Slides go blank after 1 second

I've created slides in PowerPoint 2010 and imported to Captivate 6. I've added the audio narration in Captivate. Everything appears to be fine, but as I attempt to view the slides from the timeline, each slide goes blank after 1 second while the audio continues. It displays correctly when I preview in the web browser, just not in the timeline preview. It's workable but a nuisance when trying to adjust timings and placement of caption boxes, etc.
I've checked the slide length in Captivate and the slide transitions in PowerPoint... no clue why the slides "disappear" after one second... Any ideas??

Hi Mephis James
There is a small trick ( ahit and trial method) you can perform.
Let's take an example that there are 20 slides in your Powerpoint presentation. Import first 5 slides in Captivate and then preview/publish the project. If the project play fine, then continue with the next 5 slides. Then preview/publish this 10 slides project. If the project play fine, then continue to add the next 5.
At some stage, if you will find out that the project is again showing the same behavior which it was showing before, then try to eliminate slides from Captivate 1 by 1 from the bottom and you will be able to rectify the odd slide which is causing this issue.
Say, slide 15 is causing this issue. So if you import 19 slides out of 20 excluding slide number 15, then the project willplay fine.
Thanks and Regards
VJ

Similar Messages

Pavilion f1703 monitor goes blank 2 seconds after start-up

When the computer is turned on, the monitor only functions for a couple of seconds before it goes blank..power light shows it to be working.
If I turn the monitor off at the front power switch, and turn it back on, the same thing happens..2 seconds of normal then blank.
In the couple of days leading up to this, the screen had a slight "flicker" effect going on.
All ideas greatly accepted!!

I am having the identical problem. I hooked this monitor that a friend gave me and it worked great for several days. There were no flickerings or any indications of a looming problem. Then it started going blank after 2 secs and continues to do that. I did see a warning about the "power saver", or something like that, was in operation. Unfortunately, I can't get it to stay on long enough to go into the menue and see if there is anything I can change there. Any help would be appreciated.

Documents open in reader XI, then go blank after 8 seconds. whether in IE 11, desktop file, or email

Documents open in reader XI, then go blank after 8 seconds. whether in IE 11, desktop file, or email. This happens at home or at work. I would expect that this is a common problem with a simple (to other eyes) answer

Mystery solved.
My .pdf files had been defaulting to Acrobat to open. I just designated Reader as the default for opening .pdf, and am now able to open those files normally.
Apparently, I installed Acrobat but had not yet confirmed my subscription. The installation automatically made Acrobat the default for opening .pdf files, then wouldn't allow documents to be displayed for more than a few seconds before closing itself. I assume that will no longer be the case once the bill is paid.
Thanks for your responses, Pat.

When i open the itunes store, the screen goes blank after 2 seconds so I cant order music

When I open the itunes store, the screen goes blank after 2 seconds, so I cant order any music?

same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.

Set default slide timing to .5 second

Can anyone tell me how to set the default slide timing to 1
second or less? No matter what options I choose, slide timing is
always determined by how long it takes me to click on the next
target. Ideally, I'd like to set the slide timing to be very short,
then have the timing of the objects I add determined slide length.
Thanks for your help,
Julie

Hi Julie and happy HannuChristmaKwanzaYule to you!
There is only one place I'm aware of that any slide timing
default may be set. In Captivate 2, you look at Project >
Preferences... > Defaults tab.
In Captivate 3, you look at Edit > Preferences... >
Project node.
In both places you will find a place to configure the default
slide time. This has no effect on any existing slides and I don't
believe it will factor into the mix when recording. Also it would
appear the minimum limit is one second. The only places this seems
to take effect are when inserting Blank slides and when creating a
Blank project.
Hopefully this helps a smidge! Rick

Screen now totally blank after being on and off intermittently the last few days???

Screen now totally blank after being on and off intermittently the last few days???

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself

Firefox download window blank after macosx upgrade

Hi,
things worked fine on MacBook, macosx 10.4 and Mozilla 3.6
Since I upgraded to macos x 10.6, the Firefox download window still popped up but went blank after a fraction of a second.
Now upgraded to Mozilla 4.0 and the download window is now always blank.
Had a try with Safari, which works fine.
Went through all the instructions in
http://support.mozilla.com/en-US/kb/Downloads%20window%20is%20blank
and problem is still there.

That worked. Thanks very much.

Please help - my N82 realplayer goes blank after 3...

now i know that the N82 may be considered a dated model by todays standards, but bear with me because i finally got one (and a used one at that too). two weeks into owning it and i love it already.
the firmware says:
v31.1.0.16
09.12.08
RM313
i've spent days checking out available add-ons, installing and uninstalling them (also hugely due to the advice i only discovered about installing to the phone memory for better performance). so i've pretty much got it up to the kind of phone i can be proud to carry around.
i face one problem - realplayer goes blank after 3 seconds of playing any video.
i did all these:
- dragged and dropped videos from my pc to phone storage (My Videos)
- copied videos to phone memory (My Videos also)
- converted the videos to mp4, and also 3gp using xilisoft converter before transferring
- tried using Nokia Nseries Video Manager. gave up because it was so user-unfriendly. i could only copy back to pc; i could not find any way to convert and transfer to phone in there
none of these could make realplayer play videos past 3 seconds. i could hear audio though.
the strange thing is realplayer plays when i click on a video in file manager. it does not auto rotate to landscape mode, and does not play more than the file i click on.
can someone help me? sorry i had to post here. i googled for answers, saw a lot of posts from n95 users saying the same thing but didn't see any solution posted. i could not find anything in the boards here either. i would much rather fix this single issue than to perform an update for fear of losing everything i have done in my phone so far.
thanks in advance

Thank you guys for all your solutions. Problem solved on my own (again).
Despite being smartphones, Nokia phones (well, mine anyway) behave erratically when loaded with applications and games, but most expecially with too many themes onboard.
Install one theme too many and you'll start seeing how badly the N82 copes with performing as it did out of the box.
I've had these few nagging issues, which I solved on my own without having to resort to a soft reset or a hard reset or a firmware update or a reformat like everyone suggests without thinking, THANKFULLY.
1. Realplayer doesn't display video in landscape mode
- Bring the number of installed 3rd party themes down to a minimum
- start uninstalling applications, beginning from the most recent one, and check realplayer each time.
2. Multimedia button won't bring up Gallery
- Bring the number of installed 3rd party themes down to a minimum
- Restart phone and see if it does the second time around
- Uninstall the most recent application/s and check again
3. "Help" is not accessible from the menu. It says "Memory full" every time
- Bring the number of installed 3rd party themes down to a minimum
- Start uninstalling applications again, and recheck.
4. Camera recording works fine for 10 seconds, then it stutters every 5 seconds
- If you are using a new memory card like I did, just perform a format from the phone and not the computer before using it. I used it without formatting it so it was my fault.
(but I cannot believe I had to find this solution outside the Nokia boards)
Do I hate my N82? No, I love it.
Do I hate encountering problems on my phone? Of course I do.
It's a great phone, capable of delivering more than other phones if you exploit it like I do, but I wish the developers have the decency to put up a list of common problems and fixes for the phones they roll out, not leave it the hands of discussion board "wizards" and "gurus" to solve your mistakes.

My screen goes blank after I see the white start up screen

My screen goes blank after I see the white start up screen

What kind of iMac do you have? A PowerPC G3, G4, G5, or an Intel-based iMac? What OS are you using? OS 9, OS 10.2.x Jaguar, 10.3.x Panther, 10.4.x Tiger, 10.5.x Leopard, 10.6.x Snow Leopard, 10.7.x Lion, 10.8.x Mountain?
This particular forum is for older PowerPC G3, G4, G5 iMacs running OS 10.5.8 or older. If your iMac was made after 2006, then you have an Intel-based iMac.
That being said, here are a few tips to try:
Option 1
Restart the computer while holding down the Option key. This will tell the computer to look for bootable drives. If it finds your normal startup disk, select let, then click the right pointing arrow to boot up the computer. Now open up System Preferences> System> and select your normal Startup OS as the default startup disk.
Option 2
Reset your PRAM. Press and hold down the Command Option P R keys while starting your computer. You will hear the startup chime. continue holding down those keys until you hear the startup chime a second time. Release the keys. If the computer restarts, you will need to reset your Date and Time. It might be time to replace your PRAM battery.
Option 3
Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer. Let it sit for one minute. Press and hold the power on button on the back of the iMac while plugging in the power cord. Release the power on button. Count to five, the press the power on button again.
Option 4
Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer. (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.)
Continue holding the C key until you see the OS starting to load. DO NOT do an OS installation. At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility. On the left side of the window that opens,select your normal OS drive. Click First Aid at the top middle of the window if it isn't already selected. Click Repair Disk from the lower right area of the window. When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
When that is done, quit Disk Utility. From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk. Restart the computer. If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
Good luck.

Windows 8.1 Boot Camp Screen is blank after boot

I installed Windows 8.1 Pro on my Macbook Air mid-2012 running 10.9.5 Mavericks and Bootcamp Assistant to create the install usb and download the windows drivers. After booting however, the screen always goes blank after the windows logo. I've tried an external monitor with no luck. I've verified I have the latest SMC and EFI firmware installed. I've tried using external usb keyboard/mouse. I've scoured the web for other things to try, but most people with this problem say you need to update your EFI, but mine is already updated.
I was able to boot into the 8.1 install via VMware fusion. That worked since it was using the VmWare video driver.
I've been unable to get 8.1 to boot into safe mode. Does anyone have an idea of what could be going on?
Jonathan

Are using a USB3 drive? If yes, please find a USB2 drive be able to load the KVM drivers. The Windows installer does not have a USB3 driver.
If you have installed Windows using EFI Boot, you will run into Graphics/Audio issues.

Screen goes blank after a few mins, no matter what I do

I have a slight problem: I ran an update, which brought me a brand-new shiny kernel and a brand-new shiny xorg-server. It took me a few days until I bothered to reboot my computer and after that things got hairy.
After a few minutes, screen goes blank.
I set a screensaver of my Gnome desktop to 2 hours, no effect.
Power manager sliders have exactly to positions: 2 hours 1 minute and never, neither one has any effect on this.
I said 'xset dpms force on', no effect.
Even when I try to watch a movie with mplayer, screen still goes blank after a few minutes (usually mplayer inhibits this kind of stuff).
Now, I find it really hard to believe that this could be any hardware issue, after all, if video card or display would be faulty, I would probably either get a picture on the screen or don't get a picture on the screen, not some unwanted screen suspend every few minutes.
So I have to assume it's a software thing. Kernel doesn't seem very likely to be the guilty one, so I guess it is that steaming pile of crap we know as xorg-server, which got upgrade from 1.6.1 to 1.6.1.901 (sounds like wannabe-1.6.2), to be take the blame here.
There is no 1.6.1 package in the cache or in any repos I checked, so hard to downgrade. Of course I could hack some pkgbuild from AUR and install that, but somebody told me that I would probably also have to compile drivers against that so if that's correct (is it?), then I would consider that as a last option.
Any ideas?

http://bbs.archlinux.org/viewtopic.php?id=70733&p=1

Why did my external HD monitor go blank after working fine while hooked up to a new MacBook Pro?

Why did my external HD monitor go blank after working fine while hooked up to a new MacBook Pro? I have the Moshi adapter and HDMI hooked up to the 27 inch monitor. It was working fine and when I came back after lunch the monitor was blank but the MacBook Pro screen was fine. Could it be the adapter?

could be, try powering down the mac, with the exmonitor connected and see if it is recognized

Screen goes blank after 10 secs when i access hotmail

my screen has been going blank after 19 secs when I open Hotmail or the farmville game. The audio however is fine but the screen turns blank (grey).
This problem started after I downloaded IOS 5 for my iPad on the imac and then synchronised my itunes from iMac to iPad. I alsoactivated i Cloud.

Yeah, I think it must just be an insanely infrequent occurrence, since no one on here has replied in a couple days besides you. I know the screen is supposed to stay on the entire time that there is an incoming call from the lock screen now, since I had a chance to ask a few friends that just got iphones as well. I'm thinking a restore would fix the problem, although I think I'm just going to wait until there is an update, which I would assume would be soon, before I do the restore, since its just an annoyance and not a problem.

Faces in Photos showed up blank after the upgrades

Faces in Photos showed up blank after the upgrades (no labeled faces at all) with the suggested faces mostly full of 100's of blank white circles. I used to have about 50 faces labeled with about 2500 photos. Now I have no labeled faces on top of page (completely blank) and only 9 face suggestions on the bottom. Photos also runs very slowly compared to iPhoto. I tried re-installing and re-upgrading and have gotten the same results. I'm using a Mac Pro (2009), OS 10.10.3, 2.66 GHz Quad-Core Intel Xeon, 16 GB 1066 MHz DDR3 ECC, 7 GB storage. Any help will be appreciated and even if I have to delete the Face's database and start all over, where do I find that database or file to delete?

1. Copy and paste is a very good way of moving chunks of text around, however, it's not really good for moving a Library containing many thousands of files. Drag and Drop is rather more reliable.
it comes up with a black circle and a "!" image.
2. The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Error after second level approval in ESS leave request

Hi Experts
I am using custom workflow for Ess Leave request process which is copied from WS21500001.
I have added custom class methods to change status from approved to sent.
Then another method i have set next appovaer.
The problem i m facing is that I am getting an error on portal after second approval approves the request.
i.e Field syomol has not been assigned yet.
from st22 i found its generating from
Include LPT_ARQ_REQUEST_UIAF06 - Form   execute_approver_update
By debugging i found that Its not getting next approval with status T as there is only first approval with status 'A'
This results in unassigned field symbol. and then error.
Please help me resolve this issue.
Please confirm why next approver is not found in method.

Hi All
Thanks for your reply.
I checked why it was giving a dump.
This execute_approver_update subroutine takes approval data from table ptreq_approver .
I filled this with resp actor id after request is approved and status is changed to sent.
For every emp its unique actor id is saved in ptreq_actor table agaist his pernr.
   SELECT SINGLE actor_id FROM PTREQ_ACTOR INTO actor_id WHERE objid = nextApprover_pernr.
    wa_appr-mandt = sy-mandt.
    wa_appr-request_id = Request_ID. "Req.requestID ( from Workflow )
    wa_appr-version_no = version_no. "Req.Version ( from Workflow )
    wa_appr-seqnr = seqnr. "Same as version no but in char
    wa_appr-approver_ins = actor_id. "Employee actor id from ptreq_actor
    wa_appr-status = 'T'. "Manual
    append wa_appr to it_appr.
    INSERT PTREQ_APPROVER FROM TABLE it_appr .
    commit work and wait.
This resolved my issue.
Thanks

Slides go blank after 1 second

Similar Messages

Maybe you are looking for