Slider doesnt seem to be good scrubbar

So I have been attempting to use a hslider for a scrubbar
using raw video and UIComponent in flex 2.
Using the slider control as a seekbar doesnt seem efficient
to the below.
livedragging doesnt seem to work well because there are too
many calls to seek. onchange is the same, and turning livedragging
off to get the event once (rather than continuous) is not good
either - you want the scrubber to be more responsive. dragcomplete
seems to be the correct action, however the slider disregards the
action. The sliderthumb is documented to have this action, however,
it seems the slider thumb disregards the action too.
Should i not use the slider control. what other control is
there. Anyone?

Mikes1 wrote:
Draining a lithium ion battery untill it is nearly empty is not a good idear
In fact if you run it totaly empty it will be damaged beyond repair. The idear this calibrates the battery is wrong. This type of battery likes to be topped up oftern it will however take a week or so of use befour reaching peek efficiency
You are 100% incorrect.
Please read the Apple advice on batteries here:
http://www.apple.com/batteries/iphone.html
It specifically states:
_Use iPhone Regularly_
For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. _*Be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).*_
Not sure that can be much clearer.
Ian

Similar Messages

OS X 10.8.3 says it brings redeeming gift cards with webcam on mac app store, doesnt seem to work for me?

Updated to OS X 10.8.3,
While updating i read the notes about how you can now redeem gift cards with the built in webcam on the Mac App Store, Opened it up and Clicked Redeem > signed in la di da, and it doesnt seem to work for me.
Specs:
MBP 13 inch, Early 2011
8 GB Ram, 320 GB HDD
FaceTime HD Camera
Intel HD Graphics 3000
Help thanks

Hi ChuckN,
I have installed the update at home on an older 27" iMac, a new retina macbook pro 15", an older macbook air and a recent 21" iMac and on none of them does the redeem by camera option show up.
I would say to our north American friends this is something that has been working for you for a while and has only been announced as available in AU with the latest update for our region this week. Sadly updates don't always work straight up.
I am hopeful there is something I have not turned on but think I may need to wait for another update.
good luck Chuck!

Battery doesnt seem to be charging

As the tittle ays really. My IP4 battery doesnt seem to be charging.
Last night I allowed it to run completely flat until it switched itself off so it could calibrate the battery.
Plugged it in to charge and went to bed. Some 9 hours later, switched it on and it's only showing 3% ... Yep the mains was switched on lol
Defuncd battery maybe? Not sure as it seemed to take ages for the battery to run flat

Mikes1 wrote:
Draining a lithium ion battery untill it is nearly empty is not a good idear
In fact if you run it totaly empty it will be damaged beyond repair. The idear this calibrates the battery is wrong. This type of battery likes to be topped up oftern it will however take a week or so of use befour reaching peek efficiency
You are 100% incorrect.
Please read the Apple advice on batteries here:
http://www.apple.com/batteries/iphone.html
It specifically states:
_Use iPhone Regularly_
For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. _*Be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).*_
Not sure that can be much clearer.
Ian

HT4060 my ipad doesnt seem to want to take a charge..dead battery...dumbfounded

my ipad doesnt seem to want to take a charge...any ideas..thanks
mikey

Have you tried the 5Rs?
try to rest-by holding the menu and the center button for a few seconds. Then try to re-charge it.
Good luck-

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
MacBook Pro:
Vendor Name:    Apple, Inc.
Device Name:    MacBook Pro
UID:    0x0001000A17016E60
Firmware Version:    22,1
Port:
Status:    No devices connected
Link Status:    7
Port Micro Firmware Version:    FFFF.FF.FF

You are correct, here is what Apple Says:
http://support.apple.com/kb/TS3775
I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

ITunes Track CPR doesnt seem to be working

I have been trying to use the track cpr script to find some "lost" songs that arent really lost... the script doesnt seem to be doing much of anything when I run it.... this is on 10.6.4 with itunes 9.2.1
Results:
iTunes Track CPR
Total tracks: 18
Total MIAs: 8
Recovered: 0
Still MIA: 0
I know the files are are in the proper itunes style folder structure... im stumped why this isnt working. maybe my itunes version is too new??

have you tried toggling the hold switch...if that doesn't work, restor ipod nano (plug in nano, got to ipod updater, click restore [i may have the first otwo steps switched, so if is doesn't work, try with step 2 first])...if that doesn't work either, go to an apple store (if there is one near you)to get it replaced...if you don't live near one, send it in to apple (since so many people have problems that apple doesn't identify when they send it in, put a small note in the package

Labview doesnt seem to be re-using memory

I have a high speed hardware timed DAQ program (Labview 6.02) that gathers syncronous counter/timer information for a short period of time. Due to the shear volume of data and the speed at which it is gathered It is buffered and then saved to disk. Upon completion of the acqiusition the data is pulled from the disk and processed (x-Y graphs, FFT etc). If I try and do another acquisition the program doesnt seem to re-use the memory utilised for data and for displaying it in graphs etc. So after a few acquisitions the whole thing can grind to a halt. I have to close the application and Labview and restart it so that the acquisition will run properly and then the things starts all over again. How can I get labview to sort of dump
the data or clear its memory once I have processed the graphs etc. After all the raw data is saved on disk anyway.

> Does anyone know exactly what the "Deallocate memory as soon as
> possible" option does? We are also trying this as a last resort, but
> we have no clue what it is actually doing. For example, will it dump
> data in uninitialized shift registers? Does it unload VIs from memory
> (when you would normally expect them to remain in memory)? Or is it
> just "tidying things up" more quickly than it normally does?
>
This option means that after each subVI call, even those inside of
loops, LV will deallocate all temporary memory buffers. It has no
effect on unwired shift registers, controls and indicators or on the
results of the subVI. Without this option turned on, LV will leave the
buffers allocated waiting for the subVI to be called
again. So, this is
the typical space versus time tradeoff. This has no effect on which VIs
are loaded or unloaded.
Now that you know what it does, this feature can lead to fragmentation
of the memory manager since it so frequently allocates and deallocates
the blocks of memory. There is nothing wrong with the feature, but most
memory managers can't deal with this and with certain VIs, it can result
in more memory being used than when it is turned off.
Often the "memory problem" is better solved by getting rid of global
variables and local variables and making more subVIs. It is hard to get
more specific, but the user manual used to have a chapter on performance
that explained some of it.
Greg McKaskle

HT4972 im trying to update IOS version, have done everything as recommended. however, it doesnt seem to be working, when i try to buy a tune i am again prompted to update to new IOS version... can you offer any advice

im trying to update IOS version, have done everything as recommended. however, it doesnt seem to be working, when i try to buy a tune i am again prompted to update to new IOS version... can anyone offer any advice

Is this an iPhone or iPad question? You posted in the iPad forum.
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Purchase code number doesnt seem to work, it says invalid

purchase code number doesnt seem to work, it says invalid

Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." for contact options.

BBC iPlayer - This content doesnt seem to be working

Hi all, I have tried so many fixes but cant seem to fix the problem
When I log into my user and go on the BBC iPlayer website and click on any video, it loads perfectly fine.
However, when my mum logs onto her user account she cant play any videos.
The message that comes up for ANY video is 'This content doesnt seem to be working. Try again later'
This message never shows up on my side of the computer.
We have an iMac 2GHz Intel Core 2 Duo,
4 GB RAM,
Mac OS X Lion Version 10.7.4,
The newest version of Flash installed (obviously because it works on my side)
The newest version of Safari installed
I have tried removing Flash from the computer then reinstaling it.
I also tried repairing disk permissions through Disk Utility.
I even tried deleting the Safari preferences in Library.
I tried reinstalling Safari
I tried installing 'click to flash' to see if it would convert it to HTML5 but that didnt work. So I deleted the extension.
It will load fine in Chrome & Firefox. So we can assume with this that its a problem with my mums Safari.
Does anyone have any ideas on how to fix this or has anyone had this happen to them?
I do realise the easiest solution would be to just watch BBC iPlayer stuff on another browser or download the BBC iPlayer App and watch videos through there but thats a hassle when it used to work in Safari and actually works in Safari on my side of the computer.
Thanks in Advance.

Never mind, after all that and searching loads of forums & discussions it turned out that it was little Snitch and its 'plugin process' turned off.
switched it to allow and its working now.

Subwoofer doesnt seem to work on new envy model 4-1203sa

as in title, doesnt seem to work, only bought the laptop today from pc world. the laptop was a display model, is there any way i can test the speaker? i have the beats audio interface too but i cant hear no bass

Hi Dylan5084,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 4-1203sa Sleekbook and sound issues. Here is a link to troubleshoot the sound.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Podcasts doesnt seem to work on ios 7

podcasts doesnt seem to work on ios7

You are not allowed to make posts related to issues with beta software here.
Just follow sted's advice, unless you signed up your UDID and don't have a developer account of your own (Like I did ), which then you cannot do anything about it.

Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

Welcome to the Apple Community.
Are you also trying to re-open it on the same device as you edited it.

I have a home computer with purchased itunes music and I want to transfer to my Iphone - how can I do this (syncing doesnt seem to work

I have a home computer with purchased itunes music and I want to transfer to my Iphone - how can I do this (syncing doesnt seem to work

Syncing is the only way. Explain what you mean by "doesn't seem to work." Exacty, what did you do and what happend.
Are you sure your iPhone is signed into the same iTunes Store account as iTunes on your computer?

Since firefox upgraded to 33,0 in the google search if I clicked it would come up with sites i have used , it doesnt seem to do that anymore , anybody know why

There seems to be some item similar to my query but not quite, what is similar is in my question when using the google search box , you used to be able to click and it would show sites you have used, this doesnt seem to work anymore , you have to try a letter but the site that are suggested are not what i use,
Anybody have any idea what may be causing this or is it something to do with the settings in options , i tried that but could see anything that i could change .
thanks for any help

hi happy80, i think this is because the search box on the homepage or a new tab will now show you suggestions provided by google once you start typing...

Slider doesnt seem to be good scrubbar

Similar Messages

Maybe you are looking for