Slide down menu/quick setting menu crashing

My Quick setting slide down menu thing at the top keeps crashing. It appears over the top of other things I'm doing on the phoneand stops me pressing anything near the top of the screen it kind of half slides down and shoots back up it won't stay down to even press clear notifications, even the back button won't function when its playing up. 
Sometimes it goes nuts and flashes on and off turning the sound & wifi on and off.
It locks the whole phone up and won't let me turn it off and on with out restarting.
Is there any way to get rid of this slide down menu or solve the problem?

Just sent a message to another member about this
My Z1 sometimes does this and I've tested with and without screen protectors - My theory is that it does this when the screen is full of finger marks/smudges and for some reason it must be registering these marks as touches - If I keep my screen clean it doesn't happen
I also have to hold power and volume up to restart my device
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • Slide down menu not sliding up

    I created a slide down menu and for the most part it works when you click on each link, but for some reason, it hangs if you have one link expanded and you click on another link:
    http://www.christinakajtsa.com/red-nav.swf
    I used an old .fla file and it worked fine but when I added an extra category to it, the menu went all crazy. I'm not sure how to fix it. Help!
    I have buttons set up which call on frame names:
    on (release) {
        if (_global.state == "e") {
            _parent.gotoAndPlay("eclose");
            _parent.c.gotoAndPlay(1);
            if (_global.state == "f") {
            _parent.gotoAndPlay("fclose");
            _parent.E.gotoAndPlay(1);
        if (_global.state == "a") {
            _parent.gotoAndPlay("aclose");
            _parent.E.gotoAndPlay(1);
        _global.state = "c";
        _parent.gotoAndPlay("copen");
        _parent._parent.section.gotoAndPlay("two");
        play();

    It's pretty difficult to tell what might be wrong without seeing the actual file. From your example, I'm guessing that each item in the menu is animated in its own layer, and that you have sections of the timeline that will animate each item open. You are telling one item to animate closed and then telling another item to animate open. The problem could be with the parent child relationships, or with the naming of the movieClips, or something else entirely.

  • How to make slide down menu?

    How to make such slide down menu like on the page: [categories in Whohas directory|http://www.whohas.com/]? Press on "[+] WHoHas DIrectory".
    I can't find anything in code...

    This is a Java forum. What you want is a JavaScript forum. I know it is a bit confusing but I thought the missing Script bit would have been a dead give away.

  • Back,home n app drag button,slide down menu vanishing problem

    M Fed up of dis phone.!!only 1yr n 4m has gone,n its bothering me continuesly..
    2 Times it happend...
    Diff kind of bugs came, "your settings has been stopped" "your contacts has been stopped" n diff bugs for all apps..
    I contacted cust. Cre,n did software repait 2 Times,now s diff m weird problm has started
    Back,home,n d 3rd button and d slide down menu vanishes automatically.. It doesnt come back..!!I have to restart my phone 2-3 Times,n den after also same problm,within 30-40 min. Of usage,it starts again..m Fed of dis...sonyz brand!!
    .please advice me..

     The problem could be that this phone has only 1GB of RAM, apps are getting heavier and heavier, Android will free up some needed RAM by closing certain apps and/or services, that could be the issue here. 

  • How to set up slider mobile menu widget on master and pages of mobile website in Muse

    Adobe Muse Slider Mobile Menu Widget by MuseThemes
    I am new to mobile website design and Muse, I love this widget, but I am not sure how to set it up on multiple pages.
    Do I put it on the master? Content covers it when it is on master, so I could use some help.
    Thanks so much, anyone know of tutorials or can anyone give me a game plan to set up. thanks so very much!

    Thanks, my issue was that the content was in front of the navigation menu see screen shot (taken in preview in Muse)

  • TS3276 the images (attachments) are automatically resized (smaller) when I send them to a customer. My email screen does not show a drop down menu box where you can leave as actual size. Is there a setting elsewhere that can be set.

    Any suggestions on problem I have. I receive images, say a file that is 3 mgs through email on Safari mail and when I try to resend it or forward it or any other larger file, when it sends the file is reduced by about 1/3. My screen does not show and drop down menu with a feature to keep actual size or reduce that is suggested when I looked up solutions to the problem.  I can't find a setting anywhere in mail that I can change to make sure my files are kept at actual size. I figure a setting got changed -don't know how - but it happened about a month ago. Caused problems as I work in graphics can't send files to clients as they come out too small. Any suggestions on how to fix.
    Thanks

    What email program are you using? And what do you mean by "Safari mail"?

  • Form2mail how do I set up the form to sent to a recipient selected from a drop-down menu?

    I am trying to configure dreamweaver form2mail to be able to send the information submitted to individual employees.  I would like the form to be set up where as you choose the recipient form a drop down menu and the only that recipient would receive the information collected on the form.  I can't seem to find any information on this.  I can only find info on sending to multiple recipients at the same time.  I only want the recipient that is selected to receive the form information.
    Alternatively, can anyone recommend a low cost or FREE form to mail system.
    Thanks in advance for your assistance!

    Jim, That is exactly what I need.  I'm using Form2Mail the Dreamweaver extension for Adobe Dreamweaver.  It only gives me the option to send to one email address or cc to multiple not individual sends.
    Here is the html
    <form action="/HDWForm2Mail/Form2Mail.php" method="post" enctype="multipart/form-data" name="form1" id="form1" accept-charset="iso-8859-1">
            <p>
              <label for="message"></label>
              <textarea name="message2" id="message" cols="50" rows="5"></textarea>
            </p>
            <table width="429">
              <tr>
                <td><strong>Recipient:</strong></td>
                <td><label for="recipient"></label>
                  <select name="recipient" id="recipient">
                    <option value="[email protected]">Mr. Person 1</option>
                    <option value="[email protected]">Mr. Person 2</option>
                    <option value="[email protected]">Mr. Person 3</option>
                  </select></td>
              </tr>
              <tr>
                <td><strong>Your Email Address:</strong></td>
                <td><label for="email"></label>
                  <input type="text" name="email" id="email" /></td>
              </tr>
              <tr>
                <td><strong>Attachment:</strong></td>
                <td><label for="file"></label>
                  <input type="file" name="file" id="file" /></td>
              </tr>
              <tr>
                <td colspan="2"><strong>To Submit your email, click the SEND button:
                  <input name="send" type="submit" id="send" onclick="MM_validateForm('email','','RisEmail','message','','R');return document.MM_returnValue" value="Send" />
                </strong></td>
              </tr>
            </table>
            <input type="hidden" name="hdwemail" id="hdwemail" value="lisa+email.com" />
            <input type="hidden" name="hdwok" id="hdwok" value="http://ricochec.com/thank-you.html" />
            <input type="hidden" name="hdwnook" id="hdwnook" value="http://ricoche.com/error.html" />
          </form>

  • In System Preferences,  and CDs &DVDs, I've set the drop-down menu for audio CDs to open iTunes. can anyone tell me why it always reverts to Ignore?

    Can anyone help me figure out why the setting in System Preferences and CDs & DVDs will always revert to Ignore when I set the drop-down menu to When you insert a music CD, to Open ITunes? I've tried iTunes Help and it told me exactly what I have been doing. I've even tried downloading iTunes again, to no avail. If anyone has had the same problem, please let me know. I would very much appreciate it.

    In iTunes Preferences not system preferences under the General Tab there is a drop down in the lower part letting you specify what action to take when a CD is inserted
    Show CD
    Begin Playing
    Ask To Import
    Import CD
    Import and Eject
    I believe this setting adds to the system preferences
    In system Preferences I have

  • Illustrator CS4 crashes when using save drop down menu on MacBook Pro Yosemite

    Illustrator CS4 crashes when using save drop down menu on MacBook Pro Yosemite. Just purchased a new laptop and it has Yosemite installed.

    Hi Parisian tiger
    What happens when you try to open any file from the same location where you are saving the file using Save As command ?
    Will it be possible to join a connect session with me ?
    Please do let me know about your time availability ?
    Thanks & Regards,
    Raghuveer Singh
    [email protected]
    Time Zone: +5:30 GMT (IST)

  • How do I set Firefox 29 to always show the bookmarks sidebar with one click instead of a drop down menu?

    I've decided to just get used to Firefox 29 instead of messing with add-ons and what not to make it look like it used to but one thing that is too ingrained is a favorites/bookmarks sidebar with one click. I just don't like the drop down menu. Is there a way to set the "Bookmarks" button to show the sidebar in one click?

    I want the bookmarks sidebar button. This should be a BASIC feature available, not something I need to install an add-on for to revert to some "classic restore". Why is something so straightforward and easy to use considered "classic", and everything has to be hidden and hard to see in this new version? All the colours in the new tabs BTW are are BLUE, and they blend in with the background at the top, you can't see the tab edges - whose bright idea is this?

  • HT1349 How can I set up drop down menu in a cell of ipad2 numbers?

    I want to set up drop down menu in a cell in numbers spreadsheet. Data validation in excel provides that. But what formula should I use in iPad2 numbers?
    Thanks!

    I dont think it can be done. This thing has been discussed somewhere and so far, no solution yet.

  • How do I set the border preferences when formatting cells in Numbers?  After I make my selections and close the drop down menu, nothing happens.

    How do I set border preferences when formatting cells in Numbers?  When I use the drop down menu under Inspector, and set the preferences I want, a blue line shows up in the appropriate cell or cells to which I want to apply a border.  When I close the menu, the blue line goes away and there is no border.

    Jerry,
    I'm sorry for the intrusion on this thread. I had only made a simple comment, and then others responded. It was not my intention, especially since the original question was marked as answered. I will direct responses to any comments I make in fture postings that deviate from the OP's question to a newly created topic if I need a response, if not, I will just add a statement at the end of my comments to please not respond.
    As to your diagram, it is the ability to select the non-contiguous cells, and then be able to simulataneously select a specific part of the border edge, and then be able to change them all at once that I was after. That is something that is not possible in Numbers. It seems that in your diagram the "before", was attained by selecting each cell one at a time, and changing its border edge, one at a time. Then, in the "after", selecting the non-contiguous cells and changing the "Stroke" settings for the lines was attained simultaneously since that is possible in Numbers.
    If I am correct in how you attained the results in your diagram, that wasn't really what I was trying to achieve, since if the option were not grayed out, it would only select the same border edge on all selected cells. If I am incorrect, then I would like to have your input.
    Once again, sorry for allowing my comment to develop as it did.
    In God's Harmony

  • Loaded Yosemeti, cannot access App Store nor iBook  Cannot sign out from store drop down menu , app crashes and will contact Apple.

    Loaded Yosemeti, Cannot access App Store. It shows I am signed in but when I try to sign out of App Store from the store drop down menu the application crashes and says "will send to Apple on re-open". I can access iTunes okay, just checked iBook store and cannot access this either.

    yup, me too. Only  havent made any changes to any of my 4 Ale/Mac Devices,. Im not sue why so i guess we ait and try later...?

  • Drop down menu hidden behind javascript slider

    I have a js slider that is sitting in front of my drop down menu.
    I tried the x-index in my css file using position as absolute and nothing...
    Can anyone help..I am new to this. I am using Easy Rotator for the slider
    Thanks
    .servicesdropped {
        display: none;
        text-align: left;
        position: absolute;
        background: #172323;
        font-size: 12px;
        width: 590px;
        -moz-border-radius: 5px;
        -webkit-border-radius: 5px;
        border: 1px solid #000;
        margin: 10px 0 0 20px;
        padding: 10px 20px 20px;
        z-index: 40000;
    http://99.98.44.183/TEST_WEB/index2.html#

    64 errors is not acceptable.  You still have non-working menus owing to the malformed lists and your slider doesn't work.
    I'm trying to be constructive when I say this site is seriously overdue for a re-build.  The table layout with a gazillion spacer.gifs is a relic from 1990's web design.  Practically speaking, this site belongs in a museum.  In the long run, it would be better to re-build it with CSS layouts and modern web practices See Responsive Web Design.
    Nancy O.

  • Console app diagnostic reports .crash drop down menu

    Console app
    Diagnostic Reports, either User or System having a crash report
    Select one of the crash reports
    Ctrl-Click to get the drop down menu
    Click Mail
    I observe nothing happening
    What is suppose to happen?

    Have you checked Mail > Window menu? I've found sometimes Mail does not bring the new message to the foremost window.
    Also, you might try the same in Safe Mode and see if that works.
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)
    If this works look in System Preferences > Users & Groups > Login items and disable any third party login items. Nothing is put in that folder by default, so anything in there is yours.

Maybe you are looking for

  • Issue in updating Cost Centers for Employees

    Hi All, 1.     Is it necessary that infotype 0000 & 0001 needs to be in synchronization i.e. both the infotypes should contain same no. of records? 2.     Is it necessary to assign cost center to both the position and the employee in infotype 0027 fo

  • How to insert and delete a row after filter applied

    I thought I had figured out the solution to this problem but apparently not... How do you insert a new row into a JTable after a filter has been applied? The problem is once the data is filtered when I add a row, I'm getting an ArrayIndexOutOfBoundsE

  • My hold button is broken

    my hold button is broken and my ipod is now stuck on hold, is there any way i can get onto my ipod?

  • Mixing two company codes

    Hi SAP experts I have few questions related to Amalgamation of two company codes. As per our business decision they want to Amalgamate two company codes 1234 and 5678 , This client has been using SAP since few years. what are the precautions which sh

  • How to sign in on latest version 7.5.64.102 using ...

    Hi! I updated my skype with 7.5.64.102 version and I cannot sign in with my Microsoft account. How can I do this? Attachments: Skype.jpg ‏57 KB