Slide transition animation and image in the slide master

Hi,
I placed an image in one of the slide masters, because I want that image static in the slide background. But when I add a transition to the slides made with that master, the image I placed is animated too. Should I do something else in the slide master so the image I placed is not affected by the slide transition?
Macbook Pro Retina with OS X Yosemite and Keynote 6.5
Regards.

There is no such thing as an object transition, objects are animated using Builds or Actions:   Inspector > Animate
I'm referring to "Object Effects" in the Transitions pull down (Object Push, Object Revolve, Object Flip, etc). So yes, technically there is an Object (transition) effect where objects transition between slides.
Backgrounds do not animate when using Builds or Actions.
True. However, if you use the last version of Keynote (before 6.5 and the Yosemite update) and place an image on the master slide it will not animate when applying many of the Object Effects.
When an action or or Build is applied to an objet, the slide or the background does not animate, only the object animates.
Same point as I made above.
No EnzoFT said,  "when I add a transition to the slides made with that master, the image I placed is animated too."
EnzoFT was using a slide transition therefore any object on a slide will be included in the effect.
If you try what I said above in the previous version of Keynote, it will not animate. However, I found out how to make an image on the master slide NOT animate in Keynote 6.5 (I made a comment earlier in the thread about this). Open the master slide, select the Slide Layout, change the background to Image Fill, and the image won’t animate from one slide to the next when you apply an Object Effects transition to a slide.
That is a very narrow minded personal opinion.
Selecting a transition, Build or Action should be based on how it enhances the presentation and what you want to animate; the slide, the object or both.
Narrow minded personal opinion?!? Do you really need to go there? I was simply making an observation.
Use Builds or Actions.
There has been no change;  Transitions affect the whole slide, Builds and Actions affect objects on a slide.
If you try what I mentioned above there has been a change. Thanks for offering advice, but doing a little research in the future before replying to issues will help with providing more accurate information.

Similar Messages

  • How can I send a copy of my Keynote Presentation to someone else so that it will include my slide notes (uploading it to iWork seems to exclude my notes and only shows the slides). A quick response would be greatly appreciated!

    How can I send a copy of my Keynote Presentation to someone else so that it will include my slide notes (uploading it to iWork seems to exclude my notes and only shows the slides). A quick response would be greatly appreciated!

    I'd try Dropbox (http://www.dropbox.com/), which you and your recipient both have to have. It's easy, and the free version would probably be enough. There are any number of other services available for emailing large files (google that). Of course, your recipient must have KN installed to be able to view it correctly, or can view it in PP, but with some loss, primarily transitions/animations.

  • All my icons are enlarged, how do you get them back to the regular size so you can see them all and you have the slide bar to get into it?

    all my icons are enlarged, how do you get them back to the regular size so you can see them all and you have the slide bar to get into it?

    This is asked and answered often.  The forum search bar is on the right side of this page.
    It is also covered in the manual - zoom feature.
    iPod touch User Guide (For iOS 4.3 Software)
    Double tap with three fingers

  • How can I combine a lot of text and images on the same screen?

    How can I combine a lot of text and images on the same screen?  I can get a couple of words on the screen with a graphic but not 10 lines.  I need 10 lines on the page with the image. 

    Priscilla,
    I routinely combine 10 lines of 36 pt bible or lecture text to a suitable background using Boris Title 3D.
    Many times the text is too long to fit the screen using Boris, so I devide it into 2 or more parts with no transition between sections.
    In my case, the text is on the screen as the speaker quotes them.
    David

  • Text and images in the same component?

    Ok... a lil help please :
    into what component can i put text and images at the same time
    as in...
    example, what component could contain data like this :
    Hello this is me <imageofmyself> and this is my house <imageofmyhouse>... bye all !
    thanks in advance,
    Jonathan, a.k.a. Kyraz

    You could use a Swing HTMLPANE or draw it all onto a
    BufferedImage and display that (code posted under 2D graphics thread).
    MArk

  • Dynamic pdf up to 200 images, the size of pdf is larger, cannot save data and images to the form

    Hi all,
    My client would like to dynamic images up to 200 pictures to my forms. It is working fine. However, when I add images up to 35 images. I could not add images to the form any more. Then, I save data on the form. All images and data typed on the form are disappeared. I don't know reason.
    If I only add 10 images - I can save data and images on the form. The size of pdf is 15456 kb.  I was unable to  add more pictures or data on the form.
    Maybe there are problem the size of pdf? How much size can an dynamic pdf  limited?
    Can we save the information and images as much as we want?
    I have spent 2 weeks to work and try to figure out this problem. However it is not successful.
    Please help,
    Cindy

    You should ensure, that your users do not import big images.
    Therefore you can use a script on the change event of an image field which checks the data size and warns the user if the file is too big.
    function formatNumber(number) {
        var num = number + '',
        x = num.split('.'),
        x1 = x[0],
        x2 = x.length > 1 ? '.' + x[1] : '',
        rgx = /(\d+)(\d{3})/;
        while (rgx.test(x1)) {
            x1 = x1.replace(rgx, '$1' + ',' + '$2');
        return x1 + x2 + "KB";
    var sizeLimit = 200, //allow upto 200KB images
      thisSize = Math.round((this.value.oneOfChild.value.length * 3 / 4) / 1024);
    if (sizeLimit > 0) {
      if (thisSize > sizeLimit) {
      xfa.host.messageBox("Note: With " + formatNumber(thisSize) + " the size of the imported image is greater that the recommended maximum of " + formatNumber(sizeLimit) + ".\nLarge images can cause a insufficent performance.\n\nIf possible, use images with the following recommended specs:\nFormat:\t\tPNG or JPG\nColor depth:\t8 Bit (higher is not supported)\nColor space:\tRGB (CMYK is not supported)\nFile Size:\t\t" + formatNumber(sizeLimit), "Recommended image size exceeded", 3, 0);

  • Servlet: send back text and images to the requester

    Hi,
    I need some help about servlet responses.
    I want to send back some text (and maybe some images) back to the requester after a POST request.
    Can you give me some tips ?
    thanks

    aneuryzma wrote:
    I want to send back some text (and maybe some images) back to the requester after a POST request.
    Can you give me some tips ?Tip: Make up your mind. You can only send one thing as the response. If you want to send text, then send text. If you want to send an image, then send an image. In any case you should set the content type to indicate what you're sending.
    You can only send a mixed bag of text and images in the unlikely case that you've defined your own content type along with a client which understands it. Or if you zip them all into a zip archive, or something like that.

  • How can I erase the residual background text and images from the backside of a scanned page?

    How can I erase the residual background text and images from the backside of a scanned page?
    Also, I wanted to know what each subscriptions included as far as my question above is concerned?
    I am trying to edit a scanned page (pdf file) by changing some words and erasing the background from the page that is showing through it since the paper is so thin and want to know which subscription to buy in order to complete these tasks?

    This cannot be done in Reader. I think you will need software like Photoshop. You may be able to get buy with Photoshop Elements, but I haven't used recent versions of that software. Using either software this will not be an automated task.

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • Animations and widgets fade inbetween slides without being told to.

    Hi,
    I've been having recent problems with Captivate 4 - I've been using custom widgets and animation with the intent to have them follow through seperate slides (visually at least). However, at the end/start of each slide they will fade, even though I haven't specified them to do so.
    I have chosen the "no transition" properties in their respective properties dialogs, and I have made sure there is no transitions between slides. Yet it still does it.
    I never had this problem with Captivate 3...
    Does anyone else have this issue?

    Hi Bacon
    It seems that the 'No Transition' option doesn't work when using widgets. By far the easiest solution seems to turn on 'fade in and Out' and set the 'fade in' and 'fade out' times both to 0.0 .
    You will still end up with a 1 frame flash of white at the start of the slide (as this seems like it is the time needed for captivate to load the widget) the solution for this is to put a static bitmap (jpg, png etc) of the widget on this first frame (with no transitions on the image and slide)
    I hope this helps.
    Cheers
    Aquil0

  • Airplay does not work with slideshows and music - get the slides but no music with iPad Air2 and ios 8.1.22

    iPad Air 2 with celluar with ios8.1.2 will not airplay with apple tv slideshows with music. I see the slides on the TV but do not hear the music. This works on the iphone 5s with iOS 8.1.2 and with my other iPad which is on iOS7.
    This problem was reported on Nov 21, 2014 and other people had reported it prior to me.
    When will this be fixed by Apple - it worked in the past and does not work now.
    Should i return my iPad Air 2 and get my money back?

    Problem seems to be resolved. Should have thought of it myself ;-) thanks so far!

  • Message about iCloud backup and it won't clear.  It also won't allow me to do anything else.  iPad. It is plugged in and now locked, the slides for getting in and the power off don't work, but the message stays.  I have hit ok numerous times.

    Message about iCloud backup and it won't clear.  It also won't allow the iPad to do anything else.  It is plugged in and now locked.  The slides to open iPad and the one to power off do not work.  I have the iPad plugged in and have pressed ok on the message numerous times.

    Welcome to the Apple Community.
    Try restarting the iPad and seeing if that helps.
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

  • Scroll Slider for  text and image

    I have been looking to improve on a text only news scroller I
    have on my
    website and introduce one which scrolls up text with an
    associated image.
    There is one on the Goal.com website which is quite cool. It
    pauses too.
    Does anyone know of a tutorial or available script so I can
    incorporate a
    scroller like this. see
    http://www.goal.com/en/ It takes
    a couple of seconds
    before the forst large image under the Goal.com logo scrolls.
    Kind regards
    Andy Humm

    Hi Gopi,
    I working on similar requirement.Let me know how were your able to resolve the issue
    Kiran

  • How to use an animated .GIF image as the texture in Cp4 ?

    Hello all
    I wish to create an animated banner and use it as the texture in Captivate 4.
    As I know texture supports only image formats( JPEG, PNG, GIF,etc). So, I have created a small animation in Photoshop and saved in GIF format and used it as the texture. But when I preview the movie it is displayed as an image but not the animation.
    Is there any solution for this problem?
    Kind regards,
    Kartik Pullela

    1. Instal this package: http://nugetmusthaves.com/Package/WpfAnimatedGif2. Use the code below:
    <Window x:Class="WpfAnimatedGif.Demo.MainWindow"xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"xmlns:gif="http://wpfanimatedgif.codeplex.com"Title="MainWindow"Height="350"Width="525"><Grid><Image gif:ImageBehavior.AnimatedSource="Images/animated.gif"/></Grid>I found this on: http://wpfanimatedgif.codeplex.com/, and this is the useful solution because <MediaElement /> doesn't show the .gif image, and that's pretty strange.

  • Need text and image in the message

    Hi,
    I need to send an email with an image and text as part of the message, Ill do the following but it jsut takes the text and as an attachment, how can I include both content in the body of message??
    BodyPart texto = new MimeBodyPart();
    texto.setContent(fichero, "text/html");
    multipart.addBodyPart(texto);
    // Procesar la imagen
    MimeBodyPart imagen = new MimeBodyPart();
    imagen.attachFile("C:/Documents and Settings/Administrador/Mis documentos/Sandra/epinuevo/web/imagenes/logo150px.jpg");
    imagen.setHeader("Content-ID", "<figura1>");
    MimeBodyPart imagen1 = new MimeBodyPart();
    imagen1.setText("Sandra");//.attachFile("C:/Documents and Settings/Administrador/Mis documentos/Sandra/epinuevo/web/imagenes/logo150px.jpg");
    imagen1.setHeader("Content-ID", "<nombre>");
    multipart.addBodyPart(imagen1);
    message.setContent(multipart);
    Thanks!!

    Milene wrote:
    bshannon wrote:
    If you're still having trouble, you can find a message created by some other
    program that has the overall structure you want, and then copy its structure.I dont understand what do u mean exactly.You want your message to look and behave a certain way.
    Find another message (with different content), that looks and behaves similarly to what
    you want. Perhaps you can create such a message using another mailer. Or perhaps
    you've received a message from someone else that is similar to what you're trying to do.
    Then, look at that message using the "view source" function of your mailer. You'll see all
    the MIME headers, etc. You can then use a similar MIME structure in your message.
    You'll also see the content of the body parts and how the content references images and
    URLs. Use a similar technique in your message.
    But I was trying to include the image and the text as 2 different MimeBodyPart, now I found a simple solution I add html code as part of the message where there is a reference to the image, all the text in in the code.
    But now I have a problem cause I have in that html code an URL as an > but when i recieve the mail the url doesnt work, is there any other funciont to add urls in a special way???
    A URL reference like "xxxx.jsp" is implicitly relative to the html page containing the reference.
    When you include the html content in a mail message, the reference is relative to the mail
    message. That's not what you want. You want the reference to point to your web site. The
    simplest solution is to just use a reference like "http://myserver/myurl/xxxxx.jsp".
    Note that viewing html in a mail message is not exactly the same as viewing html on a web
    page. Different mailers will impose different restrictions on what you can do in the html in a
    mail message.

Maybe you are looking for