Slide Show on Home Page Creates Scroll bar in browser...

I have created my site, and at the tope of it I have a hero Slider Composition with text in it. But, when I view it in the browser, it scrolls to the right. But, if I delete the composition slide show, the scroll bar disappears. I've tried to re-create the slide show, but it continues to do the same thing, I would really appreciate some help quick, in that my site is live. http://www.serpentsndoves.com

Firstly: Congrats on a very cool web design!!
I had a look at the site, and think that what you are seeing is expected behaviour. You have little control over the width of the browser window a viewer might have set when they are viewing your web page. It can be narrower or wider than the page width you set in Muse:
When the browser window is narrower than the width of the web page, the scrollbar at the bottom for right to left movement appears.
When you make the browser window wider than the width of the web page, the scrollbar will disappear as the full width of the page is displayed.
In contrast, if you were to look at the page on an iPad in landscape, the width of the page will snap to the width of the browser window, as mobile browsers behave differently to desktop browsers.
Cari

Similar Messages

How do I get back my AT&T Yahoo Home Page and Tool Bar?

I am a senior citizen with little computer knowledge. I cannot cope with changes to my home page because I do not have the knowledge/skills to undo the changes your program has installed.
AT&T is my Internet Service Provider. Firefox is my browser. Right? When I installed the newer version of Firefox it usurped my AT&T Yahoo Home Page and Task Bar. I want my old home page and task bar back.
I used system recovery to go back a couple hrs. prior to when the new Fire Fox was installed and lost Firefox & At&T. Was in a great state of frustration when I couldn't get system recovery up after going to control panel. System recovery finally popped up again and I went forward to after installation of new Fire Fox and have system up again.
I am unable to read up on new Fire Fox program now. All I want is my old AT&T Yahoo Home Page back with their Task Bar. I can learn new Fire Fox as time permits.
For a non-profit organization I find Fire Fox quite aggressive. That is good when mobilizing us to write or call Congress but not to take over my Home Page.
Will have to admit new Fire Fox sure is faster.
I do want to commend you for taking a stand against what Congress is trying to do and also for your non-intrusive, not obnoxious way of asking for donations. You help inform us and let us know of your need and anyone that is not a free loader with a conscience, I think, would make a donation according to what one can afford. Keep up the good work and the good fight..........please do help me restore my home page back to AT&T with the old task bar.
I appreciate all the help you can give me. Please excuse this long note.
Blessings, Helen
Added Note: AT&T home page returned. Still need Tool Bar. Troubleshooting information from Firefox help for Tool Bar below. Also info to restore Refresh and Home icon below.

This is the answer from Firefox Help to get Tool Bar back up:
Why are the menus (File, Edit, View, etc.) missing?
If you're using Windows 7 or Windows Vista, you now have an orange Firefox button that takes the most common functions and puts them in one menu.
To temporarily show the old style menus, just press the Alt key.
To have them shown all the time, right-click on an empty section of the Tab Strip and check Menu Bar in the pop-up menu.
Menu Bar - Win
Pressing the Alt key didn't work for me but the latter instruction did the trick.
Check the Navigation Bar too on the pop-up menu if you want your Refresh and Home Icons to show. It took quite a few right-clicks for me before the pop-up menu I needed came up so keep trying until the right menu comes up.

Iframe showing only white and no scroll bar

Hey
I am trying to make a site with 3 iframes that scroll vertically ( to right ).
My file is a sliced table.
After watching a tut vid on layers mag I finally ventured into some code.
<IFRAME src="images/cow_thumb.html" width="196" height="282" frameborder="no" scrolling="yes">
in the browser test i see a white box only
my test page This image is just a quick build to work on function I repeated the images in ps.
<html>
<head>
<title>cow-thumb</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">

<img src="images/cow-thumb.jpg" width="72" height="360" alt="">

</body>
I do not have a scoll bar anywhere and the image is white. What am I doing wrong?
Thanks!

Thanks, I do need help, the information is foreign to me, I should have said I am new at this.
How did I get the iframe if there is no code? I wrote code, tried to do did what this vid taught...
http://layersmagazine.com/using-iframes-in-adobe-dreamweaver.html
thanks so much!
Date: Sat, 6 Aug 2011 18:19:19 -0600
From: [email protected]
To: [email protected]
Subject: iframe showing only white and no scroll bar
Thanks for the link.
There is no code on that page calling to display an iframe.
Fix these errors and we can move on
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.annie-art.com%2Findex.htm&charset=%28de tect+automatically%29&doctype=Inline&group=0
I f you need help, just holler!
>

How can I get new tabs to open showing my home page?

When I open a new tab, it shows a blank page. How can I get it to open showing my home page?

Install this extension to add that feature to Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/

When I click on a link in Thunderbird, Firefox 4 starts, but just shows the home page, not the page I clicked for

When I click on a link in an email in Thunderbird, Firefox 4 starts, but only shows the home page(s) not the page of the link

I think i've found how to fix this issue when it appears. Don't know what caused it to happen, but that's up to the devs.
In Thunderbird, you need to re-register http and https to make them open with Firefox (or open well with firefox in this case).
How to to this?
Well... open the about:config in thunderbird. You can achieve this by clicking configuration-editor in the advanced tab.
search for the strings: network.protocol-handler.warn-external.https and network.protocol-handler.warn-external.http. Set both to "true".
The next time you click on a link from within Thunderbird, it will ask you to set wich program you'd like to open it with.
Be Aware now!!! Firefox may already be listed in there, but don't pick that one. instead... choose to browse for the app and point to the binairy/exe of firefox.
(for example: /usr/bin/firefox or c:/program files/mozilla/firefox.)
You will notice that firefox now does open up with the page you just clicked on.
If it doesn't right away... just restart thunderbird and check again.
Please respond if this works for you too on all platforms. It's more interesting to know it does than if it's not.
Greetz,
Kenny

How can i get a tab to open showing my home page?

How do I get tabs to open in my home page?

You can install one of the many add-ons to accomplish this. There are many different ones available, so you can just go to the Firefox add-ons page and search for "Home Page".
Also, ensure that you've setup Firefox with your Home Page URL. If you haven't done so, follow the steps below:
* Go to Options (i.e. \Firefox\Options\Options);
* Go to the General tab;
* Under Start-up - enter the URL in the Home Page URL box.
Note: Make sure that you have chosen "Show my Home Page" under "When Firefox Starts" (use the drop down arrow).

Can we create scroll bar Table in ADE?

Hi All,
Can we create scroll bar Table in ADE. Please refer the enclosed attachment Table.JPG.
We used the following CSS property, which is displaying the scroll bar table in HTML but not in ADE.
#table_data {width:400px; overflow:auto; }
Please Suggest.
Regards,
Jaffar

Hi Swathi,
The whole concept of internal table is to manipulate the data at runtime.
This replaces the concept of two dimentional array in other languages.
The power of internal tables is it gets lakhs of records at runtime. I mean it can accomodate lots of records at runtime.
So you can create a table type in DDIC and use it to declare your internal table.
Yes, You can create global internal tables for function modules.
By declaring the internal table in top include you can use this internal table all the function modules of that function group. So if one function module is filling the data another can use it as it is stored globally.
Hope this answers your curiosity.
Award points if useful else getback.
Aleem.

Slide show with fixed page width

I made this previously in another side (e.g. thaisailing.com): to have a slide show at 100% page width so that it scales from left to right, independant of the window size. But this time it will not succeed. If I take a rectancle and fill it with one image, it works fine. But not with a slide show element. It always goes back to the side of the inner space only. How can I have a slide show with full page with (not full screen)? Thanks,
Frank

Hi Frank,
Please refer to the following link http://www.musegrid.com/adobe-muse-tutorials/how-to-build-a-responsive-design-images-slide r-in-adobe-muse
Cheers!
Aish

How to read data in Page Control "Scroll Bar" in Component Buffer ?

Folks,
Hello. My Component has 2 pages: "JournalLine" and "JournalTotal". In the page "JournalLine", I insert page control "Scroll Bar" and then insert a record "JournalLine2" into the "Scroll Bar". Thus, the Component Structure is as follows:
Scroll - Level0
JournalLine
JournalTotal
Scroll - Level1 Primary Record JournalLine2
The fields in "JournalLine" are Unit, ID, Date.
The fields in "JournalTotal" are Unit, ID, Date, TotalDebit, TotalCredit.
The fields in "JournalLine2" are Account, Amount.
Since the record "JournalLine2" is inside of the page "JournalLine" and inside of page control "Scroll Bar", I click on "+" push button and add as many lines as I need and type in data into each line.
My purpose is to add up all numbers in "Amount" field of "JournalLine2" and assign the total amount to "TotalDebit" or "TotalCredit" in "JournalTotal" page. My PeopleCode is as follows:
Local RowSet &level0, &level1, &level2;
Local Row     &total;
Local Field     &field;
&level0 = GetLevel0( );     /* get level0 Rowset */
&total = &level0(2);     /* get row JournalTotal because it's on the 2nd position in level0 */
&level1 = &level0.GetRow(1).GetRowSet(Scroll.JournalLine);     /* get level 1 RowSet for record JournalLine */
&level2 = &level1.GetRow(2).GetRowSet(Scroll.JournalLine2); /* Assume this line gets all records in JournalLine2 */
For &I = 1 to &level2.ActiveRowCount
     &field.Value = &field.Value + &level2.GetRow(2).JournalLine2.Amount.Value;
End-for;
&total.GetRecord(Record.JournalTotal).GetField(Field.TotalDebit).Value = &field.Value;
&total.GetRecord(Record.JournalTotal).GetField(Field.TotalCredit).Value = &field.Value;
I place the above PeopleCode in Record Field "Amount" FieldChange Event. Because all records and fields are in the component buffer, in Browser, after type in data into each line in the record "JournalLine2" in the page "JournalLine", then click on page tab "JournalTotal", the total amount should appear in the field "TotalDebit" or "TotalCredit". But nothing is in the field "TotalDebit" or "TotalCredit".
The above PeopleCode is not working out. I place the above code in component record field "Amount" FieldChange Event as well and not working either. My questions are:
First, Is it correct for the above PeopleCode to read all records in "JournalLine2" Scroll Bar in page "JournalLine" ?
Second, Do we need to use some methods like ScrollSelect( ) to read those data in Scroll Bar ?
Third, Do we need to use "ActiveRecordCount" instead of "ActiveRowCount" ?
Thanks in advance !

Folks,
This question has been solved by myself. Thanks.

4.0.1 will not load home pages instead loads last view pages even with it set for showing only home page.

I have set under tools, options, general tab for showing my home page but when I restart firefox it loads the last viewed sites instead of the home page.

bump
It seems to be a bad interaction between Tomcat and running as a Windows service.
No thoughts out there?
I guess I'll be forced to upgrade to Tomcat 4.1.27 or 4.1.28. - MOD

Why i click in my home page, my menus bar suddenly down, just not same as others, why?

why i click in my home page, my menus bar suddenly down, just not same as others,
i cant fix this though master n home page.

sorry i dont have url.
but i printed screen
the left one is the second page of the website
the right one is master page
the problem is the menu bar of the second page is difference,
how can i fix that.
thank:>

FC publishes my 12th page as first, instead of showing the home page immediately. Page order?

I created a site in Flash Catalyst and when I published it everything was fine. Then I went back in and created a site map and suddenly, when I open the web page, the Site Map shows up first, instead of the home page. Is there a way to determine page order? I've checked to make sure that this page is not showing in any of my other states/pages. Help?

Have you checked which state is set as the default? You can see which state is the default by the dark dot in the upper right of the color bar. To set it, right-click (option-click) on the state that you want the as the default from the contextual menu that will appear.
Chris

ALV top-of-page remove scroll bar

Hi!
In my ALV i have a header with some information and a logo. With the logo it creates a vertical scroll bar. I can't reduce the size of the logo because it as to be that size.
So...i've been searching for some way to remove the scroll bar from the header, butt i didn't found anything that could help me.
I'm using 'REUSE_ALV_GRID_DISPLAY' with i_callback_top_of_page   = 'TOP-OF-PAGE'. And in form top-of-page i use
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_header
      i_logo             = 'LOGO'.
to call the logo.
Is there a way to remove or set the header to a fix size?
Thanks in advance,
   RT

Hi!
In my ALV i have a header with some information and a logo. With the logo it creates a vertical scroll bar. I can't reduce the size of the logo because it as to be that size.
So...i've been searching for some way to remove the scroll bar from the header, butt i didn't found anything that could help me.
I'm using 'REUSE_ALV_GRID_DISPLAY' with i_callback_top_of_page   = 'TOP-OF-PAGE'. And in form top-of-page i use
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_header
      i_logo             = 'LOGO'.
to call the logo.
Is there a way to remove or set the header to a fix size?
Thanks in advance,
   RT

Can I add a slide show to my iWeb created site using MobileMe

Hi there,
What I want to do is to create a folder with a load of pictures of me in them and then add them to the Home Page of my website, so that when people visit my website all the pictures play as an automatic slideshow at the top of the page and automatically scroll through all the pictures in that set.
I have created my website in iWeb 09 and it is published on MobileMe, I really hope that someone can help me because I really want this to work. At the minuet I can add MobileMe photo albums but I cant get them to play as an automatic slideshow and just scroll through all the pictures (without having to open any separate windows or anything)
Huge thanks for you help

Jason ~ The following two suggestions don't involve MobileMe...
Here's an example of a fast loading, looping embedded slideshow (not mine):
http://www.heese-cadieux.com
...and done like this:
iPhoto > select photos > File > Export... > QuickTime tab ...set width and height, etc.
Then iWeb > Media button > Movies tab ...drag in your movie created above by iPhoto.
Then iWeb > Inspector > QuickTime tab ...settings.
Note: The above generates a QT slideshow of small file size and thus appears quickly in a web browser.
An alternative approach (that doesn't require QT to be installed on the viewer's computer) is to set up a slideshow at weebly.com — open a free account there and then embed your Weebly slideshow page in your iWeb page:
Embedding a Site Within an iWeb Page
To see a Weebly looping slideshow, see the third example here:
http://blog.weebly.com/2/post/2010/10/photo-slideshows-now-available.html

How do you insert a slide show into a page in Fireworks or Dreamweaver CS4?

Newbie here. I just made a nice 4 image slide show in FW CS4 (under COMMANDS, CREATE SLIDESHOW) but can't figure out how to insert it into a page in FW or Dreamweaver CS4. My goal is to insert it into a FW page, then send it as a PDF to the boss for review before it goes into Dreamweaver. Can that be done? I assume if you can create the slide show in FW, then you can see it FW - or is that asking too much?? So far, I can create it, then choose to preview it in a browser (and it looks good). But then I click "done" and "x" out of the screen and it's gone. I saved the slideshow in a folder I created on my desktop. When I open the folder I see an images folder, a scripts folder, an "index.html", a "player_black.swf", and a "slideshow.xml". I've tried dragging all of these onto the FW page but nothing happens.. Also, the "insert" button in FW doesn't have a preset for slideshows. Neither manual mentions how to insert it into a FW or DW page.. Any help is greatly appreciated.

Problem solved. Found an import movie within iMovie.

Slide Show on Home Page Creates Scroll bar in browser...

Similar Messages

Maybe you are looking for