Slide cut off at top

I am doing a slide show project for class using PSE 13. I noticed one of the pictures is cut off a bit a the top of the slide when shown, why and what can I do ?

Sorry, Firefox 4 beta is not compatible with the T-Mobile myTouch 3G Slide.
For more details, and experimental (unoptimized) nightly build that might work with the myTouch, see: https://wiki.mozilla.org/Mobile/Platforms/Android

Similar Messages

  • Cut off the top and left sides of iFrame?

    I have a page I'd like to place as an iFrame in another page.
    Is it possible to move the framed page up and to the left so
    that the
    frame cuts off the top and left sides of the framed page?

    Jim,
    Thanks a TON!  That worked well.  It took me a bit longer to key it because the keyer didn't key out all of the color to black as well with the compound clip but I was able to make it happen.  Video is up and I appreciate the help!

  • HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.

    HI!  My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing.  Not sure what happened to the printer.  Came home one day and the printing wasn't the same.  Possibly the kids could have fiddled with it but no one is owning up to it.    Any solution to get the printer printing normal again?
    Thanks
    -L

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Safari 8 Cuts off the top of every web page

    Ok, so I'm looking for a solution or I want to know if other people are having the same problem so hopefully apple will fix it.
    As my title says, Safari 8 in Mac OS X Yosemite is cutting off the top of every web page while in full screen. Not just a few, every single one, and it only does it in full screen. It only started after I updated to Mac OS X 10.10.1, it was fine with the original release of 10.10. Any takers?
    Thanks,
    Chris

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • When starting maximized, tabs are cut off on top and show properly only upon restore/maximize

    When starting FF4 RC1 maximized, tabs ("tabs on top" mode) are cut off on top. To restore their normal display, you restore and maximize the window again.

    After a bit of searching: solved by disabling TooManyTabs 1.3.2 extension.

  • Why does my printer cut off the top of copies?cc=​us

    My printer cuts off the top of copies.  Is there some way to adjust the printing size at the top?

    gedwardc, what is the size that you are trying to scan? Is it a legal document or a normal letter sized document? Has it worked before, and this is a recent developement?
    I want you to do hard reset in the meantime, so unplug the machine from both the back of the unit and the wall outlet for thirty second, and then plug it back in.
    Let me know!

  • In IMovie my project view is fine until it is finalized and then images are getting partially cut off on top(people's heads etc) Is there something I can do?

    In IMovie my project view is fine until it is finalized and then images are getting partially cut off on top(people's heads etc) Is there something I can do?

    My issue turned out possibly being a larger problem. 
    All of a sudden the server is in a bad, bad way.  30 minutes to get booted to the login screen.  If I try to login I get beachballs for half a second at a time.  I type login/password, the screen refreshes and I'm back to the login screen.  I can't connect a keyboard/mouse directly to it, because it wants to do the keyboard recognition (I'm not using an Apple keyboard because they're all Bluetooth and I can't get in to do the Bluetooth sync).  I can't do Disk Utility, because I can't connect a keyboard to do the key shortcut.  I can't do Hardware Test, because I can't connect a keyboard to do the key shortcut.  Can't reinstall Snow Leopard Server, because in their infinite wisdom Apple has removed the optical drive, and even if I had the optical, it wouldn't do any good because I can't connect a keyboard to do the key shortcut that would allow me to boot from the DVD.
    I tried to do target disk override from Remote Desktop but it won't let me choose my other Mac's Remote Disc as a boot option.  It also continues to show the Server as "Offline" even though power is on and it's on the network.
    I would do my 2010 Air's USB drive - just to do a Disk Utility and see if it's a drive problem - but I can't tell the Server to boot from the USB stick.
    Tried using my iMac as a monitor, that worked for a while, now it just flashes and then goes back to the iMac.
    I'm thinking the logic board on this thing is about to die.  Which is unfortunate, since my company opted out of AppleCare for this piece of equipment, and the 1 year expired last month.  So...if the repair is going to end up being $800, they're going to have to pony up for a new server.

  • I'm using Big date theme but the numbers on the date is cut off on top.  I'm on iphoto 11 and OS 10.8.2.  anyone else having this issue??

    I'm using Big date theme but the numbers on the date is cut off on top.  I'm on iphoto 11 and OS 10.8.2.  anyone else having this issue??

    OK try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

  • Printing PDF's in Legal Size cuts off the top and bottom. How do I fix that

    When I am saving a document to a PDF under the print section. I don't seem to be able to get it to print a lgal size document properly. It cuts off the top and the bottom. I also have this problem when I print a legal document as well. any suggestions?
    Thanks

    It also has to be rotated correctly.
    Did either of these suggestions help?

  • Windows 8, Lightroom 5.6. When i enable filters to search. It cuts off the top 160  images. These images are NOT included in the search!!

    In Windows 8, Lightroom 5.6. The search/filter function cuts off the top 160+ images. These are NOT included in the search.
    Even when there are as little as 6 images it does not include the first 4 images.
    I found this when I was searching a particular ISO. It did not show in the metadata search. I knew there were over 60 images at that ISO.
    I tried a text search, it did not work either. The top 160+ images were left out.
    Also it renumbered the images. My image number was #163 but Lightroom said it was #1.
    In Windows 7 Enterprise, Lightroom 5.6 worked perfectly.

    We'll need more detail to figure out what's going on. While we could play twenty questions, the most efficient way to troubleshoot this is to start out by posting a full-resolution screen shot of your LR window.

  • Descktop J4550 Some font lines are cut off at top half of row

    The subject line above says it all. Just need to know how to correct the problem. Descktop J4550 Some font lines are cut off at top half of row

    My personal opinion is that it is a problem from some books that have been published via Smashwords. That has been my experience for one or two books I've downloaded. I contacted the author in one case and he replied:
    "Just to let you know I've had some feedback from Smashwords about the odd display issue. It's relates to the line spacing in the original document, apparently. I'll be uploading a fixed version to them in the near future, though it might take a while for the new version to trickle down to the iBookstore."
    So I dunno if your book is published by Smashwords, but if it is it may be worth contacting author?

  • LG Flatron L245WP-BN monitor is cut off at top and has a black border at the bottom of the screen

    LG Flatron L245WP-BN monitor is cut off at top and has a black border at the bottom of the screen. Connected to HP Pavillion laptop via an HDMI cable. Is there any way to align the monitor so the full screen is showing?
    Please help!!
    Thanks
    This question was solved.
    View Solution.

    navers wrote:
    Sorry! It is an HP Pavilion 15 Notebook PC. I can give you the product number if you want? Running on Windows 8.1 64-bit
    Thank you for the additional information.
    Yes, the product number would be helpful.  Please don't provide the Serial #, however.
    I believe your problem may be that the monitor is not compatible with Win 8.1.  The only updates that are available are for Win XP and Vista.  You can find this information in the link that I provided under the section titled "Software Update".
    I suggest contacting LG Customer Service to see if they can help you.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Has anyone cut off the top "Handles" to make case shorter?

    I am considering placing a Mac Pro under a desk with limited vertical clearance- has anyone modified the case by cutting of the top handles to make the unit smaller vertically? Assume this would void all warranties..

    Kenneth are you crazy bonkers? If you really have to why not pop down to your local Ikea store and purchase a cheap and cheerful desk that will hold the Mac Pro instead of putting the angle grinder to your computer? Or better still get some MDF from your local DIY store and make your desk a little bit taller? Surely that would be easier and safer than undertaking sheet metal work? Only joking.
    On a serious note, I would also imagine that vibration and/or heat generated by cutting off the handles would risk the delicate internals of the computer.
    By all means why not cut them off, especially if the desk is an antique or worth more than the computer.
    Message was edited by: sam1974

  • Q5 screen cuts off at top and left side

    I've had my Q5 for a week. Today I noticed the screen is cutting off on the top and the left side.
    Does anyone have any idea how I can fix this?

    Hi and Welcome to the Community!
    Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Printing a multipage spreadsheet is cutting off the top of each page.

    I am trying to print a multipage spreadsheet in numbers that I have been using for a couple of years with no problems. Since converting to Numbers 3.1 and upgrading the spreadsheet to this new format I cannot get the spreadsheet to print properly. The top row of every page of the 20 page spreadsheet get cut off by about 75% making all the information in that row unreadable. I have tried the fit to page function, I have tried reducing the size but nothing works. Any ideas?

    Hi Denois,
    A couple of tips to help with layout now that Print View is reduced to the non-editable Print Preview.
    Numbers > Preferences > Rulers > Tick every box
    View > Show Rulers
    You can drag Alignment Guides from the rulers too.
    The rulers show the borders of the printed page a 0,0 (but they don't print).
    Regards,
    Ian

Maybe you are looking for

  • Hiding the '+' sign in cells

    Hi, can anyone tell me how to hide the annoying Plus signs that appear in Pages table cells when you put data in them? Apart from making the information impossible to read, I can't see much use for them - what are they actually for? Thanks, The Truss

  • Duplicated POST to XML from Safari browser

    In Safari 3.1.1 for Windows POST to XML is duplicated by browser. Seemingly this happens due to some server's response. (POST from other browsers is not duplicated, and in Safari browser POST from a page that is built on server tags is not duplicated

  • Table maintenance generator with radiobuttons

    Hello, how can I automatically (via se11: table maintenance generator) generate from a DDIC-structure the radiobtton-fields on a dynpro? If I use the domaine 'X' or 'XFELD', I only get checkboxes.... kind regards

  • Portal Eventing between Web DynPro Java iView and non-Web DynPro iView

    Dear Experts, I have 1 Web DynPro Java iView and 1 non-Web DynPro (using JSPDynPage and JSP) iView, both attached to a page. When Web DynPro Java iView fire a portal raise event, the portal iView did not execute the javascript function tied to the ev

  • How does bottom stack work? dwm-sprinkles[solved]

    Working my way through all the sprinkles by looking at the config.h ... I want this bstack (TTT) +-----------------+ | | | | | | +-----+-----+-----+ | | | | | | | | +-----+-----+-----+ like it shows on the patch's page, but i get... I'm not even sure