Slides from Keynote (not about the audio issue)

Am I correct in assuming that Keynote slides exported with the "interactive" command should be interactive in iDVD?
When I open the .mov file in QuickTime the slides play fine with the (start and stop) interactive control. But when I bring the same .mov into iDVD, the slides misbehave. The first two or three slides flip over very fast, then the show stops.
What gives? Could this be because I'm using the trial version of Keynote?

DVD media is not really 'interactive' and so Keynote presentations intended for iDVD are merely slide shows - you set the image duration and transition duration - and don't allow you to 'click' anything to advance to the next slide.
Note that when you Export a presentation from Keynote, if you choose QuickTime you are given the Interactive choice, but if you choose iDVD there is no Interactive choice.
On your computer, a Keynote presentation exported for Quicktime with Interactive selected lets you click to advance to the next slide. A Keynote presentation exported for iDVD opens in a traditional QT movie window and runs straight through the entire movie with no interaction.
Sorry, but DVD playback doesn't work this way.

Similar Messages

About the screen...not about the screen issues going on

I was playing around with a friend's iphone today. It was the first time I had ever seen an iphone up close and I noticed that the screen kinda looked a lot like it was one of those fake screens you sometimes see on dummy phones in a verizon or cingular store. I know the ipod touch has the same screen but I wanna know from some one who has their Touch already, does the screen look just like the one on the iphone? I really like the iphone's screen

I don't have an iPhone or a Touch, but from what Steve told everyone, the SAME screen in used on both systems.

Files recently downloaded from Canon Legeria FS306 do not play the audio. Can hear audio on camera or downloading same files to a PC. Also hear audio on earlier files downloaded from same camera to iMovie '11. How do I avoid problem & recover lost audio?

Files recently downloaded from Canon Legeria FS306 to iMovie '11 do not play the audio. I can still hear audio on the camera or by downloading the same files to a PC. Can also hear audio on earlier files downloaded from the same camera to iMovie '11. How do I avoid this problemand recover lthe ost audio?

The first thing to try is to run Software Update (the Update tab in the Mac App Store.). This was an issue a couple of releases ago, and an update seemed to fix it.
If you are already at the most recent version of iMovie, then I don't know how to solve you issue. Maybe someone else will have some ideas.

HT1338 Im trying to watch a film downloaded from Bit Lord, I'm getting 'Error Dolby AC3 Audio". Player does not recognize the audio in this video, how do I fix this?

Im trying to watch a film downloaded from Bit Lord, I'm getting 'Error Dolby AC3 Audio". Player does not recognize the audio in this video, how do I fix this?

Download VLC and try playing the video...
http://www.videolan.org

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.
This has worked fine with MobileMe with only a couple of minor glitches in the past.
Any experience doing this the "right" way?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

"Could not get the audio data from the file" error

Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

Hp pavilion g6-1326sl not work the audio and microphone headset

Good morning ,
I have a problem on my notebook hp pavilion g6-1326sl . It does not work the audio and microphone headset .
I tried to format the computer and reinstall the operating system win 7 , both 32 and 64 bit ( one installed ) . I tried using the drivers from the HP website , IDT audio driver High - definition ( HD ) 6.10.6341.0 rev . But the loudspeakers of the PC are combined with headphones ( loudspeakers / headset ) .
The reproduction of the sounds takes place together , and inserting the headphones do not come off the speakers pc .
In addition skype does not work in any way , selecting any internal and external microphone , using headphones and without .
You know help me to solve the problem ?
thanks

Hi @twin1981 ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion g6-1326sl Notebook and issues with Skype and a Headset. Here is a link to troubleshoot Headsets in Windows 7.
What is the Manufacturer of the Headset?
Here is a link to Skype help under the Technical issues.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
Neither will install.
Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
My only issues are audio.
Here they are:
1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
In Windows 7 the mic part of the trrs headset does not work.
3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
I need these audio aspects to work properly though!
I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
It doesn't. This has been a nightmare of problems.
Is Apple going to step up to the plate and make good on their promises?
Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
If you are an Apple tech person or an Apple user that can help on these issues, please do!
Thanks, Dr. Duke
An American profesor in Europe.
PS I will post this under Imac windows 7 updates without a reinstall and under
imac Sound issues.

On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
Here is my last two cents in to the inquiry.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

Dynamic parameter selection from infoview not storing the sql password

We are having the problem of dynamic parameter selection from infoview not storing the sql password as it does for the actual report. We are using Crystal Reports XI Release 2 version 11.5.3.438 (Not sure of SP level, asked in separate thread).
To be more specific.
We have created a report that dynamically populates the parameters of the report by pulling the records from the Informix sql database and allowing selection from there.
In the Central Management Console for the report object we have set as follows:
Process - Database:
Use original database logon information from the report - the sql username and pw etc
Use same database logon as when report is run
Process - Parameters
In selecting a default selection there is the option to put in the sql password, however, this does not stick and clears after update.
As such the end result is that every time this report is run from infoview and a user chooses a parameter (there are 5), crystal goes through some timeout for about a minute or so and then requests the sql password, if a user then selects the next parameter, the same timeout and password dialog appears.
We need the crystal report to handle to the sql password for fetching the parameters as well as for the database section of running the report, however, the parameters insists on the end user always putting the password in.
This is 100% replicatable on our system.
Any way that we can fix this?
Will an update fix this issue? If so could you please advise which one?
Thanks

Hi,
I am having the exact same problem. Any help?
And what does "Use same database logon as when report is run" mean? For me that would be that no prompt is needed for getting values in a dynamic parameter...
Regards
Magnus

About the communication issues in the client-server program

About the communication issues in the client-server program
Hi, I have some questions about the communication issues in a java project, which is basically the client and server architecture. In brief, the client, written in java, can be deployed anywhere, and in the following part, assume it is in the LAN (Local Area Network) which is connnected to the internet through the firewall and/or proxy, and the server, written in
java too, simply provides the listening service on a port in a remote machine. And assume the server is connected to the internet directly so that the scenario can be simple to focus on the core questions.
My questions are as follows:
1 About the relationship between the communication port and protocol
Generally, protocols at the application level like HTTP, FTP have their own default port, e.g., HTTP is corresponding to 80,
FTP is to 25. But it is NOT necessary for the web server to provide the HTTP listening service at port 80, right? E.g, Tomcat provides the HTTP listening service at 8080. So it means the default relationship between the application protocl and their port is some routine, which is not necessary to follow, right?
2 Assume a LAN connected to the internet through a proxy, which only allows HTTP protocol, then questions are:
2.1 Does the proxy recognize the HTTP request from the client by the port number (carried in the request string)? For example, when the server provides the HTTP listening service at 80, then the request from the client will include the port number 80, then the proxy will parse such info and decide if or not the request can be out.
2.2 Does the proxy recognize the HTTP request from the client by protocol (carried in the request string)? For example, the protocol used in the communicatin should be included in the request, then the proxy can parse it to make the decision.
3 In java programm, if using the HTTP protcol, then on the client: the corresponding API is java.net.URLConnection, right?
If using the TCP protocol directly, then on the client:the corresponding API is java.net.Socket, right? In both cases, the server side use the same API, java.net.ServerSocket?
Is it correct to say that the communication by Socket is faster than URLConnection?
4 Take MSN messenger for example, which protocol does it use? Since proxy configure is only the possible option, so I guess generally the TCP protocol is used directly so that the better perfomrance can be achieved, right?
5 Given 3 computers within the same LAN, can the client, proxy, server environment above be correctly simulated? If so, can
you recommend me some typical proxy program so that I can install it to configure such an enviroment to perform some test?
6 I guess there should be some software to find out which port number a given program/process is going through to connect to
the remote machine, and which port number a given program/process is listening on? Also, what protocl is used in the given
communication.
7 Finally, regarding each of the above questions, it will be highly appreciated that if you can recommed some references,
tutorials, books etc. In summary, what I care about is how to enable the java client behind the proxy and firewall to
communicate with the remote server without problems, so if you know some good tutorials plz let me know and thx in advance!
Finally, thanks for your attention so such long questions =).

FTP is to 25. But it is NOT necessary for the web
server to provide the HTTP listening service at port
80, right? E.g, Tomcat provides the HTTP listening
service at 8080. So it means the default relationship
between the application protocl and their port is
some routine, which is not necessary to follow,
right?Not sure what you're saying here.
There must be a server listening on some port. The client must know what port that is. If you open the connection using the Socket class, you'll explicitly specify the port. If you use some higher level class like URLConnection or something in the commons Net package, there's probably a default port that will be used if you don't explicitly specify another.
There's no way for the client to know that the HTTP request will go to port 80 instead of port 8080. If you think the the client contacts the server without explicitly naming a port, and then asks the server "get me your HTTP server", and the port is determined from that, you're mistaken.
Not sure if you're thinking that, but it sounded like you might be.
2 Assume a LAN connected to the internet through
a proxy, which only allows HTTP protocol, then
questions are:
2.1 Does the proxy recognize the HTTP request
from the client by the port number (carried in the
request string)? For example, when the server
provides the HTTP listening service at 80, then the
request from the client will include the port number
80, then the proxy will parse such info and decide if
or not the request can be out. I'm not sure, but I think most proxies and firewalls are configured by ports. I thought I'd heard of more sophisticated, higher-level ones that could understand the content to some degree, but I don't know anything about those.
3 In java programm, if using the HTTP protcol,
then on the client: the corresponding API is
java.net.URLConnection, right?That's one way.
You might want to look into this:
http://jakarta.apache.org/commons/httpclient/
If using the TCP protocol directly, then on the
client:the corresponding API is java.net.Socket,
right? In both cases, the server side use the same
API, java.net.ServerSocket? A Java client will user Socket, and a Java server will use ServerSocket and Socket.
Is it correct to say that the communication by Socket
is faster than URLConnection?Probably not.

It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, w

It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!

Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT201272 I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help

I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help.

Audiobooks are currently a one-time only download from the store. If you don't have it on your computer (audiobooks go into the Books part of your iTunes library) nor on a backup, then if it's still in the store you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

After exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
(note: remember what you changed it from so you can change it back later, before you import another CD)
Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

IOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done?

iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.

iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer. Anyone have an idea what needs to be done? The only solution we have found is to reboot the iPad. We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes.

HT1386 I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work.

I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work. I've tried more than several times to get help but nothing helps. Do I need to deauthorize the ipod or perhaps erase all the downloaded ipieta stuff and start over?
Thanks for any suggestions

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

Slides from Keynote (not about the audio issue)

Similar Messages

Maybe you are looking for