Slide show transition in Bridge CS4 not working

Putting together slideshows in Bridge CS4 I can not get the slide transition to work, no matter what timing I set for 'duration.'
I have tried opening it in several different browsers, but no dice. Also my slides are jpgs at 72 dpi - so, rather small.
Any help would be appreciated.
christian

You have to update bridge separately from PSE, and bridge ships with a pretty old version of ACR. Just go to Help>Updates in bridge and it will update itself for you.

Similar Messages

Web Gallery in Bridge CS4 not working

I've just started using the Web Gallery function in Bridge CS4. The output previews just fine, and loads perfectly from local disk in my browser. When I upload to my webspace, I get just a blank page.
I have contacted my ISP, who say that the problem lies with the Index.html file. They have run it through a validator at W3.org, and it comes back with multiple errors. i have no idea how to fix these errors, and in any case can't understand why it loads just fine from my hard drive, but not from my webspace.
Has anyone here had a similar issue?
Thanks

Yeah, and I don't see a 'show file names' box on the templates I've looked at.
What I did was go into the group.xml file and I could find the TITLE tags and changed those to what I wanted for my caption.
Still seems somethings not right, since I had to manually add them.

Bridge Raw not working, cannot see Raw image in Bridge

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

My Photoshop and bridge is CS4, purchased in 2008, and the canon 5D Mark
11, purchased earlier. I have CR2. The camera and software worked
together fine for all those years.
Now, however, when I click Bridge to open a file containing several
images, I do not get thumbnail images, just a circle with CR 2 and the
file name, no image.
If I double click one of the circles, the image will open in camera Raw,
and I can edit, and open photoshop and edit again. If I then save a Jpeg
version, I will be able to open it and see the image in Bridge.
The problem is that now if I shoot 100 pictures, I can open Bridge but
there are no thumbnail images, only CR2 and file name.
I hope this can clarify the problem. Camera and software have not been
changed.
Thank you very much. Please help.

Adobe bridge raw not working with windows vista in photoshop cc, why?

adobe bridge raw not working in photoshop cc, is there a fix?

Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) Canada

Hi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

Dreamweaver CS4 not working under MacOS 10.9

on starting DW CS4 it asks for Java Runtime engine 6, but Mavericks has Java v.7 installed. Since Java 6 was part of the OS of previous systems, I cannot install it seperately, besides it would probably cause conflicts with OS 10.9. Do I have to trash my DW, or is there a workaround.
Thanx

If I follow click the instal button on
I get the progress bar for about 1 sec and then the message about a supposed
network problem
which is unreal, since my network works perfectly for any other task and I
had even tried disabling the firewall and little snitch. Things are still
not working
Von: Jon Fritz II <[email protected]>
Antworten an: <[email protected]>
Datum: Montag, 25. November 2013 18:34
An: RoWo <[email protected]>
Betreff: Dreamweaver CS4 not working under
MacOS 10.9
Re: Dreamweaver CS4 not working under MacOS 10.9
created by Jon Fritz II <http://forums.adobe.com/people/JonFritzII> in
Dreamweaver support forum - View the full discussion
<http://forums.adobe.com/message/5872889#5872889>
This has been discussed a lot here, you need to install Java 6.
http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.ht ml
<http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html>
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/5872889#5872889
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/5872889#5872889 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/5872889#5872889. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Dreamweaver support forum at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=2240> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

In iPhoto slide show I want to add notes to each slide. Following the directions, I press VIEW but I don't see "Show Notes". How do I do it?

In iPhoto slide show I want to add notes to each slide. Following the directions, I press VIEW but I don't see "Show Notes". How do I do it?

hello louise, the firefox button will only be displayed in case the menu bar is hidden (''view > toolbars''), but you can access the options through ''tools > options'' as well in order to set a custom homepage...
[[How to set the home page]]

Why does it show my officejet 4622 as not working with an app when it shows it does in the info.help

My printer is an hp officejet 4622. I'm sorry to say I need step to step info as I am self taught 70 yr old trying to move forward. Thanks

Hi vitamary;
Hope you are doing well welcome to the HP forums
can you be more specific in what is the problem that you are having, what app is showing that the printer is not working?
Is your computer running Windows or is a Apple computer,
letm e know this information and I will do my best to help you.
Regards;
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Can I make a non-flash slide show using Fireworks, with JPEGs not GIFs?

Can I make a non-flash slide show using Fireworks, with JPEGs not GIFs?

Look to using jQuery instead of Flash. There are a variety of redy-made solutions available, just search Google or visit the Dreamweaver forum and ask there.

Slide show transition in IDVD can make it randomly?

Hi All,
Trying to make the slide shows transition to be random mode, but cant...
any way?
Thanks,
Wymond

is ok, i figure out already

Why do the "SHOW THE PREVIOUS PAGE arrows not work on some websites such as when I try to return to the previous page the arrows at the top right of the page are not dark black they are light grey and do nothing---HELPPPP

why do the "SHOW THE PREVIOUS PAGE arrows not work on some websites such when I try yto return to a previous page the arrows at the top right of the page do not work instead they are light grey instead black and do nothing---this is frustrating to not be able to return to the page before--HELP

If a page you go to opens in a new tab, there is no 'back' to go to. If that is the case, just close the tab and you'll be at the page you came from.

Adjustments made in LR 2.1 are not Showing up in Bridge CS4

I thought that I had read somewhere that LR2 and Bridge CS4 were aware of each other and photo settings made using one application would be seen by the other. I can tell you that CS4 is not reading ratings, color labels, and ACR settings made using LR. I guess that I was wrong about any integration between Bridge CS4 and LR2?

Paul and Greg, thank you for your insightful posts! This makes sense.
Jeff, I think that you have already shown your true colors, But if you want to make me feel 2 inches tall, go ahead and try. I reserve embarrassment from those people who I hold some respect for. You are not deserving of any respect because you obviously knew what Paul and Greg shared without trying to be sarcastic and yet withheld it just to teach me a lesson about how superior that you think that you are. Then you try to hide behind just being humorous. I don't buy it. If you had told me what Paul did, then made the comment about "reading minds", I would agree that this was innocent humor. But you withheld the useful information and thus your apparent attempt at humor (after the fact) came access as sarcasm, given the lack of help it provided. I can only conclude that you are the one who is flailing about and I have no need for this kind of help.

Slide show transition in Bridge CS4 not working

Similar Messages

Maybe you are looking for