Slider in UI5

Hello Experts,
     I just started UI5 developing, I want to create a slider like below pic shows, the color shows the level, for score 0~50 is low level, 51~80 is medium level, above 81 is high level.
the slider will stop at the level according to the level that the scores stays.
I know how to create a slider, but how should the color above the slider be created? and how to connect the color and the value of the score level?
Please help...
Thank you very much.

For the colour I think you will need to create you own renderer for the slider control.
https://sapui5.hana.ondemand.com/sdk/#docs/guide/OnTheFlyControlDefinition.html
Regards,
Jason

Similar Messages

  • On Screen Keyboard Glitch in Tablet Mode - On Screen Keyboard minimizes / disappears / slides down

    Hi there -
    New Yoga owner here ( just bought it yesterday) and within minutes of setting the computer up I noticed that the on screen keyboard was malfunctioning when the yoga is in tablet mode. Specifically, it pops up for about a second and then, without me touching or clicking or doing anything, it quickly slides back down. repeated attempts to bring up the keyboard end up, frustratingly, with the same result. what is perplexing to me is the on screen keyboard works fine in laptop mode (when I need it least).
    Someone else already started a post on this BUT it was marked as 'solved' (which it wasn't) so I figured I'd start new thread. The solution on the previous thread was to simply 'refresh' windows to get rid of any new drivers that were downloaded since purchasing the yoga, but I did not download or update anything prior to this problem arising (as I said, the problem seemed to occur within a few minutes of turning the machine on for the first time). In any case, I tried the refresh and it did not work so clearly my problem is not that I downloaded an incompatible or faulty driver. Please Help! I love this machine and I'm trying to see past the other flaws I've noticed so far (subtle screen flickering, inconsistent touch sensitivity etc), but this issue is starting to really undermine my confidence in the product quality and, from a productivity standpoint, it is a real deal breaker to not have full tablet functionality.
    Solved!
    Go to Solution.

    I had the same problem with the disappearing virtual keyboard within hours of starting to use my new Yoga 13.  I read somewhere that it was a problem with an incompatible Synaptics driver, and when I looked in the control panel, it showed that the Synaptics driver had been updated on my Yoga as of the day I bought it.  I think somehow by agreeing to automatic updates of the software, the Synaptics driver is updated to an incompatible version.   So what I did was I removed the Synaptics driver, using the Windows program uninstaller tool, rebooted, and then found the Synaptics driver at the Lenovo site which is specifically labelled as the Yoga 13 driver.  I installed that, and the keyboard is now working fine.    

  • Using a custom menu button on the slide to open and close TOC in Captivate 7

    HI
    I have a custom menu button. When the user clicks I want to show TOC, ( I see there is a state to show TOC) but when the user clicks the same menu button again on that slide how can I hide the TOC. ie toggle between hide and show.
    thanks

    I described some possible scenarios: Toggle Shape buttons - Captivate 6 - Captivate blog

  • How can I display one line at a time on a PPT slide

    I am using OFFICE for the Mac (2008).
    In the past, I have known how to do this using PPT on a Windows PC..
    But something has changed and I can no longer figure out how to get each line on a PPT slide to appear one line at a time every time I click it.
    It's not that difficult, but I can't figured out where they moved the "Appear" option.
    I am NOT using KEYNOTE, but PowerPoint from OFFICE for the Mac (2008)
    Can someone help me.
    Thanks,
    Tom

    Since this is a Keynote discussion forum, there may be no one here that knows. I personally hate PP and could care less about how to make one line display at a time. It is easy on Keynote and that is all I need to know. You might want to look for a PP forum and ask there.

  • How can I control the music that plays during Apple TV photo slide shows?

    I don't want to make my parents listen to Breaking Benjamin music as they watch my photo slide shows on Apple TV. Need something more sedate. But if a B.B. song is in my iTunes music library, it is a candidate for random selection as background music for my slide shows. How do I control what music plays during Apple TV photo slide shows?

    What I find is really silly, is the fact the music video's are listed under that artists albums in the Music menu. And when you go into the video 'album' (called 'Unknown' unless you change it) there is an option to shuffle the tracks. Clicking this just results in an error message. So, they should either remove that option if it is a video album, or, better yet, GET IT TO WORK. So silly of them to omit this.
    I have submitted feedback.

  • Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

    Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
    My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
    I tried using flickr and powerpoint as a work around but no luck.  I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file.  I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set.  It still displays everything, pics and the wmv file at the default 3 sec.
    I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

    Welcome to the Apple Community.
    No that's not possible.
    If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here 

  • HTML 5 code having a jquery slider is working in safari 4 (also other browsers). Its not working in safari 5.

    HTML 5 code having a jquery slider function is working in safari 4. It is also working in IE9, IE8, Firefox 13. In Safari 5, it is not loading. Also CSS is not loading correctly. Its showing failed to load 

    HTML 5 code having a jquery slider function is working in safari 4. It is also working in IE9, IE8, Firefox 13. In Safari 5, it is not loading. Also CSS is not loading correctly. Its showing failed to load 

  • How do I turn off and on the icon size slider bar at the lower right status bar of a folder window.

    I have been trying for days to help a friend with a new iMac to turn on the icon size slider bar that on my iMac appears at the bottom of ever folder when it is open when in the "view" > "icon" mode.  I cannot find anything that discusses this slider bar.  I can turn this status bar off and on on both my machine and my friends machine, but I cannot turn off or on the slider on either machine. 

    This did not help.  I am a Mac User since 1984 and generally I am never stymied buy the Mac OS, but this one has me.   I can open and close the lower status bar, as you described, and that works fine for me because I have the icon slider bar already there and it works fine; however when I open the lower status bar on my friends machine there is no icon size slider bar, and I can't seem to find out how to get it there, as it is on my machine or at all. The icon size can be controlled from the View menu, but as a photographer, it is really handy to have it at the bottom of the folder window.  Thanks for trying. 

  • How Can I Make TouchEvent.TOUCH_BEGIN work for a Slider?

    Hi,
    I'm building an application that has a slider. The slider works great using TOUCH_BEGIN, TOUCH_MOVE, and TOUCH_END events. The problem occurs when the user is touching anywhere else on the screen then uses another finger to move the slider at the same time. The slider will not function. The first touch is being detected by the parent of the parent of the slider.
    I know it has something to do with a TOUCH_BEGIN event being registered by the first touch. But using evt.touchPointID and setting a touchMoveID value (as suggested in Adobe's docs) doesn't seem to have any affect. Also, setting mouseEnabled to false on the slider.parent.parent clip does not help which I really don't get at all.
    Can anyone help me figure this out? Is there a way to ignore the other TOUCH_BEGIN event or a way to prevent it in the first place?
    Many thanks!

    Once I activate the slider with a begin event, the slider moves no matter where I am on the screen. This is because I put the event listener for the move and end events on the stage. The slider is not a component. I built it. I'm using the code under the Touch Point ID section found here as a model:
    http://help.adobe.com/en_US/as3/dev/WS1ca064e08d7aa93023c59dfc1257b16a3d6-7ffe.html
    Thanks for your persistence. I've been at this for several hours today.

  • Insert filename in master slide

    Can somebody tell me how I can insert the filename into the master slide (like you can insert filename in Numberq and Pages) so that when I change my filename it automatically changes also in the master slide ? Many thanks for your help.

    This feature is not available "in thebox"
    You may go to my iDisk:
    <http://idisk.me.com/koenigyvan-Public?view=web>
    and download:
    foriWork:for_Pages:paste_thepath.zip
    It contain two scripts.
    One which pastes the pathname at the Insertion point.
    One which insert the pathname at the end of the document.
    I apologize but at this time I don't know the way to insert at the insertion point
    Yvan KOENIG (from FRANCE lundi 25 août 2008 12:22:02)

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • Content Query Webpart For Slider

    I'm trying to create a simple jquery slider with the help of Content Query Webpart in sharepoint 2013. Can anyone help me on this with a simple video or example like how I can achieve this.

    Hi Sreejith,
    To display the search results as a slider in Content Query web part(CQWP), we can upload the
    JQuery plugin to SharePoint and create a Custom ContentQueryMain.xsl and ItemStyle.xsl to render the results.
    Here are some examples about the detailed steps for integrating a Slider with the Content Query Web Part in the links below for your reference(same for SharePoint 2013):
    http://www.nothingbutsharepoint.com/2012/06/18/sharepoint-integrate-a-slider-with-the-content-query-web-part-part-1-what-does-my-slider-need-to-work-aspx/
    http://www.nothingbutsharepoint.com/2012/07/10/sharepoint-integrating-a-slider-with-the-content-query-web-part-part-2-setting-up-my-content-source-aspx/
    http://www.nothingbutsharepoint.com/2012/08/27/sharepoint-integrate-a-slider-with-the-content-query-web-part-part-3-integration-with-the-cqwp-aspx/
    https://www.pena.id/2014/08/adding-slider-sharepoint-using-content-query-web-part-cqwp/
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Can not use TOUCH function on Nokia 6600 slide

    Can not use TOUCH function on Nokia 6600 slide-
    turned on sensor in phone settings, but when i touch the PHONE it does not work.
    Please, tell me how use this function or maybe my phone is out of order

    As long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
    Tapping
    The tap function allows you to quickly
    mute and reject calls and alarm tones, and
    to display a clock just by double-tapping
    the back or front of the phone when the
    slide is closed.
    Select Menu > Settings > Phone >
    Sensor settings to activate the tap
    function and vibration feedback.
    Mute calls or alarms
    Double-tap the phone.
    Reject a call or snooze an alarm after
    muting it
    Double-tap the phone again.
    Display the clock
    Double-tap the phone.
    (If you have missed calls or received new
    messages, you must view them before you
    can see the clock.)
    Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
    I hope this makes it clearer for you.
    Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf

  • Windows slide under Menu Bar

    I've noticed recently that I can make application windows slide under the Menu Bar.  Some slide under then 'snap' back into view when I release the mouse button holding the window down.  Others that don't display the grey bar at the top of the window (like the iTunes mini player for example) don't 'snap' back into view.
    Anyone else have this issue or offer a solution?  I am running 10.8.5.  Thanks.

    Render at least standard sized previews for all photos prior to displaying in the slideshow.

  • How to set up slider mobile menu widget on master and pages of mobile website in Muse

    Adobe Muse Slider Mobile Menu Widget by MuseThemes
    I am new to mobile website design and Muse, I love this widget, but I am not sure how to set it up on multiple pages.
    Do I put it on the master? Content covers it when it is on master, so I could use some help.
    Thanks so much, anyone know of tutorials or can anyone give me a game plan to set up. thanks so very much!

    Thanks, my issue was that the content was in front of the navigation menu see screen shot (taken in preview in Muse)

Maybe you are looking for