Slide scanning with Scanner G3110

My HP scanner g3110 works very well for usual task (scanning any size documentation black and white or color or color photos) but I can't scan a color slide. The resulting image is small even if I make a selection to scan just the slide and it is also very dark.
I went on HP Internet site and I followed the procedure to put everything up to date on the scanner but sorry, the problem is still there.
My operating system is WINDOW 7 (64bits)

Hi @joseph9
I would like to help you with your G3110 scanner. I understand it is working well with the exception of scanning slides.
Please take a looks at the following document; The scanned images are dark
Also, here is the how to section of the G3110 support site; Tips for scanning transparent items, this might be the most helpful
If the issue persists, though, I suggest calling HP. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

Scanning with Scanner interface

I have a user who was recently upgraded from Acrobat 7.0 Standard to 9 Standard.
With the previous version of Adobe Standard, she was able to scan files to pdf using the Epson scanner interface. (She has a Epson 2480 Photo Scanner attached to her laptop.)
Now, with Acrobat 9, when she attempts to scan in Acrobat, she goes directly into the scanning process and is not given the chance to "Preview" the image, so that she can crop it as necessary.
I'm noticing something about "Native" mode, but I'm unable to choose the other mode, "Memory", due to the fact it's greyed out. I'm ASSUMING that Native mode has something to do with NOT bringing up the scanner interface.
Is my assumption correct? Regardless, how do I fix it so that she can crop the image before scanning it in?
Thanks in advance for any information.
Rich

I have the same problem with Acrobat X Pro. Anyone have any somutions for this?

Pic from 35 mm slide scanner G3110

How to make print pics from a 35 mm slide 0n my scanner G3110

Hello contifor,
Welcome to the HP Forums!
I understand you would like to print pictures from your 35 mm slides using the Scanjet G3110. This Scanjet is only used for copying and scanning. You cannot print photos using this Scanjet. Do you have another printer other than this one, since you would like to print these slides?
First, I need to find out your operating system on your computer? Windows or Mac? I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

Elements 11 Divide Scanned Photos Function, can it work with scanner cover open?

I do a lot of scanning of where three items fit on the platen at one time. In the previous versions of Element this function worked, not automatically, but it worked with the cover open or closed, and it is much faster to scan with the cover open.
Is there some way I can adjust the sensitity of this function to be more sensitive or less senstive to backround color?
Thanks in advance,
jj

Hi ,
There is no option of changing sensitivity of Background color option in Divide scan photos In E11.
But one thing - Divide scanned photos works based on image resolution, so if your scanner output resolution is high , it works too sensitive and if output resolution is low it works less sensitive.
thanks,
earth-star

HT4505 I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Sorry, I was not given the option of posting to a Maverics community. I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Hi there Ira Fletcher,
I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
-Griff W.

Scanning with samsung printer/scanner/copier

why won't my samsung scx-4726f scan with the new os x upgrades?

Will it print normally? Try using Applications/Image Capture to see if you can scan. You also might try looking posting on the Samsung support web site - maybe someone has figured it out.

D-110 Slide Scanning

I have a D-110. Can I scan and digitize 35mm slides ? If so, do I need any other accessories ?

Hi cgn200,
RE: Slide scanning, take a look at this article:
http://www.hp.com/canada/portal/hho/digital_photography/organize_archive_photos/tips/scanning_slides...
Note: you need a photo scanner with built-in negative and slide scanning ability
You would need a product specifically designed for this purpose, as a standard scanner won't be able to produce satisfactory resutls. The products recommended by the article are the
HP Scanjet G3110
HP Scanjet G4010
HP Scanjet G4050
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Slide scan attachment for 5200 C

I have an old back-up computer running Widows XP in conjunction with an HP 5200C scanner. I have the slide scan attachment for the scanner but can't get it to work. I no longer have any of the operating instructions.
What do I need to do?
This question was solved.
View Solution.

Oh ok got ya.
You must be using one of these shown in this review.
http://www.andromeda.com/people/ddyer/photo/slide-transfer.html
Those are a rare piece of equipment. No, there are no instructions on the net for the prism attachment. Very frustrating HP. I heard they were ok but not that great actually.
So you are asking how to place the slide in the prism and use it, correct?
The only instructions I can find are for a homemade version that works under the same principle.
The key is to place the slide in the center of the scanner but position the slide to one end of the prism so I can get as much light as it can to reflect back into the film.
Look at the example on this web page for the homemade version. The principle should be the same.
http://www.abstractconcreteworks.com/essays/scanning/Backlighter2.html
If this is what you are asking, then this should work.

Convert slide scan files to .dng?

We are scanning masses of old slide scans and bringing them into Lightroom as .tiffs. Recently I was told that if I convert those .tiff files to .dng that would enhance developing operations in the Develop module and almost simulate working with a RAW file.
Does anyone have any experience with this process? And any opinion about it?

The only advantage of DNG over a TIFF is its ability to retain the full RAW capture of a photographic sensor. A scanner works differently, some have a pseudo RAW format...Nikon scanners can do this scanning to the NEF format. But if you have scanned as a TIFF keep the original as a TIFF LR's functionality will be the same with a DNG made from a TIFF and the original TIFF. Whoever is telling you taht you can magically gain information by converting file types is misleading you and DNG compression (whilst the best for RAW formats, isn't any better than TIFF's so the file size remains the same as does the ability to write xmp metadata to the file (rather than as a sidecar file. In brief converting anything other than an original RAW file to the DNG format is just a waste of time.

Looking for Pixma plus 35mm slide scanning!

Hello.
I used to have a Canon Pixma printer with a 35mm scanning facility built in to the lid. Broke down some time ago, unfortunately.
And now Canon don't do Pixma printers with 35mm scanning.
Been scouring the internet for an MG8250 or equivalent, with no luck. I don't WANT to change from Pixma. I think it's possibly the best colour print system you can buy, but I do need that 35mm slide scanning facility, so any suggestions as to an alternative product, i.e. a good quality colour printer (plus copier plus flatbed scanner plus 35mm slide scanner), offering similar print quality as the Pixma?
I suppose one alternative is to buy a stand-alone 35mm neg scanner, but I also have a number of ancient (1890s) large b&w negatives so a 35mm-only carrier wouldn't do - I need something where I can use bits of tape etc. to hold odd-sized films.
Thanks for reading, and I hope someone has a suggestion or two.
Allen.

Aside from looking at the pretty transitions, did you read
the rest of the
page? See the part where it says "Step 1 - copy and
paste....."
Then do Step 2. It just can't get any easier than that.
Read the bit underneath step 2 and it tells you how the
script can be used
multiple times on a page - Again - step 1: you give it a new
name in the
javascript file, and add the names and paths of the images
for the
consecutive slides you wish to display. Then, again, Step 2 -
you call the
slideshow somewhere on your page.
Without sounding condescending, sit back, read the
instructions again, and
have a go at implementing them into your page.
Upload your efforts, post a link to the page, and we'll be
able to help you
further if you need it.
You can describe what you have, how you want it to work, but
until we see a
page live, its a bit hard to help further.
Last resort, spring for a paid solution to do it all for you
(which I highly
recommend) -
http://www.projectseven.com/products/galleries/ssm/index.htm
Brendon
"Fugasi" <[email protected]> wrote in
message
news:gju0dl$olu$[email protected]..
> Brendon-
>
> >I've used this one many times before with good
success:
>
> I don't know how to use this, its a bunch of code.
>
> 1. Do I C&P this and paste it into my page? Where on
the page?
> 2. I actually want to have four separate slide shows
happening at once on
> the
> same page. Will this code allow me to do that?
> 3. Right now I have four photos in-line horizontally in
non-css table. I
> want
> those four to interchange as a slow dissolve slide show.
How do I specify
> that
> I want the slide show to appear in the table cells?
>
> Thanks
>

Bar code not scanned by scanner machine.

Hello!
Problem is there after print the report, bar code is not scanned by scanner.
Thank You.

Hi,
Do you use crystal report or standard Print Layout?
if you use Crystal Report, Normally we use font "Code39"
Try this:
Add asterick ( * ) between the text you want to scan.
e.g.
asterickDOCNO123456asterick
asterick is the symbol with no space in between.
and change the whole string font to Code39
nd.Q
Edited by: Andy Quipit Sayus on Aug 9, 2011 12:44 PM
Edited by: Andy Quipit Sayus on Aug 9, 2011 12:45 PM

Can No Longer Scan With Canon MG5220 But Printing Works Fine

Hello,
I have not had luck with Canon so hoping my Apple community can come through for me Here is my problem. I have a Canon MG5220 "all-in-one" that I am able to print to just fine. I was able to scan a year ago but something has changed and I am no longer able to scan. I have all the Canon software and the error I get is as follows when using MP Navigator 4.0 EX:
"Error 2.10 - Cannot communicate with scanner. Cable may be disconnected or scanner is turned off. Check status."
I have deleted and re-added my printer several times but that has not done anything. I believe there was a time in the past when it was scanning properly that I had a separate printer icon under "Printers" on left of "Print and Scan" sscreen for the scanner but not sure (can someone confirm?). Regardless, I only have one now.
My printer is connected as follows: MG5220 is wireless to my FiOS Actiontec router and then hardwired Ethernet to iMac. I have turned Wi-Fi status on and off o Mac and that has not made a difference.
Any help would be much appreciated.
Thanks,
epie

Open Finder and navigate to Applications > Canon Utilities > IJ Network Scanner Selector EX and open the Canon IJ Network Scanner Selector EX utility. This utility will search your local network for the MG5220 and if found, should show something like below.
If the MG5220 is found, ensure that it is selected - as opposed to "Do Not Use" - and then press the OK button.
Now open MP Navigator and select the Preferences (as shown below)
From the Preferences window, with the General tab selected, ensure you have the MP5200 Series Network set as shown below (which is for my wireless MG6250).
If it is set, press the OK button to close the Preferences window and then see if you can scan.

HP officejet 6500 E709n problem with scanner

Hi
I buy HP officejet 6500 E709n i have problem with scanner when printer work wireless (when work USB or cable RJ45 it's ok). When I try scanning windows give me problem "4,[2,7,80040007),(3,7,0)]", I change drivers and still not working. I have Vista and router D'link Di-524. Please help

Hi
I am having problem scaning from printer to desk top.Please help me

Can't scan with feeder, but feeder works when printing

Hello Everyone,
Hope you can help me. The feeder works fine when printing, but does not feed when scanning. However, the scanner works fine on the flat bed. so...
The feeder works when printing
the scanner works on the flat bed, but
I'm not able to scan with the feeder. Ugh!
I updated my driver and tried everything on the HP website to no avail. Scanning page by page on the flat bed is way too tedious and time-consuming. Can anyone help me?

Hi @zaja
Have you seen this page: The Automatic Document Feeder (ADF) Does Not Pick Up Paper?
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

Cannot scan with HP LaserJet M1005 MFP

I updated to Snow Leopard 10.6.3 yesterday. Big mistake as I cannot now scan with my HP LaserJet M1005 MFP. I have been unable to find a solution here or via Google. Does anyone know if this is possible? I realize this device has never been "Mac friendly" (one might even say, not compatible.... despite HP's over-generous claims), but I would have thought there would be a new driver for SL by now.
If not, could anyone recommend a non-HP scanner (not MFP) that works well with SL?
thanks!

Hi @3Digit ,
I see that you are having issues scanning, there isn't any scanning software in the HP folder. I would like to help you out today.
Open the HP Scan window with one of the following methods:
Double-click the HP Scan icon () for your printer on the Windows desktop.
Click the Windows icon (), click All Programs, click the HP folder, click the name of your printer, and then click HP Scan.
If you are missing the HP Scan software altogether, then the full software didn't install on the computer.
If that is the case, uninstall and reinstall the printer software. Here is the link for the newest drivers. Software & Drivers.
First do these steps, before installing the software, just to make sure it fully installs.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
I have provided a document for how to scan. It is for Windows 7, but the steps will also work for Windows Vista.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Slide scanning with Scanner G3110

Similar Messages

Maybe you are looking for