Slide Views Measurement/Analytics in Adobe Learning Dashboard

There is a metric to track completion by percentage of slide views, but I can't seem to find the straight metric "# of slides viewed." Is there a setting that I am missing, either in the dashboard or in my project to enable this reporting?
Thanks,
Michelle

Hi Michelle,
There is some data inconsistency.
First time you created the module was taken by first learner(Michelle Iracane), there was no quiz.
Next time for other learners the module had quiz.
Our recommendation :
Each time you change some content in your presentation, please re-register the module.
I have sent a video on how to re-register a module on your registered AdobeID
As of now steps you can do to get proper details:
1) Re-register the module
2) Publish it
3) Let few learners take the module
4) Create a course from course settings in learning dashboard
5) View the results.
If you encounter any further issues, you can use "Contact us" feature in Learning Dashboard.
Thanks,
Krupesh
([email protected])
Learning Dashboard Team

Similar Messages

Definition of Terms on Adobe Learning Dashboard

What is the difference between a learner status of "In Progress" and "Incomplete?"
What causes a learner to be defined as "Needs Intervention?"
In my experience/test run, a learner who is in the process of taking the course (actively has it loaded and is going through) is concurrently defined as "Incomplete" and "Needs Intervention" which seems odd to me, since that learner just launched the course and is in the process of taking it.
Thanks for any insights!

These are 2 different aspects,
learner status as "In Progress" and "Incomplete" is shown module wise
and "In Progress" and "Needs Intervention" is shown as per status of full course
Please find the details of both below:
Following is difference between "In Progress" and "Incomplete": (in reference with Students ->Group Graph)
- If the user takes the module before Delay date and has not completed it yet - User will fall in "In Progress" group
- If the learner visits module after delay date and the module does not complete the module he will fall in "Incomplete" group
- If learner never visits the module after delay date he will remain in "In Progress" group
Need Inetrvention criteria is set while creating the course by switching on/off the options of "Low Participation" "Quiz Fail" and "Incomplete"
Following is difference between "In Progress" and "Needs Intervention": (in reference with Overview -> Student Progress Graph)
- All students who have not completed the course before Needs Intervention date are in "In Progress" group
- All students who did not complete atleast one module before Needs Intervention date but visits any module of the course after Needs Intervention date are moved to "Needs Intervention" group
- All students who did not complete atleast one module before Needs Intervention date and does not visit any module of the course after Needs Intervention date remain in "In Progress" group
I hope this answer clears the query!
Message was edited by: Anamika_G

Adobe enterprise dashboard dont view package

Hello everyone,
I am rising to the Adobe enterprise dashboard console and let me know how do I create the packages and that you can see in the dashboard , deployment .
On the other when joining the tab identify identity achievement not validate the domain of my company .
Thanks, help you.

i changed some parameters in rpd and the problem resolved.

Slide views only to be reported, but grade is reporting to lms as 0 instead of n/a

My client has a number of quiz questions throughout their course. They asked that the quiz be set up to allow infinite attempts until the learner gets the answer right, and that there are no points or grade associated with the quiz. I've set up each question as a quiz question, but set the grade to be 0. I did it as a quiz question as there are matching type questions, multiple choice, etc. and I found it valuable to have the structure in place to add in the content. The reporting preferences are set up as to report back slide views only, but when this file communicates with the LMS, it is reporting back a pass/complete but giving a grade of 0. I'd like it to show up as n/a under the grade rather than 0.
Also, this course isn't booking marking and learners aren't happy because when they go back in their answers aren't saving. As well, the client wanted backward movement to be allowed but when the learner clicks the back button to go back through the slides, it automatically resets the question slides and they have to re-answer them to continue. Is there a way to change a setting so that the answers will stay in place?
And my last question (promise, sorry for so many) under the quiz settings and then required there are 4 options. I'm just wondering if anyone can explain these 4 options and what each do, so that I can make sure I'm selecting the best one. Up until now it's been a trial/error type of thing, but it would be great if anyone can share some additional info.

Thanks so much! I'm the only one working in Captivate, and so I can't even tell you how helpful it is to have replies and people that understand what I'm asking.
I looked into the manifest file, but I couldn't seem to find the masteryscore text. Here's a copy and paste of my manifest file. Am I missing something?
<?xml version="1.0" encoding="UTF-8" ?>
<manifest identifier="captivate client and family centred care_ID" version="1.3" xmlns="http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:imscp="http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:adlcp="http://www.adlnet.org/xsd/adlcp_v1p3"
xmlns:imsss="http://www.imsglobal.org/xsd/imsss"
xsi:schemaLocation="http://www.imsglobal.org/xsd/imscp_v1p1 imscp_v1p1.xsd
      http://www.adlnet.org/xsd/adlcp_v1p3 adlcp_v1p3.xsd
      http://www.imsglobal.org/xsd/imsss imsss_v1p0.xsd
      http://ltsc.ieee.org/xsd/LOM lomStrict.xsd">
<metadata>
<schema>ADL SCORM</schema>
<schemaversion>CAM 1.3</schemaversion>
<lom xmlns="http://ltsc.ieee.org/xsd/LOM">
   <general>
    <identifier>
     <catalog>Adobe Captivate Course</catalog>
     <entry>captivate client and family centred care_ID</entry>
    </identifier>
    <title>
     <string language="x-none">captivate client and family centred care_Course_Title</string>
    </title>
    <description>
     <string language="x-none"></string>
    </description>
    <keyword>
     <string language="x-none"></string>
    </keyword>
   </general>
   <lifeCycle>
    <version>
     <string language="x-none">1.0</string>
    </version>
    <status>
     <source>LOMv1.0</source>
     <value>final</value>
    </status>
   </lifeCycle>
   <metaMetadata>
    <identifier>
     <catalog>test</catalog>
     <entry>test 1000</entry>
    </identifier>
    <metadataSchema>LOMv1.0</metadataSchema>
    <metadataSchema>SCORM_CAM_v1.3</metadataSchema>
   </metaMetadata>
   <technical>
    <format>text/html</format>
    <location>.</location>
   </technical>
   <educational>
    <typicalLearningTime>
     <duration>PT0H0M</duration>
     <description>
      <string language="x-none">Average length of time to experience this Adobe Captivate Project.</string>
     </description>
    </typicalLearningTime>
   </educational>
   <rights>
    <cost>
     <source>LOMv1.0</source>
     <value>no</value>
    </cost>
    <copyrightAndOtherRestrictions>
     <source>LOMv1.0</source>
     <value>no</value>
    </copyrightAndOtherRestrictions>
   </rights>
   <classification>
    <purpose>
     <source>LOMv1.0</source>
     <value>idea</value>
    </purpose>
    <description>
     <string language="x-none"></string>
    </description>
    <keyword>
     <string language="x-none">Adobe Captivate</string>
     <string language="x-none"></string>
    </keyword>
   </classification>
</lom>
</metadata>
<organizations default="captivate client and family centred care_ID_ORG">
<organization identifier="captivate client and family centred care_ID_ORG">
   <title>captivate client and family centred care_Course_Title</title>
   <item identifier="captivate client and family centred care_ID_SCO" isvisible="true" identifierref="captivate client and family centred care_ID_SCO_RES">
    <title>captivate client and family centred care_SCO_Title</title>
    <imsss:sequencing>
     <imsss:objectives>
      <imsss:primaryObjective objectiveID="PRIMARYOBJ" satisfiedByMeasure="false">
      </imsss:primaryObjective>
     </imsss:objectives>
     
     <imsss:deliveryControls completionSetByContent="true" objectiveSetByContent="true"/>
    </imsss:sequencing>
    <adlcp:dataFromLMS>.</adlcp:dataFromLMS>
    <adlcp:timeLimitAction>exit,message</adlcp:timeLimitAction>
   </item>
</organization>
</organizations>
<resources>
<resource adlcp:scormType="sco" identifier="captivate client and family centred care_ID_SCO_RES" type="webcontent" href="captivate client and family centred care.htm">
   <file href="captivate client and family centred care.swf"></file>
   <file href="captivate client and family centred care.htm"></file>
            <file href="SCORM_support/scorm_support.htm"/>
            <file href="SCORM_support/scorm_support.js"/>
            <file href="SCORM_support/scorm_support.swf"/>
</resource>
</resources>
</manifest>

Is there a way to create or use a "slide viewed" variable?

Hi, I would like to write a conditional action based on whether or not a learner has visited slide. I realize I could write an individual variable for every single slide, but that would be a very slow and manual way to set this up. From a logic perspective, I wanted to set up a single project action that would look something like this.
If "slide viewed" = no, then do this...
If "slide viewed" = yes, then don't do anything.
Theoretically, it would seem possible since you can show a checkmark in the TOC next to a visited slide, but I can't quite figure out how to apply this to my project actions.
Is something like this possible in Captivate 6 or 7?

Disclaimer: I've only tried this with a couple slides, with very little error checking, but here's a single action approach I came up with.
First I created a tracker variable. Then I labelled each slide with a single, distinct letter/number/character. (Not sure if there are any characters you should stay away from; maybe someone else can tell you which ones might cause problems as a slide name/label). So you might run out of letters/numbers/characters if you have a ton of slides. If you have enough unique, one-letter names, however, this is the logic behind the advanced action:
If slide_tracker contains cpInfoCurrentSlideLabel
Then: continue
Else: do whatever you want it to do
slide_tracker = slide_tracker + cpInfoCurrentSlideLabel
So basically, if we've already been to this slide, the slide label will already been appended to our tracker variable. Thus it will contain the unique letter/symbol/number, and will do nothing (continue). If we haven't been to this slide, then we can do whatever we want to do and update the tracker to reflect that we've now been to this slide.
Again, a disclaimer: I spent only five minutes trying this out, so there may be unforseen issues with it.

Captivate 5.5 is setting a Mastery Score in the Manifest when using Slide Views

We have encountered a problem with Captivate 5.5 where it is setting the Mastery Score in the manifest to match the Quiz score setting even though we are only using slide views to track completion. This is a problem because if we set the score to zero, our Saba LMS will immediately grant the user credit for the course on the first slide. If we set the score higher than zero, the user will never get credit for the course as Captivate doesn't send a score to the LMS when using slide views to track completion. Our LMS seems to ignore the status passed by the course once the Mastery Score is set. We have compared the manifest behavior in 5.0 and it does NOT set the Mastery Score. We can edit the manifest prior to loading in the LMS but this is a hassle and we'd like to figure out a way to permanently change the behavior to no longer set Mastery Score when using Slide Views to track completion.

Hi,
I believe the easiest way to do this is to edit the manifest.xml file in the Captivate Templates folder. I posted instructions on doing that here: http://forums.adobe.com/thread/956390?tstart=0
Hope this solves your issue. V

SCORM 1.2 and Saba - Reporting a 0 Score for Track Slide views

Good morning,
We have just transitioned over to our new LMS, Saba. To say the transition has been rocky would be an understatement. So, here is what I am dealing with:
I have a very basic reader course where I want to grant someone credit once they have viewed all slides. I am using SCORM 1.2 and setting either "User Access Only" or "Slide Views Only." If I use slide views, I set it to 1, it sends a 0 score to the LMS, even if the user views all slides. I have been able to create a fix by assigning a point value to a click box or button at the screen where I want the user to get credit. However, this does not seem to be what was intended.
Below are screen shots of my publishing commands, Saba screens, and communication report between Saba and CP.
Content Communication Log with Saba
Content Communication Log
July 14, 2011 5:34:43 AM PDT
Command Received = LMSInitialize
Content Item: Super_Instructor_Role
July 14, 2011 5:34:43 AM PDT Response data (Data sent by Saba LMS to content) =
cmi.core.student_id = EEFIELDS1
cmi.core.student_name = Fields, Eric
cmi.core.credit = credit
cmi.core.entry = ab-initio
cmi.core.lesson_mode = normal
cmi.launch_data =
cmi.suspend_data =
cmi.core.lesson_location =
cmi.core.lesson_status = not attempted
cmi.core.score.raw =
cmi.core.score.min =
cmi.core.score.max =
cmi.core.total_time = 00:00:00
cmi.comments =
cmi.comments_from_lms =
cmi.student_data.mastery_score =
cmi.student_data.max_time_allowed =
cmi.student_data.time_limit_action = exit,message
cmi.student_preference.audio = 0
cmi.student_preference.text =
cmi.student_preference.language = 0
cmi.student_preference.speed = 0
July 14, 2011 5:34:45 AM PDT
Command Received = LMSCommit
Data sent by content to Saba LMS:
cmi.core.lesson_status = completed
cmi.core.lesson_location = 0
cmi.core.exit =
cmi.core.score.raw = 0
cmi.core.score.max = 0
cmi.core.score.min = 0
cmi.core.session_time = 00:00:01
cmi.suspend_data = A1Enone%24nP000AA000AA
cmi.student_preference.audio = 0
cmi.student_preference.language = 0
cmi.student_preference.speed = 0
cmi.student_preference.text = 0
cmi.comments =
July 14, 2011 5:34:45 AM PDT Response data =
error=0
July 14, 2011 5:34:59 AM PDT
Command Received = LMSFinish
Data sent by content to Saba LMS at the time of exit:
July 14, 2011 5:34:59 AM PDT Response data =
error=0
Any help would be greatly appreciated.
Thanks,
Eric Fields
Sr. eLearning Consultant
Coventry Health Care

I would suggest you try using Percent instead of Score, and set the Slide View completion percentage to 100 instead of 1.
Change Reporting Level to Score instead of Interactions and Score.
You haven't shown the screen for Quiz > Pass or Fail settings, but you need to set the passing percentage there to 100% as well if you intend that the learner must view every single slide.
Bear in mind that when using slide views, if you have any navigation buttons on the slides that are set to jump to the next slide when clicked, then the learner does not get a completion mark for those slides. In Captivate you have to watch a slide all the way to the last frame in order to get it marked as completed. If for some reason you need to get slides marked as completed despite not being viewed (e.g. when using branching) then you can use our TickTOC widget to gain credit for those slides that are missed or not watched to the end.
http://www.infosemantics.com.au/ticktoc
If you suspect that not all slides will be viewed, you can adjust the Pass/Fail percentage to something less than 100% to allow for the missed ones.
Try these changes and see if it works.
Once you DO find the settings that allow Captivate to work with SABA I would be very interested to know what they were. I've got a page on my website where I want to show the Captivate config settings for SABA: http://www.infosemantics.com.au/lms_guide/saba I don't have access to this LMS myself, but perhaps you or other SABA users on this forum can contribute information to make it easier for others to work with it.

LMS not reporting complete for slide views

Hi,
I am trying to get my captivate projects to report competion status as complete to the LMS based on slide views. For testing I have created a very simple two slide Captivate. Both slides have 3 second durations, one caption each and nothing else, so the whole project runs for 6 seconds without any pauses, quizes or interactions of any kind. I have used SCORM cloud to view the SCORM calls being made by the package, and it is not reporting completion to the LMS.
I am using the following settings in reporting:
Any help will be really appreciated. Im about to watch http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1775550&loc=en_us to see if that can help. My backup plan is to put an interaction on the last slide but that's going to mess with my quiz results for the projects that do include quizzes (This is also why im reporting Quiz Results and Slide Views).
Note: with these settings, passing a quiz causes the captivate to report completion.
Thanks for any help
Andrew Downes

I'm not sure of this and defer to any contrary/additional replies that may follow...but...
Past versions of CP have required some sort of scored interaction in order for the lesson to properly report via SCORM to the LMS.
If you have a CP lesson without any scored interactions (no 'reporting'), that may be why completion is being recorded to the LMS.
SO try setting up one scored interaction as you suggest.
For CP lessons that do have quizzes, you won't need that separate scored interaction.
You'll also likely want to change you settings to just 'Slide Views Only' if you just want completion reported based on them viewing the whole project, and I suspect Slide View Completion should be 100, not 10...
Let us know how that goes...
Erik

I need the Adobe Flash Player version 11.1.102.64plug in on my MacAir to view Ustream videos. Adobe message says the version is for Intel-based Macs with Safari; also says that I "may have to temporarily disable antivirus software. is it safe to download?

I need the Adobe Flash Player version 11.1.102.64plug in on my MacAir to view Ustream videos. Adobe message says the version is for Intel-based Macs with Safari; also says that I "may have to temporarily disable antivirus software. is it safe to download?

Your MacBook Air is an Intel-based system. To download the current version (11.2.202.228), go to http://get.adobe.com/flashplayer/ and download it from there.
If there is still a Flash issue, you can try the Google Chrome browser, which has the current Flash built into it, to see if it works any differently with the videos. It's available from https://www.google.com/chrome

Can no longer view video files in Adobe Media Player!!

For some reason I can no longer view video files in Adobe Media Player.
My computer has reverted all my files into one Adobe Flash Player document.
Any help with this would be very appreciated.
Thanks!
Drivera

I have the exact same problem can anybody help us?? But I can not loose any of my videos as I have loads of videos on my college work on student loans without cosigner and it would take me forever to do them again.

Safari: How view video clips without Adobe Flash Player?

In OS 10.7.2 and with Safari 5.1.2 or Firefox 8.x how does one view video without installing Adobe Flash Player? On such websites as that of the New York Tines, I get a "Your System Status" dialogue box that says: "We're sorry! You need to update your Flash Player." A link appears in the dialogue box to "Get Adobe Flash Player." What options does one have?
Thanks for considering my question.
Respectfully, NormN

Macs now do not ship with Adobe Flash installed. Did you buy your Mac with Lion or is your Mac the previous generation? You have to do the installation yourself. Click Get Adobe flash player.

How to track the number slides view on LMS

Hi,
I would like to know how to get a percentage of slides view on a LMS platform.
For example, I don't know how to get a percentage of 5 if I see 5 slides of 100 slides.
I don't know if it's possible with Captivate and if there is an option for that.
On our LMS, we get 0, 50 or 100% but we would like to get a more precise result.
I tried on SCORM CLOUD too and only get 0,00%.
Do you guys have the solution?
Thanks in advance for your help.
Vanessa
PS: I'm not native english so sorry if I made some spelling mistakes (I'm French). I wanted to post here because you find more answers on english forums than french forums.

There is not a SCORM value for slides viewed. What SCORM field/value are you seeing this percentage in?
Also, what version of SCORM are you publishing?
You would need to alter the scormdriver.js file in order to post the results that you want. I am in the process of writing a blog to change CP's bookmarking behavior. With this code it would be fairly simple to add some code to display the info in the comments (SCORM 1.2).

How do I view XMP metadata in Adobe Reader?

How do I view XMP metadata in Adobe Reader?
I've created a PDF which (I believe) includes XMP metadata, and I'd obviously like to check that it's been done correctly. However it's not obvious how to view this within Adobe Reader (I'm using 11.0.04 on OS X). Googling around, I've found an off-hand remark that Reader isn't able to do this, but this is obviously insane -- what's the point of licensing metadata if no-one can see it? What is it I'm missing?
Best wishes,
Norman

I've put a PDF at http://nxg.me.uk/temp/part1.pdf This does display/print perfectly OK in both Reader and in OS X Preview. I presume that the /Root object (254) is inside one of the ObjStm streams (yes?), as (presumably) are the /Page streams and the reference to the /Metadata object, 52.
Regarding scanning, Part 3 of the XMP spec, Sect 1.2 says "It is always best to use format-aware file parsing when possible. Lacking this information, applications can find XMP packets by scanning the file." Also, in Sect. 1.2.1, "A file should be scanned byte-by-byte until a valid header is found." Finally, ISO-32000-1 Sect. 14.3.2, Note 3, says "[The XMP spec] includes a method to embed XML data within non-XML data files in a platform-independent format that can be easily located and accessed by simple scanning rather than requiring the document file to be parsed." So it would appear that this metadata packet _should_ be found.

How do I view videos that need Adobe Flash Player on my iPad?

How do I view videos that need Adobe Flash Player on my iPad? If this device does not support Adobe Flash?

Skyfire is Not the answer! Bad reviews and you have to pay to try.
I used Puffin Free Browser. Worked perfectly with a 14 day free trial for Flash. It worked well for Flash videos so I would buy the full version.

I am having trouble viewing PDF's with Adobe Reader XI

I am having trouble viewing PDF's with Adobe Reader XI

I am using Windows 7 home edition and using Internet Explorer 10
The PDF's are online on websites that I am trying to open. Both on the site as well as trying in a new window.
Thank you
Jeff

Slide Views Measurement/Analytics in Adobe Learning Dashboard

Similar Messages

Maybe you are looking for