Slicing and Dicing a RAW cut

Ok, this is a really basic question, but I dont see it addressed in the Adobe Premiere Classroom in a book
I used Capture (F5) to get all the RAW footage from the camera into one big file. I have already set clip markers at the beginning of all the takes. What is the best way to slice and dice the RAW footage into all the different takes that I can place in my sequence?
Sam

The best way is to load the clip in the Source Monitor, add in and out points of the first segment you want, then drag the image in the source monitor onto the timeline. Repeat.
You can create items in the Project Panel by dragging from the Source Monitor to the Project panel.
You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

Data slicing and dicing

Hi,
What is the difference between data slicing and data dicing?

Hi,
Slice and Dice
The ability to move between different combinations of dimensions when viewing data with an OLAP browser.
Multidimensional analysis tools organize the data in two primary ways: in multiple dimensions and in hierarchies.
Slicing and dicing refers to the ability to combine and re-combine the dimensions to see different slices of the information. Picture slicing a three-dimensional cube of information, in order to see what values are contained in the middle layer. Slicing and dicing a cube allows an end-user to do the same thing with multiple dimensions.
check if helps
http://help.sap.com/saphelp_nw2004s/helpdata/en/13/ddfb2be53611d3b7900000e82debc6/frameset.htm
Thanks
DST

USB cable on keyboard sliced and diced - can I buy new cable or ???

Apparently the sliding keyboard tray mounted on the underside of this desk has a VERY sharp roller or exposed screw... or something... because when I rolled it out, the USB cable connecting the keyboard to the computer was looped inside the track and something in there cut through the cable like had been cut with a razor blade. It wasn't even stuck in there, just rolled over it like a hot knife through butter. Is it possible to order a new cable, open up the keyboard and put it in there, or do I have to cough up for a whole new keyboard?
****. I knew I hated this ugly old desk. The keyboard is worth more than the stupid desk to be sure. Grrrrrr.
But, I digress. Has anyone replaced a keyboard cable? This nice aluminum keyboard is only 2 mos. old.

Ouch, nasty - did you by any chance use a credit card to buy the keyboard? AmEx and Visa will sometimes refund the purchase price.

Slicing and dicing with FW CS4?

Hi there,
I am having a few issues understanding FW CS4 and where it
fits in the market, but i think i am understanding it now and was
looking for some confirmation and advice.
Basically i have created my website in PS CS4 and i am ready
to slice and dice which i would normally do in PS but weather i am
missing something it appears that once i export to html and slices
i will need to edit the CSS and fine tune it i.e. Absolute
positioning, etc etc..
It appears FW CS4 supports more advanced slicing features ...
so i was wondering if i do the following, is this considered the
recommended way ??
Create my design etc in PS (due to it being quite advanced -
and i just don't see the same features in FW)
Import my PSD into FW CS4
Slice in FW and export after customising each DIV etc
I don't know if anyone can help me here????
Is this right? or should i still do my slicing in PS?? I
presume not as FW seems more powerful
FW also seems to support exporting to EXTERNAL css file...
I look forward to any info anyone can offer

IanJG wrote:
> Hi there,
>
> Thank you for your reply... Great..
>
> Ok ... you say build the HTML pages in dreamweaver.. but
FS CS4 will export
> the html for me with an external style sheet.... SO i
presume i need to fine
> tune it - in this case no?
>
> I presume FW CS4 uses absolute postioning etc??
>
> If i was not to export an html file and try and build an
html file with all my
> assets it would be a bit difficult, due to the number of
slices - no?
>
> So i would use the html that was exported to either fine
tune it or use it as
> reference etc
>
> I presume its better to have all images as "background"
images on a div etc,
> does FW CS4 take care of this?? if so how?? ...
otherwise i presume i just need
> to edit the css manually?
>
> Thanks again..
>
I agree with Linda regarding the creation of the design. If
there is
something in particular you are trying to do in PS and can't
find the
equivalent in FW, please let us know.
If you follow the guidelines in the tutorials below, FW will
generate a
relatively positioned layout, using floats. If objects
(slices, text or
rectangles) overlap, FW switches to Absolute Positioning.
If you are planning to use the CSS and images export in
Fireworks, I
strongly recommend you read the tutorials listed below.
Chances are,
yes, you will need to fine tune the CSS after exporting from
Fireworks.
>>> So i would use the html that was exported to
either fine tune it
or use it as reference etc
It could go either way, but I think you would have a better
chance using
the CSS generated from FW by installing the new CSS export
script (3rd link)
>>>I presume its better to have all images as
"background" images on a
div etc, does FW CS4 take care of this?? if so how?? ...
otherwise i
presume i just need to edit the css manually?
If the graphics are just cosmetic then yes, it's probably a
good idea to
set them as background images. FW has both foreground and
background
slices. You choose which you want from the Property
inspector. FW will
export them accordingly.
Basic intro:
http://www.adobe.com/designcenter/fireworks/articles/lrvid4238_fw.html
Detailed explanation:
http://www.adobe.com/devnet/fireworks/articles/export_css_images.html
Advanced, with an updated CSS export script:
http://www.adobe.com/devnet/fireworks/articles/standards_compliant_design.html
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

NSString slicing and dicing

I'm finding string processing very cumbersome in ObjC. For example, I have the NSMutableString *board set to "abcde" (or whatever) and I want to insert blanks between each letter. Here's what I've written:
    // Perl equivalent: $boardDisplay = join('_', split(//, $board));
    NSMutableString *boardDisplay; // temp buffer in which to build display string
    [boardDisplay setString:@""]; // init to empty string (necessary?)
    for (int i = 0; i < self.wordLength; ++i) { // one letter at a time
        [boardDisplay
            appendString:
                [NSString stringWithFormat:@"%C",[self.board characterAtIndex:1]]
        // Don't append a trailing '_'
        if (i < self.wordLength - 1 )
            [boardDisplay
                appendString:
                [NSString stringWithFormat:@"%C", (unichar) ' ']
    self.boardLabel.text = boardDisplay; // finally, move display text onto UI
Is there any easier way to do this? Assembler language, perhaps? :-)
Have I left out any memory management issues?

Chap Harrison wrote:
a lot of the stuff I do has always heavily involved text processing. NSString is clearly not cut out for that
I wouldn't go that far. There are an awful lot of methods you can call. Sometime you may have to think of things slightly differently than you did before. It may be a bit "wordy" but that will have no impact on the final performance. For example, you could probably separate each character in a string with a space by doing something with "enumerateSubstringsInRange:options:usingBlock:" Try this:
#include <Cocoa/Cocoa.h>
int main(void)
NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
NSMutableString * hello = [@"Hello World" mutableCopy];
[hello
    enumerateSubstringsInRange: NSMakeRange(0, [hello length])
    options: NSStringEnumerationByComposedCharacterSequences
    usingBlock:
      ^(NSString * substring,
        NSRange substringRange,
        NSRange enclosingRange,
        BOOL * stop)
        if(substringRange.location)
          [hello insertString: @" " atIndex: substringRange.location];
NSLog(@"'%@'", hello);
[pool drain];
return 0;
Are there any 3rd-party libraries that can be used with xcode/objc, akin to the C++ STL string class, that provide memory management for strings and a rich set of functions for string manipulation?
You can always use Objective-C++ and just use STL itself.
Having Perl 5 available for back-end "engines" would be wonderful! Has that happened yet?
You can always use PCRE or a number of more Cocoa-friendly regular expression libraries. Still, none of them approach Perl for ease of use.

Error in updating DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6)

When I tried to update DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6) in Adobe Photoshop I get the following errors in the error log:
DPS Desktop Tools CS6 32.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
Photoshop Camera Raw 8.7.1(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
I purchased Adobe Creative Suite with my Mac so I have an installed version. I have tried rebooting, but to no avail. When I search for help on the site, none of the help explanations fit (e.g., delete a folder that doesn't exist on my computer). I have a 27 inch iMac running OS X Yosemite version 10.10.1. Thanks.

Sscrase what specific error messages did you receive within the installation log files for the update? You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.

Hi I designed my website in Photoshop, sliced , and opened it in dreamweaver. I want a interactive s

Hi I designed my website in Photoshop, sliced , and opened it in dreamweaver. I want a interactive spry bar but when ever I try to insert it, I get gaps in my page.
Below is the complete code: http://www.coriemoment.com
<html>
<head>
<title>home</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF" leftmargin="auto" topmargin="auto" marginwidth="auto" marginheight="auto" margin:0;>

<table id="Table_01" width="1281" height="768" border="0" cellpadding="0" cellspacing="0">
          <tr>
                    <td colspan="6">
                              <img src="images/index_01.png" width="1280" height="220" alt=""></td>
                    <td>
                              <img src="images/spacer.gif" width="1" height="220" alt=""></td>
          </tr>
          <tr>
                    <td rowspan="4">
                              <img src="images/index_02.png" alt="" width="414" height="548"></td>
                    <td rowspan="3">
                              <object width="564" height="423"><param name="movie" value="http://www.youtube.com/v/XbuQiJ6Sv_M?hl=en_US&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/XbuQiJ6Sv_M?hl=en_US&version=3" type="application/x-shockwave-flash" width="564" height="423" allowscriptaccess="always" allowfullscreen="true"></embed></object></td>
                    <td colspan="3">
                              <img src="images/index_04.png" width="255" height="89" alt=""></td>
                    <td rowspan="4">
                              <img src="images/index_05.png" width="46" height="548" alt=""></td>
                    <td>
                              <img src="images/spacer.gif" width="1" height="89" alt=""></td>
          </tr>
          <tr>
                    <td rowspan="2">
                              <img src="images/video_03-07.png" width="1" height="336" alt=""></td>
                    <td rowspan="3">
                              <img src="images/index_07.png" width="34" height="459" alt=""></td>
                    <td>
                              <script src="http://widgets.twimg.com/j/2/widget.js"></script>
<script>
new TWTR.Widget({
version: 2,
type: 'search',
/*put your twitter id that people use to reply to you below. Mine is mhorning. If you only want to see the Tweets that you have Tweeted, then delete the part below that says- OR to:coriemoment */
search: 'from:coriemoment OR to:coriemoment',
   /*this is the duration in terms of seconds*/
interval: 30000,
   /*this is the title you want on your tweets*/
title: 'Corie Tweets',
subject: 'Send us your comments',
   /*setting width to 'auto' will adjust the width of your tweetbox to whatever is set on your div. You can change this to something like 500px if you want*/
width: 'auto',
height: 212,
theme: {
    shell: {
             /*this will change the background color of your tweetbox. It is currently yellow*/
            background: 'body p, body img, body embed, body object, body video{opacity:1 !important}',
      /*this will change the color of the text in your background*/
            color: 'fac935'
    tweets: {
             /*this will change the background color behind your tweets. It is currently white*/
            background: 'body p, body img, body embed, body object, body video{opacity:0.2 !important}',
       /*this will change the color of the text in your tweets. It is currently black*/
            color: '#000000',
       /*this will change the color of anything that is hyperlinked in your tweet. It is currently blue*/
            links: '#1985b5'
features: {
    scrollbar: false,
    loop: true,
    live: true,
    behavior: 'default'
}).render().start();
</script></td>
                    <td>
                              <img src="images/spacer.gif" width="1" height="302" alt=""></td>
          </tr>
          <tr>
                    <td rowspan="2">
                              <img src="images/index_09.png" width="220" height="157" alt=""></td>
                    <td>
                              <img src="images/spacer.gif" width="1" height="34" alt=""></td>
          </tr>
          <tr>
                    <td colspan="2">
                              <img src="images/index_10.png" width="566" height="123" alt=""></td>
                    <td>
                              <img src="images/spacer.gif" width="1" height="123" alt=""></td>
          </tr>
</table>

</body>
</html>

Very bad practice to just use image slices into your website.
Check out this tutorial to learn how to efficiently slice, dice and markup your design into an active HTML format - http://net.tutsplus.com/articles/news/slice-and-dice-that-psd/
Also, Spry - has been deprecated and is no longer officially supported by Adobe. http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Consider using a jQuery menu.
-Sudarshan

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

I am trying to play cafe world and the screen is cut off so i can not play

i am trying to play cafe world and the screen is cut off so i have half of a screen so how do i make it larger so i can play of i will have to go back to explorer

Please do the following:
* Update to Firefox 29 [[Update Firefox to the latest version]]
* [[Remove recent browsing, search and download history]]
Also, I strongly suggest updating to Windows 8.1 update 1 as plain old windows 8 is no longer secure or stable.

I can't be the only person who has this problem - when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that

I can't be the only person who has this problem with iCal- when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that.

Yeah that works, but, it involves a click on the event, a click on edit, a click on the date, keystrokes, plus, since you can't see the next month you have to have a calendar in front of you so as to put it to the right date. It's easier just to cut it and advance the month and paste it, once you are in the right month you can move it around helter skelter willy nilly no problems. Although now that you mention it I will try it, maybe it is easier than cut and paste as I don't really care about the date, as long as it gets moved into the right month I can drag it around all I want.

On OSX 10.5.8 and I can't cut & paste or click and drag, HELP!

Hi all,
Please help! I can no longer click and drag icons or cut and paste. I'm running OSX 10.5.8 on an '07 macbook, and I really do not want to loose everything, is there a solution??? At the same time I have had a little trouble with the net and downloading files.
Is there a fix?? I'm desparate

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?

I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?

Great tip Stephen!!
I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
Thanks for the tip. This question should be tagged as answered.

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?

I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg E

You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

Slicing and Dicing a RAW cut

Similar Messages

Maybe you are looking for