Slide to unlock wont work

My slide to unlock wont work on my iphone 3gs.I have tried to reset it. It won't slide to power off. It won't let me answer calls or texts but I can adjust the volume on the side buttons. Please help.

Okay--listen everyone--I actually have a fix for this.  I am so happy to help, because I know how frustrated I was!
I have a iPod touch 3rd gen.  The screen slide was stuck in the lock position.  Over the course of the past three months I have tried the following with no success:
1.) Reboot (holding the power and home button simultaneously)
2.) Restore (both types--yes, I did the hard, factory reset) SEVERAL times.
3.) I pushed on the screen in every corner, sometimes very hard.
4.) I tried giving several voice control commands.
Everything I read on line (I've spent several hours researching), said the only thing I could do was bring it in to the Apple Store Genius Bar--they priced the labor at about $150!  For which I could buy a new one.  Then I remembered something CRAZY I had read a while back--I wasn't even sure I remember the correct order or even the explanation.  All I know is that it WORKED!  This is what I did.
a.) I put the iPod in a ziplock bag and pushed all the excess air out before sealing it.
b.) I put it in the freezer over night!  (Crazy, right?)
c.) Then about 24 hours later, I took it out--it was frozen solid--and tried to power it up.  No luck.
d.) I immediately put it under the hair dryer on high heat, high air.  About 20-30 seconds from, then the same for the back. 
e.) I tried to power it up; the Apple icon appeared!
f.) While it was powering up, I kept the air on it, rotating front and back--It got hot.  (I stopped after 1 minute.)
g.) When the home, configure screen reappeared, I was able to slide the slick, and re-configure!
h.) I've restored a previous back-up off my iTunes account, and the iPod is working again.  Resurrected!
If memory serves, the explanation I read is that many of the apply devices have an internal shutdown switch before they fry or freeze in extreme temps.  My guess is that the shutdown forces and internal reboot.  All I know is that after trying EVERYTHING ELSE--this method worked.  I did this on 18 October 2014.
--Nathan

Similar Messages

  • I have a old ipod 3rd generation and today the toch screen wont work and the slide to unlock wont work really need help i dont want to reset it because it has information on it that i really need

    I have a ipod touch 3g the touch screen wont work but everything else do slide to unlock dosent work cant reset it need help immediaty need info off of it

    Try this: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears

  • My slide to unlock wont work  help

    my iphone slide to unlock wont work

    TJBUSMC 1973 - I had thought that all of your comments were very sensible but I have has the same problem that deuce78 had. Bought a new iPad 2 just before Christmas, managed to set it up with passcode etc and now everything has frozen. Tried everything within my limited knowledge and was unable to resolve. Phoned Apple helpdesk and a gentleman be told that yes, they would be able to help with a reset as and asked me to wait for a minute or so. When he returned he told me that I would need to pay around £80 for a twelve month software support package. I told him that I do not want this, just an answer to the problem that I was having with a brand new product. He categorically told me (and I am being totally honest here and not exaggerating) that in that case he could not help me. I stressed that it is a brand new iPad and that I had added no apps or software, it had just stopped working on the first day that I tried to use it and that surely if they could talk me through a solution they should do so free of charge. To this there was a straight no, I asked if there were any other options or another number that I could ring, and again was told no.
    So which is the truth that will set us free?
    I am off tomorrow on a 30 mile round trip to the Apple store to get my iPad replaced when it sounds like it could have been sorted over the phone!

  • Cannot unlock phone swipe to unlock wont work can only swipe up for control pannel and camera but no buttons will work cant even turn off and on as it wont work

    iPhone 4S. Swipe to unlock wont work can only swipe up for control pannel and camera but no buttons will work cant even turn off and on as it wont work. cannot restore iphone either as it wont let me.

    Hey Angus97,
    These are the recommended troubleshooting steps to take when you are unable to Slide to Unlock:
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    from: iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • How do i fix my ipod touch 4g? on my lock screen my (slide to unlock) wont move when  i run my finger over it.

    how do i fix my ipod touch 4g? on my lock screen my (slide to unlock) button wont work when i slide my finger over it.

    Turn off, and then turn on your iPod. Restart it

  • Have to lock twice...in order for "slide to unlock" to work!

    I have not found anything similar to my issue so I'm posting this hoping someone can help me!
    My iPhone 5S works fine, however I have the following situation...
    When I hit "Home" to unlock, I will get the "Slide to Unlock" message, but the screen is non-operational.  I cannot slide to unlock, use the camera, nothing works.
    I have to "Lock" the phone again and then hit "Home" again.  Now everything works...
    This is the same everytime...first time I try to slide to unlock, the phone doesn't work at all.  I have to re-lock andn then hit home again to get it to work.
    Any ideas on what I need to do?
    Thanks!

    I believe this matter needs clarifying.
    The computer DOES NOT need to be on for homesharing to work.
    Obviously if the computer isn't on then any services on the Apple TV which rely on homesharing to the computer, such as playing content from the iTunes library will not work, but homesharing with any other device WILL continue to work.

  • Slide to unlock doesnt work

    when i slide to unlock it doesn't do anything i am only able to answer calls through my bluetooth headset. When i turn my phone off and then on and it asks for my passcode only the numbers 1-6 work. can anyone help?

    ok i would try a system restore in itunes
    dont worry u should have a back up of ur phone on ur pc and all ur music soo u wount lose anything
    but if that doesnt work u might contact apple or go to a apple store

  • Slide to unlock not working but I can slide to answer calls (power button broken) HELP!

    Can anyone please help? 24 hours before my upgrade is due and my iPhone 5 has decided it won't let me slide to unlock...I can slide to answer a call no problem weirdly so Im thinking it isn't a fault with that part of the screen? My problem is compounded by the fact that the power on/off button hasn't worked in a while. this hasn't been a major issue until i am now trying to at least back up and then restore my phone. I can't enter the passcode to restore it! And i can't try lots of the suggestions I've seen which is holding the home and power button together as my power button doesn't work. I can't even sell the phone as faulty at the moment as i have no way of getting all my data off it!

    Take the device to Apple to address the hardware issue.

  • Slide to unlock not working

    Ipod 2nd Generation, Slide to unlock is not working - Ipod is not reponding to "sliding".  I've tried a soft reset but it still won't slide to unlock.

    You probably encounter the same problem then mine. The problem is not hardware but software due to a bad update by Apple. MIne was working perfectly... I repeat perfectly... No bugs and no problem at all and just after I decided to update the OS it stop working!
    I did try all those tricks... restore, factory restore,... even go to the App Store where they tried to push me to buy a newer product or to pay for a fictional repair since the issue is not physical. It doesn't have a scratch or even a single drop of liquid... It was a careless update. A way to push people like me and you to throw their old iPod Touch into the garbage. The only solution will be to find an older OS but it seems to be impossible to find.
    For sure I will never buy a Apple product again !

  • TS3274 my ipad slide to unlock wont respond

    my ipad "slide to unlock" will not work for some reason, have tried connecting to computer, still no luck. anyone know whats wrong

    Try rebooting the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Iphone5s.slide to unlock doesnt work

    Iphone 5s slide to unlock hangs some times

    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Ipod "slide to unlock" wont slide

    i restored my ipod because the slidebar wasn't sliding , and it still wont work .

    Restore to factory defaults/new iPod if you have not already. If you still have the problem then it appears that you have a hardware and an appointment at the Genius Bar of an Apple store is in order.

  • My new Iphone 4 will not SLIDE TO UNLOCK.  Worked when i left the store yesterday not this morning.

    I can't get in to the phone.  Bought it yesterday at the ATT store, worked, went home loaded apps and what not, worked, played a game, worked.  Slept alarm worked in the morning,  used Stitcher app on the way to work.  at work at about 8 am would not unlock.
    Iphone 4 8g.
    When i try to power off the slide to turn off does not work either.

    Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo. 

  • My iPhone "Slide to unlock" doesnt work?????

    okay so just now i tried to slide the button so my phone will take me to the home menu. it wont respond. and i looked online and pepole were saying oh turn it off that will help. but you have to slide a button or push something to make it go off and i cant do that. what do i do>>????????:???????

    Try a hard reset
    That's called a phone reset.  There is no "hard" (or "soft") reset in iPhone terminology.  See the User Guide, Appendix B.  The on/off and home buttons should be pressed for at least 10 seconds.

  • Ipad will work when you hit home and then slide the unlock bar - then when you get to the homepage, nothing works - not the home button, it wont rotate, scroll, cant choose icons...nothing.  help!

    Ipad will come on when you hit home and then slide the unlock bar works fine - then when you get to the home page where the icons are, nothing works - not the home button, it wont rotate, scroll, cant choose icons...nothing.  help!

    The home button is the main button off the screen - where is the sleep button?  When I hit home I only see the lock slider (its black) and a button that has a flower on it that pulls up photos we took that are on the ipad.  Thanks for your help!

Maybe you are looking for

  • TNS  Listener error in Obiee 11g

    Hi folks, I am struggling with one in Obiee11g . whenever login into the presentation services(http://localhost:9704/analytics), im getting ,username and password nt authenticated . i saw error msg in the server.log file. Error msg is : Received exce

  • "Firefox is already running" error

    I am running Windows 7 with 3 different user profiles, all of which run Firefox seamlessly, but one. I have tried the different options listed on the main forum for this; however, the issue persists. I have uninstalled and reinstalled the application

  • Mail subject search is not finding All copies why?

    mail 6.3 using a subject search (in the small spotlght)  - is not finding All copies in my folders and subfolders why? I have done indexing for all mail folders and that did not correct it.

  • How to improve the performance of extractor?

    Hi, we have an extractor for which data loading is taking too much of a time! It is taking 5 hours for loading where as the same extractor in different source system  ( different client )  is doing this load with in an hour. what one can do to improv

  • Export from Mac A/import to Mac B?

    I want to download to Mac A where I have cable available, and merge the resulting labrary onto my main library on Mac B at home. The help files are hazy on export and import libraries. Is it as simple as download to Mac A, export to xml file, load xm