Slide display

how do I show a slide projector display from my macbook pro

Not sure what you're asking.
A new PPT presentation defaults to 720x540. A couple of Keynote presentation defaults are 800x600 and 1024x768 (if memory serves, an AppleWorks presentation in Keynote opens to 720x540). In the case of new presentations, optional startup pixel dimensions can be set pretty much at your discretion. Whatever specific values you choose, they will fill the screen (as long as you've chosen dimensions with an appropriate aspect ratio) when the presentation is projected.

Similar Messages

  • How do you change Slide Display time

    I have a slide which has a 30 sec display time.  I want to change it to 6 secs.  So I go to slide propteries and change display time to 6.  I click OK but it make no difference.  When I look at the properties again, the time is set back to 30 secs !
    How do i change the slide display time?

    Thank you.  That has solved a number of my problems.  The time line does not appear by default on a new installation.  In fact it was quite tricky to get it visible but it is now.

  • Slide display stuck to left.. can it be changed?

    Hello, I'm a new user of Keynote '09 (actually new to mac) and I found that slide display in canvas is stuck to the upper left corner. Do you know if the display can be changed? I haven't found a way to do this, and I'm suspecting this is the way it is supposed to be?
    Thanks for your help and/or info

    Thanks for your help,,, as I imagine we will have to wait for iworks10.. or is there any chance they can fix this with iworks09-upgrade? (if does exist cause I find some terms really new to me: bugs, fix, prices, etc.. ahahah

  • Slide 'Display Time' Question

    I am new to CP and am using version 4.  In designing my first project, I've noticed i need to set a slide 'display time' in the Slide Properties option box.  I have slides that I'd rather my users complete at their own pace then click on a NEXT button to proceed.  Is there any place where I can opt out of putting in a slide display time?

    Hi there
    No need to worry with Slide timing. All you need to do is insert a button with a label of "Next". By default, button objects will pause the slide until they have been clicked by the end user. The slide will wait indefinitely until clicked.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Is there a way to maintain synchronization of slide display and playhead position?

    Hi, I'm working with Captivate 5 and I'm trying to add some highlights to various features in a full motion recording (FMR).  Frustratingly, while I can preview the recording by dragging the playhead through the timeline, when I release the playhead, the display jumps back to the beginning of the FMR.  The playhead stays in its current position, but the slide shows me the start of the recording, not the image I'd been viewing moments before when dragging the playhead.
    Is there some way to force Captivate to display the actual image related to the current playhead position?  It's really frustrating to try to position highlights when I can't see where I'd like them to go.  :/
    Thanks in advance for any help.

    It's a workaround, but what I do is publish the movie, pause it at the point where everything is present on the slide that I want to highlight, take a screenshot using SnagIt, then add this screenshot to the movie slide where I have my FMV recording.  I place it at the top level but untick the Visible box in Properties for this image so that it won't show up at runtime.  I use this image to line up my highlight boxes and then just hide it on the Edit view of the slide so that it's not getting in the road.
    This only takes a couple of minutes to do and allows me to line up my highlight boxes perfectly, saving a lot of time.

  • 6500 slide display screen issues

    Hello, first post and first problem with my phone so far, i'm still trying to figure out whats wrong with it.
    I bought my slide from a cell phone vendor in Singapore, and thankfully i have insurance so if anything is unfixable my insurance will take care of it, but i haven't looked into what id have to do to get that done since im here in the us.
    My problem is this. Recently, my screen or display is starting to do some weird stuff. Sometimes the screen just goes all black, and i cant see anything on it, i can see that it is backlit, that there is at least power going there, but no picture, and sometimes, the normal image of the phone is seriously distorted, like someone switched the colors on a laptop display from 1 million to like 36 colors, not cool. While this is happening though, all the functions of the phone are operating, i can hear when i enter in numbers, and i can dial my voicemail, and im sure if i could remember the key sequence to say....play a mp3 i think i could do that as well. This seems to happen when i slide the phone out, but not always, sometimes the slide will be in, and it wont show anything, and then ill slide it out and nothing happens, so nothing concrete but this is happening. But it always consistently comes back at some point. sometimes ill just leave the phone slid in with the screen black, and eventually it will come back....
    When i had first got my phone, something similar to this had happened, but never for longer than a few seconds. A couple of times after i had been using a bluetooth stereo headset, i had switched off the headset, and then later wanted to reconnect it, but the phone for some reason had it still listed in actively connected bluetooth devices. So i would cycle bluetooth off and then on again. After turning blue tooth off, the phones screen would blank, as if it was restarting, and then i would wait a second, and then the normal stuff like icons and network and all that stuff would come back, like it was thinking real hard or something.
    I thought that it might be software related, i have some games on my phone, and maybe there were problems caused by them, or i thought it might be because i had been using a 6gb hcsd micro card in the phone. I had been using it in the phone for a while, with no issues whatsoever, but then this started happening, so i took it out and put in a 2gb micro sd card that i have as well.
    I just finished installing the latest phone software, and i had done this once before, when a new version came out, so now i have the newest phone software available. Now....after i did this successfully, i examined the phone again, slid it in and out, and the screen went blank a few times, then came back a few times. I decided to shut off the power and then turn it back on, and it seems, as if this is not happening any longer, though i think pessimistically that it might happen again.
    If anyone out there has experienced something similar or exactly like this, and has found a solution please let me know.
    I'm worried that it is hardware related, or permanent damage to whatever counts as a phones bios or firmware, but i cannot be sure.
    Any help or info is greatly appreciated,
    Thanks,
    Ian.

    Hi all.
    Thank you both for your input as far as my problem with the phone is concerned. I had done some reasearch on the problem, and due to the fact that i am in the United states, i decided to see if i could get the phone repaired here locally. I found a place that works specifically on nokia phones, and they looked at my phone and said that they thought that it needed a new flex cable and a new lcd screen.
    I was unable to find parts that i could buy singularly from any vendor, although i was able to find parts for my phone at a website called http://www.tessco.com/
    The people i brought the phone to said that my phone needed a new audiovisual flex assembly, and a new lcd screen, as tessco calls them here: look under flex assemblies. they do not sell lcd replacement screens apparently.
    http://www.tessco.com/products/bmd/listItemsForSel​ectedCategory.do?bmdTypeId=007_26&mfgName=007_26_N​...
    I could not buy my parts from tessco because they will only do batch orders of 125 or more for each part. So, i looked around on ebay, and found 2 auctions where i found an lcd screen, and an AV flex assembly for my phone.
    here are the auction links
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1​&item=120217680995&ssPageName=STRK:MEWN:IT&ih=002
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1​&item=110206704806&ssPageName=STRK:MEWN:IT&ih=001
    i purchased these two parts and the repair guys here locally said they looked good. They repaired my phone using them, and when it was done, apparently they said everything was fine.
    Shortly thereafter, i was using my phone, and the same problem keeps on happening. The screen is still going black intermittently, and it is driving me insane.
    What i am thinking is that something that i DIDNT replace is defective, but no one can seem to figure out what that is, or doesnt know.
    If anyone can contribute some info to my problem, please help.
    And thank you.
    Message Edited by sytheii on 23-Feb-2008 09:22 PM

  • Default Slide Display Time Won't Apply

    Hiya -
    Have a software demo deck that automatically recorded to 3s per slide, and I'd like to change the default display to 5s per slide.  When I change this in Edit/Preferences/Global/Defaults, it does not apply throughout the project.  Any ideas why?
    Thanks,
    Kimberly

    Hello again
    Well, for starters I'll need to know the following because my durn crystal ball is on the fritz and my remote viewing skills aren't up to par.
    What version of Captivate are you using?
    How did you record? (Demo, Assessment, Full Motion)?
    Can you provide a screen shot (using the camera icon in the forums web interface) that shows one of the offending slides' Timeline?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • I have connected my iPad 2 to an Infocus X1 projector using a 30 pin / VGA connection cord. The iPad displays the slide display mode only and does not permit slide show to be launched?

    I have connected my iPad 2 to an Infocus X1 projector using a 30 pin / VGA connector.  The iPad will not change from slide sorter mode to presentation mode. How do I change the iPad to 'slide show' and get the projector remote to respond to changing slides?

    The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.

  • How to achieve this photographic slide display/navigation

    Hi,
    I would like to know how to achieve the following:
    1. Go to
    http://www.corneliaadams.com/
    & then click on 'michael mundy' link. this opens up a page with
    a slideshow of photographs that i really love. I have very basic
    knowledge of scripting ,a nd i usually achieve my goals by
    modifying flas that i have seen or by following tutorials (as
    opposed to writing it myself). the great thng about the above
    version is taht the images slide to an exact position when you
    click on the forward or back arrows, and they slow down ever so
    slightly just before stopping. Can anyone point me in the right
    directoin with how to achieve this, or offer a tutorial. I am
    really starting from scratch, and would lik eto end up with the
    same clean and professional outcome.
    2. regarding the same above link, when you are at the main
    site, and then you click the michael mundy' link, what is it that
    happens, is it a new html popup page that opens of specified
    dimensions and the embedded swf is set to stretch to maximum
    width/height? or is it a lone swf that pops up (with no html page)?
    or is that impossible?
    Many Many Many thanks in advance,
    Cheska

    I hope there might be some simple way to do this and waiting for experts to reply.
    Try the below query.
    SQL> select * from random_numeral;
      NUMERALS
             1
             2
             3
             4
             5
             6
            56
            85
            24
            11
           120
      NUMERALS
           114
           100
           140
    14 rows selected.
    SQL> select a.numerals ||' / '||b.numerals||' / '||c.numerals from
      2          (select numerals,rownum rn1 from
      3          (
      4              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
      5              from random_numeral
      6          )
      7          where rn=1) a,
      8          (select numerals,rownum rn1 from
      9          (
    10              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
    11              from random_numeral
    12          )
    13          where rn=2) b,
    14          (select numerals,rownum rn1 from
    15          (
    16              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
    17              from random_numeral
    18          )
    19          where rn=0) c
    20  where   a.rn1=b.rn1(+)
    21  and b.rn1=c.rn1(+)
    22  /
    A.NUMERALS||'/'||B.NUMERALS||'/'||C.NUMERALS
    1 / 2 / 3
    4 / 5 / 6
    11 / 24 / 56
    85 / 100 / 114
    120 / 140 /
    SQL>Cheers,
    Mohana

  • Change all slides' display time en masse

    Greetings,
    Cp 5.5
    I've recoreded a training and assessment simulation where the slides' timing is set to 3 sec. Post-production: I want to change ALL of the slides' timing to 2 sec.
    I realize I should have done this in the Global Prefs Default prior to recording. Going in to the Prefs and trying to change the Slide Duration post-production does not work.
    Is there a way to do this without having to change each slide individually?
    Much Thanks!
    k

    No, I do not know about such a work flow, and also think it would probably cause a lot of issues. If you have interactive objects, changing the slide duration will change the active/inactive parts, if you have Effects the duration will be changed relatively, if you have audio, it will be cut off etc...
    Is there a particular reason why you want to do this? Perhaps to decrease a little bit the filesize? Most object default timeline will probably also be 3secs, to decrease the slide duration you'll first have to decrease the object timelines or to attach them to the end of the slide (CTRL-E). If there is no real staggering in objects this will be the fastest way (but still slide/slide:
    look for an object of each style/type, and set its timeline to 2sec, than you can use the small curved arrow in the top right of the Timing accordion to apply to all objects of that style/type
    then slide/slide select the slide timeline and use the shortcut SHIFT-CTRL-LEFT to decrease the length with 1sec
    Lilybiri

  • Cannot maintain PowerPoint slide display through projector

    When I am using PowerPoint (Office 2011 suite via Office 365) through a projector, the screen frequently looses the PowerPoint slide and reverts to the image of my desktop.  I am constantly forced to reclick on my PowerPoint to get the presentation to reappear -- full screen -- using a projector.  Any suggestions?

    When you bring up the monitors control panel, does it show on BOTH screens (internal and projector)? It should, and if you're not mirroring, ONLY change it on the projector. Make sure it matches the default for the projector. There no reason it shouldn't work, but that's the first place to check.

  • Captivate 3 Inserted swf animations play fine but display on slide as very small

    Using Captivate 3 build 589.
    Opening an existing cp file. Each slide has a swf file on it, and an audio clip.
    When I select a slide to edit it, the animation no longer appears as taking up the entire slide size of 800 x 600.
    I need to add some highlight boxes on top of the animation, but because the slide displays the animation as very small, it's just a guessing game.
    This didn't used to happen when I opened this project file--six months ago.
    By the way, it publishes just fine--animation is correct size.
    It's an 800x600 animation to begin with.
    Any answers?

    Thanks Rick. Yep, that last item on the list was the source of the problem.
    You might want to revise your description. Users no longer have to go back to an older version of Flash Player. The newest version has the fix in it now.
    Users are advised to first uninstall Flash Player using the Adobe-provided uninstall_flash_player.exe.  Get it at http://kb2.adobe.com/cps/141/tn_14157.html.
    Close all other windows before running uninstall_flash_player.exe.
    When it is complete, restart your computer. Then when you first open Captivate, you are redirected to http://get.adobe.com/flashplayer/ to download the latest Flash Player. The version that fixed the issue for me is 10.1.82.76.
    Rick's my hero. I know I had heard about what caused this problem--but I couldn't remember what it was!
    Thanks again!!

  • Question Not Displaying on Slide

    I have a Cap 2 module that I have converted to Cap 3 and
    applied a new dark background to (I pasted the new background and
    Meged into background on all the slides). I then double clicked on
    the questions and answers and changed the font color to white.
    When I preview the module, the first question slide displays
    correctly. The next 4 question slides display only the answers --
    it's like the question does not exist -- when I publish and run or
    even preview the slides. I can see the text when I edit the slides.
    I have compared all the question slide options -- they seem
    identical.
    Any ideas of what I can do to get the question text to appear
    on the slides?

    Hi there pshuckhart
    Just a thought here. Sometimes I know the color assigned to
    objects plays a role. Perhaps try selecting the text and applying a
    specific color to the text. For example, lets say you wanted the
    text to be black. Instead of selecting pure black (#000000) choose
    a very slight variant (#010101).
    Might be worth trying... Rick

  • Editing Display Time for Slides

    Hello! I'm fairly new to Adobe Captivate and am using version 5.5. I am having trouble changing the display time for some of my slides (Captivate won't let me adjust display time from 4 seconds to 2 seconds), but I can adjust other slides with similar animations with no problems. Does anyone know what could be causing this issue? Thank you!

    Hi There,
    Can you check your time if you have any image or any object set to rest of the slide, then you need to first change it back to 2 seconds and then change the slide display from 4 to 2 seconds.
    Hope this helps.
    Thanks
    Priyank

  • Slide presentation display

    Hi, When I hit play on my presentation, all that appears on the screen is s small version of the slide off to the left of the screen with the slide number over it. I have tried everything I can think of to change it..but can't. I also can find nothing in the user manual about it. How do I get it back to one full slide on the screen when I hit play.

    If you are using two video outputs, you may be looking at a version of the presenter view. Check the slideshow preferences and see if you are using the primary or secondary display to view your slides. Another thing you can try after you hit play is to hit the x key. this toggles between the slide displaying on the primary or secondary screen. also check that mirroring is off in your system display preferences.

Maybe you are looking for