working on a book cover that is mostly black. I have an image that has a black background that i have placed on the cover, and then i created a box and filled it with black for the rest of the cover. When i convert to pdf there is a noticible difference between the black of the picture (darker) and the black of the filled in box (lighter, almost looks grey). If i export to a jpeg it is fine, the colors blend seamlessly. What is going on? How do i fix it?

    There is a lot that goes on with Blacks and exporting. First off, your image is probably photographic, or some sort of continuous tone raster image. If it is, and you are dealing with a naturally captured background, the black will have some variation from area to area, and it will have either R,G, and B components, or it will be a blend of the four CMYK channels. There's a good chance, from your description, that the black background you are placing it against is a frame filled with the [Black] color swatch, which is just 100% K ink without other components.
    Adding other inks with 100% K results in a darker black, possibly with a cast toward another color, but still a color you would call black. Themore additional inks you add, the darker that black becomes, and 100% k, when printed, looks like gray in comparison. You may also have your preferences set to deceive you. In the Appearance of Black section, make sure that you have Display All Blacks Accurately set to show you the difference on screen.
    When you export, colors can be preserved or converted to a destination profile. If you are converting RGB to CMYK, you will get a 4-color "rich black" equivalent. If you are converting to a different CMYK space than you have set for your working space, and you don't "preserve numbers," your 100% k will also convert to some four-color mix, but one that is lighter to simulate the single component black. If you convert to RGB, your blacks will convert to three-color RGB mixes.
    What this means is that unless your image has a "dead flat" color (i.e. an artificial background that you've added in compositing an image) and you fill your drawn background in ID withthe same color mix (and are using the same color space as the image for your working space), there is virtually no chance of getting a seamless transition from image to ID background.

  • My dock gets messed up when the display changes

    I have my dock on the left-hand side of my screen. At my desk, I keep my MacBook Pro closed, and I use an auxiliary screen. If I take my Mac to a meeting and then reconnect to the screen, the dock freaks out: The little "application open" ligts stay where they were, but the icons slip farther down the screen. Is there any way to get the display to refresh, so that the dock icons find their way home?

    Hi bigd2k10,
    First, force your iPod into disk mode, and connect it to your computer. See if it is recognized that way.
    If it isn't being recognized, then see these articles:
    iPod missing in "My Computer" or in iTunes for Windows
    iPod is recognized by Windows but not iTunes
    iTunes 7 doesn't recognize iPod
    If you can sucessfully get your iPod recognized in iTunes, then I would suggest that you try restoring your iPod. For info on restoring, see:
    Restoring iPod to factory settings
    If that doesn't help, then see if this post by Da Gopha helps:
    Da Gopha: iTunes displays a "corrupt file" error message
    -Kylene

  • I get no graphic when linking a website inside facebook

    <link rel="image_src" href="http://www.maxcommusa.com/images/logo1.png
    I put this inside the head of the main page but it only made the whole website left justified.
    Here is the main website http://www.maxcommusa.com
    Please help thanks! I absolutely LOVE muse.
    Anthony

    The Yahoo! Toolbar extension has been reported to cause this issue.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    You can keep an eye on this thread:
    *[[/forums/contributors/707748]]

  • ICal alert time with travel time messed up when synced with Android

    If an event has a travel time of 30 mins, and I set an alert to be 30 mins before I have to leave, it gets messed up when I sync with my Android phone.
    After that, the alert is 30 (travel) + 30 (before) = 60 mins before travel on iCal. Doesn't seem to be able to fix this

    I'm having the same problem too, but with my iPhone as synced over iCloud.
    iPhone 5 (8.3), OS X Yosemite (10.10.3)

  • On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found.  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

    On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found.  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
    I have to clear this everytime I boot up?

    With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

  • After installing an update Foxfire 5.0 I get this message when trying to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    I get this message when trying to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    Do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • When I put my Apple ID in to get apps it says I will receive an email with a link to verify my account I'm not getting the email or link

    When I put my Apple ID in to get apps it says I will receive an email with a link to verify my account I'm not getting the email or link. have iPhone 4

    Greetings Seahawks2014, 
    Thank you for contributing to the Apple Support Communities. 
    If you have not received a verification email from Apple, the tips in this article can help:
    If you didn't receive your verification or reset email - Apple Support
    Best Regards,
    Jeremy 

  • After downloading Adobe Reader 11.0.6 I get "plugin failure" when I try to open a video link. Fix?

    After downloading and installing Adope Reader 11.0.6 I get "plugin failure" when I try to open a video link or watch a program in an archive.  How can I fix this?

    My browser is Safari in Mac OS 10.9.2.  Don't know if they are Flash videos, but it sounds likely.

  • TS3989 I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later. "

    I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later."
    I was the one who set up the Photo Stream and sent the link to myself. I called Apple and they said I did everything right and the server must be temporarily down, but it has been the same for the better part of a day.

    None of the fixes above worked for me.  Continued getting the "try again" error message. 
    Tryed a bunch of things, such as going directly to icloud on Safari to open the mail message, no luck.
    Tryed the following;
    Went to iCloud and logged in via Safari, clicked on my account name in top right corner, selected "Advanced" on drop down menu, and selected "Reset Photo Stream".
    Turned off Photo Stream on all devices and iPhoto.
    Turned on Shared Photo Stream option on Mac iCloud preferences.
    Tried the "Join This Photo Stream" button in my Mac Mail app .me account again.
    Still got the error message.
    Forwarded the original mail message to a yahoo account, selected "Join this Photo Stream" in the yahoo account mail (still in my Mac Mail app), and lo and behold, iPhoto opened and displayed the photos. 
    Could be this would have worked right from the start.
    Oh yea, still get the "try again" message if I click on the Photo Stream button in my .me account.

Maybe you are looking for