Slide for Emergency - Stuck on Lock Screen

Recently on my new iPhone 6,  I noticed that the battery percentage was not going down with the use of my device.  I held the lock button to power off, and I turned the phone back on.  When I saw the lock screen,  the time was not being displayed and the "Slide to Unlock" prompt was changed to the "Slide for Emergency" prompt.  After sliding to input my passcode before Touch ID could work, my passcode would not allow me to access my phone and instead, my phone vibrated once and sent me back to the slide to unlock screen.  These screens seem to be very glitchy, often times not responding to wake button presses or home button presses.  The screen will also often go black for no reason.  My device is running iOS 8.1.2 without any jailbreaks. I've already tried turning it off and back on, and holding the lock and home buttons at the same time.
Any help would be appreciated

Try the following testing after each step
- Reset the device. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

Similar Messages

  • My iphone 4s is stuck on lock screen it will not respond to myfinger to slide it open but it responds to my finger when itouch the on screen home button ......

    my iphone 4s is stuck on lock screen it will not respond to my finger to slide it open but it responds to my finger when itouch the on screen home button ......

    Hello samayaa,
    Thanks for using Apple Support Communities.
    Have you tried either restarting or resetting your iPhone?  If not please do so by following the directions in the article below.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Take care,
    Alex H.

  • I updated my iPhone 3G today and after the update it said on iTunes that my sim was not compatible and my iPhone screen went on to slide for emergency/connect to itunes. Ive tried restoring it but it hasnt worked. Please help!

    I updated my iPhone 3G today and after the update it said on iTunes that my sim was not compatible and my iPhone screen went on to slide for emergency/connect to itunes. Ive tried restoring it but it hasnt worked. Please help!

    Unless the iPhone was purchased  as unlocked very recently directly from an Apple Store (the only place in the US where unlocked iPhones are sold, and then only since June), which from the symptoms I doubt is the case, then it was locked to AT&T and jailbroken to make it work with an Irish cell carrier. Updating the operating system has now relocked the iPhone back to AT&T.
    Only the cell carrier can institute an official unlock, one which will hold across updates of the operating system, and AT&T will not do so for any reason. All we can advise here is that you return the iPhone to your uncle and purchase an iPhone there in Ireland.
    Regards.

  • IPhone 2G - Stuck on Connect To iTunes/Slide for Emergency

    I was going back to my original iphone 2g where I'm stuck on "Connect To iTunes/Slide for Emergency" screen.
    This is not a jailbreak phone as it was working phone until I choose an upgrade and went back to orignal iphone. I was told at AT&T store I have to activate with iTunes. With latest version of iTunes, I get connection time out error[no error code] on connecting to iTunes store after activation is complete. I get an email from apple my phone is activated, but I still see Connect To iTunes... As soon as I plug-in the iPhone I get connection time out error.
    Per AT&T everything provisioned as per my account and even they put the sim in a diff phone and it works. Thouhgt I could try with old version on iTunes and got atleast a stage I can see everything [Name, Capacity, Software Version and Serial Number] in ituens. This is with ituens version 9.1. But I still see Connect To iTunes... As I run diagnostics from itunes I see that orange for 'No iPhone or iPod found' under 'Ports'. Interstingly, if I take out the SIM, I can see everything [including my screenshot] and I can browse using Wi-Fi but no calls as there is no SIM. This is sixth day that I dont have working phone and still counting... 
    Since I dont have a back up and not sure how best I can bring my phone back online without restore. Plz help.

    This has been taken care by sr advisor at apple.
    The problem seems to be an issue as the apple server does not know my iphone at all based on the serial number. They manually updated the s/n and sim on their servers and I dont see connect to itunes window anymore by connecting to iTunes and phone is back online without any restore.
    Per my understanding I should get an email as it updates the content on the servers, but I never got one and ended up calling again after 48hrs. Then I was told you should be good, goahed and connect to iTunes, ofcourse I was also told if that does not work you have to try restoring.. scary!!
    Now, I'm back on searching to upgrade my phone
    Happy Thanksgiving.

  • Updated 4.0, stuck on "slide for emergency"

    Everything updated pretty quick, and I went to turn it on and now I get this "slide for emergency" message, anyone know what to do?
    iTunes won't recognize it, I get this error message:
    "iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)."
    So I can't restore to the backup I did before I updated.
    Tried restarting iTunes. And no this isn't a jailbroke phone. It's straight from Apple/AT&T.
    I've tried restarting the phone by holding both home button and power button. Still frozen.
    Please help!
    Message was edited by: telle926
    Message was edited by: telle926

    To put the iPhone into DFU or recovery mode:
    1. Connect your iPhone to your PC.
    2. Open the iTunes application.
    3. Hold down the top button on your iPhone and the circle home button at the same time for at least 10 seconds.
    4. After exactly 10 seconds release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode.:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes"
    5. Just click OK. Your iPhone screen will be black as well.

  • After update to ios 7  my 4s gets stuck in lock screen

    Every now and then my iphone 4s gets stuck in lock screen, I can't slide to unlock. The only way to solve the problem is to switch off and then on the iphone and then it works again.
    Any clues?

    Hi zzcool,
    Welcome to the Support Communities!
    To address this issue, I would suggest restarting and/or resetting the iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
    iPhone User Guide for iOS 7
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Cheers,
    - Judy

  • How to get rid fo emergency button on lock screen?

    Need to disable emergency button on lock screen. I do not like it when the police call me saying I made a false 911 call while I am working.
    Anyone figure out how to disable?
    Please help.
    Scott

    Hi and Welcome to the Community!
    This article may be partially on point:
    KB26459 How to prevent accidental emergency calls from a BlackBerry smartphone
    Many jurisdictions require that ability, and so it cannot be overridden.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Slide for emergency

    My iphone is stuck at slide for emergency though it was working till date. I bought this Officially unlocked iphone from UK and I am in India for last one year. It was working fine and today it stopped working.
    Error message displayed:
    There is a problem with your IPhone
    We are sorry the iphone you connected is not recognized and cannot be activated for services. We recommend you visit your nearest Apple Store for more information.
    I have tried DFU 3-4 times but of no use.
    Can you please guide me as phone is bricked.

    You say you bought 'Officially unlocked iphone from UK'.
    Where did you buy it and who unlocked it ? I ask as we have about one person a day here saying they have an officially unlocked iPhone bought in the UK which turns out not to be from the UK at all.
    Its probably awaiting a valid SIM card from the original country and being activated with account details, which you would not get unless you had it on its original network.

  • I can't figure out how to resize my picture for my home or lock screens.

    I can't figure out how to resize my picture for my home or lock screens. It shouldn't be his difficult. Any suggestions? I'm running the latest software. Thanks.

    whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
    If you are in japan, you need to use the japan app store

  • HT201210 TRIED UPGRADING OLD IPHONE FROM SOFTWARE 3.0 BUT NOW ONLY SHOWING SLIDE FOR EMERGENCY.HELP

    tried upgrading iphone 16gb from software 3.0 but now only showing slide for emergency.help

    Connect in recovery mode, explained in this article: iPhone and iPod touch: Unable to restore , then choose "restore" when you right click on your device in the device list and set it up "as new device" How to set up your iPhone or iPod touch as a new device

  • I have an iphone 5c, and for some reason the lock screen picture is blurred. how can i fix that?

    i have an iphone 5c, for some reason the lock screen picture is blurred. How can i fix that?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset   >  http://support.apple.com/kb/ht1430
    Restoring  >  http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first..
    More Info Here  >  http://support.apple.com/manuals/#iphone

  • Brand new iPhone 3GS 32GB, put sim card in, turned on, Slide for Emergency.

    I just bought an iPhone 3GS with 32GB black, I used the pin to eject the sim card socket, and put the sim card in.then i pressed the silver power button at the top right corner for 3 seconds, it turned on with the gray apple. Then it comes to "Slide for emergency" with this itunes icon.
    Now what do I do?

    Ok seems to work. Thanks very much. Connecting to iTunes solved the problem. I presume I was one of the few cases where the iPhone didn't work without being hooked up to a computer first.
    (I had read reports about this happening to people after they had upgraded, or 'jailbroke' their phone, but since I had done neither of these things, I was worried)
    All iPhones have to be activated through iTunes. Usually it is done at the store when you buy it.

  • IPhone Message "Slide For Emergency" - Please HELP

    I got my new iPhone the other day!! It was working fine until I updated it...
    When i updated it, i turned the phone on and how it is saying "Slide For Emergency" in different languages!!! It wont let me do anything exept from dialing an emergency number.....
    Please Help

    Your iPhone has updated and is waiting for you to validate the AT&T account it is supposed to be registered with.
    If you hacked it to work with other networks, then you modified the software in violation of the license agreement for your iphone.
    One of the downsides to hacking an iphone is you can't update it the normal way afterwards.

  • My iphone 5 get stuck in locked screen when two or more missed calls or messages shown on locked screen list

    My iphone 5 get stuck in locked screen when two or more missed calls or messages shown on locked screen list

    Hi bhagath1339,
    Welcome to the Apple Support Communities!
    The first troubleshooting steps I would recommend in this situation would be restarting and if the issue continues, resetting the iPhone.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    If the issue continues after restarting and resetting, it may be necessary to restore your iPhone to isolate software versus hardware. Please follow the attached article if you need assistance restoring the device.
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Have a great day,
    Joe

  • Option to disable the "slide to call" feature for missed calls from lock screen

    I realized that when the iphone (running iOS5) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode). This may allow malicious and unwanted calls to be made from a locked phone by anyone having access to the phone and defeats the purpose of having the phone locked by a passcode.
    Don't get me wrong, it is nice feature for people who don't care about locking their phone, but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through. 
    At this point the only option that I see is to disable the phone related notifications from lock screen, which prevents all phone related notifications to be displayed on lock screen (missed or voicemail). This is not a desired solution.....
    This is the first time in the history of iOSes, that a user can make outgoing calls from a locked phone with a passcode. Even the voice commands (for dialling a number) have option to be disabled on locked screen.
    I was wondering if anybody else feels the same way about this? or have a solution?

    I share the same feeling with you about this issue.
    Actually I was very surprised when I discovered that!
    In addition to this, when you actually slide a missed call, it calls the person and when you end the call, the notification of the missed call is still present! So that person can be called again and again and again.
    This is a serious issue that Apple has overlooked!
    Please secure the iOS 5.
    Thanks.

Maybe you are looking for

  • Runtime error while executing New Hire action in PA40

    Hi All,i am getting short dump while executing PA40 for new hire action typecan anyone look into this and guide as i am new to HCMNote: getting dump only for one user id for rest all other user id i am not getting dump. Category               ABAP Pr

  • How do I know if my airport Extreme 802.11n needs updated firmware based on heart bleed issue using Mavericks?

    I have Mavericks on oour laptops. I have an Airport Extreme 802.11n WI-FI not sure when I bought it. THe article by Tim Cook and Heartbleed issue is very technical and only mentions Leopard operating system. So do not know if I need to upgrade firmwa

  • Discover 4i to 10.1.2

    Hi, We are upgrading from Oracle Discover 4i to 10.1.2; Was there any specific document available which says: - What are main steps we need to follow where migrating from 4i to 10i - What should we do - What should not be - New features available in

  • Key iteration via cursor

    Hi all, While looking at the documentation, I have been unable to find a way to iterate over the keys of a database without loading the values. Did I miss something or is this not possible? If not possible, are there any plans to change this? The rea

  • Interface Controller.............

    Hi, <b>Q A.</b> 1.  I have Two components in one application. 2. I am using comp2 in comp1 under Used Components. 3. Comp2 has service method Display_Data() which i am calling from Comp 1    onAction of some Button. 4. In Comp2 Interface Controller t