Slide show unable to view on a IMAC... any ideas?

Hi ,
I made a slide show on my pc and uploaded to website and shared (e-mail link) to family on a I MAC. They are unable to view. Any idea's?
Thank you

They probably need to install this. It's free and it lets macs see .wmv files:
http://www.macupdate.com/info.php/id/17787/flip4mac-wmv-player
Another possiblity is that their version of flash is too old:
http://get.adobe.com/flashplayer/?promoid=BUIGP
Finally, you don't say which version of OS X they're using, but there have been imac models for well over ten years now, so their machine/operating system could also just be too old.

Similar Messages

I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

You stated; " I have been successful with My Power Mac "
A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
Does the iMac meet the hardware requirements for Mavericks?
Allan

I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.

The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

How to burn slide show to a dvd to watch on any tv

how do you burn slide show to a disk to watch on any tv

If you only have PSE, then output your slideshow as a wmv file and use whatever software you have to create the video dvd, even something like Windows DVD maker. If you also have Premiere Elements, then send the slideshow there for finishing.

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

Go to Finder > Preferences then select the General tab
Make sure External disks is selected.

I cannot eject a CD from my MacBook Pro. I tried restarting the computer and holding down the mouse and restarting it to no avail. On Finder, nothing is showing up on the CD Drive. Any ideas on how I can eject it?

I cannot eject a CD from my MacBook Pro. I tried restarting the computer and holding down the mouse and restarting it to no avail. On Finder, nothing is showing up on the CD Drive. Any ideas on how I can eject it?

How force eject disc: Apple Support Communities
Mac Mini: Eject DVD Apple Support Communities
https://www.macupdate.com/app/mac/49129/forceject-too
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support

HT201413 I am receiving the error code (-50). The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system. Is this why I get the error code? I can access the itunes store to view my account. Any ideas

I am receiving the error code (-50) when trying to access the itunes store. The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system (same PC) and have copied the folder across. Has the switch from 32 to 64 bit caused the problem? Is this why I get the error code? I can, however, access the itunes store to view my account. Any ideas please?

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

TS2621 Since my setting were updated I have been unable to access my emails. Any ideas why?

My setting were updated yesterday and since then I have been unable to access my emails. Any ideas why this has happened and how I can resolve the problem? I have checked my settings and they are all fine.

Since your settings were updated? Do you mean the iOS? Try this.
Quit the mail app completely. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Launch the mail app again.

I have multiple calendars set up but not all are displaying in iOS 7 notification center. I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary. Can't get it to show the details of the event. any ideas?

I have multiple calendars set up but not all are displaying in iOS 7 notification center. I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary. Can't get it to show the details of the event. any ideas?

have you tried rebooting your computer?

I cannot get FaceTime to work between my new iPad and my iMac any ideas?

I cannot get FaceTime to work between my 3rd Generation IPad and iMac, any ideas?

Not exactly sure about the iMac cause I don't have one. But the email being used on the iPad is at
Settings > FaceTime > You can be Reached for Video Calls at
Below that line there is an Apple ID which is the primary email address being used by the iPad. You can make changes there to change the email address.

HT4307 My screen is frozen on pogo games, unable to fix it, anyone have any ideas?

My screen is frozen on pogo games, unable to fix it, anyone have any ideas?

If your screen is frozen and you can't push the home button to return to the home screen, reset the phone by pressing the home button and the sleep/wake button on top simultaneously until the grey apple appears.
If the screen only freezes while you're using the app, you should delete and redownload the app.
If that doesn't help, you would need to contact the app's developers because apple doesn't support any apps that they don't make

I updated to ios5 on another computer because i was stuck on the recovery mode loop but now the problem is that when i try sync to my current one iphone does not show up or sync at all.. any ideas? gonna try uninstall right now..

I updated to ios5 on another computer because i was stuck on the recovery mode loop but now the problem is that when i try sync to my current one iphone does not show up or sync at all.. any ideas? gonna try uninstall right now..

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

Sudden Change to Slide Show Display/Presenter View Greyed Out

Two weeks ago powerpoint was acting normally. I would come into class, hook my netbook up to the projector, set my monitor output option to extended desktop and start my slideshow in presenter view. This morning I went into class and I was unable to use
presenter view. It was greyed out. I had to clone the displays and wing it without my notes. Also, the slideshow itself *looked* different. There was an orange menu bar at the bottom that I could not get rid of. Has this happened to anyone else?

Hi Michelle,
Do you mean the "Use Presenter View" option under "SLIDE SHOW" tab on the ribbon is greyed out for you?
When you are in the "Slide Show" mode, please try to right click on the slide and see if you can select the "Show Presenter View" from the context menu.
Have you ever made any changes to your computer recently? You might want to try installing any required updates, including updating your graphic card driver to the latest version, then try again.
"There was an orange menu bar at the bottom..." - Is it possible to share a screenshot of it with us? You can send the file to this email account:
[email protected] and inform us here (the email subject should be the link of this thread).
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Maps slide show: Unable to download Maps

I am trying to create a slide show from iPhoto 11 with Maps.
I have a few hundred photos. When I play the slide show, iPhoto errors out while downloading the maps - complains about connection to the internet.
I tried the photos in batches - 50/100 photos at a time and I don't have problems downloading the maps.
But there is only one photo that creates problem with downloading the maps.
The photo was taken near the Golden Gate Bridge in San Francisco - If I manually list the place as California, the maps download without a problem.
But if I use the GPS co-ordinates captured with the photo, when it was taken with the iPhone (or) if I list the place as San Francisco or say Kirby Cove or Golden Gate Park, it has problems downloading the maps.
How do I get around this issue?

They probably need to install this. It's free and it lets macs see .wmv files:
http://www.macupdate.com/info.php/id/17787/flip4mac-wmv-player
Another possiblity is that their version of flash is too old:
http://get.adobe.com/flashplayer/?promoid=BUIGP
Finally, you don't say which version of OS X they're using, but there have been imac models for well over ten years now, so their machine/operating system could also just be too old.

60D images not showing a thumbnail view in Bridge CS5..ideas?

I am having trouble seeing images in raw format from a 60D Canon in Bridge CS5. I have an iMac using OS X 10.9.4..any ideas why I can only see the white file, but can see all images in raw from 5D, 7D, 40D...etc. No updates show up as available on my computer or on the Adobe site. I just can't figure it out!
Thanks for your help.
-Alli

Make sure your ACR (Adobe camera Raw) plug-in is fully updated. That camera model has been supported since Adobe Camera Raw 6.2.
DO NOT rely on the Adobe auto updater to tell you that there are no updates available. It's totally unreliable in CS5 and earlier versions. The Adobe updater team overseas did not get their act together even halfway right until CS6.
Go into the About Plugin > Camera Raw… menu item in Photoshop to see what version of ACR you have. In CS5, ACR should be at version 6.7, more precisely at 6.7.1.
If you are already updated to ACR 6.2 or higher, then go to the Tools menu in Bridge and Purge Cache for the offending folder(s).

Slide show unable to view on a IMAC... any ideas?

Similar Messages

Maybe you are looking for