Slide deck alongside video in a webcast

Hi there, what would be the best and most reliable way to use Flash to crate "PowerPoint" slideshows to run along a video in a webpage. i.e. a webcast with video and slides for the viewer, and a control page for the slide deck? Most webcasts have the video in h264 and the slides are flv.
Is Flash or the .flv the best and most efficient way to get slides synced up in a live webcast - pre loading and conversion will be essential here I guess.
Message was edited by: Edwin Kunze

Not so much. You can do the "powerpoint with a speaker" thing with most of the big conferencing tools - Adobe Connect / WebEx / Hangouts / etc. You could also just do a live stream with Adobe Flash Media Live Encoder (it's free), and just switch input sources between the speaker and the slides. Again, you'd just use a machine with powerpoint / keynote or whatever as the input source.

Similar Messages

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.

If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

How do I create a slideshow or slider of youtube videos?

Hey folks, I can create slideshows or sliders all day, bur a slideshow or slider of youtube videos is kicking my %#&! Any assistance or directions would be greatly appreciated and would help me keep my job:-)

Thanks for the email tip.
I like fancybox. I'm going to use it for some other things. Attached is a sample image of what I'm trying to accomplish. Where you see the image on the right side, I want that to be a slide show of youtube videos that can be clicked and viewed. Each video would pause for about 4-5 seconds and cycle on to the next.
Can fancybox do that?
Johnny Jones

What happened to linking to other slide decks in Keynote 6.0

It appears that another bit of simple technology was removed from Keynote 6.0 - linking to other slide decks! This is a key advantage that PowerPoint has had. I really was hoping the same functionality would have been incorportated into the new Keynote. Now it appears one can only create links to other slides within the deck, a website, or email. Definitiely some key customization functionality has been removed. Not good.

Lots of other features gone:
https://discussions.apple.com/thread/5472161?tstart=0
Please add any others you find to that list.

Best practise for pausing slide during flash video playback

Hi all,
There really should be a simple option for this - apologies if there is, but I am struggling to find it!
I have some videos as part of my presentation, that I DO NOT want the user to skip! I am trying to implement a "Continue to next slide" button that only appears once the video is complete. I have experimented with several things. Most recently, setting the button to appear at the time in the slide when the video completes, which is OK, unless the user pauses the video :-). Then of course, the slide continues playing and the button appears!!
Is there an easier work around? I have also tried placing the FLV in an animation and programming the continue buttons manually, so that they only appear at the end of the video, this works to an extent, but not really what I am looking for as I feel it should be possible to do this without using an animation!
Im sure someone here has come accross this problem. I just wish there was a simple option to display button upon movie complete!!!!
Thanks,
Tristan

Checking Console.app messages once again, the following lines seem to coincide with at least some of the stalling incidents:
===
2013/03/05 1:32:33.231 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986b3c1340 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:32:34.499 am Dock[590]: no information back from LS about running process
2013/03/05 1:34:58.597 am Safari[8023]: PlotISImageRef 0x20990018 InContext 0x7ffb9b9d6ea0 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:35:00.853 am Dock[590]: no information back from LS about running process
2013/03/05 1:35:39.917 am TextEdit[8026]: PlotISImageRef 0x25910017 InContext 0x7f8873a45940 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:35:41.186 am Dock[590]: no information back from LS about running process
2013/03/05 1:42:14.318 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986c064400 in {33.000000,514.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:42:15.986 am Dock[590]: no information back from LS about running process
===
Any significance to this? Thanks for any help.
- Gord

On Page Slider of Embedded Videos

I wanted to make a single page that stayed the same but in the middle had a video embedded but I wanted to add left and right arrows to slide between embedded videos on that page. This would allow my homepage to have all the videos cleanly accessible without reloading the entire page just sliding between. Is this possible? Could I create a page that's long and has all the videos then embed that page onto the main page? How's this possible? Thank you!

Hi
You can try compositions , where insert the video in target and use triggers as thumbnails for more videos . User can click on the triggers to change the video.
Also you can use next and previous buttons which would change the target on selection.
Thanks,
Sanjit

Can you skip a slide during a video?

I work in radio sales and I am putting together a presentation that has music videos imbedded in it. After the video is over, the slide automatically advances to the next one. I want to be able to advance to the next slide during a video in case my client is in a hurry or has no interest in watching the video. I've tried using the keyboard shortcut [shift-down arrow] to advance the slide and skip the rest of the video while it's playing, but that doesn't work. Does anybody know if there is there a way to do this?

Only as a movie file.
Select Album. File > New Slideshow
Select Export on the bottom
Select a size and export.

Multi-Slide Synchronized .f4v videos looping 3 times on mobile device

I created an elearning project in captivate 8.01 which includes several slides with .f4v videos as multi-slide synchronized videos. Each of these videos spans only one slide. I published this course to our LMS (Cornerstone OnDemand Learning Cloud) in HTML5 and SWF to accommodate desktop and mobile learners. I used the SCORM 2004 1.3 standard. The project plays as expected on a desktop PC, progressing from slide to slide after each video is played (note I tried this both with HTML5 and SWF output, and it worked fine on the desktop). However, when viewing this course on a mobile device (my tablet is an Android 4.4.2), each of the slides with a video loops three times before progressing to the next slide. I tried putting the slide action "On Exit: Go to next slide" on these slides with videos to force the project to progress, but with no success. How can I ensure that these videos play only once then progress to the next slide on a mobile device?

No controllers showing here either. Controllers show and work in preview mode, but when publishing to Html5 then playing on Ipad, video in slide plays once, but now controls visible...can't pause. stop or rewind...
Dave

How do I Update PowerPoint 2013 Slide Deck Preview Thumbnail?

I often copy previous presentations and revamp them for my next presentation. I notice that after changing the title slide in PowerPoint 2013 the embedded thumbnail.jpeg file is not updated. Ordinarily I would not care, but recently I am presenting to two
competing comanies and I cannot have the branding for one company on the presentation for another.
Short of completely recreating the deck, is there a way to force the update of the thumbnail.jpeg file in the PPTX?
Thanks!
Matthew
Matthew McDermott, MVP SharePoint

OK, I discovered that You can go to Backstage and chose Properties | Advanced Properties | Summary | Save preview with picture. Uncheck and save then recheck and save and PowerPoint will refresh the thumbnail...unless it doesn't. Which was true for half
of my decks.
For those I:
Renamed the file to zip
Deleted the thumbnail.
Renamed the file back to PPTX
Opened in PowerPoint.
Let PowerPoint perform the repair.
Toggle the preview setting as above
HTH,
Matthew
Matthew McDermott, MVP SharePoint

Slow exporting slide show as video. 4 days less than 10%

I am exporting a timelapse of 1900 Small Raw slide show images as video. It can run for 4 days and not much seems to happen. I had done 1500 images in less than an hour before and they were larger files. What can I do?

I am exporting a timelapse of 1900 Small Raw slide show images as video. It can run for 4 days and not much seems to happen. I had done 1500 images in less than an hour before and they were larger files. What can I do?

Trying to overlay photo slide show over video

Hi, I'm relatively new to iMovie but couldn't seem to work this one out myself.
I've have video of myself talking, and without disrupting the audio track, I would like to overlay a photo slide show of still images over part of my dialog, but can't figure out how to do this. Ideally, the video would fade out/fade in to the photo slide show, but the audio track would remain constant, and then when the photo slide show is completed, fade out/fade in to the straight video again.
Anyone know how to do this?
Thanks!

Select the clip with the audio and use Clip>Detach Audio. You have to put the stills on the main video track because you can't add transition to stills or clips on the overlay or B-roll track. Once the audio is separated you can replace the picture with stills and start building your slideshow on the video track.

How do i automatically start the next slide after the video on the prevues slide is finished

I have slide 1 with a video loop witch tranistion to the next on a click. the next slide (slide2) automaticlly starts plays. I want to know how to start Slide 3 automaticlly after the video on slide 2 is done playing. Slide 3 is also on a loop. and start slide 4 on a click. then repeats......

I once had the same problem, but it was worse because the length of the video was more than the maximum delay that could be set (Keynote'08, I do not know if this changed in '09). I was helped by someone of this community. She suggested adding invisible text fields, each having a delay, sequenced one after the other. Together they added up to a sufficient delay to play my video and go to the next slide after that. I hope this information will be of use, if need arises.

Can't adjust audio slider when viewing video

I just got the January update a couple of days ago. When viewing movie I cannot change the audio level using the slider. I can still move the video forward/back slider and the pause/play button. Can someone help?

It now seems I'm having problems with any icon or control on the very leftmost side of the screen. It can several touches to get any thing to respond. Anyone heard of any defects like this?

How to convert slide shows from Video CD to DVD format

I have a number of Adobe Photoshop Elements slide shows in the Video CD format. Since many DVD players (especially blue-ray) do not accomodate the Video CD format........... I would like to convert them to DVD. This will not improve the resolution but will take care of my problem. I do have Adobe 9.0 Photoshop and Premier Elements. Suggestions appreciated.

Even though Photoshop Elements gives you the option of burning a CD or
DVD.........in reality I don't think you can do a DVD unless you have Photoshop
Premier.
Keith
In a message dated 7/13/2011 11:49:46 A.M. Central Daylight Time,
[email protected] writes:
Barbara, I am having the same problem. I still can't burn DVD of a
slideshow from Photoshop Elements. I have tried writing it in WMV format
and saving it to my pictures file, it gets converted to PDF format. I
think that is becasue it is getting opened by Adobe flashplayer.
I also can't send a thread regarding this problem with out attaching to
another thread.
Nancy

Dual screen help, slide show and video playback at one time possible?

Hello, i am currently working on a video and photo slide show to promote at a trade show we will be attending on thursday and friday, i have a mac pro with a single 8800gt video card, is there any way possible to show the slide show on one screen using iphoto, and then on the other screen play the video using quicktime?
Any and all help is greatly appreciated!

nevermind, after playing with it a while i figured it out, i just created an album in iphoto and set the desktop background to cycle through the photos every 5 seconds.

Slide deck alongside video in a webcast

Similar Messages

Maybe you are looking for