Slide size limit?

I am trying to use keynote to create a poster that is 4ft wide by 8ft tall(for a physics conference where that is the standard size). It seems like inspector limits me to creating slides that are 4000x4000 pixels (about 55.5"x55.5"). If I try to put in any value larger than 4000 it does not work. However if I open a powerpoint that is larger than 4000 pixels in one of its dimensions keynote doesn't seem to have trouble opening it and showing a value larger than 4000 in inspector.
Is there anyway to work around this size limit?

Hi pwbrenner,
You've confirmed my observation (that's why I'm searching on this topic). You can use Pages instead, as it will allow the larger sizes we seem to need. Although I imagine your conference is over by now!

Similar Messages

  • Is there a project size limit for Captivate 3?

    Hello,
    I'm using Captivate 3 and building a project that is currently approximately 19,200 KB.  I don't know if that's too large but as I continue to build, it seems to be acting funny like it's too big.  For instance, it closed on me without warning which it never did before.  Also it's taking longer & longer to prepare for previewing. My project is only about 1/3 finished so I'm concerned I'm going to get into more & more problems given its growing size. 
    I thought to break it into smaller projects and link them using the MenuBuilder but I haven't figured out a way to get back to this menu page from the project.  In Advance Settings of a particular menu item, I can select "Open link in the same window."  This happens but at the end of watching that linked project, I just get a blank screen.  If I "X" out of that project at the end of it using the "X" on the menu, I get a white screen. If I use the MS Window's "X", then everything closes included the menu preview window.  Is it possible to somehow use a button to get back to the menu page and not have a 2nd window open for the menu item that was selected? Or maybe I can keep building in a single project b/c there is no size limit?
    Thank you,
    Jeanne

    Welcome to our community, Jeanne
    Indeed Captivate 3 projects *DO* actually have a "size limit". But I'm unaware of any specific byte size that is to be concerned about. Typically we recommend folks keep projects at somewhere between 50-65 slides as a "rule of thumb" guideline for an upper limit.
    There are a great many factors that come into play with this. Things such as:
    Authoring PC Specifications (available memory, hard drive, processor speed, etc.)
    How many objects are on each slide
    Generally you are able to split things up and perform what is called a "Daisy Chain" approach. This is where one project ends and another is launched as the ending action. You may also specify that the end action for projects be to open the SWF that contains the menu.
    Hopefully this helps... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • "Convert Text to Table" Size limit issue?

    Alphabetize a List
    I’ve been using this well known work around for years.
    Select your list and in the Menu bar click Format>Table>Convert Text to Table
    Select one of the column’s cells (1st click selects entire table, 2nd click selects individual cell)
    Open “Table Inspector” (Click Table icon at top of Pages document)
    Make sure “table” button is selected, not “format” button
    Choose Sort Ascending from the Edit Rows & Columns pop-up menu
    Finally, click Format>Table>Convert Table to Text.
    A few days ago I added items & my list was 999 items long, ~22 pages.
    Tonight, I added 4 more items. Still the same # pages but now 1,003 items long.
    Unable to Convert Text to Table! Tried for 45 minutes. I think there is a list length limit, perhaps 999 items?
    I tried closing the document w/o any changes. Re-opening Pages & re-adding my new items to the end of the list as always & once again when I highlight list & Format>Table>Convert Text to Table .....nothing happens! I could highlight part of the list up to 999 items & leave the 4 new items unhighlighted & it works. I pasted the list into a new doc and copied a few items from the middle of the list & added them to the end of my new 999 list to make it 1003 items long (but different items) & did NOT work. I even attempted to add a single new item making the list an even 1000 items long & nope, not working. Even restarted iMac, no luck.
    I can get it to work with 999 or fewer items easily as always but no way when I add even a single new item.
    Anyone else have this problem?  It s/b easy to test out. If you have a list of say, 100 items, just copy & repeatedly paste into a new document multiple times to get over 1,000 & see if you can select all & then convert it from text to table.
    Thanks!
    Pages 08 v 3.03
    OS 10.6.8

    G,
    Yes, Pages has a table size limit, as you have discovered. Numbers has a much greater capacity for table length, so if you do your sort in Numbers you won't have any practical limitation.
    A better approach than switching to Numbers for the sort would be to download, install and activate Devon Wordservice. Then you could sort your list without converting it to a table.
    Jerry

  • Connection pool size limit error

    Hi all,
    I am trying to execute a BAPI function from MII, execution fails with the following message;
    [ERROR] Unable to make RFC call Exception: [Problem retrieving JCO.Function object: Connection pool <ECC_Server>:800:02:EN:ECCUser is exhausted. The current pool size limit (max connections) is 1 connections.]
    [WARN] [SAP_JCo_Function_0] Skipping execution of output links due to action failure.
    [ERROR] Uncaught exception from SAP_JCo_Function_0, Problem retrieving JCO.Function object: Connection pool <ECC_Server>:800:02:EN:ECCUser is exhausted. The current pool size limit (max connections) is 1 connections.
    Config:
    1. In 'SAP MII: Connections' of type JCO and have given pool size to 100.
    2. In 'SAP MII: Credential Stores' store is created and same is being used in Start Session.
    3. In  JCO_Function block, we can search for the Function Module and set it.
    MII Version:
    14.0.2 Build(82)
    Am I missing something?
    Has any one seen this? please advise.
    Thanks,
    Message was edited by: Shridhar N

    Check if there is another JCo connection configured with the same IP and User. I have found in the past that even though there are two connections configured because they have the same ip and user they are put into one pool with the lowest max pool of the two connections.

  • Is there a way to put more apps (increase the folder size limit) in iOS 5.0.1 on iPad2

    I read on some site that there is an app that allows one to increase the desktop folder size limit in iOS 5.0.1 on an iPad2 does anyone have any info please?
    Thanks for any thoughts in advance.....
    Dave

    Firstly, Thanks for taking the time to reply :-) 
    It's not that I want gazillions of apps, I just wanted to put more in each folder so I don't have to have multiple folders with similar names....Weather1, 2, 3,etc.... but I see your point and appreciate the thoughts.
    Dave

  • Since downloading the 2013 Keynote upgrade, the slide image size on handouts with 3 slides per page option is very small. Is there a way to make the slide size larger while still keeping 3 slides per page   lines?

    With the new Keynote upgrade (version 6.1), the slide image size on handouts is very small, which makes it difficult to read slide content when compiling lecture notes for students. Is there a way to make the slide size larger while still keeping to a format of 3 slides per page with lines?

    A number of posts have reported the same issue, two workarounds:
    1
    check the paper handling options or equivalent in your print dialogue box and set to scale to fit
    2 
    in the Keynote option, in the dropdown menu in the Print section, select Individual Slides
    then choose Layout, and set the number of pages, when printed you will have multiple pages on a single sheet.

  • How do I change the attachment size limit in Calendar Server 6.3, UWC, IWC?

    How do I properly increase or decrease the attachment size limit with Calendar Server and all supported user interfaces to it such as WCAP, UWC (Communications Express) and IWC (Convergence)? From my experience with the Outlook Connector, there seems to be some limit imposed by cshttpd on the size of a file upload (I believe I actually got an HTTP error code back on the wcap request indicating something was too big, sorry I don't have it handy, I'll have to re-test). Additionally, it seems UWC imposes additional limits (Example: http://docs.sun.com/app/docs/doc/819-4440/6n6jfgcjh?l=en&a=view&q=fileSizeHardLimit) but I can't seem to get those to work at all. I found many different web.xml related to UWC and I'm not sure which one to change, I tried a couple but had no success because UWC would always report this error if I uploaded between 4-5 megs: com.iplanet.jato.util.WrapperRuntimeException
    Root cause = [java.io.IOException: Request cancelled because file input field
    "importFile" size is over the configurable limit of 4194304 bytes; see filter init
    parameter fileSizeHardLimit]
    And it would complain about requestSizeLimit I think if it was over 5 megs, claiming that limit was 5242880. IWC gives a generic error when the upload is too big and rejects it.
    I fear that a 4 meg limit will be too imposing and of limited value, so I would either like to raise it, or consider lowering it to 0 bytes so attachments cannot be used at all. I have been looking high and low for information on how to do this and all I can find is the UWC examples. I plan to support the Outlook Connector, UWC, and IWC so the limits should ideally be the same across each. Some of the Exchange data we wish to import does have some attachments so it would be good to continue support for that. I did see some other posts about quota RFEs but at this point I am not concerned about the disk consumption. Can anyone help? Thanks. Please let me know if there is any more information I can provide. I am running SCS6u1 on Solaris 10 SPARC.

    Fred@egr wrote:
    Thanks!!! This is working with IWC and I am pretty sure it will work with Outlook. I didn't think to look at config options for mshttpd since I don't have it installed and ics.conf doesn't list the http.service.maxmessagesize and service.http.maxpostsize by default.http.service.maxmessagesize is only relevant to mshttpd, not cshttpd. service.http.maxpostsize applies to both.
    UWC is still limiting me though; I'm sure I can reconfigure UWC if I just know which file to edit and if I need to redeploy anything. I'm using the same install paths as the SCS6 Single Host example and I'm not sure which the "uwc-deployed-path" is supposed to be. Again, thanks.If you have deployed UWC/CE to Application Server you would edit the following file and restart application-server:
    /opt/SUNWappserver/domains/domain1/generated/xml/j2ee-modules/Communications_Express/web.xml
    e.g.
      <filter>
        <filter-name>MultipartFormServletFilter</filter-name>
        <filter-class>com.sun.uwc.calclient.MultipartFormServletFilter</filter-class>
        <init-param>
          <param-name>fileSizeHardLimit</param-name>
          <param-value>15485760</param-value>
        </init-param>
        <init-param>
          <param-name>requestSizeLimit</param-name>
          <param-value>15485760</param-value>
        </init-param>
        <init-param>
          <param-name>fileSizeLimit</param-name>
          <param-value>15485760</param-value>
        </init-param>
      </filter>Regards,
    Shane.

  • LabView RT FTP file size limit

    I have created a few very large AVI video clips on my PXIe-8135RT (LabView RT 2014).  When i try to download these from the controller's drive to a host laptop (Windows 7) with FileZilla, the transfer stops at 1GB (The file size is actually 10GB).
    What's going on?  The file appears to be created correctly and I can even use AVI2 Open and AVI2 Get Info to see that the video file contains the frames I stored.  Reading up about LVRT, there is nothing but older information which claim the file size limit is 4GB, yet the file was created at 10GB using the AVI2 VIs.
    Thanks,
    Robert

    As usual, the answer was staring me right in the face.  FileZilla was reporting the size in an odd manner and the file was actually 1GB.  The vi I used was failing.  After fixing it, it failed at 2GB with error -1074395965 (AVI max file size reached).

  • [AS3 AIR] 2880x2880 Size Limit, Camera, Filter, CameraRoll Issues & Finger Friendly Components

    AS3 AIR ANDROID
    I started playing with this Adobe AIR for Adroid by building an app that would let the user take a picture using the mobile device's native camera app.  Then, I'm applying filter effects to make the image look cool.  Then, I'm allowing the user to save the image back to the camera roll.
    Here are some questions that I have:
    KEEPING UP WITH CURRENT TECHNOLOGY
    Are we limited to the 2880x2880 stage size limit?  Although, this dimension does yield 8+megapixels, it's not in the ratio that most camera sensors are built (widescreen).  Plus, you can bet that newer cameras will have even higher dimensions.  Will this be updated to keep up with current technology requirements?
    IMPORTING & MANIPULATING CAMERA DATA
    Code
    var bmpData:BitmapData = new BitmapData($loader.width, $loader.height);
    bmpData.draw(DisplayObject($loader));
    bmp = new Bitmap(bmpData);
    bmp.width = Capabilities.screenResolutionX;
    bmp.height = Capabilities.screenResolutionY;
    if (CameraRoll.supportsAddBitmapData) {
        var cameraRoll:CameraRoll = new CameraRoll();              
        cameraRoll.addEventListener(ErrorEvent.ERROR, onCrError);
        cameraRoll.addEventListener(Event.COMPLETE, onCrComplete);
        var savedBmpData:BitmapData = new BitmapData (bmp.width, bmp.height);
        savedBmpData.draw(DisplayObject(bmp));
        cameraRoll.addBitmapData(savedBmpData);
    } else {
        trace("~" + "Camera Roll not supported for this device.");
    addChild(bmp);
    When you capture an image using the mobile device's camera app, you have to use the Loader object.
    So, here, I am doing just that with these steps:
    First, I'm creating a BitmapData object and sizing it the same as the camera image.
    Pass the camera image into the BitmapData object.
    Create a Bitmap object and pass in the BitmapData.
    Resize it to fit on the stage.
    Check for Camera Roll and then create a savedBmpData BitmapData object at the size of the screen.
    Pass in the bmp.
    Save it to the Camera Roll.
    The problem is that when the image is displayed on the phone, it shows THE ENTIRE (uncropped) image.  However, the image that is saved to the phone is only the top 800x480 corner of the image.  What is wrong?  How do we save an image to the Camera Roll that is larger than the display area of the phone.  It seems like the only way to save the entire camera image is to resize it to fit the stage and then capture the stage into a bitmapData object.
    FILTERS
    If you apply any filters to the bitmapData object, the filter effects will display on the phone, but if the image is saved to the Camera Roll, then all the filters are lost and it only saves the original (unfiltered) image.
    FINGER FRIENDLY UI COMPONENTS
    Do they exist?
    ADDITIONAL NOTES
    The max image size that can be saved is 2039x2039 pixels on the HTC Evo.  Anything bigger than this resulted in a CameraRoll Error #1 (which there is no documentation for what that means ANYWHERE on the web).

  • Change slide size in 2 slide/page layout?

    Several folks indicated that you can use the "layout" view to produce a handout with 2 slides per page. But there is still quite a bit of white space. How can you increase the slide size on the page to make them bigger? Also, is there a way to add page numbers to the page (I already have slide numbers).

    Rocketscience,
    welcome to the Keynote Discussions.
    Well, I think the border around the two slides I print is just enough to punch and file the paper.
    Oh, wait, I'm using [DIN] A4 format. Well, try this:
    * In the print dialog choose Layout from the "Copies & Pages"
    dropdown box and set "Pages per Sheet" to 2
    (you know that but I repeat it for other readers)
    * Choose Paper Handling from the same dropdown box and mark
    "Scale to fit paper size:". Select A4 from the corresponding
    dropdown box (yes, even if you don't use A4 format). Unmark
    "Scale down only".
    * Print you slides.
    There's no possibility to add page (sheet) numbers in the print dialog. You could prepare a file in Keynote or Pages that only prints a page number and print these numbers in a second run on you handouts. Not very elegant but maybe better than to paginate with a counter

  • HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

    How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

    You can't change it, and I suspect few email providers would allow a file that big.  Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

  • FILE and FTP Adapter file size limit

    Hi,
    Oracle SOA Suite ESB related:
    I see that there is a file size limit of 7MB for transferring using File and FTP adapter and that debatching can be used to overcome this issue. Also see that debatching can be done only for strucutred files.
    1) What can be done to transfer unstructured files larger than 7MB from one server to the other using FTP adapter?
    2) For structured files, could someone help me in debatching a file with the following structure.
    000|SEC-US-MF|1234|POPOC|679
    100|PO_226312|1234|7130667
    200|PO_226312|1234|Line_id_1
    300|Line_id_1|1234|Location_ID_1
    400|Location_ID_1|1234|Dist_ID_1
    100|PO_226355|1234|7136890
    200|PO_226355|1234|Line_id_2
    300|Line_id_2|1234|Location_ID_2
    400|Location_ID_2|1234|Dist_ID_2
    100|PO_226355|1234|7136890
    200|PO_226355|1234|Line_id_N
    300|Line_id_N|1234|Location_ID_N
    400|Location_ID_N|1234|Dist_ID_N
    999|SSS|1234|88|158
    I would need a the complete data in a single file at the destination for each file in the source. If there are as many number of files as the number of batches at the destination, I would need the file output file structure be as follows:
    000|SEC-US-MF|1234|POPOC|679
    100|PO_226312|1234|7130667
    200|PO_226312|1234|Line_id_1
    300|Line_id_1|1234|Location_ID_1
    400|Location_ID_1|1234|Dist_ID_1
    999|SSS|1234|88|158
    Thanks in advance,
    RV
    Edited by: user10236075 on May 25, 2009 4:12 PM
    Edited by: user10236075 on May 25, 2009 4:14 PM

    Ok Here are the steps
    1. Create an inbound file adapter as you normally would. The schema is opaque, set the polling as required.
    2. Create an outbound file adapter as you normally would, it doesn't really matter what xsd you use as you will modify the wsdl manually.
    3. Create a xsd that will read your file. This would typically be the xsd you would use for the inbound adapter. I call this address-csv.xsd.
    4. Create a xsd that is the desired output. This would typically be the xsd you would use for the outbound adapter. I have called this address-fixed-length.xsd. So I want to map csv to fixed length format.
    5. Create the xslt that will map between the 2 xsd. Do this in JDev, select the BPEL project, right-click -> New -> General -> XSL Map
    6. Edit the outbound file partner link wsdl, the the jca operations as the doc specifies, this is my example.
    <jca:binding  />
            <operation name="MoveWithXlate">
          <jca:operation
              InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
              SourcePhysicalDirectory="foo1"
              SourceFileName="bar1"
              TargetPhysicalDirectory="C:\JDevOOW\jdev\FileIoOperationApps\MoveHugeFileWithXlate\out"
              TargetFileName="purchase_fixed.txt"
              SourceSchema="address-csv.xsd" 
              SourceSchemaRoot ="Root-Element"
              SourceType="native"
              TargetSchema="address-fixedLength.xsd" 
              TargetSchemaRoot ="Root-Element"
              TargetType="native"
              Xsl="addr1Toaddr2.xsl"
              Type="MOVE">
          </jca:operation> 7. Edit the outbound header to look as follows
        <types>
            <schema attributeFormDefault="qualified" elementFormDefault="qualified"
                    targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
                    xmlns="http://www.w3.org/2001/XMLSchema"
                    xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
                <element name="OutboundFileHeaderType">
                    <complexType>
                        <sequence>
                            <element name="fileName" type="string"/>
                            <element name="sourceDirectory" type="string"/>
                            <element name="sourceFileName" type="string"/>
                            <element name="targetDirectory" type="string"/>
                            <element name="targetFileName" type="string"/>                       
                        </sequence>
                    </complexType>
                </element> 
            </schema>
        </types>   8. the last trick is to have an assign between the inbound header to the outbound header partner link that copies the headers. You only need to copy the sourceDirectory and SourceGileName
        <assign name="Assign_Headers">
          <copy>
            <from variable="inboundHeader" part="inboundHeader"
                  query="/ns2:InboundFileHeaderType/ns2:fileName"/>
            <to variable="outboundHeader" part="outboundHeader"
                query="/ns2:OutboundFileHeaderType/ns2:sourceFileName"/>
          </copy>
          <copy>
            <from variable="inboundHeader" part="inboundHeader"
                  query="/ns2:InboundFileHeaderType/ns2:directory"/>
            <to variable="outboundHeader" part="outboundHeader"
                query="/ns2:OutboundFileHeaderType/ns2:sourceDirectory"/>
          </copy>
        </assign>you should be good to go. If you just want pass through then you don't need the native format set to opaque, with no XSLT
    cheers
    James

  • Slide Size Mysteriously Changed

    Hi,
    I was working on a slide presentation and all of a sudden I noticed in Navigotor mode the thumbnail pictures of the top 2 slides were scrambled and undistinguishable. Then I noticed that the thumbnails seemed smaller for some reason and wondered if I just imagining it. Then, once I closed the document, chose not to save it, reopened... there was a left and right strip of white or "blank" margin on both sides of all of my slides and of the navigator thumbnail pictures were a little smaller in addition to the additional white margins that made them even smaller.
    I first went to my "Document Inspector" and wanted to see if I could figure out what might have changed with the slide size but didn't see anything that might cause this to happen.
    Is it possible my file became corrupted somehow and now I have to rebuild my whole presentation to remove the white borders and restore proper size to my presentation?
    Any help is greatly appreciated. Thank you.
    Steve

    The file is acting as if the slide resolutions were inadvertently increased. This may be a symptom of corruption. You should be able to copy the information off of the slides, but I'm not sure there is a single fix to remedy the situation. Any material that is based on an object on the slide Masters (such as the title box and body box) can be changed across the entire presentation by changing those items in the relevant Masters. Perhaps someone else has run across this and has better advice for recovery.

  • Slide size and cropping

    If I produce a presentation based on my standard screen resolution (1680 by 1050) and then use a projector which as I understand is 4:3 proportion how is the screen/slide cropped? If I set my slide size to 1200 by 900 then I can see what will happen. But what if my slide size is say 1680 x 1050? Will the slide get squashed or cropped? Or will the black screen area surrounding the slide change width?
    Thanks
    17" Powerbook 2.16 Intel Core Duo   Mac OS X (10.4.8)  

    Your projector will be 1024x768 (probably). Use that to set up your slideshow when you program it, AND crop your pix to the right pixel dimensions. That way your processor has to do as little as possible when you present, and the effects are as fast and smooth as possible. On your laptop, it will fill the height of the screen and crop the sides. (Set it in the prefs). It will be sharper on the projector than on the laptop, 'cos the projector is working at its native resolution, but the laptop is resampling.
    N

  • Slide Size = ? Aspect Ratio

    Does anyone have any idea as to what aspect ratio a 1024 X 768 slide in Keynote is? I have a projector that the aspect ratio can be changed. My issue is that I don't know what size screen I need for the projector? They are available in 16:9, 1:1, and 4:1 aspect ratios. My presentation has been created in a 1024 X 768 slide size. I realize I can change that but would rather not as the 1024 X 768 slide size seems to be the best to have the type clean and visible.
    Thanks in advance if you know.

    You also need to know the lens zoom factor and the position of your projector. This will determine the size of the screen. The aspect ratio of the screen should be the same as the aspect ratio of the projector: Projecto 16:9 - Screen 16:9.
    In terms of font size that is easy to read, that largely depends on the distance between the viewer and the screen. Rule of thumb is that the closest person shuold be 0.7 x the height of the screen (9' high screen = 6.3' to the front row of seating) and the furthest should be no more than 7 x the height of the screen (9' high screen = 63' to the last row of seating). This also depends on the content shown. So for slides with fine details (lot of small text, busy slides) maximum distance should be no more then 4 x height of the screen. 6 x for spreadhseet and up to 8 times for video and images.
    Hope this helps.

Maybe you are looking for