Slider type effect advice - is it possible (not how)

Hi,
Im considering purchasing a slider for my camera as a I want to achieve perfect parallel movement to say a square object like a table.
Was hoping to get some advice from the experts as to wether this could be possible to achieve the same thing in After effects before outlaying any $$$?
I have a stabilised handheld so was thinking maybe some positioning & warp stabilizer might do the trick.
Thanks in advance
Todd

warp stabilizer is nifty, but it cannot perform miracles!!!
if it could... nobody would sell sliders, steadicams, tripods, etc!!!!!
still... you should do some warp stable tests and see if you're satisfied !!!
i work with a shooter that occasionally uses an arc slider that's
controlled by electric motor... quiet, smooth, precise and repeatable!!!
great for matching elements in composite work!!!
hahahahahahahahahaha!!!

Similar Messages

On my iCloud account I can see an alternate email ID which can be used to login to my account, this email ID does not belong to me so I need to delete it. Please advice the best possible way as it does. It show any option to delete that ID

On my iCloud account I can see an alternate email ID which can be used to login to my account, this email ID does not belong to me so I need to delete it. Please advice the best possible way as it does. It show any option to delete that ID

Do the alternate e-mail address ends with me.com or icloud.com?

Abap report103 movement type is done and 105 is NOT done.

HI,
Requirement need materials for which 103 movement type is done and 105 is NOT done.
Scenario: - Material comes in company means we do movement 103 for that. after that we do movt. type 105 for that material. I want those material document list that had 103 but not 105.
Means material has enters in company but movt. type 105 not done.
Please advice am abap fresher
Regards..
R.Sudhakar

Is possible Query in sap to get this only 105 not release report ?
ANS:
Quary table MSEG,
Check the table content with BWART = 105
Get the EBELN Nos.
Pass the EBELN into EKKO Table, Get the value of Field FRGKE.
if FRGKE <> 'G'.
ie. Document not yet released.

Type effect question

Hi everyone,
I'm trying to replicate the type effect (upper arc and lower arc combined) that's shown in the example below in Illustrator. So far, my attempts haven't been fruitful. The example might be hand-drawn and there might not be a way to do it in illustrator but I still wanted to ask and see if anyone has an answer. Any help is much appreciated. Thanks so much.

Effect > Warp > Bulge and enter a negative value for the top slider.
Or Object > Envelope Distort > Make with Warp > Bulge and enter a negative value for the top slider.

Since changing our computer I have been unable to download ebooks to my Reader Library I get a message Some file types associated with EPUB files are not associated with Reader Library; Waterstones suggest that I may have accidentally created a new Adobe

When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?

Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others.

RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

Condition type MWST tax code A1 does not exist

Hi all,
I'm facing the problem while I'm releasing Billing doc to Accounting. This is the error
Condition type MWST tax code A1 does not exist
Message no. FF762
Diagnosis
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
System Response
The specified amount cannot be posted in FI.
Procedure
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
I have already checked FTXP, and the Tax Code is already there.
I have already checked the condition record, and it is already there,
Maybe I have missed something...?
Thanks before for all your help
Regards,
Rizki Harris

Hi Typewriter,
1. Check in a previously created invoice, accounting document - the tax code? (FB03) is it A1?
   --> the tax code is A1
2. In VK12, MWST do you have other values of % tax (e.g. 0%). In a sales order, give appropriate Tax classification values for CMR, MMR so that MWST value = 0. Create invoice and check if you are getting the message
   --> in VK12 for Key Combination Domestic Taxes :
        TaxCl1Cust   TaxCl.Mat     Name                                 Amount     Valid from    Valid To         Tax Code
        0                    1                  Tax Exempt Full Tax                          25.07.2011   31.12.9999    A0
        1                    0                  Liable For Taxe No Tax                        01.01.2008   31.12.9999    A1
        1                    1                  Liable forTaxeFull Tax              10       25.07.2008 31.12.9999    A1
     --> I still don't understand what do you mean by CMR, MMR ?
3. Condition type MWST is not allowed to be processed manually..
Regards,
Rizki Harris

How do you make imessage work? The icon is there. You can type in the recipient but are not allowed to hit the send button

How do you make imessage work? We upgraded to verision5. The icon is there. You can type the message but the send button is not available.

There is some instability in iMessage. It is a versatile and confusing app even though there are so few options in its use.
I had issues trying to get iMessage work on both my iPads and my iPhone.
ON the iPhone, turning off WiFi service and then trying iMessage fixed the problem.
On the iPad 2, same thing. Turning off WiFi service fixed it.
On the iPad 1, I took a suggestion from zoomzoom and changed the WiFi network configuration on the iPad to use 8.8.8.8 as a DNS server and then use iMessage. That fixed it. Now I put the DNS back to default and it still works.
I suspect the iPod Touch will have the same fix as the iPad.
If you have a WiFi and 3G iPad or iPhone, try turing off WiFi and see if that fixes it.
Why? (beware, some of this is guesswork)
iMessage can talk SMS to cellphones and smartphones (that are using the cell-network). It can also talk Apple iMessage format to iPhones and iPads whether they are on cell-network or on WiFi. If you are talking to an SMS cellphone, iMessage figures that out and blindly sends your message. If you are talking to a iOS5 device, iMessage figures that out too, checks to see that they are on-line, and then does something different if they are or are not on-line. If you type in an email address, and not a phone number, I think iMessage attempts to see if the email address is registered with Apple (or iCloud or whatever) and if it is not, it does something to let you know, possibly by making the Send button not light up.
In order to register iMessage and an email, you have to let the iOS device see whatever service it is that iMessage uses. That is where the problem happenes. zoomzoom suggested manually setting the WiFi DNS to google's 8.8.8.8 IP address, then run IMessage, and that seemed to fix the problem. Setting the iOS device to use 3G-only (by turning off WiFi) also fixed the problem. I suspect going down to StarBucks or McDonalds and using their WiFi would also fix the problem. Once the problem is fixed, it doesn't seem to come back so I can't test these 'fixes'.
To change the DNS on your iPad find your WiFi networks configuration, click on the blue arrow, touch DNS, backspace over the number that is shown, type in 8.8.8.8 Then click on the WiFiNetworks button at the top of the screen. Now go run iMessage. After that, you can delete the DNS entry again and leave it blank. Your iPad will fill it in from the WiFi router when it needs it.

A small but very irritating bug in Mail: after pressing the spacebar after typing an apostrophe in a word such as "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.

When composing an email in Mac Mail I've noticed a small but very irritating bug: pressing the spacebar after typing an apostrophe in a word, e.g. "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.
Any ideas?

I just recreated this problem on my iMac (wired KB, no wireless KB) by changing Mail > Preferences > Composing > Spellcheck from "as I type" to "never". Then type a contraction ending in 're and the space bar causes the cursor to jump back as others have stated, to the spot 'r|e
Next, I went into System Preferences > Keyboard > Text, and turned off "use smart quotes" and the problem went away again.
From this point (smart quotes off, spell checking never), if I turn Smart Quotes ON, the problem returns.
The problem is dependent on the state of both settings.
The spacebar in Mail "works" if I have either of the following setting combinations:
Keyboard: smart quotes OFF, Mail: check spelling ANY SETTING
Keyboard: smart quotes ON, Mail: check spelling AS I TYPE
Other combinations FAIL
Keyboard: smart quotes ON, Mail: Check spelling NEVER
Keyboard: smart quotes ON, Mail: Check Spelling WHEN I CLICK SEND
Looks to me like there's a bug in Mail > Preferences > Check spelling > NEVER and WHEN I CLICK SEND that interacts badly with Keyboard > Smart quotes ON.
Thanks.
Todd Smithgall

I want to add image in column is it possible then how to add image in data base what data type we need to do

I want to add image in column is it possible then how to add image in data base what data type we need to give we required any casting please show me one example
jitendra

Hi again,
Several points that can help more:
1. If you are working with Dot.Net, then I highly recommend read the first link that you got! This is nice and simple coding. Another option is this link which is even better in my opinion:
http://www.dotnetgallery.com/kb/resource21-How-to-store-and-retrieve-images-from-SQL-server-database-using-aspnet.aspx
2. As i mention above both link use the column's type image. There are several other option of working with Files. In most of my applications architecture I find that it is better to use a column which let us use any type of file and not an image column.
In choosing the right column's type for your needs basically your fist question should be if if you want to store your data inside relational database environment or outside relational environment. It is a good idea to look for blogs on this issue. Next
if you chose to store your data inside then you need to chose the right column type according to your server version. I highly recommend to look for blogs on the differences between those column's types: IMAGE,
Check those links:
To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
http://research.microsoft.com/apps/pubs/default.aspx?id=64525
FILESTREAM feature of SQL Server 2008
http://msdn.microsoft.com/library/hh461480
FileTables feature of SQL Server 2012
http://technet.microsoft.com/en-us/library/ff929144.aspx
Compare Options for Storing Blobs (SQL Server)
http://technet.microsoft.com/en-us/library/hh403405.aspx
Binary Large Object (Blob) Data (SQL Server)
http://technet.microsoft.com/en-us/library/bb895234.aspx
Managing BLOBs using SQL Server FileStream via EF and WCF streaming
* Very nice tutorial!
http://petermeinl.wordpress.com/2012/02/20/managing-blobs-using-sql-server-filestream-via-ef-and-wcf-streaming/
[Personal Site] [Blog] [Facebook]

Why do I lose type effects

Why do I lose type effects on my printed page such as emboss, bevel and drop shaodow (in Photoshop CS6) when I save my file as a jpeg or pdf?

Most likely you simply have your printing/ PDF options set to not rasterize non-vector data and since al lthese effects are pixel-based, you simply lose them. Just enable that option and everything should be fine.
Mylenium

Condition type MWST tax code S0 does not exist

Hi, Pls advice how can I eliminate that idoc error message:
"Condition type MWST tax code S0 does not exist"
Should I maintain tr VK13 as well?

Does S0 exist in FTXP?
If not create it there?
If it does, check the config to make sure it picks up a GL account and account key MWS

Type array? Is it possible?

Hi,
i want to know is it possible to have the array of the
specific type? (in declaration)
For example
public function test( items:Array) ...
in this example i can't force user to put an array of a
special type.
for example in java
for 'static' array
public void test( MyItem[] items)
or
for 'dynamic' array
public void test ( ArrayList<MyItem> itmes )
These examples are type-safe.
Is it possible to do it Action Script

quote:
Originally posted by:
levancho
use metatag :
[ArrayElementType("your.object.type")]
private var yourArray:Array = new Array();
thanks for reply.
i think this is a hack. This works only if i specify "all
values" of the array in my mxml file.
But if want to do it dinamically - doesn't works. This is not
the same like in java (typed array) :(

Error-- Condition type MWST tax code A0 does not exist

I have an Invoice and it didnu2019t pass for accounting entry.
The error is promptu201D Condition type MWST tax code A0 does not existu201D, It never came at the time of Sales order creation.
Diagonosis says the following
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
Procedure says the following thing
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
Please guide.

Christiano,
First let analyze the situation.
1. Execute Tcode VA02 --> Item Details --> Conditions tab --> Click Analysis button. Try to find for condition Type MWST whether values are flowing.
If it is not there then you have not maintained condition record.
2. Tax Code.
Execute FTXP Tcode , Check For A0 Tax code check whether you have maintained any value. if yes then check in condition record, whether you created record with Tax Code - A0
If everything above is perfect and correct
3. Check Copy Controls and Pricing type
Check the Validation period (it should not be the problem)
Check and Revert
Regards
Sathya
Edited by: Sathya Pavan Yedavalli venkata on Apr 21, 2009 2:06 PM

Display "Application over 20MB" when I type OK button, the appearance will not go away and make me unable to open other applications, what to do and whether it must be restarted

display "Application over 20MB" when I type OK button, the appearance will not go away and make me unable to open other applications, what to do and whether it must be restarted?

The 20 meg message is the download limit for 3G. If you can't get rid of the 'OK' message then you can do a reset by pressing and holding both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You should be able to download the apps by switching to wifi on your iPad or downloading them on your computer's iTunes and syncing them or dragging and dropping them over to the iPad device.

Slider type effect advice - is it possible (not how)

Similar Messages

Maybe you are looking for