Slides in Simulation Stop After First Slide

After I published a training video as a swf file in Captivate 5, it only plays the first of 193 slides. It does not automatically move forward to the next slide with audio. What am I doing wrong?

Hi all
Hopefully Lilybiri will forgive my intrusion into her thread.
From what I'm seeing it would appear that during recording you selected both Demonstration as well as Simulation modes. You also mention FMR, but because things are pausing and you don't want them to, I'll assume you aren't talking about FMR here.
Note that when you choose multiple modes of recording, you are creating multiple projects. A demonstration does just that. Plays through as you are seeming to want. No pausing. A simulation pauses as it attempts to provide a simulated experience for your end user.
It sounds like Captivate is presenting the Simulation first. You are seeing this and assuming it's the only project? Look at the tabs when you finish. There should be more than one. One should be a Demo and the other a Simulation. If you have closed things and restarted Captivate, look at your recent projects list. You should see the Demonstration there.
Hope this helps more than hinders... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

How to stop after first loop operation over?

Hi friends.
How to stop after first loop operation over?
I have a loop operation in module pool program.
After first loop over I want to stop.
I used the STOP keyword, but it is going to dump.
Thanking you.
Regards,
Subash

Hey,
The statement STOP is forbidden in methods and, since release 6.10, leads to an uncatchable expection during the processing of screens called with CALL SCREEN...
As they said above, use a EXIT statement to fix this DUMP...
Regards,
Diogo Carvalho

Why Does Movie Stops After First Clip?

I created an iMovie from about 20 clips but once saved the movie stops after the first clip. How do I get it to run full length without having to insert Transitions?

BlueMovie,
It sounds like you only have the first clip selected (highlighted in blue).
Click somewhere above the timeline so that no clips are selected. Now your movie should play in its entirety.
Matt

Java regex stop after first occurrence

When using code like the following:
while (matcher.find()) {
string1=matcher.group(1).trim();
System.out.println(charset);
the program goes on looking all through the input string and prints out the final match.
What should be done to find the first occurrence and to stop searching through the input string after the first match has been found? i.e. I want to exit the while loop after the first match is found.

The first .* in your regex matches as much as it can at first, and becuase you used the DOTALL flag, it's able to gobble up the whole remaining string. Then it starts backtracking, trying to match the rest of the regex, and it has to backtrack almost all the way to beginning of the string again before it gets back to the META tag where it's supposed to match (unless it finds a false match elsewhere first). That's just an example of greedy quantifiers at work; by calling it a loop you sent us all barking up the wrong scent trail.
Making that dot-star reluctant is not the solution though; the regex would then match everything from the first occurrence of "<meta" to the first occurrence of "charset", where "charset" could be in a separate META tag or just hanging loose later in the string. Getting rid of the DOTALL flag might restrict the match to just one META tag, but you can't count on that. Try this: REGEX = "<meta\\s[^<>]*?charset=([^\\s\"]+)";
pattern = Pattern.compile(REGEX, Pattern.CASE_INSENSITIVE); // the only flag you need{code} Also, if you aren't familiar with this website, you'll probably find it useful:
http://www.regular-expressions.info/

MDT 2013 Windows 8.1 Task sequence Stops After first Reboot. login

Hi There,
The issue I am having is that After the OS gets laid down, and the Windows 8.1 computer reboots, The task sequence does not continue. It fails everytime. There are not any obvious errors that happen in the process that I can see in the logs. But I have
customized this process quite a bit and I could use some help. We are deploying potentionally to over 30,000 computers.
The test machine I have been using is the Surface pro 2.
The interesting part is after a failure is if I start the process over again , boots into PE, then run diskpart manually from command prompt to Clean Disk 0, and then reboot and start the MDT task sequence, it will deploy fine.
I also have a custom step that copies the TS media from the stick to a Recovery partition I create. The user can launch a -re-image or MDT refresh from an Icon/script, which will unhide this "recovery partition", and kick off a lite touch refresh.
This works succesfully everytime. We have remote locations with very slow links, so MDT over the network or MDT integrated with SCCM is not an option at this time. So this is the solution.
I am attempting to use MDT 2013 to deploy Windows 8.1 Offline, and using GPT partitions.
I am using a custom Format and partiition Step, that call the CustomDiskpart.txt script from %deployroot%\Scripts.
I am also using a Split image, as multi partitioned EFI/NTFS USB sticks are not a possibility for us , also, the USB sticks capable of this are seen by MDT as a "fixed drive" anyways. Which can cause issues in itself. So the LTIAPPLY.wsf has
been edited to search and apply ther split .swm files. This works well.
After the Task sequence failure I have tried launching the Litetouch scripts from the C:\MINNINT folder manually to continue the sequence, but it doesnt do anything.
I don't want to always be running Diskpart manually before imaging a new OEM computer. I needa second pair of eyes on this.
Thank You in advance!

Hi,
Thanks Again for taking a look.
I checked the sysprep log in the image and they look fine. No errors.
As requested here are some logs. Let me know if I can provide anything else.
BDD.log
litetouch.log
SMSTS.log
Im not actually attempting to provide a recovery image. What I am doing is leveraging MDT to refresh the computer remotely. We can update the MDT media on the hidden data partition,when required and kick it off remotely. Some of the computers are very
remote, and without SCCM DP's, plus a combination of slow links and a lack of deskside techs made this a requirement. This works without incident.
The only issue I have is on a new computer if I run the sequence (offline USB media) it will fail the first time, unless I run a diskpart clean in PE first.. Then it will succeed. Refreshing the computer is fine.

In New iTunes how do I play a whole album - stops after first song

In iTunes 11.0.1 (12) I select Music in upper left of window, select Albums, click on an album, click on > to play and get the first song and then it stops.

Make sure Preferences, General, View (Edit > Preferences on PC) "Show list checkboxes" isunchecked.
Albums will then play normally then by just clicking them in Songs or Albums views.

HP 2550 Color Laser Jet stops after first page

I've uninstalled the old drivers and reinstalled new ones for Snow Leopard, but my 2550 crashes after printing page 1 of a document from any of several programs. The red alert light comes on, as if there were a paper jam (there isn't). I have to open and close the front door and wait while it goes through its startup routine. Then it may print page 2 only to crash again, or it may simply crash without printing anything. Is anybody else experiencing anything like this with HP printers?
I have to say, I totally regret installing Snow Leopard. My Adobe CS3 programs crash regularly (Premiere is almost unusable). QuickTime Player X and Player 7 (you have to have two now) no longer recognize the TOD files from my JVC camcorder. The best available fix for that is iVerio for Leopard ($75), which is quite unstable on Snow Leopard. I recognize that Adobe is being greedy, JVC is being stupid and HP is living in some Windows-centric dreamworld, but this is ridiculous. I love Apple, but they can't just point fingers at everybody else this time. In my experience, Snow Leopard is a disaster.

Thanks, Barry. Sorry for the rant, but this has been a highly frustrating upgrade -- a first with Apple for me. Part of my frustration is that I have already uninstalled and reinstalled the drivers in several times, in several different ways, but the problem persists. I'm not trying to be argumentative or accusatory about this, and your larger point is well taken. But several of the most important things I use my computer for have been disabled by this upgrade, and I had no idea that was coming. The only issue I'm looking for help with right now is printing. My printer is supposed to be supported, but I can't make it work in several days of trying. I'm just looking for a workaround. (Rant alert: Why does HP make fifty or more different printers that all do basically same thing but require unique drivers?) I guess maybe I have to repost my question under an assumed name when I calm down. But thanks for responding, Barry.

Mac OS 10.4 Install Stops After First Disc

I'm trying to do a fresh install of mac os 10.4 on my mac mini g4. I restarted the computer with Disc 1 and booted up while holding C. I went under options and chose to do a fresh install. After it checked disc 1 the install began. After it finished with disc 1, it restarted and then it gave me the message, "Please insert the 'Mac OS X Install Disc 2' disc to continue installation. (You have chosen to install software that requires this disc)."
This is where the problem is, I insert Disc 2 and after about 10 seconds, it spits it back out. Nothing on the screen changes.
I've tried restarting it, inserting disc 1 again, restarting the installation process, and restarting while holding C with disc 2 in. None have gotten me past that message.
The discs I am using are the ones that came with the Mac Mini (two gray discs).
Any help would be greatly appreciated!

Hi there, That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
http://support.apple.com/kb/HT1442
So start over,

Shuffle stopping after first track

When I put my iphone 3gs onto shuffle it plays one track and then returns to the home screen. Sometimes it thinks about playing a second track and you hear the slightest bit of it as the phone is returning to the home page but then its gone. Any help would be appreciated.

well, to see what your query is producing in the CFDUMP, it
should actually be :
<cfdump var="#regionInfo#">
This will show everything that is produced by the query and
tell you if it is pulling the proper rows, just like in the DB.
If it is generating the proper data in the CFDUMP at this
point, you output to your users with the <CFOUTPUT
query="regionInfo"> tag using the columns that you want to
appear inside it.
i.e.
<CFOUTPUT query="regionInfo">
#regionInfo.categoryID#, #regionInfo.regionID#<BR>
</CFOUTPUT>
** I placed a BR tag at the end because if there is more than
one row it will run together without any type of separation. Once
you know the output is running properly, you can format the output
as required.

Mail stopped after first iPhone sync

I have a POP mail account that has been working great with Mail on my computer for over a year. I synced my iPhone and now, I can send and receive mail from that POP account on my iPhone, but on my computer in the Mail application, that mailbox is stagnant. It does not show any errors or act as if it is not communicating with the server.

Regarding my update, I think that the mail going out may just be through the .mac server and not my POP mail account.
Now my mail account will not work on my iPhone.
And nobody seems to have any input on this. I am I the only one with this problem or just nobody care or is there just no resolution and nobody wants to waste their time?
I

Fix for AppleTV photo slide show music stopping after abut 20 minutes?

Fix for AppleTV photo slide show music stopping after abut 20 minutes?

Just ran another series of tests ... I am now convinced that AppleTV's slideshow/screensaver is broken.
Too often it will 'get stuck' on one photo for minutes then show no photo and finally move on; in fact it is doing it right now.
I don't ever remember seeing this occur before the last upgrade.

How do I stop the first slide to be the name of the Album?

I've created a slide show but cannot figure out how to stop the first slide from being the name of the album against a black background. I'd just like for the first slide in the show, to be the first slide in the show.
Thanks.

I have a similar problem, though not with a title. (I have unchecked the "Show Title Slide" option.)
Why, when I export a slideshow under the Slideshow tab, does it generate a black first slide? How do I get it simply to start with the first photo?

Slideshow stops after ca. 20 slides

I'm new to CS4 Master Collection and using Encore for slideshows. I created a slideshow in six segments and the DVD builds okay with audio, menu and some after effects intro. However, when I play the slideshow back, I get about 19 or 20 slides to advance before the show stops. If I fast forward the DVD player and then immediately hit play, the show begins again after missing typically one slide then progresses smoothly for approximately 20 more slides before stopping again. The slides are all 720x480 jpegs. The same problem occurs in each of the segments. Any help or suggestions would be greatly appreciated!

Yes, the disk image plays correctly using the Apple DVD-player.
I am familiar with the fact that the slower you burn, the better. Therefore I burned the image to one DVD with Apple's DVD-burner at the slowest possible speed of 1x, and another copy using Toast Titanium's best possible writing method.
The oddest thing is that both DVD-disks stop after 7 minutes on the Yamaha-set, but play at a DVD-player integrated in a 'cheap' small tv! There is however a hesitation in the slideshow: it stops for a couple of seconds, but it continues after that! So the no-name DVD-player plays along where the Yamaha-player comes up with a blank screen!
Besides that, the no-name DVD-payer had its trouble with the transitions between pictures, I took them all out.
It seems to me that the vob-files are not 'connected' right, it must have something to do with the burning.
My Mac's DVD player: MATSHITA DVD-R UJ-85J, Revision: FCQ5, Protocol: ATAPI, Sockettype: Intern, Low power polling: Yes

My ipad stops after a few seconds, says slide to power off/cancel. What is the problem?

What could be wrong with my ipad? it stops after a few seconds with "slide to power off" noted.

Settings are OK, but the internal power supply is on the verge of failure. Soon, you will not be able to turn the Time Capsule on at all after it turns off.
Take the Time Capsule to an Apple Store....if you have one near you....to discuss your options.
Otherwise, contact Apple Support.
http://support.apple.com/kb/HE57

HT203167 My iTunes Match does not work, it stops after the first step and won't do anything else!!!

Hello, I purchased iTunes Match for my new iPhone five and it is intended to move the music from my computer to my other computer, but it stopped working on my MacBook Pro, it stopped after the first step. So, my question is, can iTunes Match work if the iTunes in question has other accounts attached to it, of not, can I get a refund on a service that does not work?

I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

Slides in Simulation Stop After First Slide

Similar Messages

Maybe you are looking for